Search

Real-world data on the effectiveness of glecaprevir/pibrentasvir (GLE/PIB) for patients with HCV infection and compensated cirrhosis is limited, especially for the 8-week regimen and in an Asian population. This retrospective study enrolled 159 consecutive patients with HCV and compensated cirrhosis who were treated with GLE/PIB at a single center in Taiwan. Sustained virological response (SVR) and adverse events (AEs) were evaluated. Among the 159 patients, 91 and 68 were treated with GLE/PIB for 8 and 12 weeks, respectively. In the per protocol analysis, both the 8- and 12-week groups achieved 100% SVR (87/87 vs. 64/64); and in the evaluable population analysis, 95.6% (87/91) of the 8-week group and 94.1% (64/68) of the 12-week group achieved SVR. The most commonly reported AEs, which included pruritus (15.4% vs. 26.5%), abdominal discomfort (9.9% vs. 5.9%), and skin rash (5.5% vs. 5.9%), were mild for the 8- and 12-week groups. Two patients in the 8-week group exhibited total bilirubin elevation over three times the upper normal limit. One of these two patients discontinued GLE/PIB treatment after 2 weeks but still achieved SVR. Both 8- and 12-week GLE/PIB treatments are safe and effective for patients of Taiwanese ethnicity with HCV and compensated cirrhosis., Competing Interests: The authors have declared that no competing interests exist.

Clinical trials showed pangenotypic direct-acting antivirals' (DAAs) excellent efficacy and safety when treating hepatitis C virus (HCV). Two pangenotypic regimens were examined, glecaprevir/pibrentasvir (GLE/PIB) and sofosbuvir/velpatasvir (SOF/VEL), in a real-world Taiwanese setting, including all HCV patients treated with GLE/PIB or SOF/VEL from August 2018 to April 2020. The primary endpoint was sustained virologic response 12 weeks after treatment cessation (SVR12), including adverse events (AEs). A total of 1,356 HCV patients received pangenotypic DAA treatment during the study: 742 and 614 received GLE/PIB and SOF/VEL, respectively. The rates of SVR12 for GLE/PIB and SOF/VEL were 710/718 (98.9%) and 581/584 (99.5%), respectively, by per-protocol analysis, and 710/742 (95.7%) and 581/614 (94.6%), respectively, by evaluable population analysis. Eleven (GLE/PIB: 8, SOF/VEL: 3) did not achieve SVR12. The most common AEs for GLE/PIB and SOF/VEL were pruritus (17.4% vs. 2.9%), abdominal discomfort (5.8% vs. 4.4%), dizziness (4.2% vs. 2%), and malaise (3.1% vs. 2.9%). Laboratory abnormalities were uncommon; only < 1% exhibited elevated total bilirubin or aminotransferase levels with both regimens. Five drug discontinuations occurred due to AEs (bilirubin elevation: 3; dermatological issues: 2). Pangenotypic DAAs GLE/PIB and SOF/VEL are effective and well tolerated, achieving high SVR12 rates for patients with all HCV genotypes.

Bakground: The objective of this study is to investigate the prognostic values of median nerve strain and applied pressure measurement for the assessment of clinical recovery after carpal tunnel release., Methods: Forty-five wrists, from 45 idiopathic carpal tunnel syndrome patients who treated with open carpal tunnel release, were evaluated by ultrasound. Median nerve strain, pressure applied to the skin, and ratio of pressure-strain were measured at the proximal part of the carpal tunnel. In addition, distal latencies in the motor and sensory nerve conductions studies and cross-sectional area of median nerve were measured. The parameters were compared before and after the open carpal tunnel release. According to patient recovery, the receiver operating characteristic curves were generated to evaluate the prognostic values of the parameters. The areas under the receiver operating characteristic curves were compared among parameters., Results: There was a significant increase in the median nerve strain, and significant decreases in the pressure applied to the skin and ratio of pressure-strain after carpal tunnel release (P < 0.01). There were significant decreases in the distal latencies and the cross-sectional area after carpal tunnel release (P < 0.01). The areas under the curves were 0.689, 0.773, 0.811, 0.668, 0.637, and 0.562 for the pressure, strain, pressure-strain ratio, motor latency, sensory latency, and area, respectively., Conclusions: The results suggest that elasticity of the median nerve and pressure around the nerve recover quickly after carpal tunnel release. Pressure-strain ratio was the most reliable parameter to reflect clinical recovery. The measurement of strain and applied pressure can be useful indicators to evaluate effectiveness of the carpal tunnel release., Trial Registration: Registered as NCT04027998 at ClinicalTrials.gov. Retrospectively registered on July 22, 2019.

