Search

Supplementary Figures 1-4 from Complex N-Glycan and Metabolic Control in Tumor Cells

Golgi β1,6N-acetylglucosaminyltransferase V (Mgat5) produces β1,6GlcNAc-branched complex N-glycans on cell surface glycoproteins that bind to galectins and promote surface residency of glycoproteins, including cytokine receptors. Carcinoma cells from polyomavirus middle T (PyMT) transgenic mice on a Mgat5−/− background have reduced surface levels of epidermal growth factor (EGF) and transforming growth factor-β (TGF-β) receptors and are less sensitive to acute stimulation by cytokines in vitro compared with PyMT Mgat5+/+ tumor cells but are nonetheless tumorigenic when injected into mice. Here, we report that PyMT Mgat5−/− cells are reduced in size, checkpoint impaired, and following serum withdrawal, fail to down-regulate glucose transport, protein synthesis, reactive oxygen species (ROS), and activation of Akt and extracellular signal-regulated kinase. To further characterize Mgat5+/+ and Mgat5−/− tumor cells, a screen of pharmacologically active compounds was done. Mgat5−/− tumor cells were comparatively hypersensitive to the ROS inducer 2,3-dimethoxy-1,4-naphthoquinone, hyposensitive to tyrosine kinase inhibitors, to Golgi disruption by brefeldin A, and to mitotic arrest by colcemid, hydroxyurea, and camptothecin. Finally, regulation of ROS, glucose uptake, and sensitivities to EGF and TGF-β were rescued by Mgat5 expression or by hexosamine supplementation to complex N-glycan biosynthesis in Mgat5−/− cells. Our results suggest that complex N-glycans sensitize tumor cells to growth factors, and Mgat5 is required to balance responsiveness to growth and arrest cues downstream of metabolic flux. [Cancer Res 2007;67(20):9771–80]

Folate receptor (FR) is a typical tumor-associated antigen that has been widely used as a biomarker for the determination of cancer. A biosensing platform functionalized with folic acid (FA) is essential to FR detection because FA specifically binds FR. We demonstrate an MgZnO dual-gate thin-film transistor (MZO DGTFT) based biosensor for the sensitive determination of FA derivative, hexadecyl alkynated folic acid (HAFA). The receptor is an MZO nanostructure (MZO $_{\mathrm {nano}}$ ) modified sensing pad which electrically connects to the top gate of DGTFT. The bottom gate of DGTFT is used to bias the device to its optimum operation point, enabling high sensitivity. First, 11-azidoundecanoic acid (AA) was bond onto the MZO $_{\mathrm {nano}}$ surface as the linker layer, resulting in negative charges to MZO $_{\mathrm {nano}}$ due to carboxylic acid binding chemistry. HAFA was then immobilized on MZO $_{\mathrm {nano}}$ via click reaction with AA. HAFA is a polar molecule with the positive end adjacent to AA/MZO $_{\mathrm {nano}}$ , and therefore, the electrostatic condition of MZO $_{\mathrm {nano}}$ is impacted again. Such changes were detected by DGTFT that displayed significant drain current variations. Fourier-transform infrared spectroscopy (FTIR) imaging confirms such successful chemical processes. This MZO DGTFT biosensor with HAFA is promising for potential applications in the detection of FR overexpressed cancer cells.

IPr (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) represents the most important NHC (NHC = N-heterocyclic carbene) ligand throughout the field of homogeneous catalysis. Herein, we report the synthesis, catalytic activity, and full structural and electronic characterization of novel, sterically-bulky, easily-accessible NHC ligands based on the hash peralkylation concept, including IPr#, Np# and BIAN-IPr#. The new ligands have been commercialized in collaboration with Millipore Sigma: IPr#HCl, 915653; Np#HCl; 915912; BIAN-IPr#HCl, 916420, enabling broad access of the academic and industrial researchers to new ligands for reaction optimization and screening. In particular, the synthesis of IPr# hinges upon cost-effective, modular alkylation of aniline, an industrial chemical that is available in bulk. The generality of this approach in ligand design is demonstrated through facile synthesis of BIAN-IPr# and Np#, two ligands that differ in steric properties and N-wingtip arrangement. The broad activity in various cross-coupling reactions in an array of N–C, O–C, C–Cl, C–Br, C–S and C–H bond cross-couplings is demonstrated. The evaluation of steric, electron-donating and π-accepting properties as well as coordination chemistry to Au(i), Rh(i) and Pd(ii) is presented. Given the tremendous importance of NHC ligands in homogenous catalysis, we expect that this new class of NHCs will find rapid and widespread application., We report novel, sterically-bulky, easily-accessible NHC ligands based on the hash peralkylation concept. The new ligands have been commercialized in collaboration with Millipore Sigma: IPr#HCl, 915653; Np#HCl; 915912; BIAN-IPr#HCl, 916420.

