Search

Optical parametric oscillation (OPO) in Kerr microresonators can efficiently transfer near-infrared laser light into the visible spectrum. To date, however, chromatic dispersion has mostly limited output wavelengths to >560 nm, and robust access to the whole green light spectrum has not been demonstrated. In fact, wavelengths between 532 nm and 633 nm, commonly referred to as the "green gap", are especially challenging to produce with conventional laser gain. Hence, there is motivation to extend the Kerr OPO wavelength range and develop reliable device designs. Here, we experimentally show how to robustly access the entire green gap with Kerr OPO in silicon nitride microrings pumped near 780 nm. Our microring geometries are optimized for green-gap emission; in particular, we introduce a dispersion engineering technique, based on partially undercutting the microring, which not only expands wavelength access but also proves robust to variations in resonator dimensions, in particular, the microring width. Using just two devices, we generate >100 wavelengths evenly distributed throughout the green gap, as predicted by our dispersion simulations. Moreover, we establish the usefulness of Kerr OPO to coherent applications by demonstrating continuous frequency tuning (>50 GHz) and narrow optical linewidths (<1 MHz). Our work represents an important step in the quest to bring nonlinear nanophotonics and its advantages to the visible spectrum., Comment: 12 pages, 8 figures

Quantum state tomography is the conventional method used to characterize density matrices for general quantum states. However, the data acquisition time generally scales linearly with the dimension of the Hilbert space, hindering the possibility of dynamic monitoring of a high-dimensional quantum system. Here, we demonstrate a direct tomography protocol to measure density matrices of photons in the position basis through the use of a polarization-resolving camera, where the dimension of density matrices can be as large as 580$\times$580 in our experiment. The use of the polarization-resolving camera enables parallel measurements in the position and polarization basis and as a result, the data acquisition time of our protocol does not increase with the dimension of the Hilbert space and is solely determined by the camera exposure time (on the order of 10 ms). Our method is potentially useful for the real-time monitoring of the dynamics of quantum states and paves the way for the development of high-dimensional, time-efficient quantum metrology techniques.

Spatial resolution is one of the most important specifications of an imaging system. Recent results in quantum parameter estimation theory reveal that an arbitrarily small distance between two incoherent point sources can always be efficiently determined through the use of a spatial mode sorter. However, extending this procedure to a general object consisting of many incoherent point sources remains challenging, due to the intrinsic complexity of multi-parameter estimation problems. Here, we generalize the Richardson-Lucy (RL) deconvolution algorithm to address this challenge. We simulate its application to an incoherent confocal microscope, with a Zernike spatial mode sorter replacing the pinhole used in a conventional confocal microscope. We test different spatially incoherent objects of arbitrary geometry, and we find that the resolution enhancement of sorter-based microscopy is on average over 30% higher than that of a conventional confocal microscope using the standard RL deconvolution algorithm. Our method could potentially be used in diverse applications such as fluorescence microscopy and astronomical imaging.

The orbital angular momentum (OAM) of photons presents a degree of freedom for enhancing the secure key rate of free-space quantum key distribution (QKD) through mode-division multiplexing (MDM). However, atmospheric turbulence can lead to substantial modal crosstalk, which is a long-standing challenge to MDM for free-space QKD. Here, we show that the digital generation of time-reversed wavefronts for multiple probe beams is an effective method for mitigating atmospheric turbulence. We experimentally characterize seven OAM modes after propagation through a 340-m outdoor free-space link and observe an average modal crosstalk as low as 13.2% by implementing real-time time reversal. The crosstalk can be further reduced to 3.4% when adopting a mode spacing $\Delta \ell$ of 2. We implement a classical MDM system as a proof-of-principle demonstration, and the bit error rate is reduced from $3.6\times 10^{-3}$ to be less than $1.3\times 10^{-7}$ through the use of time reversal. We also propose a practical and scalable scheme for high-speed, mode-multiplexed QKD through a turbulent link. The modal crosstalk can be further reduced by using faster equipment. Our method can be useful to various free-space applications that require crosstalk suppression., Comment: Supplemental Material is included

The large number of spatial modes supported by standard multimode fibers is a promising platform for boosting the channel capacity of quantum and classical communications by orders of magnitude. However, the practical use of long multimode fibers is severely hampered by modal crosstalk and polarization mixing. To overcome these challenges, we develop and experimentally demonstrate a vectorial time reversal technique, which is accomplished by digitally pre-shaping the wavefront and polarization of the forward-propagating signal beam to be the phase conjugate of an auxiliary, backward-propagating probe beam. Here, we report an average modal fidelity above 80% for 210 Laguerre-Gauss and Hermite-Gauss modes by using vectorial time reversal over an unstabilized 1-km-long fiber. We also propose a practical and scalable spatial-mode-multiplexed quantum communication protocol over long multimode fibers to illustrate potential applications that can be enabled by our technique., Comment: Supplementary Information is included

