Search

RuNi nanoparticles (NP) were prepared by decomposition of [Ru(η4-C8H12)(η6-C8H10)] and [Ni(η4-C8H12)2] by H2 in the presence of polyvinylpyrrolidone (PVP) at 85 °C using several Ru/Ni ratios. The nanoparticles display a segregated structure in which Ni is on the surface, as ascertained by wide angle X-ray scattering (WAXS). The catalytic activity in the selective hydrogenation of furfural of these RuNi NP was correlated with the Ru content. High selectivity towards the partially hydrogenated product 2-(hydroxymethyl)furan (HF) was found when carrying out the reaction in tetrahydrofuran (THF). A different scenario was found when using a protic polar solvent, 1-propanol. Catalysts displaying Ru on the surface were able to hydrogenate the heteroaromatic ring, while those with Ni on the surface were highly selective towards the partially hydrogenated product. In addition, Ru surfaces were prone to catalyse the acetalization reaction in the presence of the alcoholic solvent, while the addition of Ni supressed this reactivity. Density functional theory (DFT) calculations performed on hydrogenated Ru nanoparticles (Ru55H70) show differences in the adsorption energies of several reagents, products, reaction intermediates, and solvents onto the Ru NP surface, which are in line with the experimental catalytic results. [ABSTRACT FROM AUTHOR]

Colloidal Ru nanoparticles (NP) display interesting catalytic properties for the hydrogenation of (hetero)arenes as they proceed efficiently in mild reaction conditions. In this work, a series of Ru based materials was used in order to selectively hydrogenate quinaldine and assess the impact of the stabilizing agent on their catalytic performances. Ru nanoparticles stabilized with polyvinylpyrrolidone (PVP) and 1‐adamantanecarboxylic acid (AdCOOH) allowed to obtain 5,6,7,8‐tetrahydroquinaldine with a remarkable selectivity in mild reaction conditions by choosing the suitable solvent. The presence of a carboxylate ligand on the surface of the Ru NP led to an increase in the activity when compared to Ru/PVP catalyst. The stabilizing agent had also an impact on the selectivity, as carboxylate ligand modified catalysts promoted the selectivity towards 1,2,3,4‐tetrahydroquinaldine, with bulky carboxylate displaying the highest ones. [ABSTRACT FROM AUTHOR]

Cobalt nanoparticles (CoNPs) exhibit quite unique magnetic, catalytic, and optical properties. In this work, imidazolium-based ionic liquids (ILs) are successfully used to elaborate magnetically responsive suspensions of quite monodisperse CoNPs with diameters below 5 nm. The as-synthesized CoNPs adopt the noncompact and metastable structure of ϵ-Co that progressively evolves at room temperature toward the stable hexagonal close-packed allotrope of Co. Accordingly, magnetization curves are consistent with zero-valent Co. As expected in this size range, the CoNPs are superparamagnetic at room temperature. Their blocking temperature is found to depend on the size of the IL cation. The CoNPs produced in an IL with a large cation exhibit a very high anisotropy, attributed to an enhanced dipolar coupling of the NPs, even though a larger interparticle distance is observed in this IL. Finally, the presence of surface hydrides on the CoNPs is assessed and paves the way toward the synthesis for Co-based bimetallic NPs. [ABSTRACT FROM AUTHOR]

A hybrid material made of mononuclear organophosphorus polypyridyl ruthenium complexes covalently bonded to ruthenium nanoparticles has been synthesized via a one-pot organometallic procedure and finely characterized. These results open new avenues to access unique hybrid transition metal nanomaterials. [ABSTRACT FROM AUTHOR]

