Search

Decisions are not necessarily easy to separate into a planning and an execution phase and the decision-making process can often be reflected in the movement associated with the decision. Here, we used formalized definitions of concepts relevant in decision-making and learning to explore if and how these concepts correlate with decision-related movement paths, both during and after a choice is made. To this end, we let 120 participants (46 males, mean age = 24.5 years) undergo a repeated probabilistic two-choice task with changing probabilities where we used mouse-tracking, a simple non-invasive technique, to study the movements related to decisions. The decisions of the participants were modelled using Bayesian inference which enabled the computation of variables related to decision-making and learning. Analyses of the movement during the decision showed effects of relevant decision variables, such as confidence, on aspects related to, for instance, timing and pausing, range of movement and deviation from the shortest distance. For the movements after a decision there were some effects of relevant learning variables, mainly related to timing and speed. We believe our findings can be of interest for researchers within several fields, spanning from social learning to experimental methods and human-machine/robot interaction., (© 2024. The Author(s).)

Crying is an ubiquitous communicative signal in infancy. This meta-analysis synthesizes data on parent-reported infant cry durations from 17 countries and 57 studies until infant age 12 months (N = 7580, 54% female from k = 44; majority White samples, where reported, k = 18), from studies before the end Sept. 2020. Most studies were conducted in the United States, the United Kingdom, and Canada (k = 32), and at the traditional cry "peak" (age 5-6 weeks), where the pooled estimate for cry and fuss duration was 126 mins (SD = 61), with high heterogeneity. Formal modeling of the meta-analytic data suggests that the duration of crying remains substantial in the first year of life, after an initial decline., (© 2022 The Authors. Child Development published by Wiley Periodicals LLC on behalf of Society for Research in Child Development.)

The adoption of additive manufacturing (AM) techniques into the medical space has revolutionised tissue engineering. Depending upon the tissue type, specific AM approaches are capable of closely matching the physical and biological tissue attributes, to guide tissue regeneration. For hard tissue such as bone, powder bed fusion (PBF) techniques have significant potential, as they are capable of fabricating materials that can match the mechanical requirements necessary to maintain bone functionality and support regeneration. This review focuses on the PBF techniques that utilize laser sintering for creating scaffolds for bone tissue engineering (BTE) applications. Optimal scaffold requirements are explained, ranging from material biocompatibility and bioactivity, to generating specific architectures to recapitulate the porosity, interconnectivity, and mechanical properties of native human bone. The main objective of the review is to outline the most common materials processed using PBF in the context of BTE; initially outlining the most common polymers, including polyamide, polycaprolactone, polyethylene, and polyetheretherketone. Subsequent sections investigate the use of metals and ceramics in similar systems for BTE applications. The last section explores how composite materials can be used. Within each material section, the benefits and shortcomings are outlined, including their mechanical and biological performance, as well as associated printing parameters. The framework provided can be applied to the development of new, novel materials or laser-based approaches to ultimately generate bone tissue analogues or for guiding bone regeneration.

Patients often opt for implantation of testicular prostheses following orchidectomy for cancer or torsion. Recipients of testicular prostheses report issues regarding firmness, shape, size, and position, aspects of which relate to current limitations of silicone materials used and manufacturing methods for soft prostheses. We aim to create a 3D printable testicular prosthesis which mimics the natural shape and stiffness of a human testicle using a lattice infill structure. Porous testicular prostheses were engineered with relative densities from 0.1 to 0.9 using a repeating cubic unit cell lattice inside an anatomically accurate testicle 3D model. These models were printed using a multi-jetting process with an elastomeric material and compared with current market prostheses using shore hardness tests. Additionally, standard sized porous specimens were printed for compression testing to verify and match the stiffness to human testicle elastic modulus (E-modulus) values from literature. The resulting 3D printed testicular prosthesis of relative density between 0.3 and 0.4 successfully achieved a reduction of its bulk compressive E-modulus from 360 KPa to a human testicle at 28 Kpa. Additionally, this is the first study to quantitatively show that current commercial testicular prostheses are too firm compared to native tissue. 3D printing allows us to create metamaterials that match the properties of human tissue to create customisable patient specific prostheses. This method expands the use cases for existing biomaterials by tuning their properties and could be applied to other implants mimicking native tissues., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Skewes, Chen, Forrestal, Rukin and Woodruff.)

