Search

The essential oil of the leaves of Tetraclinis articulata Vahl Masters and fractions obtained by fractionation were analyzed by GC and GC/MS. The total essential oil of the leaves was found to contain bornyl acetate (30.6%), camphor (18.6%), α-pinene (16.8%), limonene (5.7%) and borneol (4.7%) as major compounds. The fractionation by flash chromatography of the oil gave four fractions (one hydrocarbon fraction and three oxygenated fractions). The FH fraction consists of monoterpene hydrocarbons, mainly α-pinene (28.2%) and limonene (12.6%). The FO1 fraction mainly includes bornyl acetate (47.2%) and camphor (26.5%), while the fractions FO2 and FO3 particularly concentrate on borneol (37.5; 32.2%) and camphor (20.8; 15.3%), respectively. The antimicrobial activity was tested with the oil of the leaves and chromatographic fractions. The essential oil crude and oxygenate fractions including FO2 and FO3 are the most active. The FO2 fraction in particular would be recommended to optimize the antimicrobial activity of the essential oil Tetraclinis articulata. [ABSTRACT FROM AUTHOR]

The efficient dirubidium cobalt bis(dihydrogendiphosphate) dihydrate compound is successfully synthesized in a solution and used as a reactive sorbent for the CO 2 and CH 4 gases adsorption and storage. A crystal of this Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O compound has been isolated and characterized by single X-ray diffraction analysis and was found to crystallize in the triclinic system ( P 1 ¯ ) with the cell parameters (Å): 6.980(1), 7.370(1), 7.816(1), 81.74(1), 70.35(1), 86.34(1); V = 374.68(9) Å3, Z = 2. The crystal-packing consists of a three-dimensional framework made upon corners and edges sharing of [RbO 7 ], [H 2 P 2 O 7 ] and [CoO 6 ] entities, furthermore linked by a network of H-bonds. The UV-Vis spectroscopy revealed usual transitions between the ground state 4T1g and the upper levels 4T2g, 4A2g and 4T1g (P). Moreover, the CO 2 and CH 4 gases sorption measurements were successfully performed at two different temperatures (25 and 45 °C) and various pressures ranging from vacuum to 50 bar. Our results show that rate of CO 2 and CH 4 capturing was 3.10 mmol/g and 2.35 mmol/g at temperature 25 °C and pressure 50 bar, respectively. This compound showed a clear potential for CO 2 /CH 4 adsorption and storage thereby paving the way towards its exploration and adaptation for capturing and collecting carbon dioxide and greenhouse gases from the air, and their conversion into hydrocarbon fuels using existing mature technologies. We have also conducted density functional theory calculations to study the CO 2 and CH 4 adsorption properties of Rb 2 Co(H 2 P 2 O 7 ) 2 ·2H 2 O. The simulation results show enhanced adsorption of both types of molecules on the surface of the material., (© 2024. The Author(s).)

Microbial infections and nosocomial diseases associated with biomaterial have become a major problem of public health and largely lead to revision surgery, which is painful and quite expensive for patients. These infections are caused by formation of biofilm, which present a difficulty of treatment with conventional antibiotics. The aim of our study is to investigate the theoretical adhesion of Staphylococcus aureus and Pseudomonas aeruginosa on four 3-dimensional printing filament materials used in the manufacture of medical equipment. Thus, the physicochemical properties of these microorganisms and all filament materials were determined using the contact angle measurements. Our results indicated that bacterial surfaces were hydrophilic, strongly electron donating and weakly electron accepting. In contrast, nylon, acrylonitrile butadiene-styrene, polyethylene terephthalate, and polylactic acid surfaces were hydrophobic and more electron-donor than electron-acceptor. In addition, according to the values of total free interaction energy ΔG Total , Staphylococcus aureus was found unable to adhere to the filament materials except polyethylene terephthalate surface. However, Pseudomonas aeruginosa showed adhesion capacity only for acrylonitrile butadiene-styrene and polyethylene terephthalate surfaces. These findings imply that the usage of these 3D printed materials in the medical area necessitates more research into enhancing their resistance to bacterial adherence., (© 2023. Institute of Microbiology, Academy of Sciences of the Czech Republic, v.v.i.)

