Search

With the coverage of sensor-rich smart devices (smartphones, iPads, etc.), combined with the need to collect large amounts of data, mobile crowd sensing (MCS) has gradually attracted the attention of academics in recent years. MCS is a new and promising model for mass perception and computational data collection. The main function is to recruit a large group of participants with mobile devices to perform sensing tasks in a given area. Task assignment is an important research topic in MCS systems, which aims to efficiently assign sensing tasks to recruited workers. Previous studies have focused on greedy or heuristic approaches, whereas the MCS task allocation problem is usually an NP-hard optimisation problem due to various resource and quality constraints, and traditional greedy or heuristic approaches usually suffer from performance loss to some extent. In addition, the platform-centric task allocation model usually considers the interests of the platform and ignores the feelings of other participants, to the detriment of the platform’s development. Therefore, in this paper, deep reinforcement learning methods are used to find more efficient task assignment solutions, and a weighted approach is adopted to optimise multiple objectives. Specifically, we use a double deep Q network (D3QN) based on the dueling architecture to solve the task allocation problem. Since the maximum travel distance of the workers, the reward value, and the random arrival and time sensitivity of the sensing tasks are considered, this is a dynamic task allocation problem under multiple constraints. For dynamic problems, traditional heuristics (eg, pso, genetics) are often difficult to solve from a modeling and practical perspective. Reinforcement learning can obtain sub-optimal or optimal solutions in a limited time by means of sequential decision-making. Finally, we compare the proposed D3QN-based solution with the standard baseline solution, and experiments show that it outperforms the baseline solution in terms of platform profit, task completion rate, etc., the utility and attractiveness of the platform are enhanced.

Efficient enantioselective separation using porous materials requires tailored and diverse pore environments to interact with chiral substrates; yet, current cage materials usually feature uniform pores. Herein, we report two porous assemblies

This paper studied the trajectory tracking control of a failure satellite that has actuator jumping fault. It proposed a design method based on the jumping control input for the model reference tracking controller. By comb-ining the stochastic stability definition with model reference tracking, it gave the mathematical descriptions of the trajectory tracking control of the failure satellite. It used the linear matrix inequality method and the parametric solution method of the nonhomogeneous generalized Sylvester matrix equation to design the robust H∞ state feedback control law and the complete parametric feed-forward tracking compensator respectively, with the disturbance of the failure satellite and its thrust constraint considered simultaneously. The numerical simulation results on the model of the satellite rendezvous system show that the design method proposed in this paper is effective.

A chiral metal-organic framework (CMOF) with open chiral channels and multiple recognition sites is constructed from camphoric acid and a dipyridyl ligand. It can act as an efficient chiral solid adsorbent, capable of separating a variety of racemic alcohols and epoxides with excellent enantioselectivities.

A biomimetic metal–organic framework with cuboid inner cavities and multiple recognition sites was constructed from a phenylalanine-derived ligand. It can enantioselectively separate various racemic alcohols, diols and epoxides with ee up to 99.5%.

A novel hybrid structure of bimetallic dicyanamide decorated BiVO4 is developed via a simple method to accelerate interfacial water oxidation kinetics. Two types of bimetallic dicyanamides, CoNi(dca)2 and CoFe(dca)2, are coated on BiVO4 photoanodes and are found to exhibit far more enhanced PEC performance than Co(dca)2 or Ni(dca)2 as cocatalysts. The successful deposition of metal dicyanamides on BiVO4 photoanodes is confirmed by physical characterizations including X-ray photoelectron spectroscopy (XPS). The optimized Co0.9Ni0.1(dca)2/BiVO4 photoanode exhibits the highest photocurrent density of 2.58 mA/cm2 at 1.23 V vs. RHE under 100 mW/cm2 AM 1.5 G irradiation, which is 2.5 times that of bare BiVO4. The substantial enhancement of PEC performance can be ascribed to the advantageous interfacial charge transfer and improved charge injection efficiencies. This work presents a feasible strategy using different types of bimetallic dicyanamides to design a modified BiVO4-based photoanode system for enhanced water oxidation efficiency.

