Search

The ITER Collective Thomson scattering (CTS) diagnostic will measure the dynamics of fusion-born alpha particles in the burning ITER plasma by scattering a 1 MW 60 GHz gyrotron beam off fast-ion induced fluctuations in the plasma. The diagnostic will have seven measurement volumes across the ITER cross section and will resolve the alpha particle energies in the range from 300 keV to 3.5 MeV; importantly, the CTS diagnostic is the only diagnostic capable of measuring confined alpha particles for energies below ∼1.7 MeV and will also be sensitive to the other fast-ion populations. The temporal resolution is 100 ms, allowing the capture of dynamics on that timescale, and the typical spatial resolution is 10–50 cm. The development and design of the in-vessel and primary parts of the CTS diagnostic has been completed. This marks the beginning of a new phase of preparation to maximize the scientific benefit of the diagnostic, e.g., by investigating the capability to contribute to the determination of the fuel-ion ratio and the bulk ion temperature as well as integrating data analysis with other fast-ion and bulk-ion diagnostics. [ABSTRACT FROM AUTHOR]

We present a novel method for efficient production of prototypes of microwave components by fused depositing modeling, also known as 3D plastic printing, and vapor deposition coating of a 1 μm copper layer. We demonstrate that the properties of the components follow the predicted performance for low power microwave propagation. The production method offers new opportunities for cheap and efficient production of mock-ups and prototypes of advanced-geometry components for tests with low-power microwaves. [ABSTRACT FROM AUTHOR]

Inertial electrostatic confinement offers a relatively simple and cost-effective means of generating fusion plasmas for research and industrial applications. Here, we present the experimental setup and discharge characteristics of the inertial electrostatic confinement device at the Dept. of Physics, Technical Univ. of Denmark. Special features of this setup include a cylindrical anode and the novel use of 3D printed soccerball-like cathode grids of different sizes. Measurements with these grids show 25% higher fusion neutron rates than with manually manufactured grids with larger wire spacings. Additionally, we observe significantly higher neutron rates with smaller grids, with spherical rather than cylindrical cathodes, and when using the vacuum chamber, rather than a second spherical grid, as the anode. Ion–orbit simulations predict a core density in the ion distribution in good agreement with optical measurements, confirming that asymmetries in the cathode grid potential prevent a fully convergent ion flow. The simulations also demonstrate that the asymmetry of the electric field induced by the voltage stalk lowers the characteristic ion recirculation by a factor of four, and we discuss measures to circumvent this. Comparing measurements and simulations conducted with a spherical and cylindrical grid reveals tentative evidence that fusion reactivity is highly core-localized, pointing to ion–neutral fusion as the dominant reaction. We also quantify the thermionic and impact-induced secondary electron emission in the device, showing that only the latter can potentially suppress the ion current during normal operation. [ABSTRACT FROM AUTHOR]

A Collective Thomson Scattering (CTS) diagnostic is installed at Wendelstein 7-X for ion temperature measurements in the plasma core. The diagnostic utilizes 140 GHz gyrotrons usually used for electron cyclotron resonance heating (ECRH) as a source of probing radiation. The CTS diagnostic uses a quasi-optical transmission line covering a distance of over 40 m. The transmission line is shared between the ECRH system and the CTS diagnostic. Here we elaborate on the design, installation, and alignment of the CTS diagnostic and present the first measurements at Wendelstein 7-X. [ABSTRACT FROM AUTHOR]

Collective Thomson scattering (CTS) measurements provide information about the composition and velocity distribution of confined ion populations in fusion plasmas. The bulk ion part of the CTS spectrum is dominated by scattering off fluctuations driven by the motion of thermalized ion populations. It thus contains information about the ion temperature, rotation velocity, and plasma composition. To resolve the bulk ion region and access this information, we installed a fast acquisition system capable of sampling rates up to 12.5 GS/s in the CTS system at ASDEX Upgrade. CTS spectra with frequency resolution in the range of 1 MHz are then obtained through direct digitization and Fourier analysis of the CTS signal. We here describe the design, calibration, and operation of the fast receiver system and give examples of measured bulk ion CTS spectra showing the effects of changing ion temperature, rotation velocity, and plasma composition. [ABSTRACT FROM AUTHOR]

The velocity-space sensitivities of fast-ion diagnostics are often described by so-called weight functions. Recently, we formulated weight functions showing the velocity-space sensitivity of the often dominant beam-target part of neutron energy spectra. These weight functions for neutron emission spectrometry (NES) are independent of the particular NES diagnostic. Here we apply these NES weight functions to the time-of-flight spectrometer TOFOR at JET. By taking the instrumental response function of TOFOR into account, we calculate time-of-flight NES weight functions that enable us to directly determine the velocity-space sensitivity of a given part of a measured time-of-flight spectrum from TOFOR. [ABSTRACT FROM AUTHOR]