Search

Objectives: The aim of this study was to investigate if and to what extent small lateral wedges inserted under the ski boot, known as canting, could impact knee kinematics/kinetics, balance, and neuromuscular activity in recreational alpine skiers in the laboratory setting., Design: Experimental, crossover study with repeated-measures analysis METHODS: Thirty-eight recreational skiers completed a single-leg postural balance test while wearing standardized ski boots in their unmodified state (control), and with medial and lateral canting wedges applied. Kinematics, kinetics, postural control measures, and neuromuscular activity of the lower extremity were assessed using optical motion capture, instrumented force plates, and electromyography., Results: Canting modifications had significant impact on lower extremity kinematics and kinetics: canting wedges on the medial side of the foot significantly decreased knee valgus moments, hip internal rotation, and hip adduction. Medial canting also improved some postural control measures associated with balance quality, and reduced activation levels of the Vastus Lateralis, Biceps Femoris, and Tibialis Anterior., Conclusions: In the laboratory setting, canting appears to be an appropriate option for improving balance in alpine skiers. Medial canting can alter skier kinematics and kinetics in ways which are consistent with mechanisms of ACL injury. Canting may also result in reduced neuromuscular effort. These changes in movement have potential to prevent lower limb injuries in alpine skiers. The findings of this study motivate future research to predict individual responses to canting treatment in a study setting more closely resembling the sports environment., (Copyright © 2020 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.)

Reduced stomatal conductance is a common plant response to rising atmospheric CO 2 and increases water use efficiency (W). At the leaf-scale, W depends on water and nitrogen availability in addition to atmospheric CO 2 . In hydroclimate models W is a key driver of rainfall, droughts, and streamflow extremes. We used global climate data to derive Aridity Indices (AI) for forests over the period 1965-2015 and synthesised those with data for nitrogen deposition and W derived from stable isotopes in tree rings. AI and atmospheric CO 2 account for most of the variance in W of trees across the globe, while cumulative nitrogen deposition has a significant effect only in regions without strong legacies of atmospheric pollution. The relation of aridity and W displays a clear discontinuity. W and AI are strongly related below a threshold value of AI ≈ 1 but are not related where AI > 1. Tree ring data emphasise that effective demarcation of water-limited from non-water-limited behaviour of stomata is critical to improving hydrological models that operate at regional to global scales., (© 2021. The Author(s).)

Inertial Measurement Units (IMUs), an alternative to 3D optical motion capture, are growing in popularity to assess sports-related movements. This study validated an IMU system against a "gold-standard" optical motion capture system during common sports movements. Forty-nine healthy adults performed six movements common to a variety of sports applications (cutting, running, jumping, single leg squats, and cross-over twist) while simultaneously outfitted with standard, retroreflective markers and a wireless IMU system. Bias, RMSE, precision, and maximum absolute error (MAE) were calculated to compare the two systems at the lower extremity joints and the trunk in all planes of movement and for all activities. The MAE difference between fast and slow activities for the sagittal, transverse, and frontal planes were 11.62°, 7.41°, and 5.82°, respectively. For bias, the IMU system tended to report larger angles than the optical motion capture system in the transverse and frontal planes and smaller angles in the sagittal plane. Average intraclass correlation coefficients for the sagittal, transverse, and frontal planes were 0.81±0.17, 0.38±0.19, and 0.22±0.37, respectively. When calculating a global bias across all three planes, the IMU system reported nearly identical angles (< 3.5° difference) to the optical motion capture system. The global precision across all planes was 2-6.5°, and the global RMSE was 7-10.5°. However, the global MAE was 11-23°. Overall, and with suggestions for methodological improvement to further reduce measurement errors, these results support current applications and also indicate the need for continued validation and improvement of IMU systems., Competing Interests: Declaration of Competing Interest Dr. Tashman reports personal fees from C-Motion, Journal of Biomechanics: Editorial or governing board, Smith & Nephew: Research support. All of these conflicts are outside the submitted work. None of the other authors have any conflicts to report., (Copyright © 2020. Published by Elsevier Ltd.)

Background: Increased posterior tibial slope and posterior medial meniscus root tears increase the force experienced by the anterior cruciate ligament (ACL) and predispose patients to higher rates of primary ACL injury or ACL graft failure after an ACL reconstruction (ACLR). However, the interplay among sagittal plane tibial slope, medial meniscus root tears, and ACLR graft force remains inadequately defined., Purpose/hypothesis: The purpose was to quantify the effect of sagittal plane tibial slope on ACLR graft force at varying knee flexion angles with an intact medial meniscus, a posterior medial meniscus root tear, and a medial meniscus root repair. Our null hypothesis was that changes in slope and meniscal state would have no effect on the forces experienced by the ACLR graft., Study Design: Controlled laboratory study., Methods: Ten male fresh-frozen cadaveric human knees underwent a posteriorly based high tibial osteotomy. A spanning external fixator and wedges of varying sizes were used to stabilize the osteotomy and allow for accurate slope adjustment. After ACLR, specimens were compressed with a 1000-N axial load at flexion angles of 0° and 30° for each of the 3 meniscal states and at tibial slopes of 0° to 15° at 3° increments. Graft loads were recorded through a force transducer clamped to the graft., Results: Increasing tibial slope led to a linear increase in ACLR graft force at 0° and 30° of knee flexion. Posterior medial meniscus root tear led to significant increases in ACLR graft forces over the intact state, while root repair restored the function of the medial meniscus as a secondary stabilizer. At 30° of knee flexion, the tibial slope effect on ACLR graft force was potentiated in the root tear state as compared with the intact and root repair states-test of interaction effect: t (139) = 2.67 ( P = .009)., Conclusion: Increases in tibial slope lead to a linear increase in ACLR graft forces, and this effect is magnified in the setting of a posterior medial meniscus root tear. At slopes >12°, a slope-changing osteotomy could be considered in the setting of a revision ACLR with a concomitant medial meniscus root tear., Clinical Relevance: Defining the relationship between tibial slope and varying states of meniscal insufficiency can help determine when it may be necessary to perform a slope-decreasing proximal tibial osteotomy before ACLR and meniscal repair.

Rates of change in intrinsic water use efficiency (W) of trees relative to those in atmospheric [CO 2 ] (c a ) have been mostly assessed via short-term studies (e.g., leaf analysis, flux analysis) and/or step increases in c a (e.g., FACE studies). Here we use compiled data for abundances of carbon isotopes in tree stems to show that on decadal scales, rates of change (dW/dc a ) vary with location and rainfall within the global tropics. For the period 1915-1995, and including corrections for mesophyll conductance and photorespiration, dW/dc a for drier tropical forests (receiving ~ 1000 mm rainfall) were at least twice that of the wettest (receiving ~ 4000 mm). The data also empirically confirm theorized roles of tropical forests in changes in atmospheric 13 C/ 12 C ratios (the 13 C Suess Effect). Further formal analysis of geographic variation in decade-to-century scale dW/dc a will be needed to refine current models that predict increases in carbon uptake by forests without hydrological cost.

Anatomical traits such as xylem conduit diameter and vessel connectivity are fundamental characteristics of the hydraulic architecture of vascular plants. Stem xylem conduits are narrow at the stem apex, and this confers resistance to embolisms that might otherwise be induced by large, negative water potentials at the top of tall trees. Below the apex, conduits progressively widen and this characteristic minimizes effects of path length on total hydraulic resistance. While interconnections among xylem vessels have been noted for decades, their role(s) are not fully clarified. For example, we do not know if they allow water to bypass embolized vessels, or increase the risk of spread of embolisms, or how their arrangement varies within a tree. Here we demonstrate the benefit of removing the independent effect of stem length on assessment of effects of external (e.g., climatic) factors on such xylem traits. We measured the hydraulic diameter (Dh) and vessel conductivity index (VCI) along the stem of 21 shrubs/trees of similar height (1.19 < H < 5.45 m) belonging to seven Acacia species, across a wide aridity gradient in Australia. All trees showed similar scaling exponents of Dh (b = 0.33) and VCI (b = 0.53) vs axial distance from the apex (L), thus conforming with general patterns in woody plants. After de-trending for L, neither Dh (P = 0.21) nor VCI (P = 0.109) differed across the aridity gradient. We found that across a wide gradient of aridity, climate had no effect on xylem anatomy of Acacia spp, which was instead dictated by axial distances from stem apices. We argue that the use of standardization procedures to filter out intrinsic patterns of vascular traits is an essential step in assessing climate-driven modifications of xylem architecture., (© The Author(s) 2018. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Background: The capsular ligaments and the labral suction seal cooperatively manage distractive stability of the hip. Capsular reconstruction using an iliotibial band (ITB) allograft aims to address capsular insufficiency and iatrogenic instability. However, the extent to which this procedure may restore hip distractive stability after a capsular defect is unknown., Purpose: To evaluate the biomechanical effects of capsular reconstruction on distractive stability of the hip joint., Study Design: Controlled laboratory study., Methods: Eight fresh-frozen cadaveric hip specimens were dissected to the level of the capsule and axially distracted in 3 testing states: intact capsule, partial capsular defect, and capsular reconstruction with an ITB allograft. Each femur was compressed with 500 N of force and then distracted 6 mm relative to the neutral position at 0.5 mm/s. Distractive force was continuously recorded, and the first peak delineating 2 phases of hip distractive stability in the force-displacement curve was analyzed., Results: The median force at maximum distraction in the capsular reconstruction state (156 N) was significantly greater than that in the capsular defect state (89 N; P = .036) but not significantly different from that in the intact state (218 N; P = .054). Median values for distractive force at first peak (60 N, 72 N, and 61 N, respectively; P = .607), distraction at first peak (2.3 mm, 2.3 mm, and 2.5 mm, respectively; P = .846), and percentage decrease in distractive force (35%, 78%, and 63%, respectively; P = .072) after the first peak were not significantly different between the intact, defect, and reconstruction states., Conclusion: Capsular reconstruction with an ITB allograft significantly increased the force required to distract the hip compared with a capsular defect in a cadaveric model. To our knowledge, this is the first study to report an initial peak distractive force and to propose 2 distinct phases of hip distractive stability., Clinical Relevance: The consequences of a capsular defect on distractive stability of the hip may be underappreciated among the orthopaedic community; with that said, capsular reconstruction using an ITB allograft provided significantly increased distractive stability and should be considered an effective treatment option for patients with symptomatic capsular deficiency.

