Search

Interfacial bonding between fibre and matrix is most critical to obtain enhanced mechanical properties of the resulting composites. Here we present a new surface tailoring method of selective wet etching and organosilicon monomers (3-(Trimethoxysilyl) propyl methacrylate, TMSPMA) deposition process on the short S-Glass fibre as a reinforcing material, resulting in increased mechanical retention and strong chemical bonding between glass fibres and polymer resin (a mixture of triethylene glycol dimethacrylate (TEGDMA) and urethane dimethacrylate (UDMA) monomers). The effect of surface modification on fibre matrix interfacial strength was investigated through microdroplet tests. An S-Glass fibre treated with piranha solution (a mixture of H2O2 and H2SO4) for 24 hours followed by TMSPMA surface silanization shows highest increase up to 39.6% in interfacial shear strength (IFSS), and critical fibre length could be reduced from 916.0 µm to 432.5 µm. We find the optimal surface treatment condition in that the flexural strength of dental composites reinforced by the S-Glass fibres enhanced up to 22.3% compared to the composites without fibre surface treatments. The significant elevation in strength is attributed to changes in the surface roughness of glass fibres at atomic scale, specifically by providing the multiplied spots of the chemical bridge and nano-mechanical interlocking. The findings offer a new strategy for advanced tailoring of short S-Glass fibres to maximise the mechanical properties of biomedical and dental composites.

Traditional polymerisation shrinkage (PS) measurement systems measure average PS of dental composites, but the true local PS varies along the length and breadth of the composite. The PS depends on the curing light intensity distribution, resultant degree of conversion (DOC) and the curing rate. In this paper, optical fibre Bragg grating (FBG) sensing based technology is used to measure the linear post-gel PS at multiple locations within dental composite specimens, and is correlated with DOC and curing rate. A commercial dental composite is used, and its post-gel PS and DOC are mapped using embedded fibre Bragg grating sensors at different curing conditions. The distance between the curing lamp and the composite specimen is varied which resulted in different intensity distribution across the specimen. The effect of curing light intensity distribution on PS, curing rate and DOC are investigated for demonstrating a relationship among them. It is demonstrated that FBG sensing method is an effective method to accurately profiling post-gel PS across the specimen.

The increasing use of sandwich composites for structural applications brings with it a need to establish a reliable inspection and monitoring method to ensure structural integrity and safe operation throughout the service life. Since optical fibre-based photonic sensing technologies are increasingly common for structural health monitoring of composite structures, selection of optical fibre Bragg grating sensors could be one possible choice for this purpose. In this paper, performance characterisation of sandwich composite with embedded silica fibre Bragg grating sensor is reported. Experimental tests were performed on a carbon fibre foam core sandwich composite embedded with a silica fibre Bragg grating sensor to extract the structural health monitoring parameters such as strain and temperature. The current study found that sandwich composite exhibits foam relaxation; however, its impact on strain measurement is negligible. Another important finding from the theoretical and the experimental thermal modelling was that although the constituent components of the sandwich composite have entirely different thermal expansion coefficients, its effect on the embedded fibre sensor can be minimal if the sensors are embedded between the face sheets. These results can initiate further research in this area and can lead to the development of state-of-the art structural health monitoring techniques for sandwich composite structures.

The characterization of the physical properties of dental resin composites is fraught with difficulties relating to significant intra and inter test parameter variabilities and is relatively time consuming and expensive. The main aim of this study was to evaluate whether optical fibre Brag grating (FBG) sensing system may become a viable tool to study dental material characteristics. Of particular focus was the potential for the system to demonstrate a multi parameter all-in-one feature. A miniature FBG was embedded in six different dental resin composites and employed as a sensor to evaluate linear polymerization shrinkage, thermal expansion and water sorption. This study demonstrates how optical fibre technology can provide simple and reliable methods of measuring the critical physical properties of dental composites. In addition due to the embedding and preservation of the sensor within the samples multiple parameters can be tested for with the same sample.

The significance of etched single-mode polymer optical fibers and their potential for the development of highsensitivity sensors are presented. A polymethyl methacrylatebased single-mode polymer optical fiber is etched to various diameters and it is observed that etching can lead to change in the material properties of the fiber, such as Young's modulus and thermal expansion coefficient. This can play a vital role in improving the intrinsic sensing capabilities of sensors based on etched polymer optical fiber. To demonstrate that the modified material properties of the etched polymer fiber can enhance its intrinsic sensing capabilities, sensing characteristics of etched polymer fiber Bragg gratings for strain, temperature, and pressure are obtained. From the results, it is confirmed that the sensors based on etched polymer fibers exhibit high intrinsic sensitivity compared with un-etched ones. The potential of developing a sensing system for simultaneous measurement of strain and temperature is also demonstrated.