Search

We constructed a new type of light-weight, nanocarbon based thin film material having good mechanical properties, thermal stability, and electromagnetic shielding efficiency. Our method, 3D printing combined with hot pressing, is a cheap and industrially upscalable process. First a sandwich structure was created by layer-to-layer deposition of alternating 100 lm thick nanocarbon containing plastic layers and 100 lm thick pristine plastic layers, repeated as building blocks. The 3D printed samples were hot pressed to obtain thin films of 10-30 lm thickness. We used a commercial nanocarbon 3D printing filament (Black Magic). TEM investigations revealed the nanocarbon filler to be a mixture of graphene sheets, short carbon nanotubes, fishbone nanotubes, graphitic nanoparticles, and carbon black. Small-angle X-ray scattering and X-ray diffraction studies showed some amorphization of the nanocarbon filler as a consequence of the hot pressing. The nanoindentation hardness, nanoscratch hardness, and Young's modulus increase gradually by increasing the number of layers in the films, due to an increase of the amount of nanocarbon filler. Microwave absorption also increases continuously with the number of nanocarbon layers, reaching 40% for 3 nanocarbon layers. We demonstrate that unlike most conventional composites loaded with nanocarbons having pronounced dielectric properties, when the real part of permittivity Re(e) is much higher than its imaginary part Im(e) at high frequencies, a combination of 3D printing and hot pressing allows the fabrication of composites with Re e ≈ Im e in a very broad frequency range (0.2-0.6 THz). Our new 3D printed—hot pressed thin films may compete with the CVD graphene sandwiches in electromagnetic shielding applications because of their easier processability and low cost. [ABSTRACT FROM AUTHOR]

A new type of light-weight material produced by 3D printing consisting of nano-carbon doped polymer layer followed by a dielectric polymer layer is proposed. We performed temperature dependent characterization and measured the electromagnetic (EM) response of the samples in the GHz and THz range. The temperature dependent structural characteristics, crystallization, and melting were observed to be strongly affected by the presence and the number of nano-carbon doped layers in the sandwich structure. The electromagnetic measurements show a great potential of such a type of periodic material for electromagnetic compatibility applications in microwave frequency range. Sandwich structures containing only two nano-carbon layers already become not transparent to the microwaves, giving an electromagnetic interference shielding efficiency at the level of 8-15 dB. A sandwich consisting of one nano-carbon doped and one polymer layer is opaque for THz radiation, because of 80% of absorption. These studies serve as a basis for design and realization of specific optimal geometries of meta-surface type with the 3D printing technique, in order to reach a high level of electromagnetic interference shielding performance for real world EM cloaking and EM ecology applications. [ABSTRACT FROM AUTHOR]

The penelfin Penaincisalia alina sp. nov. is described from Department Apurímac, Peru on the basis of wing and genitalia characters. Spectral analysis of structural colours carried out on congeneric species is presented. A hitherto unnamed Penaincisalia species from the vicinity of the type locality is also documented. [ABSTRACT FROM AUTHOR]

Colloidal Cu 2 O nanoparticles can exhibit both photocatalytic activity under visible light illumination and resonant Mie scattering, but, for their practical application, they have to be immobilized on a substrate. Butterfly wings, with complex hierarchical photonic nanoarchitectures, constitute a promising substrate for the immobilization of nanoparticles and for the tuning of their optical properties. The native wax layer covering the wing scales of Polyommatus icarus butterflies was removed by simple ethanol pretreatment prior to the deposition of Cu 2 O nanoparticles, which allowed reproducible deposition on the dorsal blue wing scale nanoarchitectures via drop casting. The samples were investigated by optical and electron microscopy, attenuated total reflectance infrared spectroscopy, UV-visible spectrophotometry, microspectrophotometry, and hyperspectral spectrophotometry. It was found that the Cu 2 O nanoparticles integrated well into the photonic nanoarchitecture of the P. icarus wing scales, they exhibited Mie resonance on the glass slides, and the spectral signature of this resonance was absent on Si(100). A novel bio-nanohybrid photonic nanoarchitecture was produced in which the spectral properties of the butterfly wings were tuned by the Cu 2 O nanoparticles and their backscattering due to the Mie resonance was suppressed despite the low refractive index of the chitinous substrate.