Background: During multiple knee ligament reconstructions, the graft tensioning order may influence the final tibiofemoral orientation and corresponding knee kinematics. Nonanatomic tibiofemoral orientation may result in residual knee instability, altered joint loading, and an increased propensity for graft failure., Purpose: To biomechanically evaluate the effect of different graft tensioning sequences on knee tibiofemoral orientation after multiple knee ligament reconstructions in a bicruciate ligament (anterior cruciate ligament [ACL] and posterior cruciate ligament [PCL]) with a posterolateral corner (PLC)-injured knee., Study Design: Controlled laboratory study., Methods: Ten nonpaired, fresh-frozen human cadaveric knees were utilized for this study. After reconstruction of both cruciate ligaments and the PLC and proximal graft fixation, each knee was randomly assigned to each of 4 graft tensioning order groups: (1) PCL → ACL → PLC, (2) PCL → PLC → ACL, (3) PLC → ACL → PCL, and (4) ACL → PCL → PLC. Tibiofemoral orientation after graft tensioning was measured and compared with the intact state., Results: Tensioning the ACL first (tensioning order 4) resulted in posterior displacement of the tibia at 0° by 1.7 ± 1.3 mm compared with the intact state ( P = .002). All tensioning orders resulted in significantly increased tibial anterior translation compared with the intact state at higher flexion angles ranging from 2.7 mm to 3.2 mm at 60° and from 3.1 mm to 3.4 mm at 90° for tensioning orders 1 and 2, respectively (all P < .001). There was no significant difference in tibiofemoral orientation in the sagittal plane between the tensioning orders at higher flexion angles. All tensioning orders resulted in increased tibial internal rotation (all P < .001). Tensioning and fixing the PLC first (tensioning order 3) resulted in the most increases in internal rotation of the tibia: 2.4° ± 1.9°, 2.7° ± 1.8°, and 2.0° ± 2.0° at 0°, 30°, and 60°, respectively., Conclusion: None of the tensioning orders restored intact knee tibiofemoral orientation. Tensioning the PLC first should be avoided in bicruciate knee ligament reconstruction with concurrent PLC reconstruction because it significantly increased tibial internal rotation. We recommend that the PCL be tensioned first, followed by the ACL, to avoid posterior translation of the tibia in extension where the knee is primarily loaded during most activities. The PLC should be tensioned last., Clinical Relevance: This study will help guide surgeons in decision making for the graft tensioning order during multiple knee ligament reconstructions.

Background: Metal screws are traditionally used to fix the coracoid process to the glenoid. Despite stable fixation, metal screws have been associated with hardware complications. Therefore, some studies have advocated for suture button fixation during the Latarjet procedure to reduce the complications associated with screw fixation., Purpose: To biomechanically evaluate the ultimate failure load of a cortical button and self-tensioning suture versus metal screws for coracoid graft fixation during the Latarjet procedure., Study Design: Controlled laboratory study., Methods: Eight matched pairs of fresh-frozen, male cadaveric shoulders (N = 16) underwent the Latarjet procedure. The shoulders of each pair were randomly assigned to 1 of 2 groups: fixation using two 3.75-mm cannulated, fully threaded metal screws or fixation using a double suture button construct. Specimens were secured in a dynamic testing machine and cyclically preconditioned from 2 to 10 N at 0.1 Hz for 10 cycles. After preconditioning, specimens were pulled to failure at a normalized displacement rate of 400% of the measured gauge length per minute. The ultimate failure load and mechanism of failure were recorded for each specimen., Results: The mean ultimate load to failure for screw fixation (226 ± 114 N; 95% CI, 147-305 N) was not significantly different from that for suture button fixation (266 ± 73 N; 95% CI, 216-317 N) ( P = .257). The mean strain at failure for screw fixation (63% ± 21%; 95% CI, 48%-77%) was not significantly different from that for suture button fixation (86% ± 26%; 95% CI, 69%-104%) ( P = .060). The most common mechanism of failure for the screw fixation method was at the bone block drill holes, while an intramuscular rupture at the clamp-muscle interface occurred for the suture button construct., Conclusion: The screw and suture button fixation techniques exhibited comparable biomechanical strength for coracoid bone block fixation of the Latarjet procedure., Clinical Relevance: Metal screws have been reported to be a large contributor to intraoperative and postoperative complications. Therefore, given the results of the current study, a suture button construct may be an alternative to metal screw fixation during the Latarjet procedure. However, further clinical studies are warranted., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: This study was partially supported by Arthrex and internally by the Steadman Philippon Research Institute. M.T.P. is a paid consultant for Arthrex and the Joint Restoration Foundation (AlloSource) and receives royalties from Arthrex and SLACK. A.S.B. has received financial/material support from Smith & Nephew. R.F.L. is a consultant for Arthrex, Ossur, and Smith & Nephew; receives royalties from Arthrex, Ossur, and Smith & Nephew; and receives research support from Arthrex, Ossur, Linvatec, and Smith & Nephew.

Background: Quantification of the biomechanical properties of each individual medial patellar ligament will facilitate an understanding of injury patterns and enhance anatomic reconstruction techniques by improving the selection of grafts possessing appropriate biomechanical properties for each ligament., Purpose: To determine the ultimate failure load, stiffness, and mechanism of failure of the medial patellofemoral ligament (MPFL), medial patellotibial ligament (MPTL), and medial patellomeniscal ligament (MPML) to assist with selection of graft tissue for anatomic reconstructions., Study Design: Descriptive laboratory study., Methods: Twenty-two nonpaired, fresh-frozen cadaveric knees were dissected free of all soft tissue structures except for the MPFL, MPTL, and MPML. Two specimens were ultimately excluded because their medial structure fibers were lacerated during dissection. The patella was obliquely cut to test the MPFL and the MPTL-MPML complex separately. To ensure that the common patellar insertion of the MPTL and MPML was not compromised during testing, only one each of the MPML and MPTL were tested per specimen (n = 10 each). Specimens were secured in a dynamic tensile testing machine, and the ultimate load, stiffness, and mechanism of failure of each ligament (MPFL = 20, MPML = 10, and MPTL = 10) were recorded., Results: The mean ± SD ultimate load of the MPFL (178 ± 46 N) was not significantly greater than that of the MPTL (147 ± 80 N; P = .706) but was significantly greater than that of the MPML (105 ± 62 N; P = .001). The mean ultimate load of the MPTL was not significantly different from that of the MPML ( P = .210). Of the 20 MPFLs tested, 16 failed by midsubstance rupture and 4 by bony avulsion on the femur. Of the 10 MPTLs tested, 9 failed by midsubstance rupture and 1 by bony avulsion on the patella. Finally, of the 10 MPMLs tested, all 10 failed by midsubstance rupture. No significant difference was found in mean stiffness between the MPFL (23 ± 6 N/mm 2 ) and the MPTL (31 ± 21 N/mm 2 ; P = .169), but a significant difference was found between the MPFL and the MPML (14 ± 8 N/mm 2 ; P = .003) and between the MPTL and MPML ( P = .028)., Conclusion: The MPFL and MPTL had comparable ultimate loads and stiffness, while the MPML had lower failure loads and stiffness. Midsubstance failure was the most common type of failure; therefore, reconstruction grafts should meet or exceed the values reported herein., Clinical Relevance: For an anatomic medial-sided knee reconstruction, the individual biomechanical contributions of the medial patellar ligamentous structures (MPFL, MPTL, and MPML) need to be characterized to facilitate an optimal reconstruction design.

Biological nitrogen fixation (BNF) by crop legumes reduces demand for industrial nitrogen fixation (INF). Nonetheless, rates of BNF in agriculture remain low, with strong negative feedback to BNF from reactive soil nitrogen (N) and drought. We show that breeding for yield has resulted in strong relationships between photosynthesis and leaf N in non-leguminous crops, whereas grain legumes show strong relations between leaf N and water use efficiency (WUE). We contrast these understandings with other studies that draw attention to the water costs of grain legume crops, and their potential for polluting the biosphere with N. We propose that breeding grain legumes for reduced stomatal conductance can increase WUE without compromising production or BNF. Legume crops remain a better bet than relying on INF., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Background: Superior capsular reconstruction (SCR) was recently introduced as a treatment for irreparable superior rotator cuff tears in younger patients. Purpose/Hypothesis: The purpose was to assess the biomechanical strength of 3 methods for fixation of the graft to the glenoid for SCR. It was hypothesized that a 4-anchor technique would provide greater load to failure than 3-anchor techniques., Study Design: Controlled laboratory study., Methods: Thirty-six cadaveric specimens were randomized into 3 groups of previously established glenoid-side graft fixation techniques: (1) three 3.5-mm knotless screw-in anchors, (2) three 3.0-mm knotless push-in anchors, and (3) a 4-anchor hybrid construct with two 3.0-mm knotted push-in anchors and two 2.9-mm knotless push-in anchors. The repairs were cyclically loaded at 0.5 Hz from 10 to 200 N, then pulled to failure. Elongation, stiffness, maximum load at failure, and mode of failure were recorded and calculated., Results: There were no significant differences in graft elongation or stiffness among the 3 techniques ( P > .37 and P > .26, respectively). Maximum load to failure was significantly greater in technique 1 (mean ± SD, 427.85 ± 119.70 N) than technique 3 (319.5 ± 57.60 N) ( P = 0.024). There were no significant differences in load to failure between techniques 1 and 2 or between techniques 2 and 3., Conclusion: Glenoid-side graft fixation with 3 threaded 3.5-mm suture anchors showed a significant superior pull-out strength when compared with a 4-anchor hybrid technique and thus might be recommended in SCR for patients with irreparable superior rotator cuff tears to achieve maximum stability., Clinical Relevance: SCR presents a novel alternative for treatment of irreparable superior rotator cuff tears in younger patients. Glenoid fixation is essential to provide adequate fixation of the graft to prevent the humeral head from rising and to restore normal biomechanics.

