Search

Different optimization strategies to reduce the earth resistance in a high resistivity soil are discussed in this work and illustrated with a practical example. Finite Element simulations reproducing real-world conditions in terms of structure design and soil profiles have been made to evaluate the improvements that should be adopted to minimize earth resistance. We analyze an example of an earthing system of an array of four identical telescopes installed on high resistivity (kΩ· m order) soils with two different behaviors. In the first one, current dissipation occurs in an uniform soil. In the second one, a terrain with four layers of different resistivities is considered. This situation corresponds to a real world case of an observatory constructed in a volcanic terrain. It was found that the best strategy in each case differs: extend horizontal electrodes as far as possible from the foundation in the first case and combine these electrodes with buried vertical electrodes that connect with deep high conductive layers in the second. The results are discussed in terms of the achieved improvements depending on the modifications introduced in the main structure. [ABSTRACT FROM AUTHOR]

Scorpion has long been used in traditional Chinese medicine, because whole scorpion body extract has anti-cancer, analgesic, anti-thrombotic blood anti-coagulation, immune modulating, anti-epileptic, and other functions. The purpose of this study was to find an efficient extraction method and investigate some of physical and chemical parameters, like water solubility, emulsification, foaming properties, and oil-holding capacity of obtained scorpion proteins. Response surface methodology (RSM) was used for the determination of optimal parameters of ultrasonic extraction (UE). Based on single factor experiments, three factors (ultrasonic power (w), liquid/solid (mL/g) ratio, and extraction time (min)) were used for the determination of scorpion proteins (SPs). The order of the effects of the three factors on the protein content and yield were ultrasonic power > extraction time > liquid/solid ratio, and the optimum conditions of extraction proteins were as follows: extraction time = 50.00 min, ultrasonic power = 400.00 w, and liquid/solid ratio = 18.00 mL/g. For the optimal conditions, the protein content of the ultrasonic extraction and yield were 78.94% and 24.80%, respectively. The solubility, emulsification and foaming properties, and water and oil holding capacity of scorpion proteins were investigated. The results of this study suggest that scorpion proteins can be considered as an important ingredient and raw material for the creation of water-soluble supramolecular complexes for drugs. [ABSTRACT FROM AUTHOR]

A fractional factorial design was used to evaluate the effects of temperature, frying time, blanching treatment and the thickness of potato slices on acrylamide content in crisps. The design was used on freshly harvested and four-month stored potatoes. The critical factors found were temperature and frying time, and the interaction between blanching treatment and slice thickness. Once frying conditions were selected, an acrylamide content of 725 and 1030 mg kg−1 was found for non-stored and 4-month stored tubers, with adequate textural parameters in both cases. The difference in concentration is related to storage conditions, which must be controlled in order to control acrylamide levels. Bioaccesibility studies demonstrated that acrylamide concentration remained at 70%, and reductions took place mainly at the intestinal phase, as a result of reaction with nucleophilic compounds. [ABSTRACT FROM AUTHOR]

N-carbamylglutamate (NCG), a synthetic analogue of N-acetylglutamate, is an activator of blood ammonia conversion and endogenous arginine synthesis. Here, we established an accurate quantitative determination of NCG in feeds, animal tissues, and body fluids using the high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS). The sample pretreatment procedures included extraction with 0.5% of formic acid in water/methanol (80/20, v/v), and purification using an anionic solid phase extraction cartridge. Satisfactory separation of NCG was achieved in 20 min with the application of an Atlantis T3 column, and a confirmative detection of NCG was ensured by multiple reaction monitoring of positive ions. NCG spiked in feeds, tissues, and body fluids were evaluated in regard to linearity, sensitivity, recovery, and repeatability. Recoveries for different sample matrices were in the range of 88.12% to 110.21% with relative standard deviations (RSDs) less than 8.8%. Limits of quantification were within the range of 0.012 to 0.073 mg kg−1 and 0.047 to 0.077 μg mL−1 for solid and liquid samples, respectively. This study will provide a solid foundation for the evaluation of availability and metabolic mechanism of NCG in animals. [ABSTRACT FROM AUTHOR]