Beside the more than two thousand normal specimens of Polyommatus icarus (Rottemburg, 1775) yielded by rearing experiments, there was one perfectly bilateral dichromatic individual first considered to be gynandrous. On the basis of analysing genitalia traits, wing surface covering scale micromorphology, and the spectral characteristics of the blue colour generated by the cover scales, the gender of the specimen has been identified as female. This exemplar was investigated in comparison with gynandrous specimens from the collections of the Hungarian Natural History Museum exhibiting various degrees of intermixing of blue and brown coloration. Focus stacking microscopy for detailed scale morphology and UV-visible reflectance spectroscopy was used for the characterization of the optical properties. Inspecting literature references and the Lycaenidae collection of the museum, further examples have been found for female bilateral dichromatism in the closely related polyommatine lycaenid species Lysandra bellargus (Rottemburg, 1775) and Lysandra coridon (Poda, 1761) what suggests that polyommatine female dichromaticity may be displayed by the manner of bilaterality and mosaicism, phenomena hitherto solely connected to gynandromorphy., Competing Interests: Declaration of competing interest None., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The colour of the butterfly wing serves as an important sexual and species-specific signal. Some species produce structural colouration by developing wing scales with photonic nanoarchitectures. These nanostructures are highly conservative, allowing only a ±10 nm peak wavelength deviation in the reflectance spectra of the blue structural colour in natural Common Blue ( Polyommatus icarus ) populations. They are promising templates of future artificial photonic materials and can be used in potential applications, too. In this work, we present methodology and infrastructure for breeding laboratory populations of Common Blue as a cost-effective and environmentally friendly source of nanostructures. Our technology enables the production of approximately 7500 wing samples, equivalent to 0.5-1 m 2 of photonic nanoarchitecture surface within a year in a single custom-made insectarium. To ascertain the reliability of this method, we compared reflectance properties between different populations from distant geographic locations. We also provide genetic background of these populations using microsatellite genotyping. The laboratory population showed genetic erosion, but even after four generations of inbreeding, only minimal shifts in the structural colouration were observed, indicating that wild Common Blue populations may be a reliable source of raw material for photonic surfaces.

Photonic nanoarchitectures of butterfly wings can serve as biotemplates to prepare semiconductor thin films of ZnO by atomic layer deposition. The resulting biotemplated ZnO nanoarchitecture preserves the structural and optical properties of the natural system, while it will also have the features of the functional material. The ZnO-coated wings can be used directly in heterogeneous photocatalysis to decompose pollutants dissolved in water upon visible light illumination. We used the photonic nanoarchitectures of different Morpho butterflies with different structural colors as biotemplates and examined the dependence of decomposition rates of methyl orange and rhodamine B dyes on the structural color of the biotemplates and the thickness of the ZnO coating. Using methyl orange, we measured a ten-fold increase in photodegradation rate when the 20 nm ZnO-coated wings were compared to similarly coated glass substrates. Using rhodamine B, a saturating relationship was found between the degradation rate and the thickness of the deposited ZnO on butterfly wings. We concluded that the enhancement of the catalytic efficiency can be attributed to the slow light effect due to a spectral overlap between the ZnO-coated Morpho butterfly wings reflectance with the absorption band of dyes, thus the photocatalytic performance could be changed by the tuning of the structural color of the butterfly biotemplates. The photodegradation mechanism of the dyes was investigated by liquid chromatography-mass spectroscopy.

The iridescent structural colours of butterflies, generated by photonic nanoarchitectures, often function as species-specific sexual signals; therefore, they are reproduced precisely from generation to generation. The wing scales of oakblue hairstreak butterflies (genus Arhopala , Theclinae, Lycaenidae, Lepidoptera) contain multi-layer photonic nanoarchitectures, which can generate a wide range of structural colours, from violet to green. By scanning (SEM) and cross-sectional transmission electron microscopy (TEM) investigation, the colour tuning mechanism of the cover scales was explored. We revealed that the characteristic size change of structural elements in similar photonic nanoarchitectures led to different structural colours that were examined by various reflectance spectrophotometry techniques. The measured structural properties of the naturally tuned photonic nanoarchitectures were used to calculate wing reflectances, which were compared with the measurement results. We found that the simulated structural colours were systematically redshifted by 95-126 nm as compared with the measured normal-incidence reflectance results. This is attributed to the swelling of the chitinous multi-layer structures during the standard TEM sample preparation and the tilt of the cover scales, which both affect the apparent layer thicknesses in the TEM cross-sections. We proposed a simulation correction and compared the results with the layer thicknesses measured on cryogenically prepared non-embedded SEM cross-sections., Competing Interests: We declare we have no competing interests., (© 2023 The Authors.)