The purpose of this study was to evaluate the reliability of ultrasound assessment of the displacement-force relationships for distal radioulnar joint (DRUJ) stability. Non-dominant wrists of 10 healthy male subjects were evaluated by force-monitor ultrasonography. This apparatus was developed to apply cyclic compression to the wrist with pre-determined transducer displacement conditions in the range of 0.1-3.0 mm. The subject's wrist was placed on the table with the forearm in the pronated position. The transducer was placed on the dorsal surface of the distal radius and ulna, perpendicular to the long axis of the forearm. The center of the ulnar head was at the DRUJ level. The distance between the dorsal surface of the distal radius and the ulnar head was measured at an initial and a pressed-down position. Changes in radioulnar displacement, force to the wrist and the displacement/force ratio were evaluated. The measurements were performed independently by two raters. The intra-class correlation coefficients (ICCs) for the radioulnar displacement were 0.76, 0.68, and 0.93, in the 1.0, 2.0, and 3.0 mm transducer displacement conditions, respectively. The ICCs for the force to the wrist were 0.18, 0.67, and 0.34, in different transducer displacement conditions, respectively. The ICCs for the displacement/force ratios were 0.68, 0.67, and 0.97, in different transducer displacement conditions, respectively. The highest ICC for the radioulnar displacement and the displacement/force ratio was observed in the 3.0 mm displacement condition. This assessment of displacement-force relationships may be useful to quantify DRUJ stability. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2053-2060, 2019., (© 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

Background: To assess the usefulness of three-dimensional (3D) digital pre-operative planning, we compared the radiographic parameters of the distal radius from 3D planning and conventional planning after osteosynthesis of distal radius fractures. We hypothesized that the use of 3D digital planning may improve radiographic outcomes for reduction and decrease the risk of correction loss. Methods: Sixty wrists of 60 distal radius fracture patients were randomly divided into two groups according to the order of hospital visits. Thirty wrists were treated with 3D preoperative planning as the plan group. Another thirty wrists were treated with conventional preoperative planning as the control group. Both groups were treated with volar locking plates. In the plan group, 3D digital preoperative planning and a surgical simulation were performed in order to determine the reduction and placement of the implants in addition to the plate/screw size prior to surgery. In the control group, conventional preoperative planning was performed. Ulnar variance, volar tilt, and radial inclination were measured at one week, three and six months after surgery. Difference of the measurement of radiographic parameters between operated and healthy side wrists were compared between plan and control groups at one week after surgery. Loss of corrections for radiographic parameters were compared between plan and control groups. Results: The differences between the operated and healthy side wrists were significantly smaller in the plan group compared to the control group for the volar tilt and radial inclination (p < 0.05).The loss of corrections for ulnar variance and volar tilt were significantly smaller in the plan group compared to the control group at six months after surgery (p < 0.05). Conclusions: 3D preoperative planning offers better reduction accuracy and reduces correction loss in the osteosynthesis of distal radius fractures.

