Search

Several series of batch and fixed bed column experiments have been carried out to study the methylene blue sorption and transport in sandy and clay soil under different experimental conditions. The non linear forms of the pseudo-second order kinetic model and the Freundlich and Langmuir isotherm models were used to quantify the maximum adsorption capacity of the used materials. The effects of several experimental factors (flow rate, initial concentration, saturation condition of soil and soil heterogeneity) on the breakthrough curves have been undertaken. Experimental data revealed that the breakthrough curves depend on flow rate, methylene blue inlet concentration, saturation condition of soil and soil heterogeneity. A two dimensional model based on Richards equation and advection–dispersion equation coupled with adsorption model was developed. A comparative analysis between this model and Thomas model showed the effectiveness of advection–dispersion model to describe the experimental breakthrough curves and particularly in an unsaturated heterogeneous medium. The advection dispersion model reproduces perfectly the transfer mechanisms in porous media and seems to be a useful tool to better understanding the physical processes and the effect of capillary barrier of methylene blue transport in unsaturated heterogeneous soil. The result shows also that the soil heterogeneity has a significant effect on methylene blue adsorption through unsaturated layered media. Furthermore, in the interface between two layers with different hydrodynamic proprieties, the adsorption capacity increases with a decrease in kinetic adsorption rate caused by the decrease in pore water velocity.

Wind energy is a key driver for the transformation towards a sustainable energy system. From a certain point of view, the main parameter is to increase the turbines' height and the rotor's size to improve the economic aspect and performance. On the other hand, 'ducted wind turbines', which can significantly improve the performance of smaller wind turbines, are attracting much attention. The objective is to create system compatible with urban environments and at the same time improve the efficiency of ducted wind turbines. This article studies a configuration, namely a wind turbine equipped with a wind catcher system, by studying it both experimentally and numerically. First, the tests are carried out on the system without inserting the wind rotor. Then the results of the developed model are compared via experimental tests, showing that it is possible to accept wind from all directions and from different heights by using the wind collector system and the cones. The results also show that the maximum wind speed increases by 2.5 times in the middle of the cylindrical part where the turbine is planned to be placed. Finally, the effects of inserting a vertical axis wind turbine inside the cylindrical part of the system on its power coefficient are studied. The results show that the system significantly improves the maximum power coefficient of the turbine. [ABSTRACT FROM AUTHOR]

In this work, we investigated the morphological effect of dichloromethane (DCM) on alfalfa (Medicago sativa) plant. We studied in vitro the influence of its concentration on alfalfa germination. The plants were placed in pots for 15 weeks, and exposed to increasing concentrations of DCM (50 µg L−1 and 84 mg L−1). In addition, we examined the effect of two manures (cow and sheep), which were applied to a contaminated soil, on alfalfa plant growth. The effect of the presence of dichloromethane is obvious even in plant–soil manure system. In fact, in the event of contamination, the soil–cow manure mixture represents the best setting medium for the Alfalfa plant compared to other environments, regardless of the contamination level. Indeed, the presence of two types of manure does not allow the suppression of the inhibitory effect of dichloromethane on the mass of the dry matter of the aerial part which is 18.38% for the cow manure-amended soil and 13.96% for the sheep manure-amended soil. [ABSTRACT FROM AUTHOR]

This paper investigates the implementation of an analytical model to determine the porosity of a granular material during reactive and nonreactive sintering. A graphical interpretation of this model is proposed to calculate the porosity by comparing the experimental shrinkage curve with the ideal one. For the nonreactive sintering, some examples have been taken from the literature to illustrate the application of this method for two granular materials (alumina and zircon). In the case of reactive sintering, we have used our experiments to study the sintering behavior of magnesium hydroxide. The shrinkage curve was determined by dilatometer and the porosity was measured by helium pycnometer. The comparison revealed that the porosity calculated from the model is fully consistent with the porosity measurements in the both cases. [ABSTRACT FROM AUTHOR]

The main objective of this work is to investigate and validate the thermal quadrupole method, used in this paper as a semi-analytical method to solve the equations of a falling film in a heated microchannel studied experimentally. In the experimental section, we created a temperature gradient within the liquid, while monitoring the temperature using an infrared camera. Then, a numerical model is established and solved by the thermal quadrupole method. Finally, we conclude with a comparison between the experiments and the numerical study. [ABSTRACT FROM AUTHOR]