Search

This study investigates the effectiveness of sludge in coagulation-flocculation treatment for suspended solids (SS) removal from landfill leachate using Tin (IV) chloride and Jatropha curcas seed (...

A tin(IV) chloride promoted (3 + 2) annulation of trans-2-aroyl-3-styrylcyclopropane-1,1-dicarboxylates with nitriles is reported. The transformation involves the Lewis acid assisted formation of 1,5-dipolar intermediates from the cyclopropane dicarboxylates and nitriles followed by cyclization. The reactions proceed in a highly diastereoselective manner and afford 5-vinyl-1-pyrroline derivatives in 60–88% yields.

Landfill leachate is highly polluted and generated as a result of water infiltration through solid waste produced domestically and industrially. This study investigated the applicability of the response surface methodology (RSM) to optimize the removal performances of chemical oxygen demand (COD), color, and suspended solids (SS) from landfill leachate by coagulation process using Tin tetrachloride pentahydrate. The leachate samples were collected from Alor Pongsu Landfill (APLS) in Perak, Malaysia. Before starting the experiments, general characterization was carried out for raw leachate samples to investigate their physical and chemical properties. The effects of the dosage and pH of SnCl4 on the removal performances were evaluated as well. An ideal experimental design was performed based on the central composite design (CCD) by RSM. In addition, this RSM was used to evaluate the effects of process variables and their interaction toward the attainment of their optimum conditions. The statistical design of the experiments and data analysis was resolved using the Design-Expert software. Further, the range of coagulant dosage and pH was selected based on a batch study which was conducted at 13000 mg/L to 17000 mg/L of SnCl4 and pH ranged from 6 to 10. The results showed that the optimum pH and dosage of SnCl4 were 7.17 and 15 g/L, respectively, where the maximum removal efficiency was 67.7% for COD and 100% for color and SS. The results were in agreement with the experimental data with a maximum removal efficiency of 67.84 %, 98.6 %, and 99.3%, for COD, color, and SS, respectively. Overall, this study verified that the RSM method was viable for optimizing the operational condition of the coagulation-flocculation process.

The authors are grateful to the Tunisian Ministry of High Education and Scientific Research and Technology for financial support of this research Bisphosphonates of the types X(P(O)(OEt)2)2 (X = CH2=C (1a), CNCH2CH (1b) and PhCH2NCH2CH (1c)) react with SnCl4 in anhydrous dichloromethane to produce the new tin(IV) adducts [SnCl4(1a)] (2a), [SnCl4(1b)] (2b) and [SnCl4(1c)] (2c) in 72-80% yields. These complexes were characterized using IR, multinuclear (1H, 13C, 31P, 119Sn) NMR spectroscopy, elemental analysis, and in one case by single crystal X-ray diffraction. The NMR data show that the bisphosphonate ligands are coordinated to the tin center in a bidentate fashion forming cis octahedral tin complexes. Furthermore, the X-ray structure of complex 2b reveals that the bisphosphonate ligand is coordinated in a bidentate manner to the metal center in a distorted octahedral arrangement with Sn-O-P bond angles in the range 135.95(16)–137.99(18)°. The P=O and Sn-O bond lengths of 1.495(3)-1.497(3) and 2.134(3)-2.146(2) Å, respectively are in the order expected for phosphonate tin(IV) complexes. The results are discussed and compared with closely related analogues. Postprint

A series of novel 1-(4-amino-6-methyl-1-aryl-1H-pyrazolo[3,4-b]pyridin-5-yl)-ethanones and 6-methyl-1-aryl-1H-pyrazolo[3,4-b]pyridin-4-amines were prepared by the annulation of 5-amino-1-aryl-1H-pyrazole-4-carbonitriles with acetylacetone in the presence of tin(IV) chloride. The results demonstrated that the ethanones are the precursors of second compounds.

Tin disulfide thin films were prepared with different molarities of tin species (MSn) at the optimized substrate temperature using the Nebulized Spray pyrolysis technique to obtain better crystallinity with mono phase thin films. The concentration of Tin IV chloride Penta hydrate precursor is varied from 0.05:0.4 to 0.25:0.4 (SnCl4.5H2O: thiourea) to achieve correct stoichiometry and to tune the concentration of Tin ions in the SnS2 thin films. These films were well adherent, uniform, and shiny. Lower concentrations of Tin yields highly textured SnS2 thin films with (001) crystallite orientation. On increasing the concentration, the multi-phases (SnS and Sn2S3) were found to be present along with SnS2 material. The platelet-like grains were observed from SEM analysis in these SnS2 films. Multiple interference effects were predominant in all these thin films in the wavelength region of 600–1100 nm. The direct optical band gap of tin disulfide thin films had decreased from 3.2 eV to 2.75 eV with an increase in MSn from 0.05 to 0.2 M, respectively, and further increased to 3.0 eV for 0.25 M concentration. Using Hall Effect measurement, the type of semiconductor is found to be of n-type. A minimum resistivity value of 2.19 × 103 Ω cm was obtained for the film grown at MSn = 0.2 M.

