Search

We genotyped a population of 618 diploid potato clones derived from six independent potato-breeding programmes from NW-Europe. The diploids were phenotyped for 23 traits, using standardized protocols and common check varieties, enabling us to derive whole population estimators for most traits. We subsequently performed a genome-wide association study (GWAS) to identify quantitative trait loci (QTL) for all traits with SNPs and short-read haplotypes derived from read-backed phasing. In this study, we used a marker platform called PotatoMASH (Potato Multi-Allele Scanning Haplotags); a pooled multiplex amplicon sequencing based approach. Through this method, neighboring SNPs within an amplicon can be combined to generate multiallelic short-read haplotypes (haplotags) that capture recombination history between the constituent SNPs and reflect the allelic diversity of a given locus in a different way than single bi-allelic SNPs. We found a total of 37 unique QTL across both marker types. A core of 10 QTL was detected with SNPs as well as with haplotags. Haplotags allowed to detect an additional 14 QTL not found based on the SNP set. Conversely, the bi-allelic SNP set also found 13 QTL not detectable using the haplotag set. We conclude that both marker types should routinely be used in parallel to maximize the QTL detection power. We report 19 novel QTL for nine traits: Skin Smoothness, Sprout Dormancy, Total Tuber Number, Tuber Length, Yield, Chipping Color, After-cooking Blackening, Cooking Type, and Eye depth., Competing Interests: Conflicts of interest The authors are not aware of any affiliations, memberships, funding, or financial holdings that might be perceived as affecting the objectivity of this publication., (© The Author(s) 2024. Published by Oxford University Press on behalf of The Genetics Society of America.)

Garden roses are an economically important horticultural crop worldwide, and two major fungal pathogens, black spot (Diplocarpon rosae F.A. Wolf) and cercospora leaf spot of rose (Rosisphaerella rosicola Pass.), affect both the health and ornamental value of the plant. Most studies on black spot disease resistance have focused on diploid germplasm, and little work has been performed on cercospora leaf spot resistance. With the use of newly developed software tools for autopolyploid genetics, two interconnected tetraploid garden rose F1 populations (phenotyped over the course of 3 years) were used for quantitative trait locus (QTL) analysis of black spot and cercospora leaf spot resistance as well as plant defoliation. QTLs for black spot resistance were mapped to linkage groups (LGs) 1–6. QTLs for cercospora resistance and susceptibility were found in LGs 1, 4, and 5 and for defoliation in LGs 1, 3, and 5. The major locus on LG 5 for black spot resistance coincides with the previously discovered Rdr4 locus inherited from Rosa L. ‘Radbrite’ (Brite Eyes™), the common parent used in these mapping populations. This work is the first report of any QTL for cercospora resistance/susceptibility in tetraploid rose germplasm and the first report of defoliation QTL in roses. A major QTL for cercospora susceptibility coincides with the black spot resistance QTL on LG 5 (Rdr4). A major cercospora resistance QTL was found on LG 1. These populations provide a genetic resource that will further the knowledge base of rose genetics as more traits are studied. Studying more traits from these populations will allow for the stacking of various QTLs for desirable traits.

Fusarium head blight (FHB) is a global wheat disease that devastates wheat production. Resistance to FHB spread within a wheat spike (type II resistance) and to mycotoxin accumulation in infected kernel (type III resistance) are the two main types of resistance. Of hundreds of QTL that have been reported, only a few can be used in wheat breeding because most show minor and/or inconsistent effects in different genetic backgrounds. We describe a new strategy for identifying robust and reliable meta-QTL (mQTL) that can be used for improvement of wheat FHB resistance. It involves integration of mQTL analysis with mQTL physical mapping and identification of single-copy markers and candidate genes. Using meta-analysis, we consolidated 625 original QTL from 113 publications into 118 genetic map-based mQTL (gmQTL). These gmQTL were further located on the Chinese Spring reference sequence map. Finally, 77 high-confidence mQTL (hcmQTL) were selected from the reference sequence-based mQTL (smQTL). Locus-specific single nucleotide polymorphism (SNP) and simple sequence repeat (SSR) markers and 17 genes responsive to FHB were then identified in the hcmQTL intervals by combined analysis of transcriptomic and proteomic data. This work may lead to a comprehensive molecular breeding platform for improving wheat resistance to FHB.