The choice of suitable organometallic precursors, [Re2(C3H5)4] and [Ru(Me-Allyl)2COD] or [Ru(COD)(COT)], allows us to synthesize polyvinylpyrrolidone (PVP) stabilized bimetallic RuRe nanoparticles of ca. 1.3 nm with narrow size dispersity, displaying the hcp crystal structure and to control their chemical order: an alloy or Re rich surface. The structural features of these NPs were determined using complementary characterization techniques (TEM, HRTEM, STEM-HAADF, EDX, WAXS, FT-IR, MAS-NMR and ICP). In particular, surface state investigation based on CO adsorption and oxidation reactions provided useful information of the chemical order in these nanoparticles. The RuRe NPs were obtained as stable colloidal solutions or powders. Surface reactivity studies demonstrated that the alloy type RuRe/PVP NPs show better resistance to oxidation than the ones displaying a Re enriched surface and are more active towards CO dissociation than monometallic Re/PVP NPs as a result of the synergic effect between Ru and Re. Interestingly, the dissociation of CO was not observed with RuRe/PVP NPs displaying a Re enriched surface. Besides the synthetic aspect, this work highlights the crucial influence of the chemical order resulting from the choice of the metal sources in the control of the reactivity of ultra-small metal nanoparticles. [ABSTRACT FROM AUTHOR]

The C66(COOH)12 hexa-adduct has been successfully used as a building block to construct carboxylate bridged 3D networks with very homogeneous sub-1.8 nm ruthenium nanoparticles. The obtained nanostructures are active in nitrobenzene selective hydrogenation. [ABSTRACT FROM AUTHOR]

Herein, we present a detailed study of the conversion of a nickel(II) diamide precursor to size-tunable, monodisperse nickel nanoparticles (NPs). The thermal decomposition of nickel(II) dioleylamide, synthesized either independently or in situ, resulted in the formation of Ni NPs without the coproduction of water. Mechanistic studies were conducted on the stability and reduction pathway of the NiII precursor, and on the consequent particle formation. Variations in the ratio of trioctylphosine (TOP) to nickel allowed size tunability, which resulted in nanoparticles that ranged in size from 4 to 11 nm in diameter. The DFT calculations support a mechanistic pathway that involves nickel reduction by imine formation. This water-free method was extended to the synthesis of water-sensitive M0 NPs (M=Fe, Co). [ABSTRACT FROM AUTHOR]

Production of hydrogen from a renewable source that is water requires the development of sustainable catalytic processes. This implies, among others, developing efficient catalytic materials from abundant and low-cost resources and investigating their performance, especially in the oxidation of water as this half-reaction is the bottleneck of the water splitting process. For this purpose, NiFe-based nanoparticles with sizes ca. 3–4 nm have been synthesized by an organometallic approach and characterized by complementary techniques (WAXS, TEM, STEM-HAADF, EDX, XPS, and ATR-FTIR). They display a Ni core and a mixed Ni–Fe oxide shell. Once deposited onto FTO electrodes, they have been assessed in the electrocatalytic oxygen evolution reaction under alkaline conditions. Three different Ni/Fe ratios (2/1, 1/1 and 1/9) have been studied in comparison with their monometallic counterparts. The Ni2Fe1 nanocatalyst displayed the lowest overpotential (320 mV at j = 10 mA cm−2) as well as excellent stability over 16 h. [ABSTRACT FROM AUTHOR]

Pure and highly crystalline γ-Fe2O3 nanocrystals (NCs) are obtained when hydrolysis and oxidation of a FeII organometallic precursor are performed in successive steps. Their synthesis in pure alkylamine leads to NCs of about 6 nm. In aqueous solutions of poly(vinyl)pyrrolidone, such pristine NCs form aggregates of about 150 nm that exhibit a high transversal relaxivity (r2=466 mm-1 s-1) about four times higher than that of a commercial Feridex magnetic resonance imaging (MRI) contrast agent. Consequently, they provide a significant decrease in the NMR signal at very short echo time (8 ms), which is of paramount importance in clinical practice because of the reduced duration of MRI measurements. [ABSTRACT FROM AUTHOR]

