Search

Your search keyword '"Sanson, Alessandra"' showing total 171 results
Start Over Author "Sanson, Alessandra" Publication Year Range Last 10 years
171 results on '"Sanson, Alessandra"'

10. Exploring the Potential of Cold Sintering for Proton-Conducting Ceramics: A Review.

Author

Bartoletti, Andrea, Mercadelli, Elisa, Gondolini, Angela, and Sanson, Alessandra

Subjects
CERAMIC materials, PROTON conductivity, LEAD, DOPING agents (Chemistry), CHEMICAL stability
Abstract

Proton-conducting ceramic materials have emerged as effective candidates for improving the performance of solid oxide cells (SOCs) and electrolyzers (SOEs) at intermediate temperatures. BaCeO3 and BaZrO3 perovskites doped with rare-earth elements such as Y2O3 (BCZY) are well known for their high proton conductivity, low operating temperature, and chemical stability, which lead to SOCs' improved performance. However, the high sintering temperature and extended processing time needed to obtain dense BCZY-type electrolytes (typically > 1350 °C) to be used as SOC electrolytes can cause severe barium evaporation, altering the stoichiometry of the system and consequently reducing the performance of the final device. The cold sintering process (CSP) is a novel sintering technique that allows a drastic reduction in the sintering temperature needed to obtain dense ceramics. Using the CSP, materials can be sintered in a short time using an appropriate amount of a liquid phase at temperatures < 300 °C under a few hundred MPa of uniaxial pressure. For these reasons, cold sintering is considered one of the most promising ways to obtain ceramic proton conductors in mild conditions. This review aims to collect novel insights into the application of the CSP with a focus on BCZY-type materials, highlighting the opportunities and challenges and giving a vision of future trends and perspectives. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

14. Perovskite: a key structure for a sustainable hydrogen economy.

Author

Sanson, Alessandra

Subjects
*HYDROGEN economy, *IONIC conductivity, *FLEXIBLE structures, *PEROVSKITE, *CONFERENCES & conventions
Abstract

Perovskites materials, due to their peculiar electronic and ionic properties, play a key role in the development of hydrogen-based technologies. Their flexible structure enables an easy tuning of various physical-chemical characteristics, such as ionic and electronic conductivity and redox active sites concentration, fundamental for these applications. Moreover, the same structure can exhibit different properties that can synergically act to improve the performance of the material for a specific application. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

16. Graphene Oxide‐Arginine Composites: Efficient Dual Function Materials for Integrated CO2 Capture and Conversion

Author

Mantovani, Sebastiano, primary, Pintus, Angela, additional, Kovtun, Alessandro, additional, Gondolini, Angela, additional, Casadio, Simone, additional, Sanson, Alessandra, additional, Marforio, Tainah D., additional, Calvaresi, Matteo, additional, Rancan, Marzio, additional, Armelao, Lidia, additional, Bertuzzi, Giulio, additional, Melucci, Manuela, additional, and Bandini, Marco, additional

Published
2024
Full Text
View/download PDF

21. Graphene Oxide‐Arginine Composites: Efficient Dual Function Materials for Integrated CO2 Capture and Conversion.

Author

Mantovani, Sebastiano, Pintus, Angela, Kovtun, Alessandro, Gondolini, Angela, Casadio, Simone, Sanson, Alessandra, Marforio, Tainah D., Calvaresi, Matteo, Rancan, Marzio, Armelao, Lidia, Bertuzzi, Giulio, Melucci, Manuela, and Bandini, Marco

Subjects
CARBON sequestration, GRAPHENE, GRAPHENE oxide, ACTIVATION (Chemistry), THERMAL analysis, SMART materials
Abstract

The "on‐demand" capture and utilization of CO2 is effectively realized with a readily accessible dual function organic composite. The covalent and controlled derivatization of graphene oxide (GO) surface with naturally occurring arginine led to a "smart" material capable of capturing (chemisorption) CO2 from high‐purity flue‐gas as well as low‐concentration streams (i. e. direct air capture) and concomitant chemical activation toward the incorporation into cyclic carbonates. The overall integrated CO2 capture and conversion (ICCC) strategy has been fully elucidated mechanistically via dedicated computational, spectroscopic and thermal analyses. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

29. 3D microextrusion of eco-friendly water based cer-cer composite pastes for hydrogen separation

Author

Universitat Politècnica de Catalunya. Doctorat en Ciència i Enginyeria dels Materials, Universitat Politècnica de Catalunya. Departament de Ciència i Enginyeria de Materials, Universitat Politècnica de Catalunya. CIEFMA-PROCOMAME - Disseny Microestructural i Fabricació Avançada de Materials, Bartoletti, Andrea, Sangiorgi, Alex, Mercadelli, Elisa, Melandri, Cesare, Gondolini, Angela, García González, Sandra, Ortiz Membrado, Laia, Morales Comas, Miguel, Jiménez Piqué, Emilio, Sanson, Alessandra, Universitat Politècnica de Catalunya. Doctorat en Ciència i Enginyeria dels Materials, Universitat Politècnica de Catalunya. Departament de Ciència i Enginyeria de Materials, Universitat Politècnica de Catalunya. CIEFMA-PROCOMAME - Disseny Microestructural i Fabricació Avançada de Materials, Bartoletti, Andrea, Sangiorgi, Alex, Mercadelli, Elisa, Melandri, Cesare, Gondolini, Angela, García González, Sandra, Ortiz Membrado, Laia, Morales Comas, Miguel, Jiménez Piqué, Emilio, and Sanson, Alessandra