Background: Diagnosing distal radioulnar joint (DRUJ) instability remains a challenge as it relies on physical examination. To quantitatively assess DRUJ stability, a pressure-monitor ultrasound system was developed. The objective of this study was to evaluate the force-displacement relationship of DRUJ in normal subjects., Methods: Nine wrists of 9 asymptomatic volunteers were evaluated. The pressure-monitor ultrasound system was developed to apply pressure to the tissue with a pre-determined cycle and displacement of the transducer. Each subject was imaged sitting with the elbow flexed and forearm pronated. The dorsal surface of the distal radius and the center of the ulnar head were displayed at DRUJ level. The pressure toward palmar direction was applied to the distal ulna with different levels of transducer displacements, i.e., 1 mm, 2 mm, and 3 mm. The distance between the dorsal surface of the ulnar head and the dorsal surface of the distal radius was measured. The first measurement was performed at the initial position, and the second measurement was performed when the transducer pressed down the ulna to the degree that the ulnar head had shifted to the most palmar position. At the same time, the pressure to the transducer was measured. The changes of radioulnar distance (=the measurement at the most palmar position-the measurement at the initial position) and pressure, and pressure/distance ratio were compared among the different transducer displacements., Results: The pressure was significantly increased as the transducer displacement became larger (P < 0.01). The changes of radioulnar distance were smaller in the 1 mm displacement condition compared to the 2 and 3 mm displacement conditions (P < 0.05). The pressure/distance ratio was larger in the 1 mm displacement condition compared to the 2 and 3 mm displacement conditions (P < 0.05)., Conclusions: A method to assess DRUJ stability by measuring changes in radioulnar distance and force application was developed. It was found that the application of 2 mm displacement and 200 g force was the critical stress for the capsuloligamentous structures to start stabilizing DRUJ. This methodology and the indices may be clinically useful to investigate the mechanical properties of patients with DRUJ instability.

A three-dimensional (3D) digital preoperative planning system for the osteosynthesis of distal radius fractures was developed for clinical practice. To assess the usefulness of the 3D planning for osteosynthesis, we evaluated the reproducibility of the reduction shapes and selected implants in the patients with distal radius fractures. Twenty wrists of 20 distal radius fracture patients who underwent osteosynthesis using volar locking plates were evaluated. The 3D preoperative planning was performed prior to each surgery. Four surgeons conducted the surgeries. The surgeons performed the reduction and the placement of the plate while comparing images between the preoperative plan and fluoroscopy. Preoperative planning and postoperative reductions were compared by measuring volar tilt and radial inclination of the 3D images. Intra-class correlation coefficients (ICCs) of the volar tilt and radial inclination were evaluated. For the implant choices, the ICCs for the screw lengths between the preoperative plan and the actual choices were evaluated. The ICCs were 0.644 (p < 0.01) and 0.625 (p < 0.01) for the volar tilt and radial inclination in the 3D measurements, respectively. The planned size of plate was used in all of the patients. The ICC for the screw length between preoperative planning and actual choice was 0.860 (p < 0.01). Good reproducibility for the reduction shape and excellent reproducibility for the implant choices were achieved using 3D preoperative planning for distal radius fracture. Three-dimensional digital planning was useful to visualize the reduction process and choose a proper implant for distal radius fractures. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2646-2651, 2017., (© 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

Objectives: Characterization of the changes of ultrasound parameters after carpal tunnel release may be useful for clarifying the effectiveness or the recovery process of the carpal tunnel syndrome treatment. We evaluated strain and morphological changes of the median nerve before and after carpal tunnel release in carpal tunnel syndrome patients., Methods: Twenty-two wrists of 20 idiopathic carpal tunnel syndrome patients who underwent open carpal tunnel release were evaluated by ultrasound. Cross-sectional images of the median nerve were obtained at the proximal carpal tunnel. The cross-sectional area, perimeter, aspect ratio of the minimum enclosing rectangle, and strain of the median nerve were measured and compared before and after carpal tunnel release. According to the patient's recovery, the areas under the receiver operating characteristic curves (AUCs) were compared among the parameters., Results: After carpal tunnel release, the area and perimeter significantly decreased, and the strain significantly increased compared with before carpal tunnel release. There were no significant changes in the aspect ratio after carpal tunnel release. The AUCs were 0.663, 0.643, 0.543, and 0.731 for the area, perimeter, aspect ratio, and strain, respectively., Conclusions: Significant decreases in median nerve area and perimeter as well as significant increases in median nerve strain were observed after carpal tunnel release. The results of this study may be useful when considering how the median nerve recovers after carpal tunnel release., (© 2017 by the American Institute of Ultrasound in Medicine.)