Background: Limited information in basic science and clinical trials exists to determine if ligament healing may be accelerated with the use of biological adjuvants, such as platelet-rich plasma (PRP). However, there has been widespread acceptance of PRP for use in clinical practice, despite an inadequate understanding of its biological mechanism of action., Purpose: To determine whether a single dose of PRP could accelerate ligament healing and correspondingly improve histological characteristics and biomechanical properties when injected immediately postoperatively into the injured medial collateral ligament (MCL) of New Zealand White rabbits., Study Design: Controlled laboratory study., Methods: Eighty skeletally mature New Zealand White rabbits (160 knees) were used. The MCL was torn midbody to simulate a grade 3 tear. After an acute injury of the MCL, the administration of autologous PRP at 3 different platelet concentrations (0 million/uL, platelet-poor plasma [PPP]; 0.6 million/uL, 2 times the baseline [2× PRP]; and 1.2 million/uL, 4 times the baseline [4× PRP]) was performed and compared with a saline injection control in the contralateral knee. Histological analysis and a biomechanical endpoint characterization were utilized to assess ligamentous healing and compare it to a sham surgery group., Results: The PPP ( P = .001) and 4× PRP ( P = .002) groups had a significantly lower collagen subscore than the sham surgery group. No other differences were observed among the treatment groups, including the vascularity subscore and overall ligament tissue maturity index score. Compared with saline-injected contralateral knees, the maximum load for PPP and 2× PRP was not significantly different ( P = .788 and .325, respectively). The maximum load and stiffness for knees treated with 4× PRP were significantly less than for the saline-treated contralateral knees ( P = .006 and .001, respectively)., Conclusion: One single dose of PPP or 2× PRP at the time of injury did not improve ligament healing. In addition, 4× PRP negatively affected ligament strength and histological characteristics at 6 weeks after the injury., Clinical Relevance: The current practice of treating knee ligament injuries with PRP may not improve healing at low doses of PRP. The decreased mechanical properties and histological appearance of the torn MCL suggest that high doses of PRP decrease the quality of repair tissue. Further in vivo studies are necessary to determine the dosing and timing of PRP administration after a ligament injury before the widespread use of PRP to treat ligament injuries is recommended.

In nonagricultural systems, the relationship between intrinsic water-use efficiency (WUE i ) and leaf nitrogen (N area ) is known to be stronger for legumes than for nonlegumes. We tested whether these relationships are retained for major agricultural legumes and nonlegumes. We compared the response to N nutrition of WUE i (and its component parts, photosynthesis (A sat ) and stomatal conductance (g s )) for legumes Cicer arietinum, Glycine max, Lupinus alba and Vicia faba, nonlegume dicots Brassica napus and Helianthus annus, and nonlegume cereals Hordeum vulgare and Triticum aestivum. Surprisingly, and in contrast to studied cereals and nonlegume dicots, N area was positively related to photosynthesis in the legumes, explaining nearly half of the variance in A sat . WUE i was tightly coupled to N area for agricultural legumes and nonlegume dicots, but not for cereal crops. Our analysis suggests that breeding efforts to reduce g s in legumes could increase WUE i by 120-218% while maintaining A sat at nonlegume values. Physiologically informed breeding of legumes can enhance sustainable agriculture by reducing requirements for water and N., (© 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.)

Islet engraftment after transplantation is impaired by high rates of islet/β cell death caused by cellular stressors and poor graft vascularization. We studied whether cotransplantation of ex vivo expanded autologous bone marrow-derived mesenchymal stem cells (MSCs) with islets is safe and beneficial in chronic pancreatitis patients undergoing total pancreatectomy with islet autotransplantation. MSCs were harvested from the bone marrow of three islet autotransplantation patients and expanded at our current Good Manufacturing Practices (cGMP) facility. On the day of islet transplantation, an average dose of 20.0 ± 2.6 ×10 6 MSCs was infused with islets via the portal vein. Adverse events and glycemic control at baseline, 6, and 12 months after transplantation were compared with data from 101 historical control patients. No adverse events directly related to the MSC infusions were observed. MSC patients required lower amounts of insulin during the peritransplantation period (p = .02 vs. controls) and had lower 12-month fasting blood glucose levels (p = .02 vs. controls), smaller C-peptide declines over 6 months (p = .01 vs. controls), and better quality of life compared with controls. In conclusion, our pilot study demonstrates that autologous MSC and islet cotransplantation may be a safe and potential strategy to improve islet engraftment after transplantation. (Clinicaltrials.gov registration number: NCT02384018). Stem Cells Translational Medicine 2018;7:11-19., (© 2017 The Authors Stem Cells Translational Medicine published by Wiley Periodicals, Inc. on behalf of AlphaMed Press.)

Background: Arthrofibrosis in the suprapatellar pouch and anterior interval can develop after knee injury or surgery, resulting in anterior knee pain. These adhesions have not been biomechanically characterized., Methods: The biomechanical effects of adhesions in the suprapatellar pouch and anterior interval during simulated quadriceps muscle contraction from 0 to 90° of knee flexion were assessed. Adhesions of the suprapatellar pouch and anterior interval were hypothesized to alter the patellofemoral contact biomechanics and increase the patellofemoral contact force compared to no adhesions., Results: Across all flexion angles, suprapatellar adhesions increased the patellofemoral contact force compared to no adhesions by a mean of 80 N. Similarly, anterior interval adhesions increased the contact force by a mean of 36 N. Combined suprapatellar and anterior interval adhesions increased the mean patellofemoral contact force by 120 N. Suprapatellar adhesions resulted in a proximally translated patella from 0 to 60°, and anterior interval adhesions resulted in a distally translated patella at all flexion angles other than 15° (p < 0.05)., Conclusions: The most important finding in this study was that patellofemoral contact forces were significantly increased by simulated adhesions in the suprapatellar pouch and anterior interval. Anterior knee pain and osteoarthritis may result from an increase in patellofemoral contact force due to patellar and quadriceps tendon adhesions. For these patients, arthroscopic lysis of adhesions may be beneficial.

Plant survival in many ecosystems requires tolerance of large radiation loads, unreliable water supply and suboptimal soil fertility. We hypothesized that increased production of neutral lipids (triacylglycerols, TAGs) in plant leaves is a mechanism for dissipating excess radiation energy. In a greenhouse experiment, we combined drought and shade treatments and examined responses among four species differing in life form, habitat, and drought- and shade-tolerance. We also present a lipid extraction protocol suitable for sclerophyllous leaves of native Australian trees (e.g. Acacia, Eucalyptus). Fluorescence measurements indicated that plants exposed to full sunlight experienced mild photoinhibition during our experiment. Accumulation of TAGs did not follow photosynthetic capacity, but instead, TAG concentration increased with non-photochemical quenching. This suggests that plants under oxidative stress may increase biosynthesis of TAGs. Moderate drought stress resulted in a 60% reduction in TAG concentration in wheat (Triticum aestivum). Shading had no effect on TAGs, but increased concentrations of polar lipids in leaves; for example, acclimation to shade in Austrodanthonia spp., a native Australian grass, resulted in a 60% increase in associated polar lipids and higher foliar chlorophyll concentrations. Shading also reduced the digalactosyldiacylglycerol:monogalactosyldiacylglycerol (DGDG:MGDG) ratio in leaves, with a corresponding increase in the degree of unsaturation and thus fluidity of thylakoid membranes of chloroplasts. Our results suggest that prevention of photodamage may be coordinated with accumulation of TAGs, although further research is required to determine if TAGs serve a photoprotective function in plant leaves., (© 2017 Scandinavian Plant Physiology Society.)

Purpose: To directly compare effectiveness of the inside-out and all-inside medial meniscal repair techniques in restoring native contact area and contact pressure across the medial tibial plateau at multiple knee flexion angles., Methods: Twelve male, nonpaired (n = 12), fresh-frozen human cadaveric knees underwent a series of 5 consecutive states: (1) intact medial meniscus, (2) MCL tear and repair, (3) simulated bucket-handle longitudinal tear of the medial meniscus, (4) inside-out meniscal repair, and (5) all-inside meniscal repair. Knees were loaded with a 1,000-N axial compressive force at 5 knee flexion angles (0°, 30°, 45°, 60°, 90°), and contact area, mean contact pressure, and peak contact pressure were calculated using thin film pressure sensors., Results: No significant differences were observed between the inside-out and all-inside repair techniques at any flexion angle for contact area, mean contact pressure, and peak contact pressure (all P > .791). Compared with the torn meniscus state, inside-out and all-inside repair techniques resulted in increased contact area at all flexion angles (all P < .005 and all P < .037, respectively), decreased mean contact pressure at all flexion angles (all P < .007 and all P < .001, respectively) except for 0° (P = .097 and P = .39, respectively), and decreased peak contact pressure at all flexion angles (all P < .001, all P < .001, respectively) except for 0° (P = .080 and P = .544, respectively). However, there were significant differences in contact area and peak contact pressure between the intact state and inside-out technique at angles ≥45° (all P < .014 and all P < .032, respectively). Additionally, there were significant differences between the intact state and all-inside technique in contact area at 60° and 90° and peak contact pressure at 90° (both P < .005 and P = .004, respectively). Median values of intact contact area, mean contact pressure, and peak contact pressure over the tested flexion angles ranged from 498 to 561 mm 2 , 786 to 997 N/mm 2 , and 1,990 to 2,215 N/mm 2 , respectively., Conclusions: Contact area, mean contact pressure, and peak contact pressure were not significantly different between the all-inside and inside-out repair techniques at any tested flexion angle. Both techniques adequately restored native meniscus biomechanics near an intact level., Clinical Relevance: An all-inside repair technique provided similar, native-state-restoring contact mechanics compared with an inside-out repair technique for the treatment of displaced bucket-handle tears of the medial meniscus. Thus, both techniques may adequately decrease the likelihood of cartilage degeneration., (Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: Varus failure is one of the most common failure modes following surgical treatment of proximal humeral fractures. Straight antegrade nails (SAN) theoretically provide increased stability by anchoring to the densest zone of the proximal humerus (subchondral zone) with the end of the nail. The aim of this study was to biomechanically investigate the characteristics of this "proximal anchoring point" (PAP). We hypothesized that the PAP would improve stability compared to the same construct without the PAP., Methods: Straight antegrade humeral nailing was performed in 20 matched pairs of human cadaveric humeri for a simulated unstable two-part fracture., Results: Biomechanical testing, with stepwise increasing cyclic axial loading (50-N increments each 100 cycles) at an angle of 20° abduction revealed significantly higher median loads to failure for SAN constructs with the PAP (median, 450 N; range, 200-1.000 N) compared to those without the PAP (median, 325 N; range, 100-500 N; p = 0.009). SAN constructs with press-fit proximal extensions (endcaps) showed similar median loads to failure (median, 400 N; range, 200-650 N), when compared to the undersized, commercially available SAN endcaps (median, 450 N; range, 200-600 N; p = 0.240)., Conclusions: The PAP provided significantly increased stability in SAN constructs compared to the same setup without this additional proximal anchoring point. Varus-displacing forces to the humeral head were superiorly reduced in this setting. This study provides biomechanical evidence for the "proximal anchoring point's" rationale. Straight antegrade humeral nailing may be beneficial for patients undergoing surgical treatment for unstable proximal humeral fractures to decrease secondary varus displacement and thus potentially reduce revision rates.