The primary objective of the present inquiry was to assess the impact of gamma irradiation on the chemical composition and antibacterial potential of the essential oil extracted from the aerial parts of Moroccan Tanacetum annuum L. to this end, two distinct irradiation doses of 5 kGy and 10 kGy were administered to the essential oil, and the resultant effects were evaluated via analysis of the oil's chemical composition and antibacterial activity. The study findings have revealed that irradiation technology possesses the remarkable ability to modulate the concentrations of specific chemical constituents in a manner that effectively amplifies the antibacterial activity of the essential oil. Moreover, the technology has evinced the generation of novel compounds while also demonstrating the eradication of certain pre-existing ones upon the oil's exposure to irradiation. These discoveries have emphasized the potential of irradiation technology for augmenting the chemical profile of essential oils, thereby mitigating the risk of contamination via microbiological, physical, or chemical means, ultimately enhancing the therapeutic efficacy of the plant and its essential oil. Furthermore, the results of this study signify the possibility of harnessing irradiation technology in the production of various natural products and essential oils. The present research has thus broadened the horizons for the application of irradiation technology in advancing the potency and safety of essential oils, paving the way for a diverse range of applications in different fields, such as medicine., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (© 2023 The Authors.)

Recent improvements in 3D printing technology have increased the usage of 3D printed materials in several areas. An exciting and emerging area of applying these next-generation manufacturing strategies is the development of devices for biomedical applications. The main aim of this work was to investigate the effect of tannic acid, gallic acid, and epicatechin gallate on the physicochemical characteristics of acrylonitrile butadiene-styrene (ABS) and Nylon 3D printing materials using the contact angle method. The adhesion of Staphylococcus aureus on untreated and treated materials was evaluated by scanning electron microscopy (SEM) analysis and the images were treated by MATLAB software. The results of the contact angle measurements showed a significant change in the physicochemical properties of both surfaces, indicated an increase in the electron donor character of 3D printing materials following treatment. Thus, the ABS surfaces treated with tannic acid, gallic acid, and epicatechin gallate have become more electron donating. Furthermore, our results proved the ability of S. aureus to adhere on all materials with a percentage of 77.86% for ABS and 91.62% for nylon. The SEM has shown that all actives molecules were sufficient to obtain better inhibition of bacterial adhesion, which tannic acid has shown a total inhibition of S. aureus on ABS. From these results, our treatment presents a high potential for utilization as an active coating to prevent bacterial attachment and the eventual biofilm development in medical field., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In the heritage field, the microbial adhesion on wood, and consequently the formation of biofilm led to inestimable losses of historical and cultural monuments. Thereby, this study aimed to examine the combined effect of Thymus vulgaris, Myrtus communis, and Mentha pulegium essential oils on wood surface physico-chemical properties, and to elaborate the optimal mixture using the mixture design approach coupled to the contact angle method. It was found that both wood hydrophobicity and electron donor character increased significantly after treatment using an optimal mixture containing 57% and 43% of M. pulegium and M. communis essential oils, respectively. The theoretical and experimental fungal adhesion on untreated and treated wood were also investigated. The results showed that the adhesion was favorable on untreated wood and reduced using the optimal mixture. Moreover, the experimental data demonstrated that the same mixture exhibited an antiadhesive efficacy effect with a reduction of 36-75% in adhesion.

