Search

Previous research has shown that Iznik glazes are characterized by low potash and magnesia contents. It was therefore suggested that the flux used was either a purified plant ash or some unidentified mineral source of soda. More recently, as a result of the detection of small, but significant, amounts of boron and lithium in Byzantine glasses from western Turkey, which also exhibit low potash and magnesia contents, it has been suggested that the source of the flux used was a soda-rich evaporite associated in some way with the extensive borax deposits in the region. LA-ICP-MS has been used to establish that Iznik glazes also contain similarly small amounts of boron and lithium. The Na/K, Na/Mg, Na/Ca and Na/B ratios for these Iznik glazes are shown to be comparable to the equivalent ratios calculated from published data for waters from a range of Na-HCO3 type hot springs in western Turkey, with the closest match being to the hot springs around Afyon- Gazligöl, which is consistent with documentary evidence. It is therefore proposed that the soda-rich salts produced by evaporating water from these springs to dryness would have provided the flux required for the production of Iznik glazes and high-boron Byzantine glasses. [ABSTRACT FROM AUTHOR]

Analytical data of Roman and early Islamic glass established several primary glass production groups linked to glassmaking centres in the Levant and in Egypt. In contrast, the activities of secondary glass workshops are largely invisible in the compositional fingerprint of first millennium glass. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) of 261 glass finds from the Visigothic settlement of Tolmo de Minateda (Spain) revealed a site-specific contamination pattern due to secondary glass processing and recycling, namely the enrichment of the glass batch by a unique combination of rare alkali elements (Li, K, Rb, Cs). With a median of 21 ppm, Li is particularly distinctive. Elevated lithium contents (Li>30 ppm) are also one of the characteristic features of Iberian plant ash glass from the Islamic period. The earliest known examples of this type of glass were found among the ninth-century remains from Tolmo., (© 2022 The Authors. ChemPlusChem published by Wiley-VCH GmbH.)

Recent archaeological excavations carried out in the western suburbs of Cordoba (Spain) brought to light numerous fragments of archaeological glass from the caliphal period (929-1031 CE). The typological and compositional analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) of 66 fragments enabled the identification of different types of base glass and glass working techniques, identifying local productions, imports and decorative imitations of eastern models. The studied fragments include Mesopotamian, Levantine, Egyptian and possibly Sicilian soda-rich plant ash glass categories, and various glass-decorating techniques such as mould-blowing, pressing, cutting, staining or gilding. The systematic comparison of the trace element patterns of several relief-cut objects identified both imported ware and a locally manufactured sample, whereas all mould-blown pieces were made from locally sourced raw materials. Iberian glassworkers seem to have preferred mould-blowing, probably because of the distinct working properties of locally available high lead glass. The results thus confirm the continuous long-distance exchange of vitreous material, as well as the existence of multiple glassmaking centres in the Iberian Peninsula, illustrating a link between secondary glass working techniques and chemical composition. Furthermore, the identification of several fragments belonging to the same object based on chemical composition allowed us to reconstruct entire vessels and thereby expand the repertoire of known typologies circulating in Umayyad Spain., Supplementary Information: The online version contains supplementary material available at 10.1186/s40494-021-00505-4., Competing Interests: Competing interestsThe authors declare that they have no conflict of interest., (© The Author(s) 2021.)