The birth of the Internet has brought great changes to people's production and life. China's Internet development has gone through more than 10 years, during which it experienced the initial stage of ignorance and rapid development. The subsequent economic bubble brought the Internet economy to a low level. After the baptism of the Internet economic bubble, the China Internet reopened its vitality and gradually moved toward the right track. Tencent and Chinese Internet companies have experienced the ups and downs of the Internet economy and become the leader of Chinese Internet enterprises after more than ten years of development. What on earth did Tencent achieve so much? What is the difference between its competitive strategy and other Internet companies? These are the problems that this paper attempts to study in depth.

To solve surface carrier recombination and sluggish water oxidation kinetics of hematite (α-Fe

Atom search optimization algorithm has good searching ability and has been successfully applied to calculate hydrogeological parameters and groundwater dispersion coefficient. Since the atom search optimization algorithm is only based on the atom force motion model in molecular dynamics, it has some shortcomings such as slow search speed and low precision during the later stage of iteration. A modified atom search optimization based on the immunologic mechanism and reinforcement learning is proposed to overcome the abovementioned shortcomings in this paper. The proposed algorithm introduces a vaccine operator to better utilize the dominant position in the current atom population so that the speed, accuracy, and domain search ability of the atom search optimization algorithm can be strengthened. The reinforcement learning operator is applied to dynamically adjust the vaccination probability to balance the global exploration ability and local exploitation ability. The test results of 21 benchmark functions confirm that the performance of the proposed algorithm is superior to seven contrast algorithms in search accuracy, convergence speed, and robustness. The proposed algorithm is used to optimize the permutation flow shop scheduling problem. The experimental results indicate that the proposed algorithm can achieve better optimization results than the seven comparative algorithms, so the proposed algorithm has good practical application value.

Metal-nitrides-based electrocatalysts for efficient oxygen-evolution have been extensively studied as one of the most promising candidates to fulfil the demand for future energy-conversion and storage. Herein, a series of NixCo1−xO- and NixCo1−xN-based nanostructures on nickel foams were reported to show excellent activities for oxygen-evolution reaction. The catalysts were prepared and modulated rationally via a facile-hydrothermal method, followed by high-temperature calcination under air or nitrogen atmosphere. The optimal bimetallic-nitride catalyst Ni0.3Co0.7N shows a small overpotential of 268 mV at 20 mA cm−2, and a Tafel slope of 66 mV dec−1 with good stability. The enhanced OER-performance is ascribed to the synergetic effect of the unique morphology and the intrinsic catalytic property of the nanostructure after nitridation.

This paper presents a study on wave propagation in rotating functionally graded (FG) microbeams reinforced by graphene nanoplatelets (GPLs). The graphene nanoplatelets (GPLs) are considered to distribute in the diameter direction of the micro-beam in a gradient pattern, which leads to the functionally graded structure. By using the Halpin-Tsai micromechanics model and the rule of mixture, the effective material properties of the microbeam are determined. According to the Euler-Bernoulli beam theory and nonlocal elasticity theory, the rotating microbeams are modeled. A comprehensive parametric study is conducted to examine the effects of rotating speed, GPL distribution pattern, GPL length-to-thickness ratio, GPL length-to-width ratio, and nonlocal scale on the wavenumber, phase speed and group speed of the microbeam. The research findings can play an important role on the design of rotating graphene nanoplatelet (GPL) reinforced microbeams for better structural performance.

Plates are commonly used in many engineering disciplines, including aerospace. With the continuous improvement in the capacity of high value-added airplanes, large transport aircrafts, and fighter planes that have high strength, high toughness, and corrosion resistance have gradually become the development direction of airplane plate structure production and research. The strength and stability of metal plate structures can be improved by adding reinforced materials. This paper studies graphene platelets (GPLs) reinforced with a free vibration porous composite plate. The porous plate is constructed with a multi-layer model in a metal matrix containing uniform or non-uniformly distributed open-cell internal pores. Considering the random and directional arrangement of graphene platelets in the matrix, the elastic modulus of graphene composites was estimated using the Halpin–Tsai micromechanical model, and the vibration frequencies of graphene composite were calculated using the differential quadrature method. The effects of the total number of layers, GPL distribution pattern, porosity coefficient, GPL weight fraction, and boundary conditions on the free vibration frequency of GPLs reinforced porous composite plates are studied, and the accuracy of the conclusions are verified by the finite element software.