Abstract Cassava is an important staple in Sub-Sahara Africa. While its production has rapidly expanded to the dry savannahs of the continent, productivity is low in this ecology due to drought by farmers, extending the growth cycle from 12 months to 18, and sometimes 24 months to ensure better harvests. Yield is a complex trait and often difficult to manipulate for genetic gain in conventional breeding. Unfortunately, the dearth of molecular tools for decades has hampered molecular breeding (MB) to improve cassava productivity. This study was conducted to explore KASpar SNPs to generate more molecular tools to enhance genetic dissection of elite African germplasm for improved cassava productivity in dry environments of Africa where molecular resources are highly limited for crop improvement. To aid molecular genetic analysis of traits, a linkage map covering 1582.8 cM with an average resolution of 3.69 cM was constructed using 505 polymorphic SNP markers distributed over 21 linkage groups. Composite interval mapping using 267 F1 progeny in initial QTL mapping identified 27 QTLs for productivity traits in the dry savannah of Nigeria. The availability of KASPar SNPs are anticipated to improve the implementation of MB for the development of high performing drought-tolerant cassava varieties in Africa.

Garden roses are an economically important horticultural crop worldwide, and two major fungal pathogens, black spot ( Diplocarpon rosae F.A. Wolf) and cercospora leaf spot of rose ( Rosisphaerella rosicola Pass.), affect both the health and ornamental value of the plant. Most studies on black spot disease resistance have focused on diploid germplasm, and little work has been performed on cercospora leaf spot resistance. With the use of newly developed software tools for autopolyploid genetics, two interconnected tetraploid garden rose F 1 populations (phenotyped over the course of 3 years) were used for quantitative trait locus (QTL) analysis of black spot and cercospora leaf spot resistance as well as plant defoliation. QTLs for black spot resistance were mapped to linkage groups (LGs) 1-6. QTLs for cercospora resistance and susceptibility were found in LGs 1, 4, and 5 and for defoliation in LGs 1, 3, and 5. The major locus on LG 5 for black spot resistance coincides with the previously discovered Rdr4 locus inherited from Rosa L. 'Radbrite' (Brite Eyes™), the common parent used in these mapping populations. This work is the first report of any QTL for cercospora resistance/susceptibility in tetraploid rose germplasm and the first report of defoliation QTL in roses. A major QTL for cercospora susceptibility coincides with the black spot resistance QTL on LG 5 ( Rdr4 ). A major cercospora resistance QTL was found on LG 1. These populations provide a genetic resource that will further the knowledge base of rose genetics as more traits are studied. Studying more traits from these populations will allow for the stacking of various QTLs for desirable traits., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Lau, Gill, Taniguti, Young, Klein, Byrne and Riera-Lizarazu.)

Summary: Genotype-to-phenotype association studies typically use macroscopic physiological measurements or molecular readouts as quantitative traits. There are comparatively few suitable quantitative traits available between cell and tissue length scales, a limitation that hinders our ability to identify variants affecting phenotype at many clinically informative levels. Here we show that quantitative image features, automatically extracted from histopathological imaging data, can be used for image quantitative trait loci (iQTLs) mapping and variant discovery. Using thyroid pathology images, clinical metadata, and genomics data from the Genotype-Tissue Expression (GTEx) project, we establish and validate a quantitative imaging biomarker for immune cell infiltration. A total of 100,215 variants were selected for iQTL profiling and tested for genotype-phenotype associations with our quantitative imaging biomarker. Significant associations were found in HDAC9 and TXNDC5. We validated the TXNDC5 association using GTEx cis-expression QTL data and an independent hypothyroidism dataset from the Electronic Medical Records and Genomics network. : Pathology; Bioinformatics; Computational Bioinformatics; Association Analysis Subject Areas: Pathology, Bioinformatics, Computational Bioinformatics, Association Analysis

Analysis of molecular quantitative trait loci (molQTL) can help interpret genome-wide association studies and requires efficient approaches to correct for multiple testing. This study describes a bioinformatics toolkit called QTLtool that can handle large data sets and quickly perform multiple types of molQTL analyses.

