Search

To improve the bio-performances of polyetheretherketone (PEEK) for orthopedic applications, submicro-particles of niobium pentoxide (Nb2O5) were synthesized using a sol-gel method, and PEEK/Nb2O5 composites (PNC) with a Nb2O5 content of 25v% (PNC25) and 50v% (PNC50) were fabricated by utilizing a process of pressing-sintering. The results showed that the Nb2O5 particles were not only dispersed in the composites but also exposed on the surface of the composites, which formed submicro-structural surfaces. In addition, the hydrophilicity, surface energy, surface roughness and absorption of proteins of the composites were improved with increasing Nb2O5 content. Moreover, the release of Nb ions with the highest concentration of 5.01 × 10-6 mol L-1 from the composite into the medium displayed no adverse effects on cell proliferation and morphology, indicating no cytotoxicity. Furthermore, compared with PEEK, the composites, especially PNC50, obviously stimulated adhesion and proliferation as well as osteogenic differentiation of bone mesenchymal stem cells of rats. The results suggested that the incorporation of Nb2O5 submicro-particles into PEEK produced novel bioactive composites with improved surface properties, which played important roles in regulating cell behaviors. In conclusion, the composites, especially PNC50 with good cytocompatibility and promotion of cellular responses, exhibited great potential as implantable materials for bone repair.

Poly(propylene carbonate) (PPC) has aroused extensive attention in the biomaterial field because of its excellent biocompatibility and appropriate degradability, but surface hydrophobicity and bioinertness limit its applications for bone repair and tissue engineering. In this study, a bioactive PPC/laponite (LAP) nanocomposite (PL) was prepared by a melt-blending method, and a microporous surface on PPC and PL (PT and PLT) was created by sodium hydroxide (NaOH) treatment. The results demonstrated that the surface roughness, hydrophilicity, surface energy, and degradability as well as protein adsorption of PLT were obviously improved compared with PPC. Moreover, the degradability of PLT was remarkably enhanced with a slight increase of pH values in Tris-HCl solution. Furthermore, adhesion and proliferation as well as osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs) to PLT were significantly promoted compared with PPC. The results suggested that incorporating LAP into PPC obviously improved the surface performance of PL (with nanotopography), and surface treatment with NaOH further enhanced surface properties of PLT (with micronanotopography and hydrophilic groups), which significantly promoted responses of rBMSCs. In short, PLT displayed excellent cytocompatibility, which would have great potential for bone regeneration.

Dental implanted materials require excellent mechanical properties, biocompatibility as well as integration with bone tissue and gingival tissue to achieve early loading and long-term stability. In this study, cubic shape sodium tantalite (ST) submicro-particles with the size of around 180 nm were synthesized by a hydrothermal method, and ST/polyetheretherketone (PEEK) composites (TPC) with ST content of 20 w% (TPC20) and 40 w% (TPC40) were prepared by melting blend. The results showed that the compressive strength, thermal properties, surface roughness, hydrophilicity and surface energy as well as adsorption of proteins on TPC40 were also significantly enhanced compared with TPC20 and PEEK. Moreover, the responses (adhesion and proliferation as well as differentiation) of rat bone marrow mesenchymal stem cells (rBMSCs), and responses (adhesion, and proliferation) of human gingival epithelial (HGE-1) cells to TPC40 were significantly promoted compared with TPC20 and PEEK. The results demonstrated that ST content in TPC had remarkable effects on the surface properties, which played key roles in stimulating the responses of both rBMSCs and HGE-1 cells. TPC40 with increased surface properties and excellent cytocompatibility might have great potential as an implanted material for dental application.

BACKGROUND Over 30 million people in the United States (over 9%) have been diagnosed with diabetes. About 25% of people with diabetes will experience a diabetic foot ulcer (DFU) in their lifetime. Unresolved DFUs may lead to sepsis and are the leading cause of lower-limb amputations. DFU rates can be reduced by screening patients with diabetes to enable risk-based interventions. Skin temperature assessment has been shown to reduce the risk of foot ulceration. While several tools have been developed to measure plantar temperatures, they only measure temperature once a day or are designed for clinic use only. In this report, wireless sensor-embedded socks designed for daily wear are introduced, which perform continuous temperature monitoring of the feet of persons with diabetes in the home environment. Combined with a mobile app, this wearable device informs the wearer about temperature increases in one foot relative to the other, to facilitate early detection of ulcers and timely intervention. OBJECTIVE A pilot study was conducted to assess the accuracy of sensors used in daily wear socks, obtain user feedback on how comfortable sensor-embedded socks were for home use, and examine whether observed temperatures correlated with clinical observations. METHODS Temperature accuracy of sensors was assessed both prior to incorporation in the socks, as well as in the completed design. The measured temperatures were compared to the reference standard, a high-precision thermostatic water bath in the range 20°C-40°C. A total of 35 patients, 18 years of age and older, with diabetic peripheral neuropathy were enrolled in a single-site study conducted under an Institutional Review Board–approved protocol. This study evaluated the usability of the sensor-embedded socks and correlated the observed temperatures with clinical findings. RESULTS The temperatures measured by the stand-alone sensors were within 0.2°C of the reference standard. In the sensor-embedded socks, across multiple measurements for each of the six sensors, a high agreement (R2=1) between temperatures measured and the reference standard was observed. Patients reported that the socks were easy to use and comfortable, ranking them at a median score of 9 or 10 for comfort and ease of use on a 10-point scale. Case studies are presented showing that the temperature differences observed between the feet were consistent with clinical observations. CONCLUSIONS We report the first use of wireless continuous temperature monitoring for daily wear and home use in patients with diabetes and neuropathy. The wearers found the socks to be no different from standard socks. The temperature studies conducted show that the sensors used in the socks are reliable and accurate at detecting temperature and the findings matched clinical observations. Continuous temperature monitoring is a promising approach as an early warning system for foot ulcers, Charcot foot, and reulceration.