Problem gambling has been linked to impairments in decision-making under uncertainty. Problem gamblers are more likely to favor high-risk, high-reward, and short-term gains over more advantageous choice alternatives, and this preference has been linked to impaired learning about decision outcomes. In this paper we link specific learning processes in decision-making to specific harms related to problem gambling. We asked a group of 140 casual gamblers to 1) perform a canonical decision-making task (the Iowa Gambling Task) online, and 2) to complete a self-report survey (the GamTest) designed to measure self-perceived harm caused by their gambling. We used a reinforcement learning model to explain individual differences in the decision task, and related individuals' model parameters to the specific problem areas reported using the questionnaire. We found that people who learned more from gains than from losses on the task were more likely to report overall gambling problems, and problems specifically related to money. We also found that people whose learning was more driven by the frequency of rewards were more likely to report problems related to the amount of time spent gambling, as well as social problems. We discuss possible psychological and neural processes mediating learning and gambling related harms, and we discuss the relevance of our approach to the diagnosis of problem gambling and its consequences., (Copyright © 2020. Published by Elsevier Ltd.)

Craniofacial prostheses are commonly used to restore aesthetics for those suffering from malformed, damaged, or missing tissue. Traditional fabrication is costly, uncomfortable for the patient, and laborious; involving several hours of hand-crafting by a prosthetist, with the results highly dependent on their skill level. In this paper, we present an advanced manufacturing framework employing three-dimensional scanning, computer-aided design, and computer-aided manufacturing to efficiently fabricate patient-specific ear prostheses. Three-dimensional scans were taken of ears of six participants using a structured light scanner. These were processed using software to model the prostheses and 3-part negative moulds, which were fabricated on a low-cost desktop 3D printer, and cast with silicone to produce ear prostheses. The average cost was approximately $3 for consumables and $116 for 2 h of labour. An injection method with smoothed 3D printed ABS moulds was also developed at a cost of approximately $155 for consumables and labour. This contrasts with traditional hand-crafted prostheses which range from $2,000 to $7,000 and take around 14 to 15 h of labour. This advanced manufacturing framework provides potential for non-invasive, low cost, and high-accuracy alternative to current techniques, is easily translatable to other prostheses, and has potential for further cost reduction.

Background: Three-dimensional (3D) printing is a promising technology, but the limitations are often poorly understood. We compare different 3D printing methods with conventional machining techniques in manufacturing meatal urethral dilators which were recently removed from the Australian market., Methods: A prototype dilator was 3D printed vertically orientated on a low-cost fused deposition modelling (FDM) 3D printer in polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). It was also 3D printed horizontally orientated in ABS on a high-end FDM 3D printer with soluble support material, as well as on an SLS 3D printer in medical nylon. The dilator was also machined in stainless steel using a lathe. All dilators were tested mechanically in a custom rig by hanging calibrated weights from the handle until the dilator snapped., Results: The horizontally printed ABS dilator experienced failure at a greater load than the vertically printed PLA and ABS dilators, respectively (503 g vs 283 g vs 163 g, p < 0.001). The SLS nylon dilator and machined steel dilator did not fail. The steel dilator is the most expensive with a quantity of five at 98 USD each, but this decreases to 30 USD each for a quantity of 1000. In contrast, the cost for the SLS dilator is 33 USD each for five and 27 USD each for 1000., Conclusions: Low-cost FDM 3D printing is not a replacement for conventional manufacturing. 3D printing is best used for patient-specific parts, prototyping or manufacturing complex parts that have additional functionality that cannot otherwise be achieved.

Three-dimensional (3D) printed prostate cancer models are an emerging adjunct for urological surgical planning and patient education, however published methods are costly which limits their translation into clinical practice. Multi-colour extrusion fused deposition modelling (FDM) can be used to create 3D prostate cancer models of a quality comparable to more expensive techniques at a fraction of the cost. Three different 3D printing methods were used to create the same 3D prostate model: FDM, colour jet printing (CJP) and material jetting (MJ), with a calculated cost per model of USD 20, USD 200 and USD 250 respectively. When taking into account the cost, the FDM prostate models are the most preferred 3D printing method by surgeons. This method could be used to manufacture low-cost 3D printed models across other medical disciplines.