Common bean (Phaseolus vulgaris L.) is one of the most important grain legume crops in the world. The beans grown in north-western Himalayas possess huge diversity for seed color, shape and size but are mostly susceptible to Anthracnose disease caused by seed born fungus Colletotrichum lindemuthianum. Dozens of QTLs/genes have been already identified for this disease in common bean world-wide. However, this is the first report of gene/QTL discovery for Anthracnose using bean germplasm from north-western Himalayas of state Jammu & Kashmir, India. A core set of 96 bean lines comprising 54 indigenous local landraces from 11 hot-spots and 42 exotic lines from 10 different countries were phenotyped at two locations (SKUAST-Jammu and Bhaderwah, Jammu) for Anthracnose resistance. The core set was also genotyped with genome-wide (91) random and trait linked SSR markers. The study of marker-trait associations (MTAs) led to the identification of 10 QTLs/genes for Anthracnose resistance. Among the 10 QTLs/genes identified, two MTAs are stable (BM45 & BM211), two MTAs (PVctt1 & BM211) are major explaining more than 20% phenotypic variation for Anthracnose and one MTA (BM211) is both stable and major. Six (06) genomic regions are reported for the first time, while as four (04) genomic regions validated the already known QTL/gene regions/clusters for Anthracnose. The major, stable and validated markers reported during the present study associated with Anthracnose resistance will prove useful in common bean molecular breeding programs aimed at enhancing Anthracnose resistance of local bean landraces grown in north-western Himalayas of state Jammu and Kashmir.

Limited understanding of sweet basil (Ocimum basilicum L.) genetics and genome structure has reduced efficiency of breeding strategies. This is evidenced by the rapid, worldwide dissemination of basil downy mildew (Peronospora belbahrii) in the absence of resistant cultivars. In an effort to improve available genetic resources, expressed sequence tag simple sequence repeat (EST-SSR) and single nucleotide polymorphism (SNP) markers were developed and used to genotype the MRI x SB22 F2 mapping population, which segregates for response to downy mildew. SNP markers were generated from genomic sequences derived from double digestion restriction site associated DNA sequencing (ddRADseq). Disomic segregation was observed in both SNP and EST-SSR markers providing evidence of an O. basilicum allotetraploid genome structure and allowing for subsequent analysis of the mapping population as a diploid intercross. A dense linkage map was constructed using 42 EST-SSR and 1,847 SNP markers spanning 3,030.9 cM. Multiple quantitative trait loci (QTL) model (MQM) analysis identified three QTL that explained 37-55% of phenotypic variance associated with downy mildew response across three environments. A single major QTL, dm11.1 explained 21-28% of phenotypic variance and demonstrated dominant gene action. Two minor QTL dm9.1 and dm14.1 explained 5-16% and 4-18% of phenotypic variance, respectively. Evidence is provided for an additive effect between the two minor QTL and the major QTL dm11.1 increasing downy mildew susceptibility. Results indicate that ddRADseq-facilitated SNP and SSR marker genotyping is an effective approach for mapping the sweet basil genome.

