Search

Two problems of the monoharmonic sound wave transmission through a thin rectangular composite plate hinged in the opening of an absolutely stiff dividing wall were considered using the discrete layered damping model of a multilayer plate at small displacements and deformations, with account of the internal damping of layers according to the Kelvin–Voight model. In setting the first problem, it was assumed that the plate located between two semiinfinite spaces and a plane sound wave with a given amplitude value of the pressure is incident on it. In setting the second problem, it was considered that the plate is situated between two absolutely stiff barriers; one of them, owing to the harmonic vibration with a given displacement amplitude of the plate, forms an incident sound wave, while the other is stationary and coated by an energy-absorbing material with high damping properties. Behavior of the acoustic media was described by the classical wave equations based on the model of an ideal compressible fluid. Exact analytical solutions of the formulated problems were constructed. With their help, the sound insulation parameter of composite plate reinforced with carbon fiber textile was studied and the characteristics of its stress-strain state were investigated depending on the frequency of the incident sound wave. It was shown that the mechanics of the deformation of structural elements made of fiber-reinforced composites under high-frequency acoustic impact must be described by refined equations of motion, which have a high degree of accuracy and pithiness, because the stress-strain state formed in them are almost three-dimensional.

The problem of the passage of a monoharmonic plane sound wave through a thin composite rectangular plate hingly supported in the aperture of an absolutely rigid partition has been considered. In this work, two-dimensional equations of motion constructed by reduction of three-dimensional equations were used. These equations were based on a discrete structural model of multilayer plates deformation at small displacements and deformations. Additionally there were taken into account the internal friction of layer materials according to the Kelvin–Voigt model. The behavior of acoustic media is described by the generalized Helmholtz wave equations, composed with the introduction of the complex sound velocity according to Skudrzyk to take into account the dissipation of energy. An exact analytical solution of the formulated problem has been obtained. On this basis, this work studies the insulation properties and the stress-strain parameters of a composite plate reinforced with carbon textile depending on the incident sound wave frequency. In addition to this, the laws that represent the change in the sound pressure in an acoustic medium with a distance from the plate were established. [ABSTRACT FROM AUTHOR]

A discrete layered damping model of a multilayer plate at small displacements and deformations, with account of the internal damping of layers according to the Thompson-Kelvin-Voight model, is presented. Based on the equations derived, an analytical solution to the static deformation problem for single-layer rectangular plate hinge-supported along its contour and subjected of a uniformly distributed pressure applied to one of its boundary planes is obtained. Its convergence to the three-dimensional solution is analyzed in relation to the dimension of mesh in the thickness direction of the plate. It is found that, for thin plates, the dimension of the problem formulated can be reduced on the basis of simplified hypotheses applied to each layer. Аn analytical solutions is also constructed for the forced vibrations of two- and three-layer rectangular plates hinged in the opening of an absolutely stiff dividing wall upon transmission of a monoharmonic sound wave through them. It was assumed that the dividing wall is situated between two absolutely stiff barriers; one of them, owing to the harmonic vibration with a given displacement amplitude of the plate, forms an incident sound wave, and the other is stationary and is coated by a energy-absorbing material with high damping properties. Behavior of the acoustic media in spaces between the deformable plate and the barriers is described by the classical wave equations based on the model of an ideal compressible fluid. To describe the process of dynamic deformation of the energy-absorbing coating of the fixed barrier, two-dimensional equations of motion are derived based on the model of a transversely soft layer, a linear approximation of displacement fields in the thickness direction of the coating, and the account of damping properties of its material by using the hysteresis model. The effect of physical and mechanical parameters of the mechanical system considered and of frequency of the incident sound wave on the parameter of its sound insulation, and the characteristics of stress-strain state of the plate is investigated [ABSTRACT FROM AUTHOR]