Search

A new conjugated-block copolymer PBDB-YTCl-2 was synthesized. The photovoltaic performance, morphological characteristics and physical mechanisms of PBDB-YTCl-2 were compared with those of the bulk-heterojunction PBDB-T:PYCl-2 system.

Summary The field of all-polymer solar cells (all-PSCs) has experienced rapid development during the past few years, mainly driven by the design of efficient polymer acceptors (PAs). However, the polymer/polymer blend systems still lag far behind polymer/small molecule acceptor counterparts in power conversion efficiencies (PCEs). Here, we designed a near-infrared PA PY2F-T and paired it with polymer donor PM6 to fabricate all-PSCs with 15.0% PCE. Afterwards, PYT as the third component was introduced into the PM6:PY2F-T host system. Because of the complementary absorption bands and finely tuned microstructures of the ternary blend, the PCE is improved up to 17.2%, with the external quantum efficiency over 80% in visible and near-infrared spectral regions. Impressively, the ternary blend exhibited less energy loss, better light-soaking and photo-thermal stabilities than did the corresponding binary systems. This work promotes the development of high-performance ternary all-polymer systems and heralds a brighter future for accelerating the possible applications of all-PSCs.

High-resolution passive-matrix polymer light-emitting displays with printed cathodes are achieved by combining delicate cathode deposition and multifunctional buffer layer fabrication. Unlike other printing methods and printed materials, ink-jetting conducting nano-particles as cathode can provide high-resolution cathode patterns and excellent continuity along the fine cathode lines without any mechanical pressure on the organic layers. The buffer layer between the printed cathode and the organic active layers, was fabricated by mixing the water/alcohol-soluble polymer poly[9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene-alt-2,7-(9,9-dioctylfluorene)] (PFNR2) and a curable epoxy adhesive. It offers the functions of solvent-proof, electron-injection, and proper affinity with the cathode ink. While improving the performance of devices, especially blocking the leakage current greatly, the cross-linked buffer layer also induces a novel phenomenon of ‘linear η-J plot’, which can be derived to interesting and realistic results. Red, green, and blue monochrome and full-color polymer light-emitting displays with a content format of 96 × 3 × 64 show neither dead pixels nor dead lines. Under optimized steps of curing, the nano silver ink forms continuous, defect-free, and low-resistance cathode rows without any distortion. The red, green, and blue displays exhibit the current efficiencies of 0.62, 4.38 and 0.93 cd/A, and CIE color coordinates of (0.63, 0.37), (0.39, 0.57) and (0.18, 0.16), respectively. The cathode printing technique removes the need of high vacuum for thermal evaporation of the cathode metal, which could lead to the industrial roll-to-roll process to manufacture the flat panel displays.