Three-dimensional (3D) printing is an increasingly popular manufacturing technique that allows highly complex objects to be fabricated with no retooling costs. This increasing popularity is partly driven by falling barriers to entry such as system set-up costs and ease of operation. The following protocol presents the design and construction of an Additive Manufacturing Melt Extrusion (ADDME) 3D printer for the fabrication of custom parts and components. ADDME has been designed with a combination of 3D-printed, laser-cut, and online-sourced components. The protocol is arranged into easy-to-follow sections, with detailed diagrams and parts lists under the headings of framing, y-axis and bed, x-axis, extrusion, electronics, and software. The performance of ADDME is evaluated through extrusion testing and 3D printing of complex objects using viscous cream, chocolate, and Pluronic F-127 (a model for bioinks). The results indicate that ADDME is a capable platform for the fabrication of materials and constructs for use in a wide range of industries. The combination of detailed diagrams and video content facilitates access to low-cost, easy-to-operate equipment for individuals interested in 3D printing of complex objects from a wide range of materials.

Three-dimensional (3D) printing or additive manufacturing is a new technology that has seen rapid development in recent years with decreasing costs. 3D printing allows the creation of customised, finely detailed constructs. Technological improvements, increased printer availability, decreasing costs, improved cell culture techniques, and biomaterials have enabled complex, novel and individualised medical treatments to be developed. Although the long-term goal of printing biocompatible organs has not yet been achieved, major advances have been made utilising 3D printing in biomedical engineering. In this literature review, we discuss the role of 3D printing in relation to urological surgery. We highlight the common printing methods employed and show examples of clinical urological uses. Currently, 3D printing can be used in urology for education of trainees and patients, surgical planning, creation of urological equipment, and bioprinting. In this review, we summarise the current applications of 3D-printing technology in these areas of urology., (© 2019 The Authors BJU International © 2019 BJU International Published by John Wiley & Sons Ltd.)

The field of social robotics offers an unprecedented opportunity to probe the process of impression formation and the effects of identity-based stereotypes (e.g. about gender or race) on social judgements and interactions. We present the concept of fair proxy communication-a form of robot-mediated communication that proceeds in the absence of potentially biasing identity cues-and describe how this application of social robotics may be used to illuminate implicit bias in social cognition and inform novel interventions to reduce bias. We discuss key questions and challenges for the use of robots in research on the social cognition of bias and offer some practical recommendations. We conclude by discussing boundary conditions of this new form of interaction and by raising some ethical concerns about the inclusion of social robots in psychological research and interventions. This article is part of the theme issue 'From social brains to social robots: applying neurocognitive insights to human-robot interaction'.

Previous research using the dot-perspective task has produced evidence that humans may be equipped with a mechanism that spontaneously tracks others' gaze direction and thereby acquires information about what they can see. Other findings, however, support the alternative hypothesis that a spatial-cuing mechanism underpins the effect observed in the dot-perspective task. To adjudicate between these hypotheses, we developed a double-cuing version of Posner's (1980) spatial-cuing paradigm to be implemented in the dot-perspective task, and conducted 3 experiments in which we manipulated stimulus-onset asynchrony, as well as secondary task demands. Crucially, the 2 conflicting hypotheses generated divergent patterns of predictions across these experimental conditions. Our results support the hypothesis of an automatic perspective-taking mechanism. (PsycINFO Database Record, ((c) 2018 APA, all rights reserved).)

Previous studies suggest that religious prayer can alter the experience of pain via expectation mechanisms. While brain processes related to other types of top-down modulation of pain have been studied extensively, no research has been conducted on the potential effects of active religious coping. Here, we aimed at investigating the neural mechanisms during pain modulation by prayer and their dependency on the opioidergic system. Twenty-eight devout Protestants performed religious prayer and a secular contrast prayer during painful electrical stimulation in two fMRI sessions. Naloxone or saline was administered prior to scanning. Results show that pain intensity was reduced by 11% and pain unpleasantness by 26% during religious prayer compared to secular prayer. Expectancy predicted large amounts (70-89%) of the variance in pain intensity. Neuroimaging results revealed reduced neural activity during religious prayer in a large parietofrontal network relative to the secular condition. Naloxone had no significant effect on ratings or neural activity. Our results thus indicate that, under these conditions, pain modulation by prayer is not opioid-dependent. Further studies should employ an optimized design to explore whether reduced engagement of the frontoparietal system could indicate that prayer may attenuate pain through a reduction in processing of pain stimulus saliency and prefrontal control rather than through known descending pain inhibitory systems.