A large assemblage (n = 307) of architectural glasses (tesserae and windows) from the early 8th-century Umayyad residential site at Khirbat al-Minya was analysed by laser ablation inductively coupled plasma mass spectrometry. Trace element patterns are essential to establish the provenance of the base glass, while the comparative evaluation of the colouring and opacifying additives allow us to advance a production model for the manufacture of glass mosaic tesserae during the early Islamic period. The primary glass types are Levantine I and Egypt 1a, as well as a few older, reused tesserae, and Mesopotamian plant ash glass used for amber-coloured window fragments. Chemical data revealed fundamental differences in the colouring and opacification technologies between the Egyptian and Levantine tesserae. Co-variations of lead and bismuth, and copper, tin and zinc in the Egypt 1a tesserae provide first evidence for the production of different mosaic colours in a single workshop, specialising in the manufacture of tesserae of different colours. No such trend is apparent in the Levantine samples. Red, cobalt blue and gold leaf tesserae were found to be exclusively made from a Levantine base glass, indicating that the generation of some colours may have been a specialised process. The same may apply to the amber-coloured window glass fragments of Mesopotamian origin that exhibit very unusual characteristics, combining elevated copper (2% CuO) with an excess in iron oxide (5% Fe2O3). These findings have significant implications for the production model of strongly coloured glass and the exploitation of resources during the early Islamic period., Competing Interests: The authors have declared that no competing interests exist.

This study investigates glass finds from the Iberian Peninsula as a proxy for identifying the mechanisms underlying technological transformations and innovation in the wake of the Arab conquest in the seventh and eighth centuries CE. High-resolution laser ablation inductively coupled plasma mass spectrometry data combined with lead isotope analyses of a precisely dated (mid-eighth century to 818 CE) glass assemblage from the Rabad of Šaqunda in Cordoba, capital of Umayyad Spain, enabled us to trace the origins of an Iberian glassmaking industry and to unambiguously link it to the exploitation of local raw materials. The analytical data reveal increased recycling, some isolated imports of Islamic plant ash glasses from Mesopotamia, and, most notably, the development of a new type of glassmaking technology that resorted to the use of lead slag from silver and lead mining and processing in the region around Cordoba. The production of this type of lead glass from Šaqunda was short-lived and was subsequently refined by introducing additional fluxing agents. The technological innovation of Islamic glassmaking in Spain evidently drew inspiration from adjacent high-temperature technologies. The revival of glass and the development of a local glassmaking tradition was indirectly related to the wider processes of Islamization, such as the introduction of glazed ceramics that are compositionally related to the lead glasses from Šaqunda., Competing Interests: The authors declare no competing interest., (Copyright © 2020 the Author(s). Published by PNAS.)

The trade of glass beads has long been assumed to have been under Islamic dominance during the early centuries following the Arab conquest of the Middle East, judged by the prevalence of Islamic beads in the archaeological contexts from Viking Scandinavia to medieval Morocco. This paper explores the impact of the Byzantine-Slavic transition on the use and by extension trade of glass beads in the Balkans from the seventh to the ninth century CE. A series of 48 glass beads and 4 vessel fragments from two excavated sites in modern day Albania have been analysed morphologically, technologically and chemically by LA-ICP-MS. The seventh-century beads from Lezha have typological parallels among central European assemblages and are made from recycled natron-type glass. The presence of a high lead-iron-natron variant is of particular interest as it potentially reflects a regional production. The ninth-century beads from Komani are made from soda-rich plant ash glass from the eastern Mediterranean and Mesopotamia and correspond to an Islamic typology. The chronological and geographical differences are reflected in the distinctive cobalt sources used for the two groups. While the beads from Lezha are coloured with a cobalt not correlated with any particular element, the cobalt source of the Komani samples is associated with zinc, typical of Islamic glass making. It thus appears that the supply of beads during the seventh century when the Balkans were under Slavic occupation relied on regional production and recycled material, and that a long-distance trade with the eastern Mediterranean was revived following the Byzantine re-conquest of the south-eastern Adriatic in the ninth century. Intriguingly, the Albanian finds confirm the Islamic control of the production and trade of glass beads during this period and highlight the mediatory role of the Byzantine Empire., (© The Author(s) 2018.)