Much of the cost associated with marker discovery for marker assisted breeding (MAB) can be eliminated if a diverse, segregating population is generated, genotyped and made available to the global breeding community. Herein, we present an example of a hybrid, wild-derived family of the octoploid strawberry that can be used by other breeding programs to economically find and tag useful genes for MAB. A pseudo test cross population between two wild species of F. virginiana and F chiloensis (FVC 11) was generated and evaluated for a set of phenotypic traits. A total of 106 individuals in the FVC 11 were genotyped for 29,251 single nucleotide polymorphisms (SNPs) utilizing a commercially available, genome-wide scanning platform (Affymetrix Axiom IStraw90TW). The marker trait associations were deduced using TASSEL software. The FVC 11 population segregating for daughters per mother, inflorescence number, inflorescence height, crown production, flower number, fruit size, yield, internal color, soluble solids, fruit firmness, and plant vigor. Coefficients of variations ranged from 10 % for fruit firmness to 68 % for daughters per mother. A total of 2,474 SNPs were found to be polymorphic in FVC 11 and strong marker trait associations were observed for vigor, daughters per mother, yield and fruit weight. These data indicate that FVC 11 can be used as a reference population for quantitative trait loci (QTL) detection and subsequent MAB across different breeding programs and geographical locations.

Common bean (Phaseolus vulgaris L.) is one of the most important grain legume crops in the world. The beans grown in north-western Himalayas possess huge diversity for seed color, shape and size but are mostly susceptible to Anthracnose disease caused by seed born fungus Colletotrichum lindemuthianum. Dozens of QTLs/genes have been already identified for this disease in common bean world-wide. However, this is the first report of gene/QTL discovery for Anthracnose using bean germplasm from north-western Himalayas of state Jammu & Kashmir, India. A core set of 96 bean lines comprising 54 indigenous local landraces from 11 hot-spots and 42 exotic lines from 10 different countries were phenotyped at two locations (SKUAST-Jammu and Bhaderwah, Jammu) for Anthracnose resistance. The core set was also genotyped with genome-wide (91) random and trait linked SSR markers. The study of marker-trait associations (MTAs) led to the identification of 10 QTLs/genes for Anthracnose resistance. Among the 10 QTLs/genes identified, two MTAs are stable (BM45 & BM211), two MTAs (PVctt1 & BM211) are major explaining more than 20% phenotypic variation for Anthracnose and one MTA (BM211) is both stable and major. Six (06) genomic regions are reported for the first time, while as four (04) genomic regions validated the already known QTL/gene regions/clusters for Anthracnose. The major, stable and validated markers reported during the present study associated with Anthracnose resistance will prove useful in common bean molecular breeding programs aimed at enhancing Anthracnose resistance of local bean landraces grown in north-western Himalayas of state Jammu and Kashmir. [ABSTRACT FROM AUTHOR]

Limited understanding of sweet basil (Ocimum basilicum L.) genetics and genome structure has reduced efficiency of breeding strategies. This is evidenced by the rapid, worldwide dissemination of basil downy mildew (Peronospora belbahrii) in the absence of resistant cultivars. In an effort to improve available genetic resources, expressed sequence tag simple sequence repeat (EST-SSR) and single nucleotide polymorphism (SNP) markers were developed and used to genotype the MRI x SB22 F2 mapping population, which segregates for response to downy mildew. SNP markers were generated from genomic sequences derived from double digestion restriction site associated DNA sequencing (ddRADseq). Disomic segregation was observed in both SNP and EST-SSR markers providing evidence of an O. basilicum allotetraploid genome structure and allowing for subsequent analysis of the mapping population as a diploid intercross. A dense linkage map was constructed using 42 EST-SSR and 1,847 SNP markers spanning 3,030.9 cM. Multiple quantitative trait loci (QTL) model (MQM) analysis identified three QTL that explained 37-55% of phenotypic variance associated with downy mildew response across three environments. A single major QTL, dm11.1 explained 21-28% of phenotypic variance and demonstrated dominant gene action. Two minor QTL dm9.1 and dm14.1 explained 5-16% and 4-18% of phenotypic variance, respectively. Evidence is provided for an additive effect between the two minor QTL and the major QTL dm11.1 increasing downy mildew susceptibility. Results indicate that ddRADseq-facilitated SNP and SSR marker genotyping is an effective approach for mapping the sweet basil genome.