Background: Ceratonia siliqua L. (Carob tree) is a Mediterranean evergreen, well known for its medicinal properties. The different parts of Carob were proven to exert antidiabetic, antibacterial, antifungal, and antiproliferative effects. Hence, the present paper aims to validate the positive correlation between the high antioxidant activity of carob seed peels and the improvement of negative symptoms of schizophrenia. Materials & Methods: The antioxidant activity was carried out using the β-carotene test. Methionine and carob seed peels (CSP) extracts (50 and 100 mg/kg) were orally administrated to mice for a week. After administration, behavioral tests were assessed using the Y-maze, elevated plus maze, and forced swimming tests, as well as the novel object recognition task. Furthermore, the oxidative stress status was evaluated by analyzing the levels of the antioxidant enzymes: Superoxide dismutase (SOD), glutathione peroxidase (GPx), and malondialdehyde levels (MDA). Results: Both extracts exhibited remarkable antioxidant activity and showed antibacterial effect against Gram-positive bacteria tested ( Bacillus subtilis and Staphylococcus aureus ) and against Pseudomonas aeruginosa (Gram-negative). Therefore, Escherichia coli was very resistant. The behavioral tests proved the efficacy of CSP in enhancing the cognitive impairment of animal models of schizophrenia. Hence, the stated correlation between oxidative stress and schizophrenia was confirmed by the increased SOD and GPx activities and the decreased MDA level. Conclusions: The present study gave further confirmation of the potential correlation between oxidative stress and the development of psychiatric disorders and highlighted the use of natural antioxidants, especially Ceratonia siliqua L. in the improvement of cognitive impairment in the dementia of schizophrenia.

The Monimiaceae, Siparunaceae, and Atherospermataceae, formerly included in the broad ''old'' Monimiaceae family, have long been known for their uses in traditional medicine and have proven to be rich sources of chemically diverse specialized metabolites with numerous potent biological and therapeutical properties. The progress made recently has expanded their phytochemistry and pharmacology albeit to different extents. This review focuses on the non-volatile constituents isolated from the three plant families during the last two decades and their emerging therapeutic potential. Based on the data collected from multiple databases without statistical analysis, approximately 93 components, of which 35 undescribed compounds including γ-lactones, alkaloids, terpenoids, flavonoids, and homogentisic acid derivatives, have been reported. Moreover, diverse biological activities of pure isolated compounds such as anticancer, antioxidant, antiparasitic, antiviral, and antibacterial activities have been evidenced. Besides offering new important perspectives for different diseases' management, the chemical and biological diversities among the isolated compounds, open promising avenues of research and contribute to renewed interest in these families needing further studies. This review provides an updated overview of their potential as sources of leads for drug discovery, while also highlighting ongoing challenges and future research opportunities., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Despite having been used for ages to preserve wood against several effects (biological attack and moisture effects) that cause its degradation, the effect of vegetable oils on the cedar wood physicochemical properties is poorly known. Thus, in this study, the hydrophobicity, electron-acceptor ( γ + ) properties of cedar wood before and after treatment with vegetable oils have been determined using contact angle measurement. The cedar wood has kept its hydrophobic character after treatment with the different vegetable oils. It has become more hydrophobic quantitatively with values of surface energy ranged from -25.84 to -43.45 mJ/m γ - ) properties of cedar wood before and after treatment with vegetable oils have been determined using contact angle measurement. The cedar wood has kept its hydrophobic character after treatment with the different vegetable oils. It has become more hydrophobic quantitatively with values of surface energy ranged from -25.84 to -43.45 mJ/m 2 and more electron donors compared to the untreated sample. Moreover, the adhesion of four fungal strains ( Penicillium commune (PDLd"), Thielavia hyalocarpa , Penicillium commune (PDLd10), and Aspergillus niger ) on untreated and treated cedar wood was examined theoretically and experimentally. For untreated wood, the experimental adhesion showed a positive relationship with the results obtained by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) approach which found that all fungal strains could adhere strongly to the cedar wood material. In contrast, this relationship was not always positive after treatment. The Environmental Scanning Electron Microscopy (ESEM) has shown that P. commune (PDLd10) and A. niger were found unable to adhere to the wood surface after treatment with sunflower and rapeseed oils. In addition, the results showed that the four fungal strains' adhesion was decreased with olive and linseed oils treatment except that of P. commune (PDLd10) treated with linseed oil., Competing Interests: The authors declare no conflicts of interest regarding the publication of this study., (Copyright © 2022 Fadoua Bennouna et al.)