The objective of this study was to evaluate the diagnostic utility of strain and applied-pressure measurements of the median nerve in carpal tunnel syndrome (CTS). Thirty-five wrists of 23 idiopathic CTS patients and 30 wrists of 15 normal patients were examined. Median nerve strain, pressure to the skin and the pressure/strain ratio were measured at the proximal carpal tunnel level. Parameters were compared between CTS patients and controls. The areas under the receiver operating characteristic curves (AUCs) were compared for the parameters. Median nerve strain was significantly lower in the patients than in the controls (p < 0.01). Pressure and pressure/strain ratio were significantly higher in the patients than in the controls (p < 0.05: pressure, p < 0.01: ratio). The AUCs were 0.926, 0.681 and 0.937 for strain, pressure and pressure/strain ratio, respectively. Pressure/strain ratio is useful for evaluating the condition of the median nerve with respect to the hardness of the surrounding structures in CTS., (Copyright © 2017 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Background: Forceful activities of the wrist were considered to be a risk factor for the epicondylitis. However, there are still conflicting evidence concerning work-relatedness of epicondylitis. The main problem is that there is little information about which forearm postures are capable of withstanding higher torque loads and the extent of the differences in the torques generated by different forearm postures. The objective of this study was to investigate the differences in wrist flexion and extension torques among different forearm positions in healthy subjects., Methods: Twenty wrists of 10 asymptomatic volunteers were evaluated. The apparatus to measure the wrist torque consisted of a handle with a force sensor and a table to place the forearm in different positions. The direction of the handle can change when measuring different forearm positions. The forearm of the examinee was secured to the table. The participants were asked to exert themselves in maximal isometric contraction for wrist flexion or extension, and to maintain it for 5 s. Each evaluation of the flexion and extension torque was conducted twice. Three forearm positions were evaluated: neutral, pronation, and supination. The intra-class correlation coefficients between first and second measurements were evaluated for the maximum torque. The maximum torques and flexion/extension ratio were compared among the positions. In addition, the agility and endurance for the wrist extension/flexion torques were compared among the positions., Results: The intra-class correlation coefficients between first and second measurements were 0.928 and 0.866 for the wrist flexion and extension measurements, respectively. The highest torques for the wrist flexion and extension were observed in the supination and pronation positions, respectively (P < 0.01). There was a higher extension/flexion ratio in the supination position compared to the other positions (P < 0.05). There was a superior agility for the wrist flexion in the supination position compared to the pronation position., Conclusions: The normal balance of the wrist flexion-extension torques in different forearm positions were characterized. This information might aid the provision of advice regarding the optimal positions for performing specific tasks and could help to elucidate the pathophysiology of epicondylitis.

To assess the biomechanical effect of carpal tunnel release (CTR), we evaluated the deformation and displacement patterns of the median nerve before and after CTR in carpal tunnel syndrome (CTS) patients. Sixteen wrists of 14 idiopathic CTS patients who had open CTR and 26 wrists of 13 asymptomatic volunteers were evaluated by ultrasound. Cross-sectional images of the carpal tunnel during motion from full finger extension to flexion were recorded. The area, perimeter, aspect ratio of a minimum enclosing rectangle, and circularity of the median nerve were measured in finger extension and flexion positions. Deformation indices, determined by the flexion-extension ratio for each parameter, were compared before and after CTR. After CTR, the deformation indices of perimeter and circularity became significantly larger and the aspect ratio became significantly smaller than those before CTR (p < 0.05). Those differences were more obvious when comparing the values between the patients before CTR and the controls. Since the deformation indices after CTR are similar to the patterns of normal subjects, the surrounding structures and environment of the median nerve may be normalized upon CTR. This may be a way to tell how the median nerves recover after CTR., (© 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)

The objective of this study was to detect differences in median nerve strain between patients with carpal tunnel syndrome and healthy controls using cyclic compression apparatus. Twenty-eight patients with idiopathic carpal tunnel syndrome and 30 normal patients were examined by ultrasound elastography. Median nerve strain, strain ratio of reference coupler and median nerve area and perimeter were measured. The areas under receiver operating characteristic curves were compared among the parameters. Median nerve strains of the patients were significantly smaller than those of the controls (p < 0.001). Strain ratios, areas and perimeters were significantly larger in the patients than in the controls (p < 0.001). The areas under curves were 0.963, 0.917, 0.759 and 0.706 for strain, strain ratio, area and perimeter, respectively. The median nerve strain had the highest area under the curve. The ultrasonic strain measurements of the median nerve provided by the cyclic compression apparatus were superior to morphologic assessment in diagnosing carpal tunnel syndrome., (Copyright © 2015 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)