Population scale studies combining genetic information with molecular phenotypes (for example, gene expression) have become a standard to dissect the effects of genetic variants onto organismal phenotypes. These kinds of data sets require powerful, fast and versatile methods able to discover molecular Quantitative Trait Loci (molQTL). Here we propose such a solution, QTLtools, a modular framework that contains multiple new and well-established methods to prepare the data, to discover proximal and distal molQTLs and, finally, to integrate them with GWAS variants and functional annotations of the genome. We demonstrate its utility by performing a complete expression QTL study in a few easy-to-perform steps. QTLtools is open source and available at https://qtltools.github.io/qtltools/.

Background: Dense SNP genotypes are often combined with complex trait phenotypes to map causal variants, study genetic architecture and provide genomic predictions for individuals with genotypes but no phenotype. A single method of analysis that jointly fits all genotypes in a Bayesian mixture model (BayesR) has been shown to competitively address all 3 purposes simultaneously. However, BayesR and other similar methods ignore prior biological knowledge and assume all genotypes are equally likely to affect the trait. While this assumption is reasonable for SNP array genotypes, it is less sensible if genotypes are whole-genome sequence variants which should include causal variants. Results: We introduce a new method (BayesRC) based on BayesR that incorporates prior biological information in the analysis by defining classes of variants likely to be enriched for causal mutations. The information can be derived from a range of sources, including variant annotation, candidate gene lists and known causal variants. This information is then incorporated objectively in the analysis based on evidence of enrichment in the data. We demonstrate the increased power of BayesRC compared to BayesR using real dairy cattle genotypes with simulated phenotypes. The genotypes were imputed whole-genome sequence variants in coding regions combined with dense SNP markers. BayesRC increased the power to detect causal variants and increased the accuracy of genomic prediction. The relative improvement for genomic prediction was most apparent in validation populations that were not closely related to the reference population. We also applied BayesRC to real milk production phenotypes in dairy cattle using independent biological priors from gene expression analyses. Although current biological knowledge of which genes and variants affect milk production is still very incomplete, our results suggest that the new BayesRC method was equal to or more powerful than BayesR for detecting candidate causal variants and for genomic prediction of milk traits. Conclusions: BayesRC provides a novel and flexible approach to simultaneously improving the accuracy of QTL discovery and genomic prediction by taking advantage of prior biological knowledge. Approaches such as BayesRC will become increasing useful as biological knowledge accumulates regarding functional regions of the genome for a range of traits and species. [ABSTRACT FROM AUTHOR]

Much of the cost associated with marker discovery for marker assisted breeding (MAB) can be eliminated if a diverse, segregating population is generated, genotyped, and made available to the global breeding community. Herein, we present an example of a hybrid, wild-derived family of the octoploid strawberry that can be used by other breeding programs to economically find and tag useful genes for MAB. A pseudo test cross population between two wild species of Fragaria virginiana and F. chiloensis (FVC 11) was generated and evaluated for a set of phenotypic traits. A total of 106 individuals in the FVC 11 were genotyped for 29,251 single nucleotide polymorphisms (SNPs) utilizing a commercially available, genome-wide scanning platform (Affymetrix Axiom IStraw90(TW)). The marker trait associations were deduced using TASSEL software. The FVC 11 population segregating for daughters per mother, inflorescence number, inflorescence height, crown production, flower number, fruit size, yield, internal color, soluble solids, fruit firmness, and plant vigor. Coefficients of variations ranged from 10% for fruit firmness to 68% for daughters per mother, indicating an underlying quantitative inheritance for each trait. A total of 2,474 SNPs were found to be polymorphic in FVC 11 and strong marker trait associations were observed for vigor, daughters per mother, yield and fruit weight. These data indicate that FVC 11 can be used as a reference population for quantitative trait loci detection and subsequent MAB across different breeding programs and geographical locations.