Surface treatment is an effective method to improve the photoelectrochemical (PEC) performance of photoelectrodes. Herein, we introduced a novel strategy of surface sulfurization to modify hematite (α-Fe2O3) nanorods grown in an aqueous solution, which triggered encouraging improvement in PEC performances. In comparison to the solution-grown pristine α-Fe2O3 nanorod photoanode that is PEC inefficient and always needs high temperature (>600 °C) activation, the surface sulfurized α-Fe2O3 nanorods show photocurrent density increased by orders of magnitude, reaching 0.46 mA cm−2 at 1.23 V vs. RHE (reversible hydrogen electrode) under simulated solar illumination. This improvement in PEC performances should be attributed to the synergy of the increased carrier density, the reduced surface charge carrier recombination and the accelerated water oxidation kinetics at the α-Fe2O3/electrolyte interface, as induced by the incorporation of S ions and the formation of multi-state S species (Fe-Sx-Oy) at the surface of α-Fe2O3 nanorods. This study paves a new and facile approach to activate α-Fe2O3 and even other metal oxides as photoelectrodes for improved PEC water splitting performances, by engineering the surface structure to relieve the bottlenecks of charge transfer dynamics and redox reaction kinetics at the electrode/electrolyte interface.

A chiral structure with a negative Poisson’s ratio containing a hollow circle with varying diameters was designed, and the finite element method was used to investigate the variation in the Poisson’s ratio when the hollow circle diameter was varied (d = 0, 1, 2, 3, and 4 mm). The simulation results showed that the Poisson’s ratio was sensitive to the hollow circle diameter, and the minimum Poisson’s ratio was −0.43. Three specimens with different hollow circle diameters (d′ = 0, 1, and 3 mm) were 3D-printed from thermoplastic polyurethane, and the Poisson’s ratio and equivalent elastic modulus were measured. In the elastic range, the Poisson’s ratio increased and the equivalent elastic modulus decreased as the hollow circle diameter increased. The simulation and experimental results showed good agreement. The proposed structure is expected to be applicable to protective sports gear owing to its high energy absorption and the fact that its properties can be modified as required by adjusting the geometric parameters of the unit cell.

The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China (nos. 51961165103 and 51672210) and the National Key Research and Development Program of China (2018YFB1502003 and 2017YFE0193900). S.S. is supported by the National Program for Support of Top-notch Young Professionals and “The Youth Innovation Team of Shaanxi Universities.”

Bismuth vanadate (BiVO4) is one of the most promising metal oxide semiconductors for photoelectrochemical (PEC) water oxidation. Much efforts have been dedicated on accelerating the sluggish surface water oxidation kinetics. In this study, plasma enhanced atomic layer deposition and subsequent removal of Al2O3 ultrathin overlayers on bismuth vanadate were implemented to achieve the successful passivation of surface states and significant enhancement of PEC performance. Al2O3 ultrathin overlayers were first coated on BiVO4 surface via plasma enhanced atomic layer deposition with various deposition cycles, which resulted in the decrease of PEC water oxidation activity due to the poor conductivity. The subsequent removal of surface amorphous Al2O3 passivated the surface states of the photoanodes and significantly enhanced the photocurrent densities. The passivated BiVO4 exhibited a photocurrent density of 1.34 mA·cm−2 at 1.23 V vs. RHE, which is 73% higher than that of unmodified BiVO4. This work provides a novel strategy and deep insights on surface modification of semiconductor for photoelectrochemical energy conversion.

In this study, we report a simple, effective and universal approach to fabricate homojunction structural TiO2 nanorod array photoelectrodes through doping of gradient distributed oxygen vacancies introduced by annealing in high vacuum with controlled time. The homogeneous junction structure promotes the separation and transport of photoexcited charge carriers, and the photocurrent density of TiO2 nanorod arrays annealed in high vacuum for 2 h was 20 times higher than that of the pristine TiO2 nanorod arrays. The results indicate that annealing in high vacuum with controlled time could form a homojunction structure, which is an effective approach for further enhancing the performance of UV–visible light driven photocatalytic materials for water splitting.

