Search

Natural silk fiber derived from the Bombyx mori (B. mori) silkworm has long been used as a luxury raw material in textile industry because of its shimmering appearance and durability, and as surgical suture for its high strength and flexibility. Regenerated silk fibroin, as the main protein extracted from the cocoons of the B. mori silkworm, recently has gained considerable attention due to its outstanding properties, including facile processability, superior biocompatibility, controllable biodegradation, and versatile functionalization. Tremendous effort has been made to fabricate silk fibroin into various promising materials with controlled structural and functional characteristics for advanced utilities in a multitude of biomedical applications, flexible optics, electronics devices, and filtration systems. Herein, reverse engineered silk fibroin extraction methods are reviewed, recent advances in extraction techniques are discussed. Fabrication methods of silk fibroin materials in various formats are also addressed in detail; in particular, progress in new fabrication technologies is presented. Attractive applications of silk fibroin-based materials are then summarized and highlighted. The challenges faced by current approaches in production of silk fibroin-based materials and future directions acquired for pushing these favorable materials further toward above mentioned applications are further elaborated.

Among the different nanostructures that have been demonstrated as promising materials for various applications, three–dimensional (3D) nanostructures have attracted significant attention as building blocks for constructing high-performance nanodevices because of their unusual mechanical, electrical, thermal, optical, and magnetic properties arising from their novel size effects and abundant active catalytic/reactive sites due to the high specific surface area. Considerable research efforts have been devoted to designing, fabricating, and evaluating 3D nanostructures for applications, including structural composites, electronics, photonics, biomedical engineering, and energy. This review provides an overview of the nanofabrication strategies that have been developed to fabricate 3D functional architectures with exquisite control over their morphology at the nanoscale. The pros and cons of the typical synthetic methods and experimental protocols are reviewed and outlined. Future challenges of fabrication of 3D nanostructured materials are also discussed to further advance current nanoscience and nanotechnology.

Bidirectional controllable propagation of waterborne sound holds significant importance in developing multifunctional underwater acoustic and mechanical devices. However, the existing waterborne acoustic metasurfaces have rarely explored the bidirectional sound modulations. Here, a class of Janus waterborne acoustic metasurface, enabling two‐faced arbitrarily asymmetric wavefront manipulations is reported. A three‐degree‐of‐freedom mechanical system facilitated by acoustic‐structure interaction underwater is proposed to introduce bianisotropic responses of unit cells. Monolayer ultrathin Janus metasurface is inversely designed by utilizing a function‐structure integrated topology optimization framework. Distinct underwater acoustic functionalities, including axial and oblique focusing, beam splitting, and sound diffusion, are successfully demonstrated. Underwater experiments are further conducted to validate the concept of Janus metasurface. The good consistency between experimental and simulated results confirms the excellent two‐faced asymmetric acoustic focusing performance. The proposed Janus metasurface opens up a new dimension for designing advanced waterborne acoustic devices with two‐faced multifunctional wavefront manipulations. [ABSTRACT FROM AUTHOR]

Among the different nanostructures that have been demonstrated as promising materials for various applications, three–dimensional (3D) nanostructures have attracted significant attention as building blocks for constructing high-performance nanodevices because of their unusual mechanical, electrical, thermal, optical, and magnetic properties arising from their novel size effects and abundant active catalytic/reactive sites due to the high specific surface area. Considerable research efforts have been devoted to designing, fabricating, and evaluating 3D nanostructures for applications, including structural composites, electronics, photonics, biomedical engineering, and energy. This review provides an overview of the nanofabrication strategies that have been developed to fabricate 3D functional architectures with exquisite control over their morphology at the nanoscale. The pros and cons of the typical synthetic methods and experimental protocols are reviewed and outlined. Future challenges of fabrication of 3D nanostructured materials are also discussed to further advance current nanoscience and nanotechnology. [ABSTRACT FROM AUTHOR]

