Search

Many deep learning methods typically assume that the marginal probability distribution between the training and testing bearing data is similar or the same. However, the probability distribution of rolling bearings may deviate significantly under diverse working conditions. To address the above limitations, a novel transferable remaining useful life (RUL) prediction method integrated with Bayesian deep learning and unsupervised domain adaptation (DA) is proposed. First, the signal alignment is executed on the data after the first prediction time to maintain the same granularity and scale across both source and target domains. Second, the multi‐domain features are extracted and sent into the dual‐channel Transformer network (DCTN) incorporating the convolutional block attention module (CBAM) to adequately exploit the abundant degradation information. Then, the DA module is incorporated into the model to mitigate the distribution discrepancies of the extracted high‐level merged features between the source and target domains. Finally, by applying the variational inference method, the DCTN‐CBAM is extended to the Bayesian deep neural network, and the RUL prediction and its corresponding confidence intervals can be conveniently derived. In addition, the generalization capability and effectiveness are validated through six bidirectional transfer RUL prediction tasks across two rolling bearing datasets. The experimental results demonstrate that it could provide a more reliable RUL prediction and efficiently account for the prediction uncertainty. [ABSTRACT FROM AUTHOR]

Excessive land application of poultry litter (PL) may lead to surface runoff of nitrogen (N) and phosphorus (P), which cause eutrophication, fish death, and water pollution that ultimately have negative effects on humans and animals. Increases in poultry production in the Delmarva Peninsula underscore the need for more efficient, cost-effective, and sustainable disposal technologies for processing PL instead of direct land application. The pyrolysis conversion process can potentially produce nutrient-rich poultry litter biochar (PLB), while the pyrolysis process can change the N and P to a more stable component, thus reducing its runoff. Pyrolysis also kills off any microorganisms that would otherwise trigger negative environmental health effects. This study is to apply an integrated method and investigate the effect of pyrolysis temperature (300 °C, 500 °C), poultry litter source (different feedstock composition), and bedding material mixture (10% pine shavings) on PLB qualities and quantities. Proximate and ultimate analysis showed PL sources and bedding material addition influenced the physicochemical properties of feedstock. The SEM and BET surface results indicate that pyrolysis temperature had a significant effect on changing the PLB morphology and structure, as well as the pH value (7.78 at 300 °C vs. 8.78 at 500 °C), extractable phosphorus (P) (18.73 ppm at 300 °C vs. 11.72 ppm at 500 °C), sulfur (S) (363 ppm at 300 °C vs. 344 ppm at 500 °C), and production yield of PLBs (47.65% at 300 °C vs. 60.62% at 500 °C). The results further suggest that adding a bedding material mixture (10% pine shavings) to PLs improved qualities by reducing the content of extractable P and S, as well as pH values of PLBs. This study also found the increment in both the pore volume and the area of Bethel Farm was higher than that of Sun Farm. Characterization and investigation of qualities and quantities of PLB using the integrated framework suggest that PL from Bethel Farm could produce better-quality PLB at a higher pyrolysis temperature and bedding material mixture to control N and P runoff problems. [ABSTRACT FROM AUTHOR]

Featured Application: Results and findings from this study can be used to further develop the sustainable and environmentally friendly small-scale biomass combustion system. Electricity generation and emission characteristics during the poultry litter and natural gas co-combustion process has rarely been studied. In this study, a Stirling engine was successfully integrated into the existing lab-scale swirling fluidized bed combustion system in order to further investigate the poultry litter and natural gas co-combustion process. Electricity, gaseous emissions, particulate matter (PM), and fly ash composition were analyzed under various operating conditions. Results indicated that the electricity reached 905 W under a water flow rate of 13.1 L/min and an engine head temperature of 584 °C. It was found that excess air (EA) ratios between 0.79 and 1.08 can relatively produce more electricity with lower emissions. At a secondary air (SA) height of 850 mm, secondary air/total air (SA/TA) ratios between 0.22 and 0.44 may significantly reduce NOx and CO emissions. By increasing the mixing ratio (MR), SO2 was reduced while NOx increased at the beginning of co-combustion process but then decreased again. Additionally, PM results were lower than Maryland emissions standards. The fly ash results showed a higher nutrient content (close to 16%). This study shows the possibility of using poultry litter as a sustainable energy source for energy production while emitting lower emissions in the small decentralized combustion system. [ABSTRACT FROM AUTHOR]