Search

The prenatal developmental toxicity of bitumen fume was tested by nose-only inhalation in the rat. The fumes for exposure were collected from the headspace of a storage tank filled with a bitumen corresponding in composition to an anticipated worst-case occupational exposure. The composition of these fumes was compared to actual paving site fumes to ensure its representativeness for workplace exposures. In a dose-range-finding study male and female rats were exposed to 0, 103, 480 or 1043 mg/m3 of fume (as total organic mass), for 6 h/day during 20 days post conception (p.c.). Dose-related effects on body weight and lungs were observed in the mid- and high-dose groups. In the main study, dams were exposed to 0, 52, 151 and 482 mg/m3 of fume, for 6 h/day during 19 days p.c. The maternal NOAEL was 52 mg/m³. In the high-dose group treatment-related effects on body weight (gain), food consumption, lung weights, and histopathological changes in lungs and larynx were observed. In the mid-dose group only histopathological changes in the larynx and lungs were found. The NOAEL for prenatal developmental toxicity was 151 mg/m³ based on reduced fetal weight in the high-dose group (482 mg/m³). However, these changes are most likely a consequence of the maternal toxicity, in particular the reduction of maternal body weight gain by 26 % as compared to control. Nose-only exposure to bitumen fumes in concentrations up to 482 mg/m³ from days 1-19 p.c. did not induce any significant fetal anomalies.

In this study we investigated the impact of temperature on emissions as related to various bitumen applications and processes used in commercial products. Bitumen emissions are very complex and can be influenced in quantity and composition by differences in crude source, refining processes, application temperature, and work practices. This study provided a controlled laboratory environment to study five bitumen test materials from three European refineries; three paving grade, one used for primarily roofing and some paving applications, and one oxidized industrial specialty bitumen. Emissions were generated at temperatures between 140°C – 230°C based on typical application temperatures of each product. Emissions were characterized by aerodynamic particle size, total organic matter (TOM), simulated distillation, 40 individual PACs, and fluorescence (FL-PACs) spectroscopy.Results showed that composition of bitumen emissions is influenced by temperature under studied experimental conditions. A distinction between the oxidized bitumen with flux oil (industrial specialty bitumen) and the remaining bitumens was observed. Under typical temperatures used for paving (150°C-170°C), the TOM and PAC concentrations in the emissions were low. However, bitumen with flux oil produced significantly higher emissions at 230°C, laden with high levels of PACs. Flux oil in this bitumen mixture enhanced release of higher boiling-ranged compounds during application conditions.At 200°C and below, concentrations of 4-6 ring PACs were 3 for all test materials, even when flux oil was used. Trends learned about emission temperature-process relationships from this study can be used to guide industry decisions to reduce worker exposure during processing and application of hot bitumen.