Ultra-small monodisperse rhenium nanoparticles (Re NPs; ca. 1.0-1.2 nm) were easily prepared by reducing the organometallic complex [Re2(C3H5)4] under a dihydrogen atmosphere under mild reaction conditions (3 bar H2;120 °C). The particles can be stabilized by a ligand, hexadecylamine, or a polymer, polyvinylpyrrolidone and accommodate surface hydrides. [ABSTRACT FROM AUTHOR]

Amorphous calcium orthophosphates (ACP) are bioactive compounds presenting high interest as bone substitute. However, the synthesis of such metastable products requires special attention as they can rapidly evolve into a crystalline phase during the elaboration process. The resulting increased stability generally leads to less bioactive reactive materials. Among the various strategies developed to obtain stable form of ACP, the use of spray drying is an effective and reproducible route. Compared to previous works, this study aims to demonstrate for the first time the feasibility of ACP elaboration by spray drying directly from a single solution of selected precursors. Moreover, structuration of the spray-dried powders was determined at different length scales, demonstrating a hierarchical organization from nanometric clusters to particles aggregates. These complementary analyses highlighted a thorough mechanism of particles formation during processing. The effect of the initial composition of the solution was observed, and it was demonstrated that there is a correlation with the purity of the final product that may be modulated. In addition, ACP powders were found to be highly reactive in aqueous medium and their fast transformation into low crystalline apatite suggests a good suitability for biomedical use. [ABSTRACT FROM AUTHOR]

The bottom‐up covalent assembly of metallic nanoparticles (NP) represents one of the innovative tools in nanotechnology to build functional heterostructures, with the resulting assemblies showing superior collective properties over the individual NP for a broad range of applications. The ability to control the dimensionality of the assembly is one of the major challenges in designing and understanding these advanced materials. Here, two new organic linkers were used as building blocks in order to guide the organization of Ru NP into two‐ or three‐dimensional covalent assemblies. The use of a hexa‐adduct functionalized C60 leads to the formation of 3D networks of 2.2 nm Ru NP presenting an interparticle distance of 3.0 nm, and the use of a planar carboxylic acid triphenylene derivative allows the synthesis of 2D networks of 1.9 nm Ru NP with an interparticle distance of 3.1 nm. The Ru NP networks were found to be active catalysts for the selective hydrogenation of phenylacetylene, reaching good selectivity toward styrene. Overall, we demonstrated that catalyst performances are significantly affected by the dimensionality (2D vs. 3D) of the heterostructures, which can be rationalize based on confinement effects. [ABSTRACT FROM AUTHOR]

The preparation and structural characterization of an original Th peroxo sulfate dihydrate, crystallizing at room temperature in the form of stable 1D polymeric microfibres is described. A combination of laboratory and synchrotron techniques allowed solution of the structure of the Th(O2)(SO4)(H2O)2 compound, which crystallizes in a new structure type in the space group Pna21 of the orthorhombic crystal system. Particularly, the peroxide ligand coordinates to the Th cations in an unusual μ3‐η2:η2:η2 bridging mode, forming an infinite 1D chain decorated with sulfato ligands exhibiting simultaneously monodentate and bidentate coordination modes. [ABSTRACT FROM AUTHOR]

In this work, we describe the synthesis of a new N-heterocyclic carbene (NHC) ligand, derived from a hybrid pyrazole-imidazolium scaffold, namely 1-[2-(3,5-dimethylpyrazol-1-yl)ethyl]-3-((S)-1-phenylethyl)-3H-imidazol-2-ylidene (L). This ligand has been used as a stabilizer for the organometallic synthesis of palladium(0) nanoparticles (Pd NPs). L presents a better stabilizing effect than its pre-carbenic HLCl counterpart, allowing the formation of isolated Pd NPs while HLCl yields aggregated ones. Additionally, molecular Pd(ii) coordination compounds of L and HLCl were synthesized and characterized to better understand the coordination modes of these ligands. Both molecular and colloidal Pd systems have been further tested in catalytic C–C coupling processes. Three different types of reactions have been observed depending on the catalytic system: (i) the Suzuki–Miyaura reaction takes place with Pd molecular complexes; (ii) a secondary reaction, the dehalogenation of the substrate, is always detected and (iii) the C–C homocoupling between two molecules of bromoarenes is observed with colloidal catalysts. [ABSTRACT FROM AUTHOR]