The nymphalid butterfly Euphaedra neophron (Hopffer, 1855) is the only structurally coloured species representing the genus along the Indian Ocean coast in East Africa and Southern Africa, with a distribution from southern Somalia to the Kwa-Zulu-Natal region of South Africa. The range of E. neophron is subdivided to several, geographically distinct populations, currently recognised as subspecies by taxonomists on the basis of violet, blue, and green-coloured morphs. We investigated the optical mechanism of all these morphs by various materials science techniques. We found that the structural colour is generated by the lower lamina of the cover scales and the different colours are tuned according to their thickness, which was also proved by modelling. The colour tuning of the different subspecies does not reflect any clinal pattern, be it geographical or altitudinal.

Solar radiation is a cheap and abundant energy for water remediation, hydrogen generation by water splitting, and CO 2 reduction. Supported photocatalysts have to be tuned to the pollutants to be eliminated. Spectral engineering may be a handy tool to increase the efficiency or the selectivity of these. Photonic nanoarchitectures of biological origin with hierarchical organization from nanometers to centimeters are candidates for such applications. We used the blue wing surface of laboratory-reared male Polyommatus icarus butterflies in combination with atomic layer deposition (ALD) of conformal ZnO coating and octahedral Cu 2 O nanoparticles (NP) to explore the possibilities of engineering the optical and catalytic properties of hybrid photonic nanoarchitectures. The samples were characterized by UV-Vis spectroscopy and optical and scanning electron microscopy. Their photocatalytic performance was benchmarked by comparing the initial decomposition rates of rhodamine B. Cu 2 O NPs alone or on the butterfly wings, covered by a 5 nm thick layer of ZnO, showed poor performance. Butterfly wings, or ZnO coated butterfly wings with 15 nm ALD layer showed a 3 to 3.5 times enhancement as compared to bare glass. The best performance of almost 4.3 times increase was obtained for the wings conformally coated with 15 nm ZnO, deposited with Cu 2 O NPs, followed by conformal coating with an additional 5 nm of ZnO by ALD. This enhanced efficiency is associated with slow light effects on the red edge of the reflectance maximum of the photonic nanoarchitectures and with enhanced carrier separation through the n-type ZnO and the p-type Cu 2 O heterojunction. Properly chosen biologic photonic nanoarchitectures in combination with carefully selected photocatalyst(s) can significantly increase the photodegradation of pollutants in water under visible light illumination.

The photocatalytic activity of a flat surface can be increased by micro- and nanostructuring the interface to increase the area of the contact surface between the photocatalyst and the solute, and moreover, to optimize charge carrier transfer. Further enhancement can be achieved by using photonic nanostructures, which exhibit photonic band gap (PBG). Structurally coloured butterfly wings offer a rich 'library' of PBGs in the visible spectral range which can be used as naturally tuned sample sets for biotemplating. We used conformal atomic layer deposition of ZnO on the wings of various butterfly species ( Arhopala asopia , Hypochrysops polycletus , Morpho sulkowskyi , Polyommatus icarus ) possessing structural colour extending from the near UV to the blue wavelength range, to test the effects arising from the nanostructured surfaces and from the presence of different types of PBGs. Aqueous solutions of rhodamine B were used to test the enhancement of photocatalytic activity that was found for all ZnO-coated butterfly wings. The best reaction rate of decomposing rhodamine B when illuminated with visible light was found in 15 nm ZnO coated M. sulkowskyi wing, the reflectance of which had the highest overlap with the absorption band of the dye and had the highest reflectance intensity., (© 2022 The Authors.)