Purpose: The purpose of this study was to determine the biomechanical effects of simulated immediate motion and weightbearing during rehabilitation on different double-bundle posterior cruciate ligament reconstruction (DB-PCLR) graft options., Methods: Nine each of commercially prepared (allograft) Achilles tendon allografts, fresh-frozen (autograft) bone-patellar tendon-bone grafts, and fresh-frozen quadriceps tendon grafts were paired with commercially prepared anterior tibialis allografts, fresh-frozen semitendinosus grafts, and fresh-frozen semitendinosus grafts, respectively. Graft pairs were loaded to simulate early range of motion on a stationary bicycle, partial weightbearing (30 %), and full weightbearing., Results: Acquired laxity (displacement, mm) between graft pairs was not significantly different during simulated early range of motion. However, during simulated partial weightbearing, the median acquired laxity of the patellar tendon/semitendinosus pair (1.06 mm) was significantly less than that of the quadriceps tendon/semitendinosus (1.50 mm, p = 0.01) and Achilles/anterior tibialis (1.44 mm, p = 0.003) graft pairs. During simulated full weightbearing, significantly less acquired laxity was observed for the patellar tendon/semitendinosus graft pair (2.38 mm) compared to the Achilles/anterior tibialis pair (4.85 mm, p = 0.04), but a significant difference was not observed compared to the QT/semitendinosus graft pair (3.91 mm, n.s.). There were no significant differences in the ultimate loads between any of the graft pairs., Conclusions: Simulated early range of motion and early partial weightbearing did not result in clinically significant acquired graft laxity in common graft options utilized for DB-PCLR. However, simulated full weightbearing did result in clinically significant acquired graft laxity, and therefore, early rehabilitation protocols should avoid implementing full weightbearing that could contribute to graft failure.

Background: A need exists for a functional anterior cruciate ligament (ACL) brace that dynamically supports the knee joint to match the angle-dependent forces of a native ACL, especially in the early postoperative period., Purpose/hypothesis: The purpose of this study was to quantify the posteriorly directed external forces applied to the anterior proximal tibia by both a static and a dynamic force ACL brace. The proximal strap forces applied by the static force brace were hypothesized to remain relatively constant regardless of knee flexion angle compared with those of the dynamic force brace., Study Design: Controlled laboratory study., Methods: Seven healthy adult males (mean age, 27.4 ± 3.4 years; mean height, 1.8 ± 0.1 m; mean body mass, 84.1 ± 11.3 kg) were fitted with both a static and a dynamic force ACL brace. Participants completed 3 functional activities: unloaded extension, sit-to-stand, and stair ascent. Kinematic data were collected using traditional motion-capture techniques while posteriorly directed forces applied to the anterior aspect of both the proximal and distal tibia were simultaneously collected using a customized pressure-mapping technique., Results: The mean posteriorly directed forces applied to the proximal tibia at 30° of flexion by the dynamic force brace during unloaded extension (80.2 N), sit-to-stand (57.5 N), and stair ascent (56.3 N) activities were significantly larger, regardless of force setting, than those applied by the static force brace (10.1 N, 9.5 N, and 11.9 N, respectively; P < .001)., Conclusion: The dynamic force ACL brace, compared with the static force brace, applied significantly larger posteriorly directed forces to the anterior proximal tibia in extension, where the ACL is known to experience larger in vivo forces. Further studies are required to determine whether the physiological behavior of the brace will reduce anterior knee laxity and improve long-term patient outcomes., Clinical Relevance: ACL braces that dynamically restrain the proximal tibia in a manner similar to physiological ACL function may improve pre- and postoperative treatment., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: Össur funded this study and provided unrestricted, in-kind donations of the braces utilized in this study. R.F.L. is a consultant for and receives royalties from Össur, Arthrex, and Smith & Nephew.

Background: Dislocation of the proximal tibiofibular joint is a complex injury that is often overlooked or misdiagnosed. Surgical management is recommended for severe acute or for chronic symptomatic instability of the proximal tibiofibular joint. Although the anterior ligamentous complex has been reported to be stronger than the posterior complex, biomechanical data are lacking., Purpose: To determine the ultimate load of the anterior and posterior ligamentous complexes of the proximal tibiofibular joint to determine optimal graft selection., Study Design: Controlled laboratory study., Methods: Ten nonpaired, fresh-frozen knee specimens were dissected to expose the anterior and posterior proximal tibiofibular ligamentous complexes. The tibia was split in the coronal plane to separate the anterior and posterior ligamentous complexes, and the fibula was left intact. Specimens were secured in a dynamic testing machine and preconditioned for 10 cycles between 2 and 10 N at 0.1 Hz followed by loading to failure at a rate of 25 mm/min., Results: The mean (±SD) ultimate load of the anterior complex (517 ± 144 N) was significantly greater than the mean ultimate load of the posterior complex (322 ± 160 N) ( P = .012). The mean surface areas of the anterior and posterior complexes were 761 ± 174 mm 2 and 565 ± 103 mm 2 , respectively ( P = .008). The mean values for stiffness of the anterior (133 N/mm) and posterior (109 N/mm) complexes were similar ( P = .250)., Conclusion: The ligaments of the human proximal tibiofibular joint were able to withstand a mean ultimate failure load of 517 ± 144 N for the anterior complex and 322 ± 160 N for the posterior complex. In this regard, it is recommended that the strengths of grafts chosen for proximal tibiofibular reconstructions meet or exceed these values., Clinical Relevance: The optimal surgical treatment for addressing residual proximal tibiofibular instability is not well defined. Before an anatomic reconstruction of the proximal tibiofibular ligament is developed, the individual biomechanical properties of the anterior and posterior ligamentous structures of the proximal tibiofibular joint need to be considered to facilitate an optimal reconstruction design.

Purpose: To investigate glenoid fixation for superior capsule reconstruction (SCR) and evaluate anchor positions, intraosseous trajectories, and proximity to the suprascapular nerve (SSN) and glenoid fossa. The secondary purpose was to provide technical pearls and pitfalls for anchor insertion on the superior glenoid during SCR., Methods: Three beath pins were arthroscopically inserted into 12 (n = 12) nonpaired human cadaveric shoulders through Neviaser, anterior, and posterior portals to simulate anchor placement on the superior glenoid during SCR. Computed tomography scans were performed to evaluate anchor positioning and insertion trajectories. Specimens were then dissected to delineate the anatomic relations of the beath pins to the SSN and glenoid fossa., Results: The superior glenoid anchor position was a mean 15.0 ± 4.0 mm to the SSN and 6.5 ± 1.7 mm to the glenoid fossa. The posterior glenoid anchor position was a mean 11.8 ± 2.1 mm to the SSN and 2.9 ± 2.9 mm to the glenoid fossa. On average, the superior pin was placed at 12:30 ± 0:30 (left-sided glenoid clock face) and inserted at 19° ± 9° with respect to the sagittal plane of the glenoid, the anterior pin was placed at 11:00 ± 0:30 and inserted 40° ± 17° off the glenoid, and the posterior pin was placed at 3:00 ± 1:00 and inserted at 52° ± 12° off the glenoid., Conclusions: The results of the present cadaveric study showed that glenoid fixation was safe with respect to the SSN and delineated technical guidelines and trajectories for inserting 3 anchors into the glenoid., Clinical Relevance: This study shows that 3 anchors can be inserted into the glenoid without a risk of SSN damage and delineates technical guidelines for anchor insertion., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: A subset of patients have clinical internal and/or external knee rotational instability despite no apparent injury to the cruciate or collateral ligaments., Purpose/hypothesis: The purpose of this study was to assess the effect of sequentially cutting the posterolateral, anterolateral, posteromedial, and anteromedial structures of the knee on rotational stability in the setting of intact cruciate and collateral ligaments. It was hypothesized that cutting of the iliotibial band (ITB), anterolateral ligament and lateral capsule (ALL/LC), posterior oblique ligament (POL), and posteromedial capsule (PMC) would significantly increase internal rotation, while sectioning of the anteromedial capsule (AMC) and the popliteus tendon and popliteofibular ligament (PLT/PFL) would lead to a significant increase in external knee rotation., Study Design: Controlled laboratory study., Methods: Ten pairs (N = 20) of cadaveric knees were assigned to 2 sequential cutting groups (group 1: posterolateral-to-posteromedial [PL → PM] and group 2: posteromedial-to-posterolateral [PM → PL]). Specimens were subjected to applied 5-N·m internal and external rotation torques at knee flexion angles of 0°, 30°, 60°, and 90° while intact and after each cut state. Rotational changes were measured and compared with the intact and previous cut states., Results: Sectioning of the ITB significantly increased internal rotation at 60° and 90° by 5.4° and 6.2° in group 1 (PL → PM) and 3.5° and 3.8° in group 2 (PM → PL). PLT/PFL complex sectioning significantly increased external rotation at 60° and 90° by 2.7° and 2.9° in group 1 (PL → PM). At 60° and 90° in group 2 (PM → PL), ALL/LC sectioning produced significant increases in internal rotation of 3.1° and 3.5°, respectively. In group 2 (PM → PL), POL sectioning produced a significant increase in internal rotation of 2.0° at 0°. AMC sectioning significantly increased external rotation at 30° to 90° of flexion with a magnitude of change of <1° in both groups 1 (PL → PM) and 2 (PM → PL)., Conclusion: Collectively, the anterolateral corner structures provided primary internal rotation control of the knee from 60° to 90° of knee flexion in knees with intact cruciate and collateral ligaments. The ITB was the most significant primary stabilizer of internal rotation. The POL had a primary role for internal rotational stability at full extension. The PLT/PFL complex was a primary stabilizer for external rotation of the knee at 60° and 90°., Clinical Relevance: This study delineates the primary and secondary roles of the ITB, ALL/LC, POL, and PLT/PFL to rotatory stability of the knee and provides new information to understand knee rotational instabilities., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: R.F.L. is a consultant for Arthrex, Ossur, and Smith & Nephew; receives royalties from Arthrex and Smith & Nephew; and receives research support from Arthrex, Ossur, and Smith & Nephew. J.M.S. receives royalties from Arthrex, Tornier, and Zimmer-Biomet; receives other financial/material support from Smith & Nephew ; receives research support from Synthes and Zimmer-Biomet; is a paid consultant for Tornier, Zimmer-Biomet, and Wright Medical Technology; is a paid presenter for Tornier, Zimmer-Biomet, and Wright Medical Technology; and has stock/stock options in Tornier. G.M. has received research grants from South-Eastern Norway Health Authorities (Helse Sør-Øst) and Arthrex.