Enhancement of the thermoelectric properties of bismuth due to size reduction has prompted a large body of studies and recent interest in the nanochemistry of this material. The size control at the nanometer scale is complicated because of bismuth's low melting point and little known surface chemistry. We report herein an efficient synthetic method producing bismuth nanoparticles (Bi NPs) of sizes below 10 nm, and of rhombohedral structure based on transmission electron microscopy (TEM) and wide angle X-ray scattering (WAXS) analysis. The nature and dynamics of the ligands at their surface have been investigated by infrared spectroscopy (IR) and nuclear magnetic resonance (NMR) spectroscopy. We demonstrate that alkynyl ligands, seldom used in nanochemistry, efficiently coordinate at the surface and afford stable Bi NPs that can be easily purified, leading to powders with high bismuth payload which can be redispersed into stable colloidal solutions. [ABSTRACT FROM AUTHOR]

Core-shell RuPt (Ru core-Pt shell) and PtRu (Pt core-Ru shell) nanoparticles were prepared by decomposing in a two-step procedure a ruthenium ([Ru(COD)(COT)] (COD = 1,5-cyclooctadiene, COT = 1,3,5-cyclooctatriene)) and a platinum complex ([Pt2(dba)3] (dba = dibenzylideneacetone) or [Pt(CH3)2(COD)]) in the presence of 4-(3-phenylpropyl)pyridine (PPP) as a stabilizer and using different Ru/Pt ratios. The data obtained from a combination of several analyses (TEM, HRTEM, WAXS and IR) indicate that the soobtained nanoparticles present a core-shell structure. The catalytic performances of these bimetallic nanoparticles for the selective hydrogenation of trans-cinnamaldehyde were investigated, which provided interesting results as well as useful information to elucidate their structure and composition. Indeed, the catalytic results evidence that: (1) the combination of both metals led in some cases to a synergistic effect on the selectivity of the reaction, and (2) the structure and the composition affected the selectivity of the reaction. [ABSTRACT FROM AUTHOR]

Ultrasmall FeRu bimetallic nanoparticles were prepared by co-decomposition of two organometallic precursors, {Fe[N(Si(CH3)3)2]2}2 and (η4-1,5-cyclooctadiene)(η6-1,3,5-cyclooctatriene)ruthenium(0) (Ru(COD)(COT)), under dihydrogen at 150 °C in mesitylene. A series of FeRu nanoparticles of sizes of approximately 1.8 nm and incorporating different ratios of iron to ruthenium were synthesized by varying the quantity of the ruthenium complex introduced (Fe/Ru=1:1, 1:0.5, 1:0.2, and 1:0.1). FeRu nanoparticles were characterized by TEM, high-resolution TEM, and wide-angle X-ray scattering analyses. Their surface was studied by hydride titration and IR spectroscopy after CO adsorption and their magnetic properties were analyzed by using a superconducting quantum interference device (SQUID). The FeRu nanoparticles were used as catalysts in the hydrogenation of styrene and 2-butanone. The results indicate that the selectivity of the nanoparticle catalysts can be modulated according to their composition and therefore represent a case study on fine-tuning the reactivity of nanocatalysts and adjusting their selectivity in a given reaction. [ABSTRACT FROM AUTHOR]

Highlights from the article: Peroxide ligands coordinate to Th cations with a rare SB 3 sb - SP 2 sp : SP 2 sp : SP 2 sp bridging mode, forming infinite 1D chains decorated simultaneously with monodentate and bidentate sulfato ligands. Peroxide, spectroscopic techniques, structure elucidation, sulfate, thorium.