Carob tree (Ceratonia siliqua L.) is one of the most widespread medicinal plants in the Mediterranean area. Traditionally, it was cultivated for its ethnopharmacological benefits and, more especially, for the seeds, which served as unit of measurement of jewelers "carat." Hence, in the last half-century, numerous studies reported a wide range of phytoconstituents contained in all parts of Ceratonia siliqua such as phenolic compounds, flavonoids, tannins, anthocyanins, alkaloids, glycosides, proteins and minerals. This review article unveils the phytochemical constituents, bioactivity and pharmacological studies of Ceratonia siliqua. Recent studies have shown that the extracts of this plant exhibit an antioxidant, antidiarrheal, antibacterial, antifungal, anti-inflammatory, antidiabetic activities and also hepatoprotective and antiproliferative effects. In this review, we provide a summary of the most interesting data related to bioactivity and therapeutic potential of Ceratonia siliqua in a way to suggest possible future studies that may use Ceratonia siliqua as an undeniable natural alternative for neurodegenerative diseases treatment.

In this work, we characterized by high-performance liquid chromatography, the γ-tocopherol (573.66 μg/g), and by gas chromatography-mass spectrometry, the linoleic acid (62.05%) as major components from Peganum harmala L. seeds oil and evaluated their potential in vivo acute antiinflammatory, analgesic activities, and in vitro antioxidative capacity. The 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging assay showed an important antioxidant activity (62.50% with an IC50 of 4.8 mg/mL). In addition, the antiinflammatory effect of the formulation cream at 20% caused a reduction in inflammation at 5 hours after carrageenan application compared with diclofenac at 1% (60.4%; 45.65%; respectively). A slight potential peripheral analgesia was noted in plantar test in treated rats with cream (20 s). Therefore, our findings demonstrate that formulation cream of P. harmala seeds oil has an interesting antiinflammatory activity with a slight peripheral analgesic effect due mainly to its richness on linoleic acid, γ-tocopherol, and polyphenols and to its important antioxidant capacity.

Background: Uric acid is the end product of purine metabolism in humans and its increased level in serum leads to hyperuricemia. Among the different regulatory factors to control the level of uric acid in humans, xanthine oxidase (XO) is a well-established pharmacological target, as it is directly involved in uric acid production., Methods: The aim of the study was to present a systematic approach to analyze the xanthine oxidase inhibition studies from in vitro leading to in vivo., Results: Initially, dinuclear cyclam complex 1 was evaluated for in-vitro XO inhibitory activity using a spectrophotometric assay. Significant results were obtained in XO inhibition assay (IC50 = 3.70 ± 0.07 μM), in comparison to the standard drug, allopurinol (IC50 = 2.00 ± 0.01 μM). Complex 1 showed a non-competitive type of inhibition in kinetic studies. Complex 1 was also found to be non-cytotoxic in MTT assay, as it did not affect the viability of 3T3-cell line. Based on these results, compound 1 was further evaluated for the in-vivo xanthine oxidase inhibitory activity. An in-vivo model was used to evaluate the XO inhibitory activity in plasma samples of male Wistar rats. Complex 1 showed a significant inhibition of xanthine oxidase activity (50%), in comparison to the standard inhibitor allopurinol (100%). Therefore, non-cytotoxic compound 1 could be considered as an anti-hyperurecemic lead for further studies., Conclusion: Our studies concluded that complex 1 is a non-cytotoxic inhibitor that decreases the activity of XO in a non-competitive manner. It can serve as a potential anti-hyperurecemic lead after further pre-clinical and clinical studies., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.)