A large fraction of dorsal wing surface ground scales show an unusual granulated nature, composed of material apparently extruded from the scale lumen in male individuals of both Trichonis Hewitson, 1865 species in the tribe Eumaeini, a rare Guyanian-Amazonian genus. Only a few not-granulated male specimens are known, females are not granulated. The granulated scales are investigated by various microscopic (optical, scanning and transmission electron microscopy, focused ion beam lamella cutting) and spectroscopic (optical reflectance, energy-dispersive X-ray (EDS), Raman) techniques. The characteristic blue colour unique in the South American representatives of the tribe is documented and analysed. EDS spectra show that the granules contain additional calcium and oxygen as compared with the un-granulated regions of the same scale. Electron diffraction (inside the TEM) did not reveal any crystalline component in the granules. The granulated wing surfaces of the males exhibit a UV absorption band at 280 nm, characteristic for biogenic CaCO 3 ; therefore, the material of the granules is tentatively identified as CaCO 3 . It is shown that the granules influence the optical properties of the dorsal wing surface resulting in a characteristic spectrum., (Copyright © 2021 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The males of more than 80% of the Lycaenidae species belonging to the tribe Polyommatini exhibit structural coloration on their dorsal wing surfaces. These colors have a role in reinforcement in prezygotic reproductive isolation. The species-specific colors are produced by the cellular self-assembly of chitin/air nanocomposites. The spectral position of the reflectance maximum of such photonic nanoarchitectures depends on the nanoscale geometric dimensions of the elements building up the nanostructure. Previous work showed that the coloration of male Polyommatus icarus butterflies in the Western and Eastern Palearctic exhibits a characteristic spectral difference (20 nm). We investigated the coloration and the de novo developed DNA microsatellites of 80 P. icarus specimens from Europe from four sampling locations, spanning a distance of 1621 km. Remarkably good concordance was found between the spectral properties of the blue sexual signaling color (coincident within 5 nm) and the population genetic structure as revealed by 10 microsatellites for the P. icarus species., (© 2021. The Author(s).)

Color is an important communication channel for day-flying butterflies. Chemical (pigmentary) coloration is often supplemented by physical color generated by photonic nanostructures. These nanoarchitectures - which are characteristic for a given species - exhibit wavelength ranges in which light propagation is forbidden. The photonic nanoarchitectures are located in the lumen of the wing scales and are developed individually by each scale during metamorphosis. This self-assembly process is governed by the genes in the nucleus of the scale producing cell. It is crucial to establish well-defined measurement methods for the unambiguous characterization and comparison of colors generated in such a complex manner. Owing to the intricate architecture ordered at multiple levels (from centimeters to tens of nanometers), the precise quantitative determination of butterfly wing coloration is not trivial. In this paper, we present an overview of several optical spectroscopy measurement methods and illustrate techniques for processing the obtained data, using the species Polyommatus bellargus as a test case, the males of which exhibit a variation in their blue structural color that is easily recognizable to the naked eye. The benefits and drawbacks of these optical methods are discussed and compared. Furthermore, the origin of the color differences is explained in relation to differences in the wing scale nanomorphology revealed by electron microscopy. This in turn is tentatively associated with the unusually large genetic drift reported for this species in the literature., (Copyright © 2020 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The phenotypic changes induced by prolonged cooling (2-12 weeks at 5 °C in the dark) of freshly formed Polyommatus icarus pupae were investigated. Cooling halted the imaginal development of pupae collected shortly after transformation from the larval stage. After cooling, the pupae were allowed to continue their developmental cycle. The wings of the eclosed specimens were investigated by optical microscopy, scanning and cross-sectional transmission electron microscopy, UV-VIS spectroscopy and microspectroscopy. The eclosed adults presented phenotypic alterations that reproduced results that we published previously for smaller groups of individuals remarkably well; these changes included i) a linear increase in the magnitude of quantified deviation from normal ventral wing patterns with increasing cooling time; ii) slight alteration of the blue coloration of males; and iii) an increasing number of blue scales on the dorsal wing surface of females with increasing cooling time. Several independent factors, including disordering of regular scale rows in males, the number of blue scales in females, eclosion probability and the probability of defect-free eclosion, showed that the cooling time can be divided into three periods: 0-4 weeks, 4-8 weeks, and 8-12 weeks, each of which is characterized by specific changes. The shift from brown female scales to first blue scales with a female-specific shape and then to blue scales with a male-specific shape with longer cooling times suggests slow decomposition of a substance governing scale formation., Competing Interests: The authors have declared that no competing interests exist.

