Search

Ag-induced crystallization and layer exchange (AgILE) in a stack of amorphous Si/Ag/quartz substrate has been investigated using optical microscopy, scanning electron microscopy, transmission electron microscopy (TEM), scanning TEM-high angle annular dark field (STEM-HAADF) imaging, and electron tomography, covering length scales from a few tens of micrometers to a few tens of nanometers. The size of Ag grains in the underlying as-deposited Ag film varied from ∼10 to 500 nm. The following processes could be discerned using in situ heating of plan-view samples at 500 °C in STEM: (i) AgILE propagation preferentially along regions of small Ag grains, (ii) formation of pushed-up Ag in the vicinity of AgILE reaction cells, (iii) migration and agglomeration of pushed-up Ag on small and large Ag grains, which tend to inhibit AgILE and promote dendricity, and (iv) dispersion of pushed-up Ag, which tend to reduce dendricity. The resulting dendricity was largely confined to the peripheral regions of the impinging reaction cells and decreased with annealing time. In contrast, dendricity due to AgILE and crystallization at 550 °C is stable and extends right from the center to the periphery of the reaction cells. The microscopic mechanism of AgILE and, in particular, the effect of annealing temperature is investigated. The results are discussed in the light of existing literature and compared with Al-induced layer exchange. Annealing at temperature equal to or slightly less than 500 °C is found to be necessary in the case of AgILE to avoid dendricity and to obtain a continuous Si layer with large Si grains. [ABSTRACT FROM AUTHOR]

The roles of hydrogen impurity and oxygen vacancy defects on defining the conductivity, and hence photoelectrochemical (PEC) performance characteristics, of monoclinic scheelite bismuth vanadate (BiVO4) are investigated using a combination of experiment and theory. We find that elemental hydrogen is present as an impurity in as-synthesized BiVO4 and that increasing its concentration by annealing in H2 at temperatures up to 290 °C leads to near-complete elimination of majority carrier transport limitations, a beneficial shift in the photoanodic current onset potential, and improved fill factor. Magnetic resonance measurements reveal that hydrogen can be incorporated in at least two different chemical environments, which are assigned to interstitial and substitutional sites. Incorporation of hydrogen leads to a shift of the Fermi level toward the conduction band edge, indicating that n-type character is correlated with increased hydrogen content. This finding is in agreement with theory and reveals that hydrogen acts as a donor in BiVO4. Sub-bandgap photoluminescence is observed from as-synthesized material and is consistent with deep electronic states associated with oxygen vacancies. Hydrogen treatment leads to reduced emission from these states. These findings support the conclusion that hydrogen, rather than oxygen vacancies, is dominant in determining the n-type conductivity of BiVO4. These findings have important implications for controlling the electronic properties and functional characteristics of this promising photoanode material.

β-Ga2O3 thin films were grown on the substrates of sapphire, GaN, and single crystals of β-Ga2O3, using plasma-assisted molecular beam epitaxy. By varying deposition conditions, pure-phase epitaxial β-Ga2O3 thin films were obtained, and the crystal quality of the as-grown films was optimized. A systematic characterization and a detailed analysis were performed on the films, including the nucleation process, surface morphology, crystal quality, thermal stability, as well as electrical and optical properties. Optical absorption was investigated using photothermal deflection spectroscopy, which provides detailed information about sub-gap optical absorption. Photocurrent measurements indicated a pronounced persistent photo-conductivity of β-Ga2O3. A blue-UV emission with an energy of 3–3.5 eV was observed by cathodoluminescence spectroscopy. The Fermi level position of the as-grown film was determined based on temperature-dependent electrical conductivity measurements. It is proposed that oxygen vacancies in the film form a defect band at around E c -0.8 eV that pins the Fermi level and is related to the observed photocurrent and cathodoluminescence characteristics. [ABSTRACT FROM AUTHOR]

Semiconducting ternary nitrides are a promising class of materials that have received increasing attention in recent years, but often show high free electron concentrations due to the low defect formation energies of nitrogen vacancies and substitutional oxygen, leading to degenerate n-type doping. To achieve non-degenerate behavior, we now investigate a family of amorphous calcium-zinc nitride (Ca-Zn-N) thin films. By adjusting the metal cation ratios, we demonstrate band gap tunability between 1.4 and 2.0 eV and control over the charge carrier concentration across six orders of magnitude, all while maintaining high mobilities between 5 and 70 cm 2 V -1 s -1 . The combination of favorable electronic properties, low synthesis temperatures, and earth-abundant elements makes amorphous Ca-Zn-N highly promising for future sustainable electronics. Moreover, the successful synthesis of such materials, as well as their broad optical and electrical tunability, paves the way for a new class of tailored functional materials: amorphous nitride semiconductors - ANSs.

Attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) is a powerful method for probing interfacial chemical processes. However, SEIRAS-active nanostructured metallic thin films for the in situ analysis of electrochemical phenomena are often unstable under biased aqueous conditions. In this work, we present a surface-enhancing structure based on etched black Si internal reflection elements with Au-coatings for in situ electrochemical ATR-SEIRAS. Using electrochemical potential-dependent adsorption and desorption of 4-methoxypyridine on Au, we demonstrate that black Si-based substrates offer advantages over commonly used structures, such as electroless-deposited Au on Si and electrodeposited Au on ITO-coated Si, due to the combination of high stability, sensitivity, and conductivity. These characteristics are especially valuable for time-resolved measurements where stable substrates are required over extended times. Furthermore, the low sheet resistance of Au layers on black Si reduces the RC time constant of the electrochemical cell, enabling a significantly higher time resolution compared to that of traditional substrates. Thus, we employ black Si-based substrates in conjunction with rapid- and step-scan Fourier transform infrared (FTIR) spectroscopy to investigate the adsorption and desorption kinetics of 4-methoxypyridine during in situ electrochemical potential steps. Adsorption is shown to be diffusion-limited, which allows for the determination of the mean molecular area in a fully established monolayer. Moreover, no significant changes in the peak ratios of vibrational modes with different orientations relative to the molecular axis are observed, suggesting a single adsorption mode and no alteration of the average molecular orientation during the adsorption process. Overall, this study highlights the enhanced performance of black Si-based substrates for both steady-state and time-resolved in situ electrochemical ATR-SEIRAS, providing a powerful platform for kinetic and mechanistic investigations of electrochemical interfaces.

We demonstrate the epitaxial coating of GaN NWs with an epitaxial ZnO shell by atomic layer deposition at 300 °C. Scanning transmission electron microscopy proves a sharp and defect-free coherent interface. The strain in the core-shell structure due to the lattice mismatch and different thermal expansion coefficients of GaN and ZnO was analyzed using 4D-STEM strain mapping and Raman spectroscopy and compared to theoretical calculations. The results highlight the outstanding advantages of epitaxial shell growth using atomic layer deposition, e.g., conformal coating and precise thickness control.

The combination of molecular catalysts and semiconductor substrates in hybrid heterogeneous photo- or electrocatalytic devices could yield synergistic effects that result in enhanced activity and long-term stability. The extent of synergy strongly depends on the electronic interactions and energy level alignment between the molecular states and the valence and conduction band of the substrate. These properties of hybrid interfaces are investigated for a model system composed of protoporphyrin IX (PPIX) as a stand-in for molecular catalysts and a variety of semiconductor substrates. Monolayers of PPIX are deposited using Langmuir-Blodgett deposition. Their morphology is studied in dependence of the deposition surface pressure to achieve a high-quality, dense coverage. By making use of ultraviolet-visible spectroscopy and ultraviolet photoelectron spectroscopy, the band alignment is determined by the vacuum level and incorporates an interface dipole of 0.4 eV independent of the substrate. The HOMO, LUMO, and LUMO+1 levels were determined to be at 5.6, 3.7, and 2.7 eV below the vacuum level, respectively. The quenching of PPIX photoluminescence in dependence of the potential gradient between excited state and electron affinity of the semiconductor substrates is overall in good agreement with electron transfer processes occurring at very fast time scales on the order of femtoseconds. Nevertheless, deviations from this model become apparent for narrower band gap semiconductors, which points to an additional relevance of other processes, such as energy transfer. These findings highlight the importance of matching the semiconductor to the molecular catalyst to prevent undesirable deactivation pathways.