Background: Controversy exists regarding the ideal Achilles rupture treatment; however, operative treatment is considered for athletes and active patients. The ideal repair construct is evolving, and the effect of suture caliber or number of core strands has not been studied., Methods: Simulated mid-substance Achilles ruptures were performed in 24 cadavers. Specimens were randomized to three 6-core-strand style repair constructs: (1) 4 No. 2 sutures and two 2-mm tapes (2T); (2) 2 No. 2 sutures and four 2-mm tapes (4T); (3) 12 (double-6-strand) strand repair (12 No. 2-0 sutures [12S]). Repairs were subjected to a cyclic loading protocol representative of postoperative rehabilitation. These data were compared to a previously published standard open repair technique (6-core strands with No. 2 sutures) on 9 specimens tested under the same conditions. 6 Results: No significant elongation differences were observed between the repair groups and the previously published standard repair group in the first 2 stages of the simulated rehabilitation protocol. Both the 2T and 12S repairs survived a significantly greater number of cycles to failure ( P = 0.0005, P = 0.0267, respectively) and had a significantly higher failure load ( P = .0005, P = .0118, respectively) compared to the previously published data. These 2 constructs consistently survived the advanced stages of the simulated rehabilitation protocol. The majority of repairs failed at the knots., Conclusions: In this study, the 2T and 12S constructs survived the later stages of our simulated rehabilitation protocol, suggesting that they may be able to accommodate a more aggressive clinical rehabilitation protocol. Substituting suture-tape for 2 core strands or doubling the core strands with a smaller-caliber suture created a biomechanically stronger construct., Clinical Relevance: Achilles repair with an added nonabsorbable, high-tensile strength tape allowed for a stronger construct that may allow for a more aggressive, early rehabilitation protocol and earlier return to function.

Background: The Latarjet procedure is commonly performed using either the classic or the congruent-arc technique. Each technique has potential clinical advantages and disadvantages. However, data on the anatomic and biomechanical effects, benefits, and limitations of each technique are limited. Hypothesis/Purpose: To compare the anatomy and biomechanical fixation strength (failure load) between the 2 techniques. It was hypothesized that the classic technique would have superior initial fixation when compared with the congruent-arc technique and that this would be affected by sex and coracoid size., Study Design: Controlled laboratory study., Methods: A biomechanical cadaver study was performed with 20 pairs of male and female shoulders. One of each pair of shoulders was randomly assigned to receive the classic or congruent-arc technique. Coracoid and glenoid anatomic measurements were collected before biomechanical testing. A tensile force was applied through the conjoined tendon to replicate forces experienced by the coracoid graft in the early postoperative period, and the failure load was determined for each specimen., Results: The mean ± SD surface area available for fixation was 263 ± 63 mm 2 in the classic technique compared with 177 ± 63 mm 2 in the congruent-arc group ( P < .001). 36% of the glenoid width was recreated in the classic group and 50% in the congruent-arc group ( P < .001). The congruent-arc technique resulted in a significantly lower ( P = .005) mean failure load (239 ± 91 N) compared with the classic technique (303 ± 114 N). Failure load was significantly higher in males ( P = .037); male specimens had a mean failure load of 344 ± 122 N for the classic technique and 289 ± 73 N for the congruent-arc technique, and females had a mean failure load of 266 ± 98 N and 194 ± 84 N, respectively., Conclusion: In this biomechanical model, the classic technique of the Latarjet procedure provided a greater surface area for healing to the glenoid and superior initial fixation when compared with the congruent-arc technique. The congruent-arc technique allowed restoration of a larger glenoid defect., Clinical Relevance: The classic and congruent-arc techniques of coracoid transfer have anatomic and biomechanical advantages and disadvantages that should be considered when choosing between the 2 techniques.

Background: Straight antegrade intramedullary nailing of proximal humerus fractures has shown promising clinical results. However, up to 36% of all humeri seem to be "critical types" in terms of the potential violation of the supraspinatus (SSP) tendon footprint by the nail's insertion zone. The aims of this study were to evaluate if a computed tomography (CT) scan could reliably predict the nail's entry point on the humeral head and if it would be possible to preoperatively estimate the individual risk of iatrogenic violation of the SSP tendon footprint by evaluating the uninjured contralateral humerus., Methods: Twenty matched pairs of human cadaveric shoulders underwent CT scans, and the entry point for an antegrade nail as well as measurements regarding critical distances between the entry point and the rotator cuff were determined. Next, gross anatomic measurements of the same data were performed and compared. Furthermore, specimens were reviewed for critical types., Results: Overall, 42.5% of all specimens were found to be critical types. The CT measurements exhibited excellent intra-rater and inter-rater reliability (intraclass correlation coefficients >0.90). Similarly, excellent agreement between the CT scan and gross anatomic measurements in contralateral shoulders (intraclass correlation coefficients >0.88) was found., Conclusion: Assessing the uninjured contralateral side, CT can reliably predict the entry point in antegrade humeral nailing and preoperatively identify critical types of humeral heads at risk of iatrogenic implantation damage to the SSP tendon footprint. This study may help surgeons in the decision-making processon which surgical technique should be used without putting the patient at risk for iatrogenic, implant-related damage to the rotator cuff., (Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Purpose: To compare radiographic and 3-dimensional (3D) computed tomography (CT) imaging modalities for the screening of anterior inferior iliac spine (AIIS) impingement by establishing imaging measurement related to the AIIS., Methods: Anteroposterior and false-profile radiographs and 3D CT scans were obtained on 10 human cadaveric pelvises. On the anteroposterior view for each methodology, 2 measurements were calculated: distance to the most lateral AIIS from the 12 o'clock position on the acetabular rim, and the angle between the lateral AIIS and the sagittal plane. On the false-profile view for each methodology, 2 measurements were calculated: distance to the anterior AIIS from the 12 o'clock position on the acetabular rim, and the angle between the anterior AIIS and the sagittal plane. Inter-rater and intrarater reliability analyses were performed for both methods in addition to an intermethod analysis., Results: The radiographic false-profile view was the most repeatable orientation, with intraclass correlation coefficients showing excellent reproducibility in both inter-rater (angle: 0.980, distance: 0.883) and intrarater (angle: 0.995, distance: 0.995) analyses. The mean distance from the 12 o'clock position of the acetabular rim to the most anterior/lateral aspect of the AIIS was 41.4 mm and 16.0 mm on the radiographic false-profile and anteroposterior views, respectively. Intermethod analysis showed a systematic, quantitative bias between modalities (anteroposterior view: -4.1 mm, 6.7°; false-profile view: -0.1 mm, 8.3°), which will remain relatively consistent as evidenced by the strong individual reproducibility of each measurement., Conclusions: AIIS morphology in relation to the acetabular rim 12 o'clock position and its angle relative to the sagittal plane can be quantitatively determined using either radiographic or 3D CT imaging modalities., Clinical Relevance: Radiographic evaluation may be a valuable tool in the screening of AIIS impingement., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: To determine whether a 5-mm and/or 10-mm arthroscopic lateral acromioplasty (ALA) would weaken the structural and mechanical integrity of the lateral deltoid., Methods: The acromion and lateral deltoid origin were harvested from 15 pairs (n = 30) of fresh-frozen human cadaveric shoulder specimens. One side of each specimen pair (left or right) was randomly assigned to either a 5-mm (n = 7) or 10-mm (n = 8) ALA group, and the contralateral sides (n = 15) were used as matched controls. Acromion thickness and width were measured pre- and postoperatively. After ALA, specimens were inspected for damage to the lateral deltoid origin. Each specimen was secured within a dynamic testing machine, and the deltoid muscle was pulled to failure. Statistical analysis was performed to determine whether ALA reduced the lateral deltoid's failure load., Results: There was no significant difference in failure load between the 5-mm ALA group (661 ± 207 N) and its matched control group (744 ± 212 N; mean difference = 83 N; 95% confidence interval [CI], -91 to 258; P = .285) nor between the 10-mm ALA group (544 ± 210 N) and its matched control group (598 ± 157 N; mean difference = 54 N; 95% CI, -141 to 250; P = .532). There was no correlation found between the amount of bone resected (measured by percent thickness and width of the acromion after ALA) and the failure load of the deltoid. Visual evaluation of the acromion after ALA revealed the lateral deltoid origin had no damage in any case., Conclusions: ALA did not weaken the structural or mechanical integrity of the lateral deltoid origin. Neither a 5-mm nor a 10-mm ALA significantly reduced the deltoid's failure load. The lateral deltoid origin was not macroscopically damaged in any case., Clinical Relevance: ALA can be performed without the potential risk of macroscopically damaging the lateral deltoid origin or reducing its failure load., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: Knee dislocations often require multiple concurrent ligament reconstructions, which involve creating several tunnels in the distal femur. Therefore, the risk of tunnel convergence is increased because of the limited bone volume within the distal aspect of the femur., Purpose: To assess the risk of tunnel convergence and determine the optimal reconstruction tunnel orientations for multiple ligament reconstructions in the femur., Study Design: Descriptive laboratory study., Methods: Three-dimensional knee models were developed from computed tomography scans of 21 patients. Medical image processing software was used to create tunnels for each of the primary ligamentous structures, replicating a surgical approach that would be used in multiple ligament reconstructions. Thereafter, the tunnel orientation was varied in surgically relevant directions to determine orientations that minimized the risk of tunnel convergence. The orientation of the anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL) tunnels was held constant throughout the study, while the orientation of the fibular collateral ligament (FCL), popliteus tendon (PLT), superficial medial collateral ligament (sMCL), and posterior oblique ligament (POL) tunnels was varied to avoid convergence., Results: A high risk of tunnel convergence was observed between the FCL and ACL tunnels when the FCL tunnel was aimed at 0° in the axial and coronal planes. Aiming the FCL tunnel 35° anteriorly minimized convergence with the ACL tunnel. No tunnel convergence was observed for the PLT tunnel aimed 35° anteriorly and parallel to the FCL tunnel. To avoid convergence between the sMCL and PCL tunnels, the sMCL tunnels should be aimed 40° proximally in the coronal plane and 20° to 40° anteriorly. During concomitant POL reconstruction, the sMCL should be aimed 40° proximally and anteriorly and the POL 20° proximally and anteriorly. The PLT and POL tunnels aimed at 0° in both the coronal and axial planes had an increased risk of violating the intercondylar notch., Conclusion: Femoral tunnel orientations during multiple ligament reconstructions need to be adjusted to avoid tunnel convergence. On the lateral side, aiming the FCL and PLT tunnels 35° anteriorly eliminated convergence with the ACL tunnel. On the medial side, tunnel convergence was avoided by orienting the sMCL tunnel 40° proximally and anteriorly and the POL tunnel 20° proximally and anteriorly. The POL and PLT tunnels aimed at 0° in the axial plane had an increased risk of violating the intercondylar notch., Clinical Relevance: The risk of tunnel convergence with the ACL and PCL femoral tunnels can be reduced by adjusting the orientation of the FCL and PLT tunnels and the sMCL and POL tunnels, respectively.

