Search

Water stress in agricultural systems may occur slowly or abruptly. Plant reactions to stress differ with regard to its level and duration. The level of plant susceptibility to water deprivation primarily depends on the management of the water content and metabolism adjustments. The aim of this study was to determine the correlation between water-based plant parameters and the yield components of 90 genotypes of winter wheat (Triticum aestivum L.). Since the loss of water is frequently used as a selection criterion to assess drought tolerance, the relationships between the yield and leaf water content, osmotic potential, and gas exchange characteristics were examined. Genotypes 1, 25, 34, 36, 42, 43, 46, 57, 66, 73, and 90 showed 33–45% larger numbers of grains/plant, 19–25% higher weights of grains/plant, and 4% higher thousand grain weights compared to other genotypes. The higher values of the yield components were accompanied by 20–30% lower leaf water content, 39–52% lower osmotic potential, and 4–39% lower water use efficiency. The principal component analysis revealed that the wheat genotypes had noticeable differences in a few physiological parameters that depended on the sowing date. Electrolyte leakage showed a substantial correlation with the sowing date, suggesting that it may not be a suitable factor for the prediction of drought tolerance. The factors that distinguished the examined genotypes the most were the leaf water content, osmotic potential, and water use efficiency. In addition, a significant correlation was observed between the mentioned parameters and yield components. As a result, these parameters may be helpful in genotype characterization in relation to water stress susceptibility, offering a trustworthy plant selection test. [ABSTRACT FROM AUTHOR]

Historically, traditional crossbreeding schemes have predominated in oat breeding. In vitro culture techniques seek to expedite the breeding process and enhance selection efficiency. Maximum yields are achieved from hybrid plants produced by crossing pure (homozygous) lines with the desired traits. Homozygous lines can be produced through conventional breeding methods, which are time-consuming and costly. Alternatively, the production of homozygous lines can be accelerated by producing doubled haploid (DH) plants derived from (haploid) male gametophytes or their microspores (androgenesis). This method condenses the various stages required for producing homozygous lines in a single generation, resulting in significant time and cost savings. These and other advantages render androgenic DHs the preferred choice in numerous important crops where any of the various in vitro experimental techniques (anthers culture or isolated microspores culture) are well-established. However, in the case of oat (Avena sativa L.), an efficient plant regeneration method remains not very effective compared to the most common cereals, possibly due to the known recalcitrance of this cereal to in vitro culture. This review presents the methods through anther and microspore cultures utilized in the production of oat DHs revealing the crucial factors influencing the efficiency of this method in oat (Avena sativa L.). [ABSTRACT FROM AUTHOR]

Pollution of arable land with heavy metals is a worldwide problem. Cadmium (Cd) is a toxic metal that poses a severe threat to humans' and animals' health and lives. Plants can easily absorb Cd from the soil, and plant-based food is the main means of exposure to this hazardous element for humans and animals. Phytoremediation is a promising plant-based approach to removing heavy metals from the soil, and plant growth-promoting micro-organisms such as the fungi Trichoderma can enhance the ability of plants to accumulate metals. Inoculation of Avena sativa L. (oat) with Trichoderma viride enhances germination and seedling growth in the presence of Cd and, in this study, the growth of 6-month-old oat plants in Cd-contaminated soil was not increased by inoculation with T. viride, but a 1.7-fold increase in yield was observed. The content of Cd in oat shoots depended on the Cd content in the soil. Still, it was unaffected by the inoculation with T. viride. A. sativa metallothioneins (AsMTs) participate in plant–fungi interaction, however, their role in this study depended on MT type and Cd concentration. The inoculation of A. sativa with T. viride could be a promising approach to obtaining a high yield in Cd-contaminated soil without increasing the Cd content in the plant. [ABSTRACT FROM AUTHOR]

Water deficit affects the growth as well as physiological and biochemical processes in plants. The aim of this study was to determine differences in physiological and biochemical responses to drought stress in two wheat cultivars—Chinese Spring (CS) and SQ1 (which are parents of a mapping population of doubled haploid lines)—and to relate these responses to final yield and agronomic traits. Drought stress was induced by withholding water for 14 days, after which plants were re-watered and maintained until harvest. Instantaneous gas exchange parameters were evaluated on the 3rd, 5th, 10th, and 14th days of seedling growth under drought. After 14 days, water content and levels of chlorophyll a+b, carotenoids, malondialdehyde, soluble carbohydrates, phenolics, salicylic acid, abscisic acid (ABA), and polyamines were measured. At final maturity, yield components (grain number and weight), biomass, straw weight, and harvest index were evaluated. Physiological and biochemical parameters of CS responded more than those of SQ1 to the 14-day drought, reflected in a greater reduction in final biomass and yield in CS. Marked biochemical differences between responses of CS and SQ1 to the drought were found for soluble carbohydrates and polyamines. These would be good candidates for testing in the mapping population for the coincidence of the genetic control of these traits and final biomass and yield. [ABSTRACT FROM AUTHOR]