Nanostructures exhibit a large surface-to-volume ratio, which makes them sensitive to their ambient conditions. In particular, GaN nanowires and nanofins react to their environment as adsorbates influence their (opto-) electronic properties. Charge transfer between the semiconductor surface and adsorbed species changes the surface band bending of the nanostructures, and the adsorbates can alter the rate of non-radiative recombination in GaN. Despite the importance of these interactions with the ambient environment, the detailed adsorption mechanisms are still not fully understood. In this article, we present a systematic study concerning the environmental sensitivity of the electrical conductivity of GaN nanofins. We identify oxygen- and water-based adsorbates to be responsible for a quenching of the electrical current through GaN nanofins due to an increased surface band bending. Complementary contact potential difference measurements in controlled atmospheres on bulk m - and c -plane GaN reveal additional complexity with regard to water adsorption, for which surface dipoles might play an important role besides an increased surface depletion width. The sensitive reaction of the electrical parameters to the environment and surface condition underlines the necessity of a reproducible pre-treatment and/or surface passivation. The presented results help to further understand the complex adsorption mechanisms at GaN surfaces. Due to the sensitivity of the nanofin conductivity on the environment, such structures could perform well as sensing devices., (Creative Commons Attribution license.)

Hybrid inorganic/organic heterointerfaces are promising systems for next-generation photocatalytic, photovoltaic, and chemical-sensing applications. Their performance relies strongly on the development of robust and reliable surface passivation and functionalization protocols with (sub)molecular control. The structure, stability, and chemistry of the semiconductor surface determine the functionality of the hybrid assembly. Generally, these modification schemes have to be laboriously developed to satisfy the specific chemical demands of the semiconductor surface. The implementation of a chemically independent, yet highly selective, standardized surface functionalization scheme, compatible with nanoelectronic device fabrication, is of utmost technological relevance. Here, we introduce a modular surface assembly (MSA) approach that allows the covalent anchoring of molecular transition-metal complexes with sub-nanometer precision on any solid material by combining atomic layer deposition (ALD) and selectively self-assembled monolayers of phosphonic acids. ALD, as an essential tool in semiconductor device fabrication, is used to grow conformal aluminum oxide activation coatings, down to sub-nanometer thicknesses, on silicon surfaces to enable a selective step-by-step layer assembly of rhenium(I) bipyridine tricarbonyl molecular complexes. The modular surface assembly of molecular complexes generates precisely structured spatial ensembles with strong intermolecular vibrational and electronic coupling, as demonstrated by infrared spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy analysis. The structure of the MSA can be chosen to avoid electronic interactions with the semiconductor substrate to exclusively investigate the electronic interactions between the surface-immobilized molecular complexes.

Due to their intrinsically large surface-to-volume ratio, nanowires and nanofins interact strongly with their environment. We investigate the role of the main air constituents nitrogen, oxygen and water on the efficiency of radiative recombination in GaN nanostructures as a function of different surface treatments and at temperatures up to 200 °C. Oxygen and water exposures exhibit a complex behavior as they can both act quenching and enhancing on the photoluminescence intensity dependent on the temperature. For oxygen, these characteristics are already observed for low concentrations of below 0.5% in nitrogen. While the photoluminescence intensity changes induced by oxygen occur independently of illumination, the influence of water is light-induced: it evolves within tens of seconds under ultraviolet light exposure and is heavily influenced by the nanostructure pre-treatment. In contrast to observations in dry atmospheres, water prevents a recovery of the photoluminescence intensity in the dark. Combined measurements of the electrical current through GaN nanofins and their photoluminescence intensity reveal the environmental influence on the interaction of non-radiative recombination processes and changes in the surface band bending of the nanostructures. Several investigated solvents show an enhancing effect on the PL intensity increase, peaking in c-hexane with a 26-fold increase after 6 min of light exposure. Stabilization of the PL intensity was achieved by a passivation of the GaN surface with Ga x O y , and ZnO shells. Surprisingly, Al 2 O 3 coatings resulted in a highly instable PL intensity during the first minutes of illumination. Our findings reveal the high importance of controlled environmental conditions for the investigation of nanostructures, especially when aimed at their applications in the fields of environmental sensing, photo-catalysis and light-emitting diodes., (Creative Commons Attribution license.)