Objective To study the application value of surface electromyography in children with dysphagia. Methods A total of 20 children with dysphagia were enrolled as the observation group, and 20 healthy children, matched for sex and age, were enrolled as the control group. Surface electromyography was used to record the electromyography integral values of the submental and infrahyoid muscle groups in the resting state and the state after water swallowing. The two groups were compared in terms of the electromyography integral values of the submental and infrahyoid muscle groups in the resting state and the state after swallowing 5 mL water. The observation group was observed in terms of the changes in the electromyography integral values of the submental and infrahyoid muscle groups after 1 month of rehabilitation treatment. A Spearman correlation analysis was used to evaluate the correlation of the degree of dysphagia with the electromyography integral values of the submental and infrahyoid muscle groups in the observation group. Results There was no significant difference between the two groups in the electromyography integral values of the submental and infrahyoid muscle groups in the resting state (P>0.05), while after water swallowing, the observation group had significantly higher electromyography integral values than the control group (P<0.05). The observation group had significant improvements in the clinical symptoms of dysphagia after treatment, with significant reductions in the electromyography integral values of the submental and infrahyoid muscle groups (P<0.05). The severity of dysphagia was positively correlated with the electromyography integral values of the submental and infrahyoid muscle groups (P<0.01). Conclusions Surface electromyography is useful in the diagnosis and therapeutic effect evaluation for dysphagia in children. [ABSTRACT FROM AUTHOR]

Background: Enterovirus (EV)-related hand, foot, and mouth disease/herpangina (HFMD/HA) has been prevalent in Guangdong Province, China, since 2010.Methods: Clinical data for EV-related HFMD/HA inpatients admitted to the Department of Paediatrics of Zhujiang Hospital from 2010 to 2013 were retrospectively reviewed. The corresponding EV serotypes were also determined by reverse transcription-polymerase chain reaction or BLAST analysis of the sequenced partial lengths of the viral protein1/5'-untranslated region.Results: A total of 867 eligible inpatients admitted during 2010-2013 were included in the study. Of these, the serotype of the responsible EV was successfully identified in 824 cases. The incidence of enterovirus 71 (EV71) infection amongst pediatric HFMD/HA inpatients decreased dramatically from 55.5 % in 2010 to 8.1 % in 2013, with a similar decrease recorded for coxsackievirus A16 (CVA16). However, the incidence of non-EV71/CVA16 infection increased from 30.0 % in 2010 to 83.8 % in 2013. We noted that the types of infection caused by different EV serotypes varied: EV71 was responsible for 100 % of the paralysis cases (26/26), 84.6 % of the deaths (11/13), and 84.1 % of cases with severe central nervous system involvement (SCNSI) (74/88); echovirus contributed to 16.4 % of the deaths (2/13) and 4.4 % of the SCNSI cases; and coxsackievirus accounted for only 2.2 % of the SCNSI cases (2/90). The clinical features of HFMD/HA cases varied greatly during the time period examined, with drastic changes in the hospitalization rates (45.1, 63.7, 36.4, and 19.1 % for 2010, 2011, 2012, and 21013, respectively), mortality rates (2.3, 0.9, 2.5, and 0.0 %, respectively), paralysis (5.1, 1.2, 5.4, and 0.0 %, respectively), SCNSI (16.8, 7.1, 12.7, and 2.2 %, respectively), and acute respiratory infection (21.1, 22.0, 45.9, and 59.0 %, respectively).Conclusions: The incidences of infection caused by different EV serotypes, along with the clinical features of HFMD/HA cases, changed drastically in Guangdong Province, China, from 2010 to 2013, with the biggest changes observed in 2013. The changed constituent ratios of the different EV serotypes might therefore be responsible for the differences in the observed clinical features of HFMD/HA during this period. [ABSTRACT FROM AUTHOR]