Given the proper band gap, low cost and good stability, hematite (α-Fe2O3) has been considered as a promising candidate for photoelectrochemical (PEC) water splitting, however suffers from the sluggish surface water oxidation reaction kinetics. In this study, a simple dip-coating process was used to modify the surface of α-Fe2O3 nanorod arrays with cobalt oxide (CoOx) and carbon (C) for the improved PEC performance, with a photocurrent density at 1.6 V (vs. reversible hydrogen electrode, RHE) increased from 0.10 mA/cm2 for the pristine α-Fe2O3 to 0.37 mA/cm2 for the CoOx/C modified α-Fe2O3 nanorods. As revealed by electrochemical analysis, thanks to the synergistic effect of CoOx and C, the PEC enhancement could be attributed to the enhanced charge transfer ability, decreased surface charge recombination, and accelerated water oxidation reaction kinetics. This study serves as a good example for improving PEC water splitting performance via a simple method.

Most mechanism contains one or more joints. However, joint clearances which cannot be dislodged make accuracy analysis become complicated. In order to seek a method to investigate the impact of joint clearances on the accuracy of a parallel robot, this paper deals with the 3-SPS-1-S spatial parallel robot’s pose error predicting and sensitivity analyzing. In this paper, a nonlinear method for evaluating the sources of the pose errors is proposed on the condition that the pose errors only come from joint clearances. Firstly, based on the nonlinear contact modes inside the joints, the error equivalent method is outlined for spherical joint and sliding pair. Then the pose error distribution over its workspace is presented. Secondly, those areas where the pose errors present abnormally changing are analyzed. Thirdly, sensitivity models are defined to evaluate how much the external variable load affects the pose errors. Finally, the simulation results, which are consistent with the structural characteristics of the 3-SPS-1-S spatial parallel robot, proved the validity of the equivalent method proposed in this paper.

The risk of knee injuries in freestyle skiing athletes that perform aerials is high. The internal stresses in the knee joints of these athletes cannot easily be directly measured. In order to ascertain the mechanical response of knee joints during the landing phase, and to explore the mechanism of damage to the cartilage and ligaments, a finite element model of the knee joint was established. Three successful landing conditions (neutral, backward, or forward landing) from a triple kicker were analyzed. The results demonstrate that the risk of cruciate ligament damage during a neutral landing was lowest. A forward landing carried medium risk, while backward landing was of highest risk. Backward and forward landing carried risk of injury to the anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL), respectively. The magnitude of stress on the meniscus and cartilage varied for all three landing scenarios. Stress was largest during neutral landing and least in backward landing, while forward landing resulted in a medium level of stress. The results also provide the basis for training that is scientifically robust so as to reduce the risk of injury and assist in the development of a professional knee joint protector.

In this study, Nb-doped α-Fe2O3 nanorod photoanodes were prepared via a facile solution-based process by directly adding NbCl5 in the aqueous solution. The morphology and electronic structure of Nb-doped α-Fe2O3 films depended strongly on the dopant concentrations. Compared with the undoped sample, the optimal Nb-doped α-Fe2O3 film showed an approximately 4-fold photocurrent increase under solar light at 1.0 V versus Ag/AgCl, and the incident photon-to-current conversion efficiency was increased by 2.5 times, reaching 13.7 % at 350 nm and 1.23 V versus RHE. The enhancement in PEC activity, as induced by moderate Nb doping, was attributed to the increased charge carrier density for promoted charge transfer ability as well as the smaller nanorod diameter for shortened charge transfer distance. However, superfluous Nb dopants would destroy the nanorod structure and greatly reduce the thickness of α-Fe2O3 films, leading to poor optical absorption and thus decreased photoelectrochemical performance.