GaN-on-diamond is a promising route towards reliable high-power transistor devices with outstanding performances due to better heat management, replacing common GaN-on-SiC technologies. Nevertheless, the implementation of GaN-on-diamond remains challenging. In this work, the selective area growth of GaN nanostructures on cost-efficient, large-scale available heteroepitaxial diamond (001) substrates by means of plasma-assisted molecular beam epitaxy is investigated. Additionally, we discuss the influence of an AlN buffer on the morphology of the GaN nanostructures. The nanowires and nanofins are characterized by a very high selectivity and controllable dimensions. Low temperature photoluminescence measurements are used to evaluate their structural quality. The growth of two GaN crystal domains, which are in-plane rotated against each other by 30°, is observed. The favoring of a certain domain is determined by the off-cut direction of the diamond substrates. By X-ray diffraction we show that the GaN nanostructures grow perpendicular to the diamond surface on off-cut diamond (001) substrates, which is in contrast to the growth on diamond (111), where the nanostructures are aligned with the substrate lattice. Polarity-selective wet chemical etching and Kelvin probe force microscopy reveal that the GaN nanostructures grow solely in the Ga-polar direction. This is a major advantage compared to the growth on diamond (111) and enables the application of GaN nanostructures on cost-efficient diamond for high-power/high-frequency applications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Magnetic anisotropy critically determines the utility of magnetic nanocrystals (NCs) in new nanomagnetism technologies. Using angular-dependent electron magnetic resonance (EMR), we observe magnetic anisotropy in isotropically arranged NCs of a nonmagnetic material. We show that the shape of the EMR angular variation can be well described by a simple model that considers magnetic dipole-dipole interactions between dipoles randomly located in the NCs, most likely due to surface dangling bonds. The magnetic anisotropy results from the fact that the energy term arising from the magnetic dipole-dipole interactions between all magnetic moments in the system is dominated by only a few dipole pairs, which always have an anisotropic geometric arrangement. Our work shows that magnetic anisotropy may be a general feature of NC systems containing randomly distributed magnetic dipoles., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Nanowire (NW) based devices for solar driven artificial photosynthesis have gained increasing interest in recent years due to the intrinsically high surface to volume ratio and the excellent achievable crystal qualities. However, catalytically active surfaces often suffer from insufficient stability under operational conditions. To gain a fundamental understanding of the underlying processes, the photochemical etching behavior of hexagonal and round GaN NWs in deionized water under illumination are investigated. We find that the crystallographic c-plane remains stable, whereas the m-planes are photochemically etched with rates up to 11 nm min-1, depending on the applied UV light intensity. By investigating nanowalls, we achieve control of the exposed crystallographic facets and find an enhanced stability of the a-plane compared to the m-plane. Photo-excited holes, which drift to the side facets due to the upward surface band bending in nominally n-type (not intentionally doped) GaN, are identified as the driving force of the process, which allows the development of concepts for the stabilization of the nanostructures. A geometrically enhanced absorption of periodic NW arrays is correlated with a dependence of the etch rate on the NW pitch and diameter. Further, we find selective photochemical etching of the NW base in the presence of sub-band gap illumination, which is attributed to defect-related absorption in this region. These results provide improved understanding of the roles of inhomogeneous defect distribution, light excitation profiles, and different surface facets on the photochemical stability of nanostructures and provide viable strategies for improving stabilities under light-driven reaction conditions.

We extend the infrared thermography of thin materials for measurements of the full time response to homogeneous heating via illumination. We demonstrate that the thermal conductivity, the heat capacity, as well as the thermal diffusivity can be determined comparing the experimental data to finite difference simulations using a variety of test materials such as thin doped and undoped silicon wafers, sheets of steel, as well as gold and polymer films. We show how radiative cooling during calibration and measurement can be accounted for and that the effective emissivity of the material investigated can also be measured by the setup developed.

In this work, the selective area growth of GaN nanowalls and nanogrids on sapphire and GaN on sapphire by molecular beam epitaxy is investigated. We demonstrate the fabrication of homogeneous GaN nanowall arrays with different widths, distances and specific crystallographic side facets. Photoluminescence spectroscopy of as-grown GaN nanowalls reveals a high crystal quality and low defect density. Moreover, a distinct dependence of the nanowall width and the intensity of the donor-bound exciton emission on the crystal orientation of the sidewall facets is found and explained by different surface states for a-plane and m-plane GaN. The waveguide character of the GaN nanowalls, given by the large refractive index of GaN and the subwavelength size of the structures, is analysed by experimental transmission measurements and numerical simulations. Our results and the high epitaxial control achieved by selective area growth show the potential of tailor-made nanowall-based devices, e.g., in photocatalysis or nanofluidics.