Capital of the Abbasid Caliphate between 836 and 892 CE, the palace-city of Samarra offers a precise window into early Islamic art and architecture. Excavations conducted more than 100 years ago are seen as the beginnings of scientific Islamic archaeology, and have yielded an exceptional array of finds including a wealth of glass artefacts. The chemical composition of glass reflects the nature of the raw materials and their geological provenance and can therefore reveal past technologies and economic and cultural interactions. Through high-resolution analysis of a comprehensive glass assemblage from Samarra we have new evidence that points to the existence of an advanced Abbasid glass industry, as well as the import of specific glass objects for the thriving new capital city. Quantitative analytical data of 58 elements by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) show a striking correlation between object types and glass compositions. The compositional profiles of two related plant ash groups of architectural glass point to a local production, destined for the decoration of the famed glass walls of Abbasid palaces. The selective use of objects, materials and colours to create reflective and luminous glass walls are indicative of the great cultural and economic value of glass during the Abbasid period. Our findings thus confirm the veracity of written sources that stipulate the production of glass in the vicinity of Samarra, as well as the import of selected artefacts such as Byzantine mosaic tesserae., Competing Interests: The authors have declared that no competing interests exist.

One hundred and forty-one glass fragments from medieval Ciudad de Vascos (Toledo, Spain) were analysed by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). The glasses fall into three types according to the fluxing agents used: mineral natron, soda-rich plant ash, and a combination of soda ash and lead. The natron glasses can be assigned to various established primary production groups of eastern Mediterranean provenance. Different types of plant ash glasses indicate differences in the silica source as well as the plant ash component, reflecting changing supply mechanisms. While the earlier plant ash groups can be related to Islamic glasses from the Near East, both in terms of typology and composition, the chemical signature of the later samples appear to be specific to glass from the Iberian Peninsula. This has important implications for our understanding of the emerging glass industry in Spain and the distribution patterns of glass groups and raw materials. The plant ash that was used for the Vascos glasses is rich in soda with low levels of potash, similar to ash produced in the eastern Mediterranean. It could therefore be possible that Levantine plant ash was imported and used in Islamic period glass workshops in Spain. Unlike central and northern Europe where an independent glass industry based on potassium-rich wood ash developed during the Carolingian period, the prevalence of soda ash and soda ash lead glass on the Iberian Peninsula indicates its commercial and technological interconnection with the Islamic east. Our study thus traces several stages leading to the development of a specifically Spanish primary glassmaking industry.

The understanding of the glass trade in the first millennium CE relies on the characterisation of well-dated compositional groups and the identification of their primary production sites. 275 Byzantine glass weights from the British Museum and the Bibliothèque nationale de France dating to the sixth and seventh century were analysed by LA-ICP-MS. Multivariate statistical and graphical data analysis discriminated between six main primary glass types. Primary glass sources were differentiated based on multi-dimensional comparison of silica-derived elements (MgO, Al2O3, CaO, TiO2, Fe2O3, ZrO2) and components associated with the alkali source (Li2O, B2O3). Along with Egyptian and Levantine origins of the glassmaking sands, variations in the natron source possibly point to the exploitation of two different natron deposits. Differences in strontium to calcium ratios revealed variations in the carbonate fractions in the sand. At least two cobalt sources were employed as colouring agents, one of which shows strong correlations with nickel, indicating a specific post-Roman cobalt source. Typological evidence identified chronological developments in the use of the different glass groups. Throughout the sixth century, Byzantine glass weights were predominately produced from two glasses that are probably of an Egyptian origin (Foy-2 and Foy-2 high Fe). Towards the second half of the sixth century a new but related plant-ash glass type emerged (Magby). Levantine I was likewise found among the late sixth- to early seventh-century samples. The use of different dies for the same batch testifies to large-scale, centralised production of the weights, while the same die used for different primary production groups demonstrates the co-existence of alternative sources of supply. Given the comprehensive design of our study, these results can be extrapolated to the wider early Byzantine glass industry and its changes at large., Competing Interests: Competing Interests: We hereby declare that even though two of the authors (AM, CE) are affiliated with the British Museum and one author (MAB) with the Bibliothèque nationale de France, the institutions have merely provided the material and there are no competing financial, professional or personal interests that might have influenced the performance, results or presentation of the work described in this manuscript. The institutional affiliations do not alter our adherence to PLOS ONE policies on sharing data and/or materials.