This work reports our discoveries from the first exploration in microwave pyrolysis of a metal–organic framework. A time- and energy-efficient approach was developed for direct fabrication of electrochemical single-atom catalysts (E-SACs) without the requirement of post-treatment. The most unique structure of the fabricated E-SAC is that the Cu catalytic sites were not in the amorphous carbon matrix as those achieved via traditional pyrolysis but in the basal planes of pristine holey graphene nanoplatelets. The as-prepared Cu-E-SAC exhibits excellent catalytic activity and selectivity in reducing oxygen to water in both acidic and alkaline media. The desired direct 4e– pathway is more favorable in acidic versus alkaline media, which is different from all the Cu-E-SACs reported so far and most transition-metal-based E-SACs. The superior performance is attributed to the unique structure of the catalytic sites. The large graphene domains in the holey graphene materials provide higher delocalized electron-rich π band and increase the d-orbital energy level of the Cu centers. Consequently, their binding strength for molecular oxygen is largely enhanced, improving the oxygen reduction reaction and likely promoting a direct 4e– pathway with minimized generation of a peroxide byproduct. Considering the high conductivity and excellent stability against oxidation of the holey graphene material, this work, for the first time, suggests that the contradictory structural requirement of a carbon matrix for high catalytic activity and long-term durability can be unified and simultaneously satisfied. Combined with the merits of simplicity and rapidness for fabricating both holey graphene and E-SACs, this work provides a possible strategy to address the critical challenges of precious metal-free single-atom catalysts.

Purpose This work investigated whether topical pain relief diclofenac gels can form a diclofenac reservoir in the epidermal and dermal layers of human skin. Methods Excised human skin samples were treated with three topical diclofenac gels ex vivo and examined using Raman microscopy of transversally microtomed sections. The relative diclofenac concentration in the skin layers was calculated as the ratio of the integrated areas of bands characteristic of diclofenac (~445 cm-1) and skin (Amide I). A customized masking algorithm ensured that only diclofenac-specific signal was mapped in the resulting Raman images. Results A heterogenous spatial distribution of diclofenac was clearly visible in both the epidermis and the dermis in all samples, with a markedly higher diclofenac relative content and number of pixels above the detection limit in the epidermis compared to the dermis. Conclusion The Raman images evidenced that the studied topical gels deliver diclofenac through the stratum corneum skin barrier and form a drug depot localized in the epidermis. The data are in line with earlier clinical findings that this depot acts like a true reservoir and enables sustained drug release.

BACKGROUND Skin hydration is essential for maintaining stratum corneum (SC) flexibility and facilitating maturation events. Moisturizers contain multiple ingredients to maintain and improve skin hydration although a complete understanding of hydration mechanisms is lacking. The ability to differentiate the source of the hydration (water from the environment or deeper skin regions) upon application of product will aid in designing more efficacious formulations. MATERIALS AND METHODS Novel confocal Raman microscopy (CRM) experiments allow us to investigate mechanisms and levels of hydration in the SC. Using deuterium oxide (D2 O) as a probe permits the differentiation of endogenous water (H2 O) from exogenous D2 O. Following topical application of D2 O, we first compare in vivo skin depth profiles with those obtained using ex vivo skin. Additional ex vivo experiments are conducted to quantify the kinetics of D2 O diffusion in the epidermis by introducing D2 O under the dermis. RESULTS Relative D2 O depth profiles from in vivo and ex vivo measurements compare well considering procedural and instrumental differences. Additional in vivo experiments where D2 O was applied following topical glycerin application increased the longevity of D2 O in the SC. Reproducible rates of D2 O diffusion as a function of depth have been established for experiments where D2 O is introduced under ex vivo skin. CONCLUSION Unique information regarding hydration mechanisms are obtained from CRM experiments using D2 O as a probe. The source and relative rates of hydration can be delineated using ex vivo skin with D2 O underneath. One can envision comparing these depth-dependent rates in the presence and absence of topically applied hydrating agents to obtain mechanistic information.