Abstract

Ceramic membranes operating at high-temperatures are a key-technology for hydrogen separation processes. Cer-cer composites based on BaCe0.65Zr0.20Y0.15O3-d-Gd0.2Ce0.8O2-d have gained increasing attention as asymmetric membranes for H2 purification, for their high proton-electron conductivity, 100% selectivity, temperature and chemical stability, and intrinsic lower costs compared with the Pd–based technologies. Here, BCZY-GDC composite parts were successfully fabricated for the first time by microextrusion. Water-based pastes with different solid loadings and suitable rheological properties were formulated and printed in single or multilayer structures without nozzle clogging. After deposition, the samples were osmotically dried in concentrated PEG solutions in order to obtain cracks-free green bodies. The further process optimization allowed the production of planar BCZY-GDC ceramics to be potentially applied in asymmetric membrane structures. The mechanical properties of the as-obtained single and multilayer structures as well as of the interface between filaments were assessed through different nanoindentation techniques., Peer Reviewed, Postprint (published version)

Published
2023

41. Chemical and mechanical stability of BCZY-GDC membranes for hydrogen separation

Author

Ministerio de Ciencia, Innovación y Universidades (España), Mercadelli, Elisa, Gondolini, A., Ardit, Mateo, Cruciani, Giuseppe, Melandri, Cesare, Escolástico Rozalén, Sonia, Serra Alfaro, José Manuel, Sanson, Alessandra, Ministerio de Ciencia, Innovación y Universidades (España), Mercadelli, Elisa, Gondolini, A., Ardit, Mateo, Cruciani, Giuseppe, Melandri, Cesare, Escolástico Rozalén, Sonia, Serra Alfaro, José Manuel, and Sanson, Alessandra

Abstract

This work investigates, for the first time, the hydrogen permeation of BaCeZrYO-CeGdO (BCZY-GDC) asymmetric membranes for 100 h, using wet 15% CO in Ar as sweep gas. In the same frame, ex-situ aging tests were performed for 100 h exposure at 750 °C in different atmospheres (H, CO, H + CO), to evaluate the phase, microstructure, and mechanical long-term stability of this system. The thermal aging in H-atmosphere leads to lower flexural strength caused by a microstructure embrittlement of the BCZY-GDC asymmetric membrane, due to chemical expansion/contraction of the GDC cell after the aging cycle. Indeed, micro-cracking of GDC grains, that decreases the composite hardness, is observed in symmetric (pressed pellet) membranes. The aging in CO causes a slightly increase in flexural strength values due to the formation of sub-micrometric Zr-doped ceria-BaCO phases at the expense of the perovskite. Higher hardness values related to the emerging of BaCO islands on the symmetric membrane surface were also recorded. In H + CO atmosphere (real testing condition), the membrane shows a slight decrease in flexural strength and hardness while no evident morphological or structural changes (except the BaCO formation in traces) were observed. This study highlights that promising and stable hydrogen permeation flux values can be recorded using the asymmetric configuration for 100 h, using wet 15% CO in Ar as sweep gas. Neither structural nor morphological modification of the membrane were detected after the testing.

Published
2022

43. Additive-Free Gelatine-Based Devices for Chondral Tissue Regeneration: Shaping Process Comparison among Mould Casting and Three-Dimensional Printing

Author

Montanari, Margherita, primary, Sangiorgi, Alex, additional, Campodoni, Elisabetta, additional, Bassi, Giada, additional, Gardini, Davide, additional, Montesi, Monica, additional, Panseri, Silvia, additional, Sanson, Alessandra, additional, Tampieri, Anna, additional, and Sandri, Monica, additional

Published
2022
Full Text
View/download PDF

44. Electroconductive and injectable hydrogels based on gelatin and PEDOT:PSS for a minimally invasive approach in nervous tissue regeneration

Author

Furlani, Franco, primary, Montanari, Margherita, additional, Sangiorgi, Nicola, additional, Saracino, Emanuela, additional, Campodoni, Elisabetta, additional, Sanson, Alessandra, additional, Benfenati, Valentina, additional, Tampieri, Anna, additional, Panseri, Silvia, additional, and Sandri, Monica, additional

Published
2022
Full Text
View/download PDF

50. Identification of structural changes in CaCu3Ti4O12on high energy ball milling and their effect on photocatalytic performanceElectronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d2cy01299e

Author

Bartoletti, Andrea, Gondolini, Angela, Sangiorgi, Nicola, Aramini, Matteo, Ardit, Matteo, Rancan, Marzio, Armelao, Lidia, Kondrat, Simon A., and Sanson, Alessandra

Abstract

The perovskite CaCu3Ti4O12is known for its ability to photocatalytically degrade model dye molecules using visible light. The influence of ball milling preformed CaCu3Ti4O12on the catalysts structure and performance in the degradation of rhodamine B and the antihistamine cetirizine hydrochloride, which does not absorb light in the visible region, was investigated. The surface area of CaCu3Ti4O12increased from 1 m2g−1to >80 m2g−1on milling with a retention of 96% CaCu3Ti4O12phase purity, as determined by X-ray diffraction and extended X-ray absorption fine structure analysis. Multiple characterisation techniques showed an increase in structural defects on milling, including, for the first time, X-ray absorption near edge spectroscopy which showed changes in the local electronic structure from the perspective of Cu and Ti. Photocatalytic degradation was notably higher with the milled sample than that observed for the as-synthesized sample, even after normalisation for surface area, with a doubling of surface normalised rate constant from 4.91 × 10−4to 9.11 × 10−4L min−1m2for rhodamine B degradation and a tripling for cetirizine hydrochloride degradation from 2.64 × 10−4to 7.92 × 10−4L min −1m−2. The improvement in catalytic performance can be correlated to the defects observed by X-ray absorption spectroscopy.

Published
2023
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results