Search

Aerators are applied to provide air entrainment and cavitation erosion protections for high-speed flows. By traditional chute aerators in high-head bottom tunnels, it is difficult to maintain effective aeration protection for low-Froude-number and small-slope conditions. The present study explores a wedge aerator design at the bottom outlet, and detailed experimental data on the aeration cavity and the entrained air diffusion were obtained to assess the aeration protection performance. The wedge aerator separates the water flow from the bottom outlet into an upper free jet and a lower flow layer, creating a middle aeration cavity. The flowing lower layer can enhance the aeration cavity stability, ensuring the cross-sectional air diffusion generation downstream due to the flow collision interactions. The flow Froude number and vertical location are the main parameters affecting the air entrainment coefficient, cross-sectional air concentration distribution, and sufficient concentrations close to the chute floor. Optimized wedge aerators are proposed, indicating that the flow interior separation is an effective hydraulic design for bottom outlets in hydraulic engineering. [ABSTRACT FROM AUTHOR]

In melt blowing, microfibrous nonwoven material is manufactured by using high-speed air to attenuate polymer melt. The melt-blown air jet determines the process of polymer attenuation and fiber formation. In this work, the importance of lateral velocity on the fiber was first theoretical verified. The lateral diffused characteristic of the air flow field in slot-die melt blowing was researched by measuring the velocity direction using a dual-wire probe hot-wire anemometer. Meanwhile, the fiber path was captured by high-speed photography. Results showed that there existed a critical boundary of the lateral diffusion, however, air jets in the x−z plane are a completely diffused field. This work indicates that the lateral velocity in the y−z plane is one of the crucial factors for initiating fiber whipping and fiber distribution.

Electro-Fenton (EF) is a promising electrochemical technology in degrading recalcitrant organic pollutants. However, the technology faces problems of high energy consumption, low cathodic oxygen transfer rate and low H 2 O 2 production efficiency. Therefore, a novel air-breathing gas diffusion electrode (GDE) with multiform hydrophobic layers was prepared by a facile method. The novel GDE allows the air to diffuse to the triphase interface spontaneously, eliminating the cost of aeration. Also, the multiform hydrophobic layers can greatly improve the oxygen transfer rate and expand the triphase interfaces in the GDE, resulting in a high H 2 O 2 accumulation of 44.30 mg L−1 cm−2 h−1 without aeration, which was 18 times higher than that of the virgin cathode. A 100% degradation efficiency of sulfadiazine (SDZ) was achieved with the fabricated GDE in 10 min in EF system. Moreover, theoretical calculations were performed for accurately elucidating the SDZ degradation mechanism and pathway. [Display omitted] • Air can diffuse into the electrode spontaneously with high diffusion coefficient. • Multiform hydrophobic layers in the electrode boosted H 2 O 2 accumulation. • The SDZ degradation process was elucidated using theoretical calculations. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Zhejiang University: Science A is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In melt blowing, microfibrous nonwoven material is manufactured by using high-speed air to attenuate polymer melt. The melt-blown air jet determines the process of polymer attenuation and fiber formation. In this work, the importance of lateral velocity on the fiber was first theoretical verified. The lateral diffused characteristic of the air flow field in slot-die melt blowing was researched by measuring the velocity direction using a dual-wire probe hot-wire anemometer. Meanwhile, the fiber path was captured by high-speed photography. Results showed that there existed a critical boundary of the lateral diffusion, however, air jets in the x–z plane are a completely diffused field. This work indicates that the lateral velocity in the y–z plane is one of the crucial factors for initiating fiber whipping and fiber distribution. [ABSTRACT FROM AUTHOR]