Introduction: As skin ages, it loses its ability to retain moisture and becomes rough and dry. This results in a clinically dull appearance with a loss of radiance, firmness, and suppleness. Symptoms can be improved with use of a moisturizer that builds and maintains skin hydration over time; however, most moisturizers that occlude the skin surface are perceived as heavy and greasy and are not consumer preferred. Methods: A unique, consumer-preferred gel matrix formula was developed by combining liquid crystal structures, which mimic skin barrier lipid assembly, with specific emulsifiers that deliver water deep into skin. Ex vivo studies were conducted to investigate the superior hydrating effects of the gel matrix formula. Confocal Raman microscopy studies assessed the spatial distribution of water in ex vivo skin after application of the gel matrix formula. To determine the effects of the gel matrix formula on dry facial skin, a 12-week clinical study was conducted with subjects with self-perceived skin dryness and dullness. Results: The formulation significantly increased the relative water content throughout epidermal regions, which was not observed with the application of a competitive gel formula. Instrumental measurements assessed improvements in skin surface moisturization and barrier function. Clinical grading showed significant improvements in hydration-related endpoints including radiance, clarity, and texture. Subject self-agree assessment demonstrated that subjects observed improvements in the appearance of their facial skin. Conclusion: These studies demonstrated that the gel matrix formula increased skin water content in deeper layers, and resulted in significant clinical improvements in hydration, barrier function, and clinical appearance of radiance.

Direct α-alkylation of carbonyl compounds represents a fundamental bond forming transformation in organic synthesis. We report the first ketone-alkylation using olefins and alcohols as simple alkylating agents catalyzed by graphene oxide. Extensive studies of the graphene surface suggest a pathway involving dual activation of both coupling partners. Notably, we show that polar functional groups have a stabilizing effect on the GO surface, which results in a net enhancement of the catalytic activity. The method represents the first alkylation of carbonyl compounds using graphenes, which opens the door for the development of an array of protocols for ketone functionalization employing common carbonyl building blocks and readily available graphenes.

Purpose This work investigated whether topical pain relief diclofenac gels can form a diclofenac reservoir in the epidermal and dermal layers of human skin. Methods Excised human skin samples were treated with three topical diclofenac gels ex vivo and examined using Raman microscopy of transversally microtomed sections. The relative diclofenac concentration in the skin layers was calculated as the ratio of the integrated areas of bands characteristic of diclofenac (~445 cm−1) and skin (Amide I). A customized masking algorithm ensured that only diclofenac-specific signal was mapped in the resulting Raman images. Results A heterogenous spatial distribution of diclofenac was clearly visible in both the epidermis and the dermis in all samples, with a markedly higher diclofenac relative content and number of pixels above the detection limit in the epidermis compared to the dermis. Conclusion The Raman images evidenced that the studied topical gels deliver diclofenac through the stratum corneum skin barrier and form a drug depot localized in the epidermis. The data are in line with earlier clinical findings that this depot acts like a true reservoir and enables sustained drug release.

Metal organic chemical vapor deposition grown films consisting of MgxZn1-xO (4%

Little is known about how stony corals build their calcareous skeletons. There are two prevailing hypotheses: that it is a physicochemically dominated process and that it is a biologically mediated one. Using a combination of ultrahigh-resolution three-dimensional imaging and two-dimensional solid-state nuclear magnetic resonance (NMR) spectroscopy, we show that mineral deposition is biologically driven. Randomly arranged, amorphous nanoparticles are initially deposited in microenvironments enriched in organic material; they then aggregate and form ordered aragonitic structures through crystal growth by particle attachment. Our NMR results are consistent with heterogeneous nucleation of the solid mineral phase driven by coral acid-rich proteins. Such a mechanism suggests that stony corals may be able to sustain calcification even under lower pH conditions that do not favor the inorganic precipitation of aragonite.

A highly porous graphitic carbon material, dually-doped with P and S, was studied as a metal free catalyst for aerobic oxidation reactions. Catalytic mechanism studies suggest that the active centers, originated from P-and S-doping, additively/synergistically catalyze the aerobic oxidation of benzylic alcohols but with different pathways. For the first time, catalytic centers stemming from S-doping were experimentally identified to be exocyclic S species (C-S-C, sulfur out of the carbon ring), which are different from those proposed for electrochemical oxygen reduction reactions (ORR) with a 4e− pathway and oxygen evaluation reactions (OER). Notably, all the catalytic sites from both P and S doping share a similar “protruding out” pyramid structure, which is in contrast to the planar structure of the catalytic sites in N- or B-doped graphitic materials. The unique geometric structure of the catalytic sites can minimize substrate steric hindrance effects, endowing the P, S co-doped catalysts with a wide substrate scope and functional group tolerance. Furthermore, the unambiguous distinguishment of the catalytic sites from those in OER and ORR provides valuable guidance for designing and developing carbon materials with controlled active sites to satisfy different catalytic applications.

