Search

Most stretchable film strain sensors generally present nonlinear electrical responses to applied strain, leading to an inaccurate acquisition of sophisticated signals, difficult signal processing, and zero‐calibration, which hampers practical applications severely. Here, a Janus hetero‐structured microarray film sensor is developed by in‐situ growth of silver nanoparticles on the surface of micro‐patterned elastomer films fabricated via low‐temperature imprinting followed by scraping‐induced particle trapping. Heterogeneous property designs in both modulus and electrical conductivity via introducing polymer microarrays enable modulating the electron transport manner in the conductive layer of elastic Janus films upon stretching, allowing to tune signal linearity effectively. Therefore, such a hetero‐structured film sensor shows good signal linearity (fluctuation of gauge factor [GF] below ±0.02) and relatively high sensitivity (GF > 10) within 55% strain, a detection limit of 0.2% strain, and a response/recovery time of 16.3/46.9 ms, respectively. Correspondingly, it enables monitoring human respiration and body motion with higher resolution compared with the nonlinear one, meanwhile, it is capable of detecting tiny pressure to discriminate braille alphabets via touch identification. Overall, it unveils a simple strategy to fabricate film strain sensors for high‐resolution healthcare and body motion monitoring, as well as electronic skins toward tactile sensing and touch identification. [ABSTRACT FROM AUTHOR]

Water treatment faces significant challenges due to the increasing complexity of pollutants and the need for more efficient, sustainable treatment methods. However, current adsorbent materials often struggle with issues such as low adsorption capacity, slow kinetics, and poor reusability, limiting their practical application. In this study, we developed a novel hierarchical porous hybrid gel (HPHG) for water treatment to address the limitations of conventional adsorbents. The HPHG features a multi-level porous structure (from 48 ± 28 nm to 4385 ± 823 nm) that significantly enhances its porosity and specific surface area. We systematically investigated the relationship between the material's structure and its adsorption performance. Kinetic studies revealed a tendency towards a pseudo-second-order adsorption model, attributed to the material's unique structural features that facilitate rapid mass exchange channels inside HPHG and provide abundant active sites for pollutant adsorption. Reusability tests demonstrated that the material retained 85.4% of its initial adsorption capacity after five adsorption-desorption cycles, highlighting its potential for practical applications. This study provides valuable insights into structure-performance relationships in advanced water treatment materials, offering a promising approach for designing next-generation adsorbents with superior efficiency and sustainability., Competing Interests: The authors declare that they have no competing interests., (This journal is © The Royal Society of Chemistry.)

An increasing utilization of flexible healthcare electronics and biomedicine-related therapeutic materials urges the development of multifunctional wearable/flexible smart fabrics for personal therapy and health management. However, it is currently a challenge to fabricate multifunctional and on-body healthcare electronic devices with reliable mechanical flexibility, excellent breathability, and self-controllable joule heating effects. Here, we fabricate a multifunctional MXene-based smart fabric by depositing 2D Ti 3 C 2 T x nanosheets onto cellulose fiber nonwoven fabric via special MXene-cellulose fiber interactions. Such multifunctional fabrics exhibit sensitive and reversible humidity response upon H 2 O-induced swelling/contraction of channels between the MXene interlayers, enabling wearable respiration monitoring application. Besides, it can also serve as a low-voltage thermotherapy platform due to its fast and stable electro-thermal response. Interestingly, water molecular extraction induces electrical response upon heating, i.e. , functioning as a temperature alarm, which allows for real-time temperature monitoring for thermotherapy platform without low-temperature burn risk. Furthermore, metal-like conductivity of MXene renders the fabric an excellent Joule heating effect, which can moderately kill bacteria surrounding the wound in bacteria-infected wound healing therapy. This work introduces a multifunctional smart flexible fabric suitable for next-generation wearable electronic devices for mobile healthcare and personal medical therapy.