Label-free detection of charged biomolecules, such as DNA, has experienced an increase in research activity in recent years, mainly to obviate the need for elaborate and expensive pretreatments for labeling target biomolecules. A promising label-free approach is based on the detection of changes in the electrical surface potential on biofunctionalized silicon field-effect devices. These devices require a reliable and selective immobilization of charged biomolecules on the device surface. In this work, self-assembled monolayers of phosphonic acids are used to prepare organic interfaces with a high density of peptide nucleic acid (PNA) bioreceptors, which are a synthetic analogue to DNA, covalently bound either in a multidentate ( ∥ PNA) or monodentate ( ⊥ PNA) fashion to the underlying silicon native oxide surface. The impact of the PNA bioreceptor orientation on the sensing platform's surface properties is characterized in detail by water contact angle measurements, atomic force microscopy, X-ray photoelectron spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Our results suggest that the multidentate binding of the bioreceptor via attachment groups at the γ-points along the PNA backbone leads to the formation of an extended, protruding, and netlike three-dimensional metastructure. Typical "mesh" sizes are on the order of 8 ± 2.5 nm in diameter, with no preferential spatial orientation relative to the underlying surface. Contrarily, the monodentate binding provides a spatially more oriented metastructure comprising cylindrical features, of a typical size of 62 ± 23 × 12 ± 2 nm 2 . Additional cyclic voltammetry measurements in a redox buffer solution containing a small and highly mobile Ru-based complex reveal strikingly different insulating properties (ion diffusion kinetics) of these two PNA systems. Investigation by electrochemical impedance spectroscopy confirms that the binding mode has a significant impact on the electrochemical properties of the functional PNA layers represented by detectable changes of the conductance and capacitance of the underlying silicon substrate in the range of 30-50% depending on the surface organization of the bioreceptors in different bias potential regimes.

As the conduction band edge of rutile is close to the reduction potential of hydrogen, there is a long-lasting discussion on whether molecular hydrogen can be evolved from this semiconductor. Our study on methanol photoreforming in the ultra-high vacuum reveals that photocatalysts comprising a TiO2(110) single crystal decorated with platinum clusters indeed enable the evolution of H2. This is attributed to a new type of mechanism, in which the co-catalyst acts as a recombination center for hydrogen and not as a reduction site of a photoreaction. This mechanism is an alternative pathway to the commonly used mechanism derived from photoelectrochemistry and must particularly be considered for systems, in which reducible semiconductors enable the surface diffusion of hydrogen species.

Solid-state quantum emitters embedded in a semiconductor crystal environment are potentially scalable platforms for quantum optical networks operated at room temperature. Prominent representatives are nitrogen-vacancy (NV) centers in diamond showing coherent entanglement and interference with each other. However, these emitters suffer from inefficient optical outcoupling from the diamond and from fluctuations of their charge state. Here, we demonstrate the implementation of regular n-type gallium nitride nanowire arrays on diamond as photonic waveguides to tailor the emission direction of surface-near NV centers and to electrically control their charge state in a p-i-n nanodiode. We show that the electrical excitation of single NV centers in such a diode can efficiently replace optical pumping. By the engineering of the array parameters, we find an optical read-out efficiency enhanced by a factor of 10 and predict a lateral NV-NV coupling 3 orders of magnitude stronger through evanescently coupled nanowire antennas compared to planar diamond not covered by nanowires, which opens up new possibilities for large-scale on-chip quantum-computing applications.