During lactation, mammals resorb mineral from the maternal skeleton to provide calcium to milk. Rodents lose 25% to 35% of skeletal ash weight, ash calcium content, and bone mineral content as measured by dual-energy X-ray absorptiometry (DXA), and have compromised material properties of bone as assessed by crushing vertebrae and 3-point bend tests of femora or tibias. The strength, stiffness, and toughness of vertebrae, femora, and tibias are reduced by as much as 60%. The effects of lactation are not uniform throughout the skeleton, but instead resorption is much more marked in the trabecular-rich spine than in the appendicular skeleton or whole body. Women who breastfeed exclusively lose an average of 210 mg calcium in milk each day, whereas nursing of twins or triplets can double and triple the output of calcium. Clinical data are also consistent with skeletal calcium being released during lactation to provide much of the calcium needed for milk production. Lumbar spine bone mineral density (BMD), as assessed by DXA, declines by a mean of 5% to 10% among numerous studies during 3 to 6 months of exclusive lactation, whereas largely cortical sites (hip, forearm, whole body) show half that loss or no significant changes. Micro-CT of rodents and high-resolution peripheral quantitative computed tomography (HR-pQCT) imaging of women confirm that lactation causes microarchitectural deterioration of bone. These skeletal losses occur through two pathways: upregulated osteoclast-mediated bone resorption and osteocytic osteolysis, in which osteocytes remove mineral from their lacunae and pericanalicular spaces. After weaning, the skeleton is fully restored to its prior mineral content and strength in both animal models and humans, despite persistent microarchitectural changes observed in high-resolution imaging. Osteoblasts upregulate to lay down new osteoid, while osteocytes remineralize their surroundings. The factors that stimulate this post-weaning skeletal recovery remain unclear. In most studies, a history of lactation does not increase the risk, but may protect against, low BMD and fragility fractures. © 2017 American Society for Bone and Mineral Research.

Transition-metal-catalyzed alkylation reactions of arenes have become a central transformation in organic synthesis. Herein, we report the first general strategy for alkylation of arenes with styrenes and alcohols catalyzed by carbon-based materials, exploiting the unique property of graphenes to produce valuable diarylalkane products in high yields and excellent regioselectivity. The protocol is characterized by a wide substrate scope and excellent functional group tolerance. Notably, this process constitutes the first general application of graphenes to promote direct C-C bond formation utilizing polar functional groups anchored on the GO surface, thus opening the door for an array of functional group alkylations using benign and readily available graphene materials. Mechanistic studies suggest that the reaction proceeds via a tandem catalysis mechanism in which both of the coupling partners are activated by interaction with the GO surface.

Terbinafine (Tbf) is a well-established anti-fungal agent used for management of a variety of dermal conditions including ringworm and athlete's foot. Both the biochemical mechanism of Tbf fungicidal action (based on squalene epoxidase inhibition) and the target region for Tbf in vivo (the stratum corneum (SC)) are well determined. However, the biochemical and pharmacokinetic approaches used to evaluate Tbf biochemistry provide no biophysical information about molecular level physical changes in the SC upon Tbf binding. Such information is necessary for improved drug and formulation design. IR spectroscopic methods were used to evaluate the effects of Tbf on keratin structure in environments commonly used in pharmaceutics to mimic those in vivo. The Amide I and II spectral regions (1500–1700 cm−1) provided an effective means to monitor keratin secondary structure changes, while a Tbf spectral feature near 775 cm−1 provides a measure of relative Tbf levels in skin. Interaction of Tbf with the SC induced substantial β-sheet formation in the keratin, an effect which was partially reversed both by ethanol washing and by exposure to high relative humidity. The irreversibility suggests the presence of a Tbf reservoir (consistent with kinetic studies), permitting the drug to be released in a controlled manner into the surrounding tissue.