Free-space optical communication is a promising means to establish versatile, secure and high-bandwidth communication for many critical point-to-point applications. While the spatial modes of light offer an additional degree of freedom to increase the information capacity of an optical link, atmospheric turbulence can introduce severe distortion to the spatial modes and lead to data degradation. Here, we propose and demonstrate a vector-beam-based, turbulence-resilient communication protocol, namely spatial polarization differential phase shift keying (SPDPSK), that can encode a large number of information levels using orthogonal spatial polarization states of light. We show experimentally that the spatial polarization profiles of the vector modes are resilient to atmospheric turbulence, and therefore can reliably transmit high-dimensional information through a turbid channel without the need of any adaptive optics for beam compensation. We construct a proof-of-principle experiment with a controllable turbulence cell. Using 34 vector modes, we have measured a channel capacity of 4.84 bits per pulse (corresponding to a data error rate of 4.3\%) through a turbulent channel with a scintillation index larger than 1. Our SPDPSK protocol can also effectively transmit 4.02 bits of information per pulse using 18 vector modes through even stronger turbulence with a scintillation index of 1.54. Our study provides direct experimental evidence on how the spatial polarization profiles of vector beams are resilient to atmospheric turbulence and paves the way towards practical, high-capacity, free-space communication solutions with robust performance under harsh turbulent environments.

Improving axial resolution is crucial for three-dimensional optical imaging systems. Here we present a scheme of axial superresolution for two incoherent point sources based on spatial mode demultiplexing. A radial mode sorter is used to losslessly decompose the optical fields into a radial mode basis set to extract the phase information associated with the axial positions of the point sources. We show theoretically and experimentally that, in the limit of a zero axial separation, our scheme allows for reaching the quantum Cram\'er-Rao lower bound and thus can be considered as one of the optimal measurement methods. Unlike other superresolution schemes, this scheme does not require neither activation of fluorophores nor sophisticated stabilization control. Moreover, it is applicable to the localization of a single point source in the axial direction. Our demonstration can be useful to a variety of applications such as far-field fluorescence microscopy., Comment: Comments are welcome

The Hermite-Gaussian (HG) modes, sometimes also referred to as transverse electromagnetic modes in free space, form a complete and orthonormal basis that have been extensively used to describe optical fields. In addition, these modes have been shown to be helpful to enhance information capacity of optical communications as well as to achieve super-resolution imaging in microscopy. Here we propose and present the realization of an efficient, robust mode sorter that can sort a large number of HG modes based on the relation between HG modes and Laguerre-Gaussian (LG) modes. We experimentally demonstrate the sorting of 16 HG modes, and our method can be readily extended to a higher-dimensional state space in a straightforward manner. We expect that our demonstration will have direct applications in a variety of fields including fiber optics, classical and quantum communications, as well as super-resolution imaging.

The transverse structure of light is recognized as a resource that can be used to encode information onto photons and has been shown to be useful to enhance communication capacity as well as resolve point sources in superresolution imaging. The Laguerre-Gaussian (LG) modes form a complete and orthonormal basis set and are described by a radial index p and an orbital angular momentum (OAM) index l. Earlier works have shown how to build a sorter for the radial index p or/and the OAM index l of LG modes, but a scalable and dedicated LG mode sorter which simultaneous determinate p and l is immature. Here we propose and experimentally demonstrate a scheme to accomplish complete LG mode sorting, which consists of a novel, robust radial mode sorter that can be used to couple radial modes to polarizations, an l-dependent phase shifter and an OAM mode sorter. Our scheme is in principle efficient, scalable, and crosstalk-free, and therefore has potential for applications in optical communications, quantum information technology, superresolution imaging, and fiber optics.

Spectroscopic methods are a sensitive way to determine the chemical composition of potentially hazardous materials. Here, we demonstrate that thermally-tuned high-Q photonic crystal cavities can be used as a compact high-resolution on-chip spectrometer. We have used such a chip-scale spectrometer to measure the absorption spectra of both acetylene and hydrogen cyanide in the 1550 nm spectral band, and show that we can discriminate between the two chemical species even though the two materials have spectral features in the same spectral region. Our results pave the way for the development of chip-size chemical sensors that can detect toxic substances.

Retrieving the vast amount of information carried by a photon is an enduring challenge in quantum metrology science and quantum photonics research. The transverse spatial state of a photon is a convenient high-dimensional quantum system for study, as it has a well-understood classical analogue as the transverse complex field profile of an optical beam. One severe drawback of all currently available quantum metrology techniques is the need for a time-consuming characterization process, which scales very unfavorably with the dimensionality of the quantum system. Here we demonstrate a technique that directly measures a million-dimensional photonic spatial state in a single setting. Through the arrangement of a weak measurement of momentum and parallel strong measurements of position, the complex values of the entire photon state vector become measurable directly. The dimension of our measured state is approximately four orders of magnitude larger than previously measured. Our work opens up a practical route for characterizing high-dimensional quantum systems in real time. Furthermore, our demonstration also serve as a high-speed, extremely-high-resolution unambiguous complex field measurement technique for diverse classical applications., Comment: 5 pages, 3 figures