Supercapacitors are called to play a prominent role in the newly emerging markets of electric vehicles, flexible displays and sensors, and wearable electronics. In order to compete with current battery technology, supercapacitors have to be designed with highly conductive current collectors exhibiting high surface area per unit volume and uniformly coated with pseudocapacitive materials, which is crucial to boost the energy density while maintaining a high power density. Here, we present a versatile technique to prepare thickness-controlled thin-film micro graphene foams (μGFs) with pores in the lower micrometer range grown by chemical vapor deposition which can be used as highly conductive current collectors in flexible supercapacitors. To fabricate the μGF, we use porous metallic catalytic substrates consisting of nickel/copper alloy synthesized on nickel foil by electrodeposition in an electrolytic solution. Changing the duration of the electrodeposition allows the control of the thickness of the metal foam, and thus of the μGF, ranging from a few micrometers to the millimeter scale. The resulting μGF with a thickness and pores in the micrometer regime exhibits high structural quality which leads to a very low intrinsic resistance of the devices. Transferred onto flexible substrates, we demonstrate a uniform coating of the μGFs with manganese oxide, a pseudocapacitively active material. Considering the porous structure and the thickness of the μGFs, square wave potential pulses are used to ensure uniform coverage by the oxide material boosting the volumetric and areal capacitance to 14 F cm -3 and 0.16 F cm -2 . The μGF with a thickness and pores in the micrometer regime in combination with a coating technique tuned to the porosity of the μGF is of great relevance for the development of supercapacitors based on state-of-the-art graphene foams.

The exploitation of semiconductor nanocrystal (NC) films in novel electronic and optoelectronic applications requires a better understanding of charge transport in these systems. Here, we develop a model of charge transport in NC films, based on a generalization of the concept of transport energy level ET to nanocrystal assemblies, which considers both intra- and inter-NC charge transfer processes. We conclude that the role played by each of these processes can be probed from temperature-dependent measurements of charge carrier density n and mobility μ in the same films. The model also enables the determination of the position of the Fermi energy level EF with respect to ET, an important parameter of charge transport in semiconductor materials, from the temperature dependence of n. Moreover, we provide support to an essentially temperature-independent intra-NC charge carrier mobility, considered in the transport level concept, and consequently the frequently observed temperature dependence of the overall mobility μ in NC films results from a temperature variation of the inter-NC charge transport processes. Importantly, we also conclude that the temperature dependence of conductivity in NC films should result in general from a combination of temperature variations of both n and μ. By applying the model to solution-processed Si NC films, we conclude that transport within each NC is similar to that in amorphous Si (a-Si), with charges hopping along band tail states located below the conduction band edge. For Si NCs, we obtain values of ET - EF of ∼0.25 eV. The overall mobility μ in Si NC films is significantly further reduced with respect to that typically found in a-Si due to the additional transport constraints imposed by inter-NC transfer processes inherent to a nanoparticulate film. Our model accounting for inter- and intra-NC charge transport processes provides a simple and more general description of charge transport that can be broadly applied to films of semiconductor NCs.

Colloidal dodecene-passivated silicon (Si) nanocrystals were dispersed in hexane or chloroform and deposited onto substrates as face-centered cubic superlattices by slowly evaporating the solvent. The uniformity of the nanocrystals enables extended order; however, the solvent and the evaporation protocol significantly influence the self-assembly process, determining the morphology of the films, the extent of order, and the superlattice orientation on the substrate. Chloroform yielded superlattices with step-flow growth morphologies and (111) SL , (100) SL , and (110) SL orientations. Hexane led to mostly island morphologies when evaporated at room temperature with exclusively (111) SL orientations. Higher evaporation temperatures led to more extensive step-flow deposition. A model for the surface diffusion of nanocrystals adsorbed on the superlattice surface is developed.

In this work, ethanol is used as a chemical probe to study the passivation of molecular beam epitaxy-grown GaN(0001) by surface oxidation. With a high degree of oxidation, no reaction from ethanol to acetaldehyde in temperature-programmed desorption experiments is observed. The acetaldehyde formation is attributed to a mechanism based on α-H abstraction from the dissociatively bound alcohol molecule. The reactivity is related to negatively charged surface states, which are removed upon oxidation of the GaN(0001) surface. This is compared with the Ga 2 O 3 (2¯01) single crystal surface, which is found to be inert for the acetaldehyde production. These results offer a toolbox to explore the surface chemistry of nitrides and oxynitrides on an atomic scale and relate their intrinsic activity to systems under ambient atmosphere.