Background: A series of complications caused by enteroviruses, including meningitis, encephalitis, acute flaccid paralysis, acute cardiopulmonary failure, respiratory infection, and myocardial injury have been reported in hand, foot and mouth disease/herpangina (HFMD/HA). However, the complication of diarrhoea caused by enteroviruses has been neglected, and a summary of its clinical features and impact on HFMD/HA is unavailable.Methods: We included inpatients with HFMD/HA admitted to the Paediatric Department of Zhujiang Hospital during 2009-2012. We summarised and compared clinical data for cases with and without diarrhoea, and determined enterovirus serotypes by reverse transcriptase polymerase chain reaction and genotyping based on a partial-length fragment of viral protein 1 or the 5'-untranslated region.Results: There were 804 inpatients with HFMD/HA and 28 (3.5%) presented with diarrhoea. Gastrointestinal symptoms were mild in most cases of diarrhoea (82.1%), with high prevalence of no dehydration (82.1%), short duration of diarrhoea (78.6%) and watery stools (75.0%). The prevalence of multi-organ dysfunction syndrome (10.7 vs 0.40%) (p = 0.001), hepatic injury (14.3 vs 3.4%) (p = 0.019), myocardial injury (21.4 vs 6.1%) (p = 0.002) and convulsion (21.4 vs 7.2%) (p = 0.016) was significantly higher in the diarrhoea than no diarrhoea group. There was no significant difference between the two groups regarding prevalence of death, altered consciousness, paralysis, central nervous system involvement, or acute respiratory infection.Conclusions: Most patients with diarrhoea caused by enteroviruses circulating in Guangdong Province in 2009-2012 had mild or moderate gastrointestinal symptoms. Although enterovirus-related diarrhoea caused additional multi-organ dysfunction syndrome, hepatic injury and myocardial injury in children with HFMD/HA, timely intervention efficiently reduced disease severity and improved outcome. [ABSTRACT FROM AUTHOR]

Research Background: Chilling injury is a major disorder affecting the quality of tropical and subtropical vegetables during low temperature storage. Snap bean ( Phaseolus vulgaris L.) is sensitive to chilling injury. The main purpose of the present study is to investigate the alleviating effects of 1-methylcyclopropene (1-MCP) on chilling injury of snap bean. In addition, the related mechanisms were also detected from the perspective of the changes of antioxidant defense system., Experimental Approach: Snap beans were exposed to different volume fractions of 1-MCP. After 24 h of treatment, snap beans were stored at 4 °C for up to 14 days. Chilling injury index, electrolyte leakage, titratable acidity and total soluble solids were determined. Contents of chlorophyll, ascorbic acid and malondialdehyde were assessed. The total antioxidant capacity, Fe(II) ion chelating capacity, scavenging capacities on free radicals and activities of antioxidant enzymes were detected. Total phenol content and activities of related metabolic enzymes were also determined., Results and Conclusions: 1-MCP treatment reduced chilling injury index, electrolyte leakage rate and malondialdehyde content of snap beans. The amounts of total soluble solids, titratable acid, ascorbic acid and total chlorophyll in 1-MCP-treated snap beans were significantly higher than those of control. The snap beans treated with 1-MCP showed stronger total antioxidant capacity and metal chelating activity. The 1-MCP treatment enhanced scavenging effects of snap beans on superoxide, hydroxyl and 1,1-diphenyl-2-trinitrophenylhydrazine radicals. The activities of peroxidase, ascorbate peroxidase, superoxide dismutase and catalase in 1-MCP-treated group were higher than of control. The treatment also enhanced the accumulation of phenolic compounds in snap beans by regulating the activities of phenol-metabolizing enzymes such as shikimate dehydrogenase, phenylalanine ammonia lyase enzyme, cinnamic acid 4-hydroxylase and polyphenol oxidase. In conclusion, with the mechanism that involves the activation of enzymatic and non-enzymatic antioxidant systems, 1-MCP has the ability to avoid chilling injury of snap bean., Novelty and Scientific Contribution: This study gives insights into whether 1-MCP can regulate postharvest cold resistance in vegetables by enhancing the enzymatic antioxidant system and inducing the accumulation of non-enzymatic antioxidants. Considering the results, 1-MCP treatment could be an effective method to alleviate postharvest chilling injury of snap beans during low temperature storage., Competing Interests: CONFLICT OF INTEREST The authors declare no conflict of interest., (Authors.)