Bone is a highly organized tissue in which each structural level influences the macroscopic and microscopic mechanical behavior. In particular, the quantity, quality, and distribution of the different bone components, i.e. collagen matrix and hydroxyapatite crystals, are associated with bone strength or fragility. Common spectroscopic techniques used to assess bone composition have resolutions limited to the micrometer range. In this study, our aims were two-fold: i) to develop and validate the AFM-IR methodology for skeletal tissues and ii) to apply the methodology to sheep cancellous bone with the objective to obtain novel findings on the composition and structure of trabecular packets.To develop the methodology, we assessed spatial and temporal reproducibility using a known homogeneous material (polymethylmethacrylate, PMMA). We verified that the major peak positions were similar and not shifted when compared to traditional Fourier Transform Infrared imaging (FTIRI). When AFM-IR was applied to sheep cancellous bone, the mineral-to-matrix ratio increased and the acid phosphate substitution ratio decreased as a function of tissue maturity. The resolution of the technique enabled visualization of different stages of the bone maturation process, particularly newly-formed osteoid prior to mineralization. We also observed alternating patterns of IR parameters in line and imaging measurements, suggesting the apposition of layers of alternating structure and / or composition that were not visible with traditional spectroscopic methods. In conclusion, nanoscale IR spectroscopy demonstrates novel compositional and structural changes within trabecular packets in cancellous bone. Based on these results, AFM-IR is a valuable tool to investigate cancellous bone at the nanoscale and, more generally, to analyze small dynamic areas that are invisible to traditional spectroscopic methods.

The main barrier to permeability in human skin resides in the stratum corneum (SC), a layered structure consisting of anucleated, flattened cells (corneocytes) embedded in a heterogeneous lamellar lipid matrix. While lipid structures and packing propensities in the SC and in SC models have been extensively investigated, only limited data are available concerning the kinetics and mechanism of formation of lamellar phases and particular lipid packing motifs. In our prior investigation, kinetic IR spectroscopy measurements probed the temporal sequence of phase separation leading to ordered structures in a three component SC model of equimolar structurally heterogeneous ceramide[NS], chain perdeuterated stearic acid, and cholesterol. In the current work, the phase separation kinetic effects of specific fatty acid chain lengths with a synthetic structurally homogeneous ceramide[NS] in similar ternary mixtures are examined. These are compared with a mixture containing ceramide[NS] with an unsaturated acid chain. The kinetic events are sensitive to the difference in chain lengths between the ceramide acid chain and the fatty acid as well as to the presence of unsaturation in the former. The observed kinetic behaviors span a wide range of phase separation times, ranging from the formation of a solid solution stable for at least 200 h, to a system in which an orthorhombic fatty acid structure is essentially completely formed within the time resolution of the experiment (15 min). The data seem to offer some features of a spinodal phase separation at relatively short times. Overall the approach offers a possible means for addressing several unanswered questions pertinent to skin pharmacology, such as the roles of a wide variety of ceramide and fatty acid species and the design of therapeutic interventions for repair of pathological conditions of the SC.

A variety of strategies for the synthesis of solution processable graphene sheets has been developed so far. However, no approach has been reported to directly produce highly conductive, low-oxygen-containing graphene sheets without relying on toxic reagents and metal containing compounds and without generating toxic by-products. With an aim of developing such an eco-friendly approach, for the first time, this work studied solution phase oxidation of graphite particles and reversible graphite intercalation compounds using molecular oxygen and piranha etching solutions. We found that the synergy of the piranha etching solution and the intercalated molecular oxygen enables controlled oxidation of graphite particles assisted by microwave heating. The controlled oxidation leads to the rapid and direct generation of highly conductive, “clean”, and low oxygen containing graphene sheets without releasing toxic gases or aromatic by-products as detected by gas chromatography-mass spectrometry (GC-MS). These highly conductive graphene sheets have unique molecular structures, different from both graphene oxide and pristine graphene sheets. It is even different from chemically reduced graphene oxide, while combining many of its merits. They can be dispersed in both aqueous and common organic solvents without surfactants/stabilizers, producing “clean” solution phase graphene sheets. “Paper-like” graphene films are generated via simple filtration, resulting in films with a conductivity of 2.3 × 104 S m−1, the highest conductivity observed so far for graphene films assembled via vacuum filtration from solution processable graphene sheets. After 2 hours of low temperature annealing at 300 °C, the conductivity further increased to 7.4 × 104 S m−1. This eco-friendly and rapid approach for the production of highly conductive and “clean” solution-phase graphene sheets would enable a broad spectrum of applications at low cost.