Intrapartum cardiotocography (CTG) has a high false-positive rate. This has contributed to the rapid increase in obstetric interventions without a strong improvement in perinatal outcomes. We explore the role of ST analysis (STAN®) as an adjunct to CTG in identifying fetal asphyxia during labor. We conclude that STAN® reduces the rate of fetal blood sampling and instrumental vaginal deliveries, and has the potential to reduce the number of Australian operative interventions without compromising neonatal outcome.

Background: Historically, syndesmosis injuries have been repaired with screw fixation; however, some suggest that suture-button constructs may provide a more accurate anatomic and physiologic reduction. The purpose of this study was to compare changes in the volume of the syndesmotic space following screw or suture-button fixation using a preinjury and postoperative 3-D computed tomography (CT) model. The null hypothesis was that no difference would be observed among repair techniques., Methods: Twelve pairs of cadaveric specimens were dissected to identify the syndesmotic ligaments. Specimens were imaged with CT prior to the creation of a complete syndesmosis injury and were subsequently repaired using 1 of 3 randomly assigned techniques: (a) one 3.5-mm cortical screw, (b) 1 suture-button, and (c) 2 suture-buttons. Specimens were imaged postoperatively with CT. 3-D models of all scans and tibiofibular joint space volumes were calculated to assess restoration of the native syndesmosis. Analysis of variance and Tukey's method were used to compare least squares mean differences from the intact syndesmosis among repair techniques., Results: For each of the 3 fixation methods, the total postoperative syndesmosis volume was significantly decreased relative to the intact state. The total mean decreases in volume compared with the intact state for the 1-suture-button construct, 2-suture-button construct, and syndesmotic screw were -561 mm 3 (95% CI, -878 to -244), -964 mm 3 (95% CI, -1281 to -647) and -377 mm 3 (95% CI, -694 to -60), respectively., Conclusion: All repairs notably reduced the volume of the syndesmosis beyond the intact state. Fixation with 1 suture-button was not significantly different from screw or 2-suture-button fixation; however, fixation with 2 suture-buttons resulted in significantly decreased volume compared with screw fixation., Clinical Relevance: The results of this study suggest that the 1-suture-button repair technique and the screw fixation repair technique were comparable for reduction of syndesmosis injuries, although both may overcompress the syndesmosis.

Background: Significant debate exists regarding optimal repair for unstable syndesmosis injuries. Techniques range from screw fixation, suture-button fixation, or a combination of the two. In this study, 3 common repairs were compared using a simulated weightbearing protocol with internal and external rotation of the foot., Methods: Twenty-four lower leg specimens with mean age 54 years (range, 38-68 years) were used for testing. Following creation of a complete syndesmotic injury (AITFL, ITFL, PITFL, interosseous membrane), specimens were repaired using 1 of 3 randomly assigned techniques: (1) one 3.5-mm syndesmotic screw, (2) 1 suture-button construct, and (3) 2 divergent suture-button constructs. Repairs were cycled for 500 cycles between 7.5 Nm of internal/external rotation torque under a constant 750 N axial compressive load in a neutral dorsiflexion position. At 0, 10, 100, and 500 cycles, torsional cyclic loading was interrupted to assess torsional resistance to rotation within a physiologic range of motion (15 degrees external rotation to 10 degrees internal rotation). Torque (Nm), rotational position (degrees), and 3-dimensional data were collected throughout the testing to characterize relative spatial relationships of the tibiofibular articulation., Results: There were no significant differences between repair techniques in resistance to internal and external rotation with respect to the intact syndesmosis. Three-dimensional analysis revealed significant differences between repair techniques for sagittal fibular translation with external rotation of the foot. Screw fixation had the smallest magnitude of posterior sagittal translation (2.5 mm), and a single suture-button construct demonstrated the largest magnitude of posterior sagittal translation (4.6 mm). Screw fixation also allowed for significantly less anterior sagittal translation with internal rotation of the foot (0.1 mm) when compared to both 1 (2.7 mm) and 2 (2.9 mm) suture-button constructs., Conclusion: All repairs provided comparable rotational stability to the syndesmosis; however, no repair technique completely restored rotational stability and tibiofibular anatomic relationships of the preinjury state., Clinical Relevance: Constructs were comparable across most conditions; however, when repairing injuries with a suture-button construct, a single suture-button construct may not provide sufficient resistance to sagittal translation of the fibula.

Background: Hip capsulotomy is routinely performed during arthroscopic surgery to achieve adequate exposure of the joint. Iatrogenic instability can result after hip arthroscopic surgery because of capsular insufficiency, which can be avoided with effective closure of the hip capsule. There is currently no consensus in the literature regarding the optimal quantity of sutures upon capsular closure to achieve maximal stability postoperatively. Purpose/Hypothesis: The purpose of this study was to determine the failure torques of 1-, 2-, and 3-suture constructs for hip capsular closure to resist external rotation and extension after standard anterosuperior interportal capsulotomy (12 to 3 o'clock). Additionally, the degree of external rotation at which the suture constructs failed was recorded. The null hypothesis of this study was that no significant differences with respect to the failure torque would be found between the 3 repair constructs., Study Design: Controlled laboratory study., Methods: Nine pairs (n = 18) of fresh-frozen human cadaveric hemipelvises underwent anterosuperior interportal capsulotomy, which were repaired with 1, 2, or 3 side-to-side sutures. Each hip was secured in a dynamic biaxial testing machine and underwent a cyclic external rotation preconditioning protocol, followed by external rotation to failure., Results: The failure torque of the 1-suture hip capsular closure construct was significantly less than that of the 3-suture construct. The median failure torque for the 1-suture construct was 67.4 N·m (range, 47.4-73.6 N·m). The median failure torque was 85.7 N·m (range, 56.9-99.1 N·m) for the 2-suture construct and 91.7 N·m (range, 74.7-99.0 N·m) for the 3-suture construct. All 3 repair constructs exhibited a median 36° (range, 22°-64°) of external rotation at the failure torque., Conclusion: The most important finding of this study was that the 2- and 3-suture constructs resulted in comparable biomechanical failure torques when external rotation forces were applied to conventional hip capsulotomy in a cadaveric model. The 3-suture construct was significantly stronger than the 1-suture construct; however, there was not a significant difference between the 2- and 3-suture constructs. Additionally, all constructs failed at approximately 36° of external rotation., Clinical Relevance: Re-establishing the native anatomy of the hip capsule after hip arthroscopic surgery has been reported to result in improved outcomes and reduce the risk of iatrogenic instability. Therefore, adequate capsular closure is important to restore proper hip biomechanics, and postoperative precautions limiting external rotation should be utilized to protect the repair.

Purpose: In order to minimize viscoelastic elongation of ACL reconstruction grafts, preconditioning protocols have been employed in clinical practice prior to final graft fixation. The purpose of this study was to evaluate two separate high-load static preconditioning protocols of double-looped semitendinosus-gracilis grafts and compare these results to both a current clinical protocol and a control group with no preconditioning protocol applied. It was hypothesized that a high-load, static preconditioning protocol would minimize graft elongation during a simulated progressive early rehabilitation compared to both the "89 N" clinical protocol and control groups., Methods: Grafts were randomly allocated into four preconditioning study groups: (1) control (no preconditioning), (2) clinical protocol (89 N for 15 min), (3) high-load, short duration (600 N for 20 s), and (4) high-load, long duration (600 N for 15 min). After preconditioning, grafts were cyclically loaded between 10 and 400 N at 0.5 Hz for 450 cycles to simulate early postoperative rehabilitation. Graft displacement (elongation) was recorded during both preconditioning and cyclic loading., Results: Increased preconditioning load magnitude and duration significantly reduced graft elongation during cyclic loading (p < 0.05) which corresponded to an inverse relationship with increased elongation during preconditioning. The "600 N for 15 min" protocol resulted in significantly less elongation during simulated early rehabilitation than both the control group and the "89 N for 15 min" protocol (p < 0.001, p < 0.05)., Conclusions: Graft elongation during simulated early rehabilitation was significantly reduced by a high-load preconditioning protocol applied for an extended period of time compared to a current common clinical protocol and grafts that were not preconditioned. In addition, the amount of elongation during simulated early rehabilitation was similar between grafts preconditioned using the current clinical practice protocol and the high-load/short-duration protocol, implying that the latter could potentially induce the same viscoelastic changes in soft tissue grafts as the current clinical practice. The "600 N for 20 s" preconditioning protocol may provide similar postoperative results as the clinical protocol, "89 N for 15 min", and also reduce or maintain operative time. A high-load preconditioning protocol that reduces graft elongation may benefit patients undergoing ACL reconstruction, especially for cases of failed primary reconstruction, genu recurvatum, and increased tibial slope, where maintaining graft length is imperative to restore knee stability.

