Search

Here, we report our recent progress in the design, fluid thermodynamics simulation, and high-power test of the2nd harmonic cavity for the China Spallation Neutron Source Phase II. A high-performance and large-size magnetic alloy (MA) core was developed as the load material for the radiofrequency cavity to achieve a high gradient of 40 kV/m. The water-cooling structure and cooling efficiency were studied and improved through numerical analysis and thermal experiments. The long-term stability of the cavity, especially the waterproofness of the MA cores with high heat load, was verified by high power tests. [ABSTRACT FROM AUTHOR]

The application of high-power solid state amplifiers (SSAs) in accelerator facilities is increasing, and equipment failure caused by reflected power is the main risk to their long-term operation. High-power SSAs often comprise multiple power amplifier modules. Full power reflection is more likely to damage the modules in SSAs if the amplitudes of the modules are unequal. Optimization of the power combiners is an effective means for improving the stability of SSAs under high power reflection. This study analyzes the mechanisms and conditions of reflected power generation using the scattering parameters of the combiner and proposes an optimization scheme for the combiner. The simulation and experimental results show that some modules may receive reflected power as high as nearly four times the rated power of one module when the SSA meets certain conditions, which could damage the modules. The maximum reflected power can be effectively reduced and the anti-reflection ability of SSAs can be improved by optimizing the combiner parameters to suppress the maximum reflected power. [ABSTRACT FROM AUTHOR]

This paper presents an optimized design and preliminary test result of a high-power input coupler. The design is motivated by five-cell Petra-type cavities operating in the Southern Advanced Photon Sources booster. We optimize the design of the high-power input coupler from the prototype, including the window geometry redesign and multipacting analysis to meet a 250 kW operation power upgrade plan. The cooling system of the coupler is redesigned to achieve a low temperature in high-power operation. Design results fulfill the five-cell cavity operation requirement. The corresponding waveguide and coaxial transition structures are developed and tested. We also describe the coupler's coupling coefficient tests and high-power test plans. [ABSTRACT FROM AUTHOR]