Porous photoelectrodes show high efficiency in hydrogen production by water splitting. However, fabrication of porous nanorods is usually difficult. Here, we report a simple approach to fabricate a kind of novel porous rutile titanium dioxide nanorod array by an advanced ion implantation method using multiple-energy helium ion implantation and subsequent annealing. The porous nanostructure enhances the photoelectrochemical performance of the titanium dioxide nanorod array photoelectrodes under Uv-visible light illumination, where the highest photocurrent density was relatively about 10 times higher than that of the pristine titanium dioxide nanorod array. The formation of nanocavities mainly contributes to the enhancement of the photocurrent density by trapping holes inside to separate the charge carriers. The study demonstrates that ion implantation could be an effective approach to develop novel porous nanostructural photoelectrodes for the application of hydrogen production.

Engineering the interface and surface structures of semiconductor-based photoelectrodes for improved charge transfer dynamics and promoted water redox reaction kinetics is essential to achieve efficient photoelectrochemical (PEC) water splitting. In this work, α-Fe2O3 nanorods, successively coated with TiO2 and CoOx thin layers, were reported as the photoanode for solar-driven water oxidation. The obtained α-Fe2O3/TiO2/CoOx photoanode exhibits superior PEC performance as compared to bare α-Fe2O3, with a 3.3-time improvement in photocurrent density at 1.23 V vs reversible hydrogen electrode. This significant enhancement results from the formed heterojunction between α-Fe2O3 and TiO2 for the accelerated photogenerated charge separation and transfer as well as the passivated surface defects by the TiO2 overlayer for reduced charge recombination. Additionally, the existence of CoOx as the oxygen evolution catalyst significantly facilitates the surface reaction kinetics and thus reduces the overpotential for water oxidation. This study demonstrates a collaborative strategy of interface and surface engineering to design novel structures of α-Fe2O3 based photoanodes for highly efficient solar water oxidation.

Novel hybrid tetra-nitro-phthalocyanine Copper(II) (TNCuPc)/TiO2 films were successfully synthesized using a simple hydrothermal and solvothermal method. The successful deposition of TNCuPc on the TiO2 nanorods was confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The precursor concentration for hydrothermal deposition of TiO2 was optimized for light absorption and photoelectrochemical (PEC) water splitting. The hierarchical nanostructure exhibited increased light absorption ability and enhanced PEC properties. Moreover, the concentration of the precursor solution for TNCuPc deposition was also optimized for the performance of the TNCuPc/TiO2 hybrid nanostructure. The optimal sample achieved the highest photocurrent of 1.1 mA cm−2 and the highest IPCE of 51% at 610 nm.

In this study, a ternary nanostructured α-Fe2O3/Au/TiO2 film with integrating a crystalline α-Fe2O3 core, metallic Au nanoparticles (NPs), and an amorphous TiO2 overlayer is fabricated and examined as a photoanode for photoelectrocatalytic water splitting. Under simulated solar illumination, the as-prepared photoanode exhibits a four-fold increase (1.05 mA cm−2) in photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) relative to bare α-Fe2O3. Based on systematic investigations, it is proposed that Au NPs extract photoholes from the bulk of α-Fe2O3 core and then shuttle them to the outer TiO2 overlayer, and meanwhile, TiO2 overlayer efficiently captures and stores the photoholes and facilitates the hole injection into electrolyte. Thus, the remarkably improved photoelectrocatalytic water splitting performance of α-Fe2O3/Au/TiO2 photoanode is attributed to the significantly suppressed bulk and surface charge recombination due to the relayed pumping of the photogenerated charge carriers through the photoanode/electrolyte interfaces reconstructed by Au NPs and TiO2 overlayer.

A flower pollination algorithm is proposed based on the hormone modulation mechanism (HMM-FPA) to solve the no-wait flow shop scheduling problem (NWFSP). This algorithm minimizes the maximum accomplished time. Random keys are encoded based on an ascending sequence of components to make the flower pollination algorithm (FPA) suitable for the no-wait flow shop scheduling problem. The hormone modulation factor is introduced to strengthen information sharing among the flowers and improve FPA cross-pollination to enhance the algorithm global search performance. A variable neighborhood search strategy based on dynamic self-adaptive variable work piece blocks is constructed to improve the local search quality. Three common benchmark instances are applied to test the proposed algorithm. The result verifies that this algorithm is effective.

The photoelectrochemical (PEC) water splitting activity of Nb and Ta-doped hematite (α-Fe