Aims: Due to the lack of experimental databases, together with the chemical complexity and the dynamic nature of plants' metabolome, most of the metabolites in complex biological materials (like plant in vitro tissue cultures) are not‐annotated, unidentified metabolites. In this study, a method for further metabolite characterization and classification based on the UPLC‐HESI‐HRMS/MS approach for small‐leaved basil (Ocimum basilicum L. var. minimum Alef.) callus and cell suspension culture is presented. Key results: A total of 2168 metabolic features were detected, out of which the database for exact mass metabolic profiling for 1949 metabolites is presented here since there is no available database dedicated to O. basilicum. We further focused on secondary metabolites (particularly phenolic compounds). The presence of 60 different phenolic compounds belonging mainly to the groups of flavonoids, glycosides, terpenoids, and phenolic acids is confirmed. By comparing relative abundances of phenolic compounds from callus culture and cell suspension culture, both grown on two types of media, via svd‐PCА, univariate analysis, post‐hoc tests, and heatmapping of metabolites, we provided a practical example of how resources presented here can be further applied in tissue culture‐based basil metabolomics studies. Utility: This study represents the first approach toward routine targeted investigation of secondary metabolites in basil in vitro cultures and provides various opportunities for new‐generation analyses. [ABSTRACT FROM AUTHOR]

Plant growth and the process of yield formation in crops are moderated by surrounding conditions, as well as the interaction of the genetic background of plants and the environment. In the last two decades, significant climatic changes have been observed, generating unfavorable and harmful impacts on plant development. Drought stress can be considered one of the most dangerous environmental factors affecting the life cycle of plants, reducing biomass production and, finally, the yield. Plants can respond to water deficit in a wide range, which depends on the species, genetic variability within the species, the plant's ontogenesis stage, the intensity of the stress, and other potential stress factors. In plants, it is possible to observe hybrids between different taxa that certain traits adopted to tolerate stress conditions better than the parent plants. Oat × maize addition (OMA) plants are good examples of hybrids generated via wide crossing. They can exhibit morphological, physiological, and biochemical variations implemented by the occurrence of extra chromosomes of maize, as well as the interaction of maize and oat chromatin. The initial goal of the study was to identify OMA lines among plants produced by wide crossing with maize. The main goal was to investigate differences in OMA lines according to the Excised Leaf Water Loss (ELWL) test and to identify specific biochemical changes and agronomic traits under optimal water conditions and soil drought. Additionally, detection of any potential alterations that are stable in F2 and F3 generations. The aforementioned outcomes were the basis for the selection of OMA lines that tolerate growth in an environment with limited water availability. The molecular analysis indicated 12.5% OMA lines among all tested descendants of wide oat-maize crossing. The OMA lines significantly differ according to ELWL test results, which implies some anatomical and physiological adaptation to water loss from tissues. On the first day of drought, plants possessed 34% more soluble sugars compared to control plants. On the fourteen day of drought, the amount of soluble sugars was reduced by 41.2%. A significant increase of phenolic compounds was observed in the fourteen day of drought, an average of 6%, even up to 57% in line 9. Soil drought substantially reduced stem biomass, grains number, and mass per plant. Lower water loss revealed by results of the ELWL test correlated with the high yield of OMA lines. Phenolic compound content might be used as a biochemical indicator of plant drought tolerance since there was a significant correlation with the high yield of plants subjected to soil drought. [ABSTRACT FROM AUTHOR]

Oat (Avena sativa L.) has recently gained importance due to the discovery of a variety of health benefits and new opportunities of use. There is no efficient protocol for the production of oat doubled haploid (DH) lines. The aim of this study was to increase the efficiency of obtaining DHs of oat by the wide crossing method. The study was performed on five oat genotypes. We have compared the induction of embryos after pollination with maize, sorghum and millet pollen as well as the development of haploid embryos isolated 2, 3 and 4 weeks after pollination and cultivated on media with different sugar content. Haploid plants were treated with colchicine after or before acclimation to natural conditions. Of the three types of pollen used, the largest number of haploid embryos was obtained using maize pollen. Three weeks after pollination was the most suitable time for the isolation and cultivation of the embryos. The most efficient medium enabling the development of embryos and conversion to plants was 190-2 containing 9% of maltose. Colchicine treatment of acclimated plants provided high survival rate.