Group III-nitride materials such as GaN nanowires are characterized by a spontaneous polarization within the crystal. The sign of the resulting sheet charge at the top and bottom facet of a GaN nanowire is determined by the orientation of the wurtzite bilayer of the different atomic species, called N and Ga polarity. We investigate the polarity distribution of heteroepitaxial GaN nanowires on different substrates and demonstrate polarity control of GaN nanowires on diamond. Kelvin Probe Force Microscopy is used to determine the polarity of individual selective area-grown and self-assembled nanowires over a large scale. At standard growth conditions, mixed polarity occurs for selective GaN nanowires on various substrates, namely on silicon, on sapphire and on diamond. To obtain control over the growth orientation on diamond, the substrate surface is modified by nitrogen and oxygen plasma exposure prior to growth, and the growth parameters are adjusted simultaneously. We find that the surface chemistry and the substrate temperature are the decisive factors for obtaining control of up to 93% for both polarity types, whereas the growth mode, namely selective area or self-assembled growth, does not influence the polarity distribution significantly. The experimental results are discussed by a model based on the interfacial bonds between the GaN nanowires, the termination layer, and the substrate.

The large surface-to-volume ratio of GaN nanowires implicates sensitivity of the optical and electrical properties of the nanowires to their surroundings. The implementation of an (Al,Ga)N shell with a larger band gap around the GaN nanowire core is a promising geometry to seal the GaN surface. We investigate the luminescence and structural properties of selective area-grown GaN-(Al,Ga)N core-shell nanowires grown on Si and diamond substrates. While the (Al,Ga)N shell allows a suppression of yellow defect luminescence from the GaN core, an overall intensity loss due to Si-related defects at the GaN/(Al,Ga)N interface has been observed in the case of Si substrates. Scanning transmission electron microscopy measurements indicate a superior crystal quality of the (Al,Ga)N shell along the nanowire side facets compared to the (Al,Ga)N cap at the top facet. A nucleation study of the (Al,Ga)N shell reveals a pronounced bowing of the nanowires along the c-direction after a short deposition time which disappears for longer growth times. This is assigned to an initially inhomogeneous shell nucleation. A detailed study of the proceeding shell growth allows the formulation of a strain-driven self-regulating (Al,Ga)N shell nucleation model.

We demonstrate a simple and quick method for the measurement of the in-plane thermal conductance of thin films via steady-state IR thermography. The films are suspended above a hole in an opaque substrate and heated by a homogeneous visible light source. The temperature distribution of the thin films is captured via infrared microscopy and fitted to the analytical expression obtained for the specific hole geometry in order to obtain the in-plane thermal conductivity. For thin films of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate post-treated with ethylene glycol and of polyimide, we find conductivities of 1.0 W m -1 K -1 and 0.4 W m -1 K -1 at room temperature, respectively. These results are in very good agreement with literature values, validating the method developed.

Using pulsed photoionization the coherent spin manipulation and echo formation of ensembles of NV^{-} centers in diamond are detected electrically, realizing contrasts of up to 17%. The underlying spin-dependent ionization dynamics are investigated experimentally and compared to Monte Carlo simulations. This allows the identification of the conditions optimizing contrast and sensitivity, which compare favorably with respect to optical detection.

We demonstrate the selective area growth of GaN-(Al,Ga)N core-shell nanowire heterostructures directly on Si(111). Photoluminescence spectroscopy on as-grown nanowires reveals a strong blueshift of the GaN band gap from 3.40 to 3.64 eV at room temperature. Raman measurements relate this shift to compressive strain within the GaN core. On the nanoscale, cathodoluminescence spectroscopy and scanning transmission electron microscopy prove the homogeneity of strain-related luminescence along the nanowire axis and the absence of significant fluctuations within the shell, respectively. A comparison of the experimental findings with numerical simulations indicates the absence of a significant defect-related strain relaxation for all investigated structures, with a maximum compressive strain of -3.4% for a shell thickness of 50 nm. The accurate control of the nanowire dimensions, namely, core diameter, shell thickness, and nanowire period, via selective area growth allows a specific manipulation of the resulting strain within individual nanowires on the same sample. This, in turn, enables a spatially resolved adjustment of the GaN band gap with an energy range of 240 meV in a one-step growth process.