Background: Biomechanical data and contributions to ankle joint stability have been previously reported for the individual distal tibiofibular ligaments. These results have not yet been validated based on recent anatomic descriptions or using current biomechanical testing devices., Methods: Eight matched-pair, lower leg specimens were tested using a dynamic, biaxial testing machine. The proximal tibiofibular joint and the medial and lateral ankle ligaments were left intact. After fixation, specimens were preconditioned and then biomechanically tested following sequential cutting of the tibiofibular ligaments to assess the individual ligamentous contributions to syndesmotic stability. Matched paired specimens were randomly divided into 1 of 2 cutting sequences: (1) anterior-to-posterior: intact, anterior inferior tibiofibular ligament (AITFL), interosseous tibiofibular ligament (ITFL), deep posterior inferior tibiofibular ligament (PITFL), superficial PITFL, and complete interosseous membrane; (2) posterior-to-anterior: intact, superficial PITFL, deep PITFL, ITFL, AITFL, and complete interosseous membrane. While under a 750-N axial compressive load, the foot was rotated to 15 degrees of external rotation and 10 degrees of internal rotation for each sectioned state. Torque (Nm), rotational position (degrees), and 3-dimensional data were recorded continuously throughout testing., Results: Testing of the intact ankle syndesmosis under simulated physiologic conditions revealed 4.3 degrees of fibular rotation in the axial plane and 3.3 mm of fibular translation in the sagittal plane. Significant increases in fibular sagittal translation and axial rotation were observed after syndesmotic injury, particularly after sectioning of the AITFL and superficial PITFL. Sequential sectioning of the syndesmotic ligaments resulted in significant reductions in resistance to both internal and external rotation. Isolated injuries to the AITFL resulted in the most substantial reduction of resistance to external rotation (average of 24%). However, resistance to internal rotation was not significantly diminished until the majority of the syndesmotic structures had been sectioned., Conclusion: The ligaments of the syndesmosis provide significant contributions to rotary stability of the distal tibiofibular joint within the physiologic range of motion., Clinical Relevance: This study defined normal motion of the syndesmosis and the biomechanical consequences of injury. The degree of instability was increased with each additional injured structure; however, isolated injuries to the AITFL alone may lead to significant external rotary instability.

Purpose: To systematically review and compare biomechanical results of lateral extra-articular tenodesis (LET) procedures., Methods: A systematic review was performed using the PubMed, Medline, Embase, and Cochrane databases. The search terms included the following: extraarticular, anterolateral, iliotibial, tenodesis, plasty, augmentation, procedure, reconstruction, technique, biomechanics, kinematic, robot, cadaver, knee, lateral tenodesis, ACL, Marcacci, Lemaire, Losee, Macintosh, Ellison, Andrews, Hughston, and Muller. The inclusion criteria were nonanatomic, in vitro biomechanical studies, defined as in vitro investigations of joint motion resulting from controlled, applied forces., Results: Of the 10 included studies, 7 analyzed anterior tibial translation and reported that isolated LET procedures did not restore normal anterior stability to the anterior cruciate ligament (ACL)-deficient knee. Seven of the 8 studies analyzing tibial rotation reported a reduction in internal tibial rotation across various flexion angles in the ACL-deficient knee when compared with the native state. Five studies reported a reduction in intra-articular graft force with the addition of an LET. Two studies evaluated length change patterns, graft course, and total strain range and found that reconstruction techniques in which the graft attached proximal to the lateral epicondyle and coursed deep to the fibular collateral ligament were most isometric., Conclusions: In the ACL-deficient knee, LET procedures overconstrained the knee and restricted internal tibial rotation when compared with the native state. In addition, isolated LET procedures did not return normal anterior stability to the ACL-deficient knee but did significantly reduce anterior tibial translation and intra-articular graft forces during anteriorly directed loading., Clinical Relevance: Combined injury to the ACL and anterolateral structures has been reported to exhibit greater anterolateral rotatory instability when compared with isolated ACL injuries. Despite the reported risk of joint over-constraint, consideration should be given to reconstructing the anterolateral structures and the ACL concurrently to maximally restore both anterior tibial translation and rotatory stability., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: Anterior cruciate ligament (ACL) tears are one of the most common injuries among athletes. However, the ability to fully restore rotational stability with ACL reconstruction (ACLR) remains a challenge, as evidenced by the persistence of rotational instability in up to 25% of patients after surgery. Advocacy for reconstruction of the anterolateral ligament (ALL) is rapidly increasing because some biomechanical studies have reported that the ALL is a significant contributor to internal rotational stability of the knee., Hypothesis/purpose: The purpose of this study was to assess the effect of ALL reconstruction (ALLR) graft fixation angle on knee joint kinematics in the clinically relevant setting of a concomitant ACLR and to determine the optimal ALLR graft fixation angle. It was hypothesized that all fixation angles would significantly reduce rotational laxity compared with the sectioned ALL state., Study Design: Controlled laboratory study., Methods: Ten nonpaired fresh-frozen human cadaveric knees underwent a full kinematic assessment in each of the following states: (1) intact; (2) anatomic single-bundle (SB) ACLR with intact ALL; (3) anatomic SB ACLR with sectioned ALL; (4) anatomic SB ACLR with 7 anatomic ALLR states using graft fixation angles of 0°, 15°, 30°, 45°, 60°, 75°, and 90°; and (5) sectioned ACL and ALL. Internal rotation during a 5-N·m internal rotation torque and anterior translation during an 88-N anterior load were recorded at 15° flexion intervals between 0° and 120°. Axial plane translation and internal rotation during a simulated pivot-shift test (combined 5-N·m internal rotation and 10-N·m valgus torques) were recorded between 0° and 60°. Kinematic changes were measured and compared with the intact state for all reconstructed and sectioned states., Results: Anatomic ALLR at all graft fixation angles significantly overconstrained internal rotation of the knee joint beyond 30° of flexion and at 45° and 60° during the pivot-shift test. Furthermore, there were no significant knee kinematic differences between any tested graft fixation angles during anterior drawer, pivot-shift, and internal rotation tests., Conclusion: Anatomic ALLR in conjunction with an ACLR significantly reduced rotatory laxity of the knee beyond 30° of knee flexion. However, ALLR, regardless of fixation angle, resulted in significant overconstraint of the knee., Clinical Relevance: ALLR at any fixation angle overconstrained native joint kinematics and should be performed with careful consideration. Further investigation into the application and target population for ALLR is strongly recommended., (© 2016 The Author(s).)

Purpose: Pretensioning and preconditioning of soft tissue grafts are often performed to obviate graft stress relaxation and elongation due to viscoelastic graft properties following anterior cruciate ligament (ACL) reconstruction. It was hypothesized that a consensus could be identified in the current literature regarding the biomechanical effects and clinical benefits of an optimal protocol., Methods: A systematic electronic literature search was performed by two independent reviewers to identify relevant publications. Only studies describing and/or comparing pretensioning or preconditioning protocols of soft tissue grafts or equivalent animal research models were eligible for inclusion. Study design, graft type, and protocol, including method, magnitude, mode (cyclic and/or static loading), and duration of load application, were compared. Research results and clinical conclusions were also evaluated for each study., Results: Five studies, including four in vitro biomechanical investigations and one histological analysis of patient tissue, met the predefined criteria for inclusion. Studies described numerous pretensioning and/or preconditioning protocols with varying force, time, and application modalities for multiple soft tissue graft types and animal models. The majority of studies (80 %) utilized at least one pretensioning or preconditioning protocol between 80 and 89 N, while only one study investigated substantially higher loads (500 N)., Conclusions: Despite common trends demonstrating the effects of pretensioning and preconditioning, no clear consensus regarding an optimal protocol, magnitude, or modality could be identified within the currently available relevant literature. Further multidisciplinary research is required before an optimal or consensus protocol can be established for soft tissue ACL reconstruction. Regardless, the current biomechanical literature demonstrates the potential clinically beneficial effects of pretensioning and preconditioning, including reduced graft elongation and greater preservation of graft tension and stiffness following fixation., Level of Evidence: Systematic review, Level II.

Background: The optimal location and extent of medial clavicle resection for sternoclavicular (SC) joint resection arthroplasty are unknown., Hypothesis: Resection of the intra-articular disc alone cannot reliably decompress the SC joint, and a parallel resection technique will decompress the SC joint significantly more compared with the same amount with an oblique resection technique., Study Design: Controlled laboratory study., Methods: Force transmission through the SC joint was measured in 7 matched-pair human cadaveric SC joints in a dynamic tensile testing machine. The specimens were randomized to either a parallel or an oblique resection technique. An 80-N axial load was applied on the lateral clavicle toward the SC joint in each of the following 4 conditions: (1) intact joint, (2) after resecting the intra-articular disc, (3) after resecting 5 mm of the medial clavicle, and (4) after 10-mm resection., Results: Complete discectomy of all SC joints resulted in a significant reduction of force transmitted through the SC joint (P = .002). However, the varying anatomy of the disc was accompanied by a varying amount of joint decompression (95% CI, 29.8%-65.4%). Resecting 5 mm of the SC joint with the parallel technique decompressed the SC joint by a mean (±SD) of 76.7 ± 22.1 N compared with 37.8 ± 24.8 N with the oblique technique (P = .02). Decompression did not significantly differ between the groups after 10-mm resection (P = .18) using the parallel technique (89.4 ± 24.1 N) compared with the oblique technique (68.2 ± 31.6 N). Furthermore, 5-mm resection of the medial end of the clavicle with the parallel technique decompressed the SC joint by an amount similar to 10-mm resection with the oblique technique., Conclusion: Resection of the disc alone did not reliably decompress each SC joint. Resection of 5 mm of the medial end of the clavicle with the parallel resection technique reliably decompressed the SC joint better than with the oblique resection technique., Clinical Relevance: This study provides baseline data on SC joint resection techniques and their mechanical effects. This knowledge can be implemented in clinical practice to treat patients with symptomatic posttraumatic arthritis of the SC joint., (© 2016 The Author(s).)