Acne vulgaris is a disease of pilosebaceous units with multifactorial pathogenesis, including hyperkeratinization, increased sebum secretion, and inflammation. Recently, it was suggested that acne subjects may have also impaired skin barrier. We hypothesized that excess unsaturated free fatty acids (UFFA) present in the sebum may cause barrier impairment associated with increased follicular stratum corneum (SC) thickening and inflammation seen in acne. Therefore, epidermal and sebaceous lipid profiles from acne and healthy subjects were analyzed and an in vitro epidermal tissue model was developed to validate this hypothesis. Significantly increased levels of free fatty acids (p

Transition-metal-catalyzed alkylation reactions of arenes have become a central transformation in organic synthesis. Herein, we report the first general strategy for alkylation of arenes with styrenes and alcohols catalyzed by carbon-based materials, exploiting the unique property of graphenes to produce valuable diarylalkane products in high yields and excellent regioselectivity. The protocol is characterized by a wide substrate scope and excellent functional group tolerance. Notably, this process constitutes the first general application of graphenes to promote direct C–C bond formation utilizing polar functional groups anchored on the GO surface, thus opening the door for an array of functional group alkylations using benign and readily available graphene materials. Mechanistic studies suggest that the reaction proceeds via a tandem catalysis mechanism in which both of the coupling partners are activated by interaction with the GO surface.

An extremely simple and rapid (seconds) approach is reported to directly synthesize gram quantities of P-doped graphitic porous carbon materials with controlled P bond configuration. For the first time, it is demonstrated that the P-doped carbon materials can be used as a selective metal free catalyst for aerobic oxidation reactions. The work function of P-doped carbon materials, its connectivity to the P bond configuration, and the correlation with its catalytic efficiency are studied and established. In direct contrast to N-doped graphene, the P-doped carbon materials with higher work function show high activity in catalytic aerobic oxidation. The selectivity trend for the electron donating and withdrawing properties of the functional groups attached to the aromatic ring of benzylic alcohols is also different from other metal free carbon based catalysts. A unique catalytic mechanism is demonstrated, which differs from both GO and N-doped graphene obtained by high temperature nitrification. The unique and unexpected catalytic pathway endows the P-doped materials with not only good catalytic efficiency but also recyclability. This, combined with a rapid, energy saving approach that permits fabrication on a large scale, suggests that the P-doped porous materials are promising materials for “green catalysis” due to their higher theoretical surface area, sustainability, environmental friendliness and low cost.

For effective topical delivery, a drug must cross the stratum corneum (SC) barrier into viable tissue. The use of permeation enhancers is a widespread approach for barrier modification. In the current study, flufenamic acid (FluA), a non-steroidal anti-inflammatory drug, is a model agent for investigating the influence of hydrophobic versus hydrophilic enhancers. In separate experiments, FluA in octanol or propylene glycol/ethanol (75/25) is applied to the SC for varying times followed by confocal Raman microscopic mapping of drug and enhancer penetration and spatial distribution. Deuterated versions of the enhancers permit us to spectroscopically distinguish the exogenous chemicals from the endogenous SC lipids without affecting penetration parameters. The FluA pathway is tracked by the CC stretching mode at ∼1618cm(-1). Discrete, small inclusions of both enhancers are observed throughout the SC. High concentrations of FluA are co-localized with octanol domains which appear to provide a pathway to the viable epidermis for the drug. In contrast, FluA concentrates in the upper SC when using the hydrophilic agent and endogenous lipids appear unperturbed in regions outside the enhancer pockets. The ability to examine perturbations to endogenous ultrastructure and molecular structure in skin while tracking penetration pathways provides insight into delivery mechanisms.