This paper investigates the third-order nonlinear optical properties of 4α-(4-tert-butylphenoxy) phthalocyaninato dichlorotin(IV) (α-SnOtBpPc) and 4β-(4-tert-butylphenoxy) phthalocyaninato dichlorotin(IV) (β-SnOtBpPc) in different organic solvents. The third-order susceptibilities of α-SnOtBpPc and β-SnOtBpPc are reported in different solvents, using Z-scan techniques with 10 ns laser pulses at 532 nm. Their nonlinear absorption coefficient and absorption cross sections were also determined. The molecular imaginary components of the second-order hyperpolarizability Im[γ] of α-SnOtBpPc and β-SnOtBpPc were found to be 2.60 × 10–31 and 2.94 × 10–31 esu (tetrahydrofuran), 2.12 × 10–31 and 2.54 × 10–31 esu (chloroform), 3.06 × 10–31 and 2.54 × 10–31 esu (dichloromethane), and 1.27 × 10–31 and 1.50 × 10–31 esu (toluene), respectively. This study found that substitution at the α position has an effect of lowering the two-photon (2PA) cross section value for α-SnOtBpPc compared to that for β-SnOtBpPc, with values...

The hydrothermal treatment of pentose-rich corncob under microwave irradiation was performed using SnCl4 as catalyst for furfural production in this study. The influences of the catalyst amount, reaction temperature and reaction time on the compositions of the hydrolysate and solid residue were discussed comparatively. The solid residue obtained was characterized by FTIR, XRD and SEM. The results showed that the cell wall structure of the treated corncob was destroyed to a certain extent under the function of catalysts during the treatment, and most of the hemicelluloses were released from the cell wall and entered the hydrolysate as hemicellulose-derived sugars, followed by the selective dehydration to furfural. When the temperature reached the preset value of 190 °C under microwave irradiation, the highest furfural yield of 9.0 wt% (based on the dry weight of corncob) was achieved from the one-step conversion of corncob under the microwave-assisted hydrothermal treatment with a 1 % amount of SnCl4 (based on the dry weight of corncob) and a solid-to-liquor ratio of 1:20.

A novel SnCl4-promoted tandem reaction toward multisubstituted indenes via a sequential C-O bond cleavage/Nazarov cyclization/nucleophilic addition reaction has been developed to afford a series of multisubstituted indenes with an all-carbon quaternary center in moderate to good yields.

Synopsis Total cross section for electron scattering from SnCl4 molecules has been measured for energies from 0.6 to 300 eV. Obtained results have been compared with total cross sections for electron scattering from other tetrachoride molecules: XCl4 where X=C, Si, Ge.

Leachate production from landfilling contributes crucial pollutants to the environment. This study examined the potential of tin (IV) chloride as coagulant that involved charge neutralization and sweep flocculation mechanisms. The negative charge of leachate is neutralized by adding tin (IV) chloride as cationic coagulant which resulted precipitation and swept most of the colloids and dissolved solids that entrapped in the settling as hydrous oxide floc. Parameters such as suspended solid (SS) content, color, and chemical oxygen demand (COD) were analyzed using standard jar test procedures. The best condition was observed at pH 8, with removal efficiencies of 75.99 %, 99.29 % and 98.36 % for COD, SS, and color, respectively. At optimum dosage, tin (IV) chloride successfully removed 98.40 % for color, 99.54 % for SS and 71.53 % for COD. These results indicated the satisfactory performance of tin (IV) chloride. Hence, tin (IV) chloride is a potential coagulant for the treatment of Alor Pongsu Landfill leachate.

The title compounds are partially condensed products of hydrolysed tri­methyl­tin chloride. In the two structures, short cationic tris­tannatoxanes (C9H29O2Sn3) are bridged by a diformatotri­methyl­tin anion or a chloride anion., The title compounds, [Sn3(CH3)9(OH)2(H2O)2][Sn(CH3)3(CHO2)2] (1) and [Sn3(CH3)9(OH)2]Cl·H2O (2), are partially condensed products of hydrolysed tri­methyl­tin chloride. In the structures of 1 and 2, short cationic tris­tannatoxanes (C9H29O2Sn3) are bridged by a diformatotri­methyl­tin anion or a chloride anion, respectively. Hydrogen bridges are present and supposedly stabilize these structures against further polymerization to the known polymeric tri­methyl­tin hydroxide. Especially noteworthy is that the formate present in this structure was formed from atmospheric CO2.

A novel SnCl4-promoted tandem reaction toward multisubstituted indenes via a sequential C-O bond cleavage/Nazarov cyclization/nucleophilic addition reaction has been developed to afford a series of multisubstituted indenes with an all-carbon quaternary center in moderate to good yields.

trans-2-Aryl-3-nitro-cyclopropane-1,1-dicarboxylates when reacted with nitriles in the presence of tin(IV) chloride afford 2,4,5-trisubstituted oxazoles in good to excellent yields. The reactions take place through in situ generation of aroylmethylidene malonates from the cyclopropanes, followed by conjugate addition of nitriles to the malonates to form nitrilium ion intermediates and subsequent cyclisation.