The Artemisia argyi leaf (AL) has been used as a traditional medicine and food supplement in China and other Asian countries for hundreds of years. Phytochemical studies disclosed that AL contains various bioactive constituents. Among bioactive constituents, phenolic acids have been recognized as the main active compounds in AL. To the best of our knowledge, no research has been focused on extraction method for the bioactive phenolic acids from AL. Nowadays, deep eutectic solvents (DESs) are emerging as a new type of green and sustainable solvent for efficient extraction of bioactive compounds from natural products. In the present study, an environmentally friendly extraction method based on DESs was established to extract bioactive phenolic acids from ALs. Diverse tailor-made solvents, including binary and ternary DESs, were explored for simultaneous extraction of four phenolic acids (3-caffeoylquinic acid, 3,4-di-O-caffeoylquinic acid, 3,5-di-O-caffeoylquinic acid, and 4,5-di-O-caffeoylquinic acid) from AL. The results indicated that the ternary DES composed of a 2:1:2 molar ratio of choline chloride, malic acid, and urea showed enhanced extraction yields for phenolic acids compared with conventional organic solvents and other DESs. Subsequently, the extraction parameters for the four phenolic acids by selected tailor-made DESs, including liquid–solid ratios, water content (%) in the DESs, and extraction time, were optimized using response surface methodology and the optimal extraction conditions were: extraction time, 23.5 min; liquid–solid ratio, 57.5 mL/g (mL of DES/g dry weight of plant material); water content, 54%. The research indicated that DESs were efficient and sustainable green extraction solvents for extraction of bioactive phenolic acids from natural products. Compared to the conventional organic solvents, the DESs have a great potential as possible alternatives to those organic solvents in health-related areas such as food and pharmaceuticals. [ABSTRACT FROM AUTHOR]

Avocado oil has generated growing interest among consumers due to its nutritional and technological characteristics, which is evidenced by an increase in the number of scientific articles that have been published on it. The purpose of the present research was to discuss the extraction methods, chemical composition, and various applications of avocado oil in the food and medicine industries. Our research was carried out through a systematic search in scientific databases. Even though there are no international regulations concerning the quality of avocado oil, some authors refer to the parameters used for olive oil, as stated by the Codex Alimentarius or the International Olive Oil Council. They indicate that the quality of avocado oil will depend on the quality and maturity of the fruit and the extraction technique in relation to temperature, solvents, and conservation. While the avocado fruit has been widely studied, there is a lack of knowledge about avocado oil and the potential health effects of consuming it. On the basis of the available data, avocado oil has established itself as an oil that has a very good nutritional value at low and high temperatures, with multiple technological applications that can be exploited for the benefit of its producers. [ABSTRACT FROM AUTHOR]

This research focused on obtaining eicosapentaenoic acid (EPA, 20:5 n-3) and docosahexaenoic acid (DHA, 22:6 n-3) (EPA+DHA) concentrates from refined commercial salmon oil (RCSO). Independent variables of the complexation process were optimized by means of the application of response surface methodology (RSM) in order to obtain the maximum content of such fatty acids (FAs). As a result of employing the optimized conditions for all the variables (6.0, urea:FA content ratio; −18.0 °C, crystallization temperature; 14.80 h, crystallization time; 500 rpm, stirring speed), high contents of EPA and DHA could be obtained from RCSO, achieving increases of 4.1 and 7.9 times in the concentrate, with values of 31.20 and 49.31 g/100 g total FA, respectively. Furthermore, a 5.8-time increase was observed for the EPA + DHA content, which increased from 13.78 to 80.51 g/100 g total FA. It is concluded that RCSO can be transformed into a profitable source of EPA and DHA (EPA+DHA), thus leading to a product with higher commercial value. [ABSTRACT FROM AUTHOR]

Little information is currently available about the content of different elements in wheat samples from the Republic of Kazakhstan. The concentrations of toxic (As, Cd, Cr, Hg, Pb, and U) and essential (Co, Cu, Fe, Mn, Ni, Se, and Zn) elements in 117 sampled wheat grains from the Republic of Kazakhstan were measured. The results indicated that the mean and maximum concentrations of most investigated elements (As, Cd, Co, Cr, Mn, Se, Pb, and U) were higher in samples collected from southern Kazakhstan. The mean and maximum concentrations of toxic elements such as As, Cd, Hg, and Pb did not exceed levels specified by European, FAO, or Kazakh legislation, although the hazard quotient (HQ) values for Co, Cu, Mn, and Zn were higher than 1 and the hazard index (HI) was higher than 1 for samples collected from all areas of Kazakhstan. This indicates that there should be concern about the potential hazards of the combination of toxic elements in Kazakh wheat.