It is known that the size of the scales covering the surface of the Lepidoptera wings is in correlation with body size: larger species possess larger scales. However, butterfly individuals representing the various generations of the same species but differing in body size were not investigated in this respect. Similarly, the question whether different scale size may influence structural color generation based on nanoarchitectures in the scale lumen was never addressed. Populations of lowland (environment of Budapest, Hungary) and upland (Carpathian Mountains, Romania) Polyommatus dorylas were compared in terms of voltinism, wing and scale size, and the structural origin of blue coloration. Data analysis showed that the univoltine upland population exhibits a larger wing and scale size. On the other hand, the nanomorphology of the blue color-generating scales was identical when compared between univoltine and bivoltine populations. Coloration was also identical when measured with a spectrophotometer under ultraviolet and visible light. This high accuracy present in the male structural coloration suggests that it is controlled genetically. Body size alteration for enhanced thermal fitness has no influence on the fine structure of the nanoarchitecture present in the scale lumen., (Copyright © 2019 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Photonic nanoarchitectures in the wing scales of butterflies and moths are capable of fast and chemically selective vapor sensing due to changing color when volatile vapors are introduced to the surrounding atmosphere. This process is based on the capillary condensation of the vapors, which results in the conformal change of the chitin-air nanoarchitectures and leads to a vapor-specific optical response. Here, we investigated the optical responses of the wing scales of several butterfly and moth species when mixtures of different volatile vapors were applied to the surrounding atmosphere. We found that the optical responses for the different vapor mixtures fell between the optical responses of the two pure solvents in all the investigated specimens. The detailed evaluation, using principal component analysis, showed that the butterfly-wing-based sensor material is capable of differentiating between vapor mixtures as the structural color response was found to be characteristic for each of them.

Gas/vapor sensors based on photonic band gap-type materials are attractive as they allow a quick optical readout. The photonic nanoarchitectures responsible for the coloration of the wing scales of many butterfly species possessing structural color exhibit chemical selectivity, i.e., give vapor-specific optical response signals. Modeling this complex physical-chemical process is very important to be able to exploit the possibilities of these photonic nanoarchitectures. We performed measurements of the ethanol vapor concentration-dependent reflectance spectra of the Albulina metallica butterfly, which exhibits structural color on both the dorsal (blue) and ventral (gold-green) wing sides. Using a numerical analysis of transmission electron microscopy (TEM) images, we revealed the details of the photonic nanoarchitecture inside the wing scales. On both sides, it is a 1D + 2D structure, a stack of layers, where the layers contain a quasi-ordered arrangement of air voids embedded in chitin. Next, we built a parametric simulation model that matched the measured spectra. The reflectance spectra were calculated by ab-initio methods by assuming variable amounts of vapor condensed to liquid in the air voids, as well as vapor concentration-dependent swelling of the chitin. From fitting the simulated results to the measured spectra, we found a similar swelling on both wing surfaces, but more liquid was found to concentrate in the smaller air voids for each vapor concentration value measured.

We investigated the vapour sensing properties of different graphene-gold hybrid nanostructures. We observed the shifts in the optical spectra near the local surface plasmon resonance of the gold nanoparticles by changing the concentration and nature of the analytes (ethanol, 2-propanol, and toluene). The smaller, dome-like gold nanoparticles proved to be more sensitive to these vapours compared to slightly larger, flat nanoparticles. We investigated how the optical response of the gold nanoparticles can be tuned with a corrugated graphene overlayer. We showed that the presence of graphene increased the sensitivity to ethanol and 2-propanol, while it decreased it towards toluene exposure (at concentrations ≥ 30%). The slope changes observed on the optical response curves were discussed in the framework of capillary condensation. These results can have potential impact on the development of new sensors based on graphene-gold hybrids., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

