Search

The influence of precipitated nanophases on the mechanical properties of Fe-based amorphous nanocrystalline alloys is an urgent issue to be explored. Two amorphous nanocrystalline alloys, i.e., (Fe0.9Ni0.1)86B14 and (Fe0.7Ni0.3)86B14 containing nanophase of the body-centered cubic and face-centered cubic structures, respectively, were selected to investigate the effect of the structure and volume fraction of nanophase on their mechanical properties. The results of nanoindentation experiments and the calculation of the volume and size of the shear transition zone reveal that the two alloys show different mechanical properties. When the volume fraction of the nanophase in (Fe0.9Ni0.1)86B14 is larger than 50%, the elastic modulus is increased suddenly and the volume and size of the shear transition zone is decreased dramatically, while no dramatic change occurs in (Fe0.7Ni0.3)86B14. Moreover, it was found by using molecular dynamics simulations that the main reason for these abnormal mechanical properties is the change of cluster type in the system due to the incorporation of nanophases with different structures. [ABSTRACT FROM AUTHOR]

Metallic glasses (MGs) with unique disordered atomic stacking structures exhibit excellent catalytic performance in wastewater treatment. The catalytic degradation of Orange II (AO II) aqueous solutions by four CuZr-based MG ribbons under such processing parameters as pH values, the dosage of ribbons, and temperature was investigated in this paper. The catalytic performance of the MG ribbons was characterized by using the degradation efficiency of the dye wastewater. The phase constituent, surface morphology, and chemical valence state of elements on the surface of MG ribbons before and after use were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS), respectively. The results indicate that the Cu46Zr42Al7Y5 MG ribbon has the best catalytic performance among the Cu46Zr47-xAl7Yx (x = 0, 1, 3, 5) MGs in the degradation process, and the dye in the wastewater can almost be completely decolorized within 60 min under the conditions of pH = 2, the dosage of ribbons being 1.8 g/L and water bath temperature of 313 K, with the degradation efficiency and chemical oxygen demand removal being 96.05% and 51.73%, respectively. Furthermore, the Cu46Zr42Al7Y5 MG ribbon still shows superior structural stability and degradation performance after repeated use, and the corrosion pits on the MG surface promote the physicochemical reaction between the wastewater and the ribbons. [ABSTRACT FROM AUTHOR]

Compared with the conventional casting process, digital pattern-less casting technology has many advantages such as good machining accuracy, a short processing cycle, and low production cost. It is a new rapid manufacturing technology for castings, integrated with CAD/CAM, casting, CNC machining and many other advanced technologies. With this digital casting technology, no pattern is needed for making molds; it is precise, flexible, and green. Usually, art castings have complex structures and are made in small batches or even made in a single-piece, especially for large-sized art castings. So it has the shortcomings of high cost, low efficiency and long time for making a pattern to produce art castings with the conventional casting processes. However, the digital pattern-less casting technology can be applied to fabricate art castings, since it can greatly shorten the manufacturing cycle and lower the production cost, thus having a very good prospect. In this study, based on the digital pattern-less casting technology, a plaque casting with artistic Chinese characters (a Chinese poem) was designed and manufactured, and the production process was demonstrated in detail. [ABSTRACT FROM AUTHOR]

The influence of precipitated nanophases on the mechanical properties of Fe-based amorphous nanocrystalline alloys is an urgent issue to be explored. Two amorphous nanocrystalline alloys, i.e., (Fe 0.9 Ni 0.1 ) 86 B 14 and (Fe 0.7 Ni 0.3 ) 86 B 14 containing nanophase of the body-centered cubic and face-centered cubic structures, respectively, were selected to investigate the effect of the structure and volume fraction of nanophase on their mechanical properties. The results of nanoindentation experiments and the calculation of the volume and size of the shear transition zone reveal that the two alloys show different mechanical properties. When the volume fraction of the nanophase in (Fe 0.9 Ni 0.1 ) 86 B 14 is larger than 50%, the elastic modulus is increased suddenly and the volume and size of the shear transition zone is decreased dramatically, while no dramatic change occurs in (Fe 0.7 Ni 0.3 ) 86 B 14 . Moreover, it was found by using molecular dynamics simulations that the main reason for these abnormal mechanical properties is the change of cluster type in the system due to the incorporation of nanophases with different structures., (© 2024. The Author(s).)