The photoelectrochemical characterization of silicon carbide (SiC) electrodes is important for enabling a wide range of potential applications for this semiconductor. However, photocorrosion of the SiC surface remains a key challenge, because this process considerably hinders the deployment of this material into functional devices. In this report, we use cyclic voltammetry to investigate the stability of n-type 6H-SiC photoelectrodes in buffered aqueous electrolytes. For measurements in pure Tris buffer, photogenerated holes accumulate at the interface under anodic polarization, resulting in the formation of a porous surface oxide layer. Two possibilities are presented to significantly enhance the stability of the SiC photoelectrodes. In the first approach, redox molecules are added to the buffer solution to kinetically facilitate hole transfer to these molecules, and in the second approach, water oxidation in the electrolyte is induced by depositing a cobalt phosphate catalyst onto the semiconductor surface. Both methods are found to effectively suppress photocorrosion of the SiC electrodes, as confirmed by atomic force microscopy and X-ray photoelectron spectroscopy measurements. The presented study provides straightforward routes to stabilize n-type SiC photoelectrodes in aqueous electrolytes, which is essential for a possible utilization of this material in the fields of photocatalysis and multimodal biosensing.

The nuclear spins of ionized donors in silicon have become an interesting quantum resource due to their very long coherence times. Their perfect isolation, however, comes at a price, since the absence of the donor electron makes the nuclear spin difficult to control. We demonstrate that the quadrupolar interaction allows us to effectively tune the nuclear magnetic resonance of ionized arsenic donors in silicon via strain and determine the two nonzero elements of the S tensor linking strain and electric field gradients in this material to S(11)=1.5×10(22)  V/m2 and S(44)=6×10(22)  V/m2. We find a stronger benefit of dynamical decoupling on the coherence properties of transitions subject to first-order quadrupole shifts than on those subject to only second-order shifts and discuss applications of quadrupole physics including mechanical driving of magnetic resonance, cooling of mechanical resonators, and strain-mediated spin coupling.

Photoactive reaction centers (RCs) are protein complexes in bacteria able to convert sunlight into other forms of energy with a high quantum yield. The photostimulation of immobilized RCs on inorganic electrodes result in the generation of photocurrent that is of interest for biosolar cell applications. This paper reports on the use of novel electrodes based on functional conductive nanocrystalline diamond onto which bacterial RCs are immobilized. A three-dimensional conductive polymer scaffold grafted to the diamond electrodes enables efficient entrapment of photoreactive proteins. The electron transfer in these functional diamond electrodes is optimized through the use of a ferrocene-based electron mediator, which provides significant advantages such as a rapid electron transfer as well as high generated photocurrent. A detailed discussion of the generated photocurrent as a function of time, bias voltage, and mediators in solution unveils the mechanisms limiting the electron transfer in these functional electrodes. This work featuring diamond-based electrodes in biophotovoltaics offers general guidelines that can serve to improve the performance of similar devices based on different materials and geometries.

In this Letter, we devise a fast and effective nuclear spin hyperpolarization scheme, which is, in principle, magnetic field independent. We use this scheme to experimentally demonstrate polarizations of up to 66% for phosphorus donor nuclear spins in bulk silicon, which are created within less than 100  μs in a magnetic field of 0.35 T at a temperature of 5 K. The polarization scheme is based on a spin-dependent recombination process via weakly coupled spin pairs, for which the recombination time constant strongly depends on the relative orientation of the two spins. We further use this scheme to measure the nuclear spin relaxation time and find a value of ∼100  ms under illumination, in good agreement with the value calculated for nuclear spin flips induced by repeated ionization and deionization processes.

In this work the position-controlled growth of GaN nanowires (NWs) on diamond by means of molecular beam epitaxy is investigated. In terms of growth, diamond can be seen as a model substrate, providing information of systematic relevance also for other substrates. Thin Ti masks are structured by electron beam lithography which allows the fabrication of perfectly homogeneous GaN NW arrays with different diameters and distances. While the wurtzite NWs are found to be Ga-polar, N-polar nucleation leads to the formation of tripod structures with a zinc-blende core which can be efficiently suppressed above a substrate temperature of 870 °C. A variation of the III/V flux ratio reveals that both axial and radial growth rates are N-limited despite the globally N-rich growth conditions, which is explained by the different diffusion behavior of Ga and N atoms. Furthermore, it is shown that the hole arrangement has no effect on the selectivity but can be used to force a transition from nanowire to nanotube growth by employing a highly competitive growth regime.