Recent technological advances have led to an increase in the use of confocal Raman microscopy to tackle biophysical and pharmacological issues in topical delivery and dermatology. Advantages of the technique include the ability to optically section intact, full thickness skin without the need to microtome or otherwise physically segment the skin. In addition, both exogenous agents and perturbations to endogenous structure can be monitored without the introduction of probe molecules. In the current work, flufenamic acid (FluA), a non-steroidal anti-inflammatory drug, is a model agent for investigating the influence of lipophilic versus hydrophilic penetration enhancers on the outer barrier layer of skin. For topical delivery to be effective, a drug must cross the stratum corneum (SC) barrier into viable tissue. In separate experiments, FluA in octanol or propylene glycol/ethanol (75/25) is applied to skin for varying times followed by confocal Raman microscopic mapping of drug and enhancer spatial distribution. The FluA pathway is tracked by the C=C stretching mode at 1618 cm−1. The exogenous enhancers are spectroscopically differentiated from the endogenous lipids by utilizing deuterated versions of the enhancers which do not affect penetration parameters. Discrete pockets (5-20 μm) of both enhancers are observed throughout the SC. High concentrations of FluA are co-localized with octanol inclusions which appear to provide a pathway to the viable epidermis for the drug. In contrast, FluA concentrates in the upper SC when using the hydrophilic agent and endogenous lipids are unperturbed in regions outside the enhancer pockets. The ability to examine perturbations to endogenous ultrastructure and molecular structure in skin while tracking penetration pathways provides insight into delivery mechanisms.

Metabolic bone diseases manifesting fragility fractures (such as osteoporosis) are routinely diagnosed based on bone mineral density (BMD) measurements, and the effect of various therapies also evaluated based on the same outcome. Although useful, it is well recognized that this metric does not fully account for either fracture incidence or the effect of various therapies on fracture incidence, thus, the emergence of bone quality as a contributing factor in the determination of bone strength. Infrared and Raman vibrational spectroscopic techniques are particularly well-suited for the determination of bone quality as they provide quantitative and qualitative information of the mineral and organic matrix bone components, simultaneously. Through the use of microspectroscopic techniques, this information is available in a spatially resolved manner, thus, the outcomes may be easily correlated with outcomes from techniques such as histology, histomorphometry, and nanoindentation, linking metabolic status with material properties.

The unique properties of holey graphene sheet, referred to graphene sheet with nanoholes in its basal plane, lead to wide range of applications, which cannot be achieved by its nonporous counterpart. However, its large scale solution based production requires graphene oxide (GO) or reduced GO (rGO) as starting materials, which take hours to days for their fabrication. Here, we report our unexpected discovery that GO with or without holes can be controllably, directly, and rapidly (tens of seconds) fabricated from graphite powder via a one-step-one-pot microwave assisted reaction with a production yield of 120 wt% of graphite. Furthermore, a fast and low temperature approach is developed for simultaneous nitrogen (N) doping and reduction of GO sheets. The N-doped holey rGO sheets demonstrate remarkable electrocatalytic capabilities toward electrochemical oxygen reduction reaction. The existence of the nanoholes not only provides a “short cut” for efficient mass transport, but also dramatically increases edges and surface area, therefore, creates more catalytic centers. The capability of rapid fabrication and N-doping as well as reduction of holey GO can lead us to develop efficient catalyst, which can replace previous coin metals for energy generation and storage, such as fuel cells and metal–air batteries

Qihong Zhang,1 Carol R Flach,1 Richard Mendelsohn,1 Guangru Mao,2 Apostolos Pappas,2 M Catherine Mack,2 Russel M Walters,2 Michael D Southall2 1Department of Chemistry, Rutgers University, Newark, 2Johnson & Johnson Consumer Companies, Inc., Skillman, NJ, USAAbstract: Ceramides (CERs), structural components of the stratum corneum (SC), impart essential barrier properties to this thin outer layer of the epidermis. Variations in CER species within this layer have been linked to several skin diseases. A recent proliferation of CER-containing topical skin-care products warrants the elucidation of CER penetration profiles in both healthy and diseased skin. In the current study, the spatial distributions of CER concentration profiles, following topical application of two species of CER, were tracked using infrared imaging. Suspensions of single-chain perdeuterated sphingosine and phytosphingosine CER in oleic acid were applied, in separate experiments, to the surface of healthy intact ex vivo human skin using Franz diffusion cells. Following either a 24- or 48-hour incubation period at 34°C, infrared images were acquired from microtomed skin sections. Both CER species accumulated in glyph regions of the skin and penetrated into the SC, to a limited extent, only in these regions. The concentration profiles observed herein were independent of the CER species and incubation time utilized in the study. As a result, a very heterogeneous, sparse, spatial distribution of CERs in the SC was revealed. In contrast, oleic acid was found to be fairly homogeneously distributed throughout the SC and viable epidermis, albeit at lower concentrations in the latter. A more uniform, lateral distribution of CERs in the SC would likely be important for barrier efficacy or enhancement.Keywords: stratum corneum, infrared imaging, topical delivery, oleic acid