Currently, open reduction-internal fixation using contoured plates or intramedullary nails is considered the standard operative treatment for midshaft clavicle fractures because of the immediate rigid stability provided by the fixation device. In addition, autologous iliac crest bone graft has proved to augment osteosynthesis during internal fixation of nonunion fractures through the release of osteogenic factors. The purpose of this article is to describe a surgical technique developed to reduce donor-site morbidity and improve functional and objective outcomes after open reduction-internal fixation with autologous bone graft placement through local autograft harvesting and concurrent plate fixation.

Purpose: The purpose of this study was to investigate the effect of lateral meniscal posterior root avulsions combined with intact meniscofemoral ligaments (MFLs), deficient MFLs, anterior cruciate ligament (ACL) tears and reconstructions, and root repairs using an established tibiofemoral contact mechanics testing protocol., Methods: Ten fresh-frozen cadaveric knees were tested with six knee conditions (1: intact; 2: lateral meniscal posterior root avulsion; 3: root avulsion and deficient MFLs; 4: condition 3 with ACL tear; 5: condition 4 with ACL reconstruction; 6: ACL reconstruction with root repair) at five flexion angles (0°, 30°, 45°, 60°, and 90°), under a 1000-N axial load. Contact area and pressure were measured with Tekscan sensors., Results: Compared to the intact state, condition 2 did not significantly change lateral compartment contact area or pressure. Changes in contact mechanics were greater at increased flexion angles; for condition 3 at 0° and 90°, contact area decreased 37 and 52 % [95 % CI (21-53) and (39-66), respectively] and mean contact pressure increased 55 and 87 % [95 % CI (33-76) and (59-114), respectively]. Root repair with ACL reconstruction was not significantly different from the intact state., Conclusions: The MFLs protect the lateral compartment from changes in contact mechanics in the setting of a lateral meniscal posterior root avulsion, whereas a combination of lateral meniscal root avulsion and deficient MFLs leads to significant changes. Concurrent ACL reconstruction and lateral meniscal root repair restore mean contact pressure and area to the intact state and are recommended in this combined injury to prevent or slow the development of lateral compartment arthritis.

Using robust, pairwise comparisons and a global dataset, we show that nitrogen concentration per unit leaf mass for nitrogen-fixing plants (N2FP; mainly legumes plus some actinorhizal species) in nonagricultural ecosystems is universally greater (43-100%) than that for other plants (OP). This difference is maintained across Koppen climate zones and growth forms and strongest in the wet tropics and within deciduous angiosperms. N2FP mostly show a similar advantage over OP in nitrogen per leaf area (Narea), even in arid climates, despite diazotrophy being sensitive to drought. We also show that, for most N2FP, carbon fixation by photosynthesis (Asat) and stomatal conductance (gs) are not related to Narea-in distinct challenge to current theories that place the leaf nitrogen-Asat relationship at the center of explanations of plant fitness and competitive ability. Among N2FP, only forbs displayed an Narea-gs relationship similar to that for OP, whereas intrinsic water use efficiency (WUEi; Asat/gs) was positively related to Narea for woody N2FP. Enhanced foliar nitrogen (relative to OP) contributes strongly to other evolutionarily advantageous attributes of legumes, such as seed nitrogen and herbivore defense. These alternate explanations of clear differences in leaf N between N2FP and OP have significant implications (e.g., for global models of carbon fluxes based on relationships between leaf N and Asat). Combined, greater WUE and leaf nitrogen-in a variety of forms-enhance fitness and survival of genomes of N2FP, particularly in arid and semiarid climates.

Purpose: To investigate if (1) an anterolateral acromioplasty and (2) a lateral acromion resection alter the critical shoulder angle (CSA) without affecting the deltoid origin., Methods: First, the native CSAs of 10 human cadaveric shoulders (6 male and 4 female specimens; mean age, 54.2 years) were determined with the use of fluoroscopy. Setup allowed for consistent repetitive measurements. Next, a standard arthroscopic anterolateral acromioplasty was performed to create a type 1 acromion, and the CSA was reassessed fluoroscopically. Afterward, a lateral acromioplasty was performed with a 5-mm lateral acromion resection using a 5-mm burr, and the CSA was measured again. The native CSA was compared with (1) the CSA after acromioplasty and (2) the CSA after acromioplasty and lateral acromion resection using a paired t test. Finally, the acromial deltoid attachment was evaluated anatomically for damage to the anterolateral origin., Results: The mean native CSA (34.3° ± 2.1°) was reduced significantly by acromioplasty (33.1° ± 2.0°, P < .001) and further reduced by lateral acromion resection (31.5° ± 1.7°, P < .001). Anterolateral acromioplasty reduced the CSA by a mean of 1.4° (95% confidence interval boundaries, 0.8° and 1.9°), and in combination with lateral acromion resection, the CSA was reduced by a mean of 2.8° (95% confidence interval boundaries, 2.1° and 3.5°). In all specimens (5 of 5) with a presurgery CSA of 35° or greater, the CSA was reduced to the range of 30° to 35° by the combination of both techniques. However, in 2 specimens with a CSA of approximately 32°, the CSA was reduced to less than 30°. The acromial deltoid attachment was found to be well preserved in all specimens., Conclusions: Arthroscopic anterolateral acromioplasty and a 5-mm lateral acromion resection each reduced the CSA significantly and did not damage the deltoid origin., Clinical Relevance: The combination of both techniques could potentially be used in clinical practice to reduce a CSA greater than 35° to the desired range of 30° to 35°., (Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: Complete radial tears of the medial meniscus have been reported to be functionally similar to a total meniscectomy. At present, there is no consensus on an ideal technique for repair of radial midbody tears of the medial meniscus. Prior attempts at repair with double horizontal mattress suture techniques have led to a reportedly high rate of incomplete healing or healing in a nonanatomic (gapped) position, which compromises the ability of the meniscus to withstand hoop stresses., Hypothesis: A newly proposed 2-tunnel radial meniscal repair method will result in decreased gapping and increased ultimate failure loads compared with the double horizontal mattress suture repair technique under cyclic loading., Study Design: Controlled laboratory study., Methods: Ten matched pairs of male human cadaveric knees (average age, 58.6 years; range, 48-66 years) were used. A complete radial medial meniscal tear was made at the junction of the posterior one-third and middle third of the meniscus. One knee underwent a horizontal mattress inside-out repair, while the contralateral knee underwent a radial meniscal repair entailing the same technique with a concurrent novel 2-tunnel repair. Specimens were potted and mounted on a universal testing machine. Each specimen was cyclically loaded 1000 times with loads between 5 and 20 N before experiencing a load to failure. Gap distances at the tear site and failure load were measured., Results: The 2-tunnel repairs exhibited a significantly stronger ultimate failure load (median, 196 N; range, 163-212 N) than did the double horizontal mattress suture repairs (median, 106 N; range, 63-229 N) (P = .004). In addition, the 2-tunnel repairs demonstrated decreased gapping at all testing states (P < .05) with a final measured gapping of 1.7 mm and 4.1 mm after 1000 cycles for the 2-tunnel and double horizontal mattress suture repairs, respectively., Conclusion: The 2-tunnel repairs displayed significantly less gapping distance after cyclic loading and had significantly stronger ultimate failure loads compared with the double horizontal mattress suture repairs., Clinical Relevance: Complete radial tears of the medial meniscus significantly decrease the ability of the meniscus to dissipate tibiofemoral loads, predisposing patients to early osteoarthritis. Improving the ability to repair medial meniscal radial tears in a way that withstands cyclic loads and heals in an anatomic position could significantly improve patient healing rates and result in improved preservation of the articular cartilage of the medial compartment of the knee. The 2-tunnel repair may be a more reliable and stronger repair option for midbody radial tears of the medial meniscus. Clinical studies are warranted to further evaluate these repairs., (© 2015 The Author(s).)

Purpose: No consensus exists regarding the optimal preconditioning protocol that will minimize postoperative elongation while creating a graft that is biomechanically equivalent to the native anterior cruciate ligament (ACL). It was hypothesized that a preconditioning protocol of specific mode and magnitude would create a graft with equivalent stiffness to the native ACL., Methods: Thirty-six bovine extensor tendon grafts were randomly allocated among six preconditioning groups (n = 6 per group) including three cyclic (10 cycles at 0.5 Hz between 10-80, 100-300, and 300-600 N) and three static loading protocols (20 s at 80, 300, and 600 N). Grafts were then cyclically loaded between 50 and 250 N at 0.5 Hz for 500 cycles to simulate an early rehabilitation protocol., Results: Cyclic 300-600 N and static 600 N loading protocols both demonstrated significantly less elongation during simulated rehabilitation when compared to lower, current clinical standard preconditioning levels of 10-80 N (-62% Δ) and 80 N (-69% Δ). The same high-load preconditioning protocols demonstrated statistical equivalence in stiffness when compared to the previously reported stiffness of the native ACL., Conclusions: In this experimental model, increased force applied to soft tissue grafts during preconditioning significantly decreased the subsequent elongation experienced during simulated early rehabilitation. A static load of 600 N removed the most graft elongation during preconditioning, had the least amount of cyclic displacement during simulated early rehabilitation, and was statistically equivalent to the native ACL stiffness. Implementation of high-load preconditioning of soft tissue grafts may help improve outcomes following ACL reconstruction by reducing residual knee laxity resulting from postoperative graft elongation and the intrinsic viscoelastic properties of the graft tissue while imparting biomechanical characteristics (e.g. stiffness) equivalent to the native ACL.