Color is a widely used communication channel in the living world for a variety of functions ranging from sexual communication to warning colors. A particularly rich spectrum of colors appears on the wings of many butterflies. The males of lycaenid butterflies often exhibit a conspicuous blue coloration generated by photonic nanoarchitectures on their dorsal wing surfaces. Using UV-VIS spectroscopy, we investigated the spatio-temporal variations of this coloration for Polyommatus icarus butterflies, considering an interval of more than 100 years and a geographical range spanning Europe (west) and Asia (east). The blue coloration in Hungary is very stable both within a year (three broods typical in Hungary) and within the period of 100 years (more than 300 generations). East-west geographic variation was investigated among 314 male P. icarus butterflies. In agreement with earlier genetic and morphometric studies, it was found that the western males are not divided in distinct lineages. Clear differences in coloration were found between the eastern and western groups, with a transition in the region of Turkey. These differences are tentatively attributed to bottleneck effects during past glaciations.

Fast, chemically-selective sensing of vapors using an optical readout can be achieved with the photonic nanoarchitectures occurring in the wing scales of butterflies possessing structural color. These nanoarchitectures are built of chitin and air. The Albulina metallica butterfly is remarkable as both the dorsal (blue) and ventral (gold-green) cover scales are colored by the same type (pepper-pot) of photonic nanoarchitecture, exhibiting only a short-range order. The vapors of ten different volatiles were tested for sensing on whole wing pieces and some of the volatiles were tested on single scales as well, both in reflected and transmitted light. Chemically-selective responses were obtained showing that selectivity can be increased by using arrays of sensors. The sensing behavior is similar in single scales and on whole wing pieces, and is similar in reflected and transmitted light. By immersing single scales in an index-matching fluid for chitin, both the light scattering and the photonic nanoarchitecture were switched off, and the differences in pigment content were revealed. By artificially stacking several layers of blue scales on top of each other, both the intensity of the characteristic photonic signal in air and the magnitude of the vapor sensing response for 50% ethanol vapor in artificial air were increased.

Outbreaks caused by the highly pathogenic avian influenza virus (HPAIV) H5N8 subtype clade 2.3.4.4 were first reported in 2014 in South Korea then spread very rapidly in Asia, to Europe, and for the first time, to North America. Efficacy of a recombinant HVT-AI (H5) vaccine (rHVT-H5) to provide clinical protection as well as to significantly reduce the shedding of an H5N8 challenge virus has already been demonstrated in SPF chickens. The aim of our studies was to test the efficacy of the same rHVT-H5 vaccine in controlling the transmission of a recent Hungarian HPAIV H5N8 challenge virus in commercial chickens. Broilers and layers were vaccinated at day old according to the manufacturer's recommendation and then challenged with a 2017 Hungarian HPAIV H5N8 (2.3.4.4b) isolate at 5 or 7 weeks of age, respectively. Evaluation of clinical protection, reduction of challenge virus shedding, and transmission to vaccinated contact birds was done on the basis of clinical signs/mortality, detection, and quantitation of challenge virus in oronasal and cloacal swabs (regularly between 1 and 14 days postchallenge). Measurement of seroconversion to AIV nucleoprotein was used as an indicator of infection and replication of challenge virus. Our results demonstrated that rHVT-H5 vaccination could prevent the development of clinical disease and suppress shedding very efficiently, resulting in the lack of challenge virus transmission to vaccinated contact chickens, regardless the type of birds. Single immunization with the tested rHVT-H5 vaccine proved to be effective to stop HPAIV H5N8 (2.3.4.4b) transmission within vaccinated poultry population under experimental conditions.

The butterfly Mimeresia neavei (Joicey & Talbot, 1921) is the only species in the exclusively African subtribal clade Mimacraeina (Lipteninae: Lycaenidae: Lepidoptera) having sexual dimorphism expressed by structurally blue-colored male and pigmentary colored orange-red female phenotypes. We investigated the optical mechanism generating the male blue color by various microscopic and experimental methods. It was found that the blue color is produced by the lower lamina of the scale acting as a thin film. This kind of color production is not rare in day-flying Lepidoptera, or in other insect orders. The biological role of the blue color of M. neavei is not yet well understood, as all the other species in the clade lack structural coloration, and have less pronounced sexual dimorphism, and are involved in mimicry-rings.

With an overarching goal of addressing global and regional sustainability challenges, Long Term Socio-Ecological Research Platforms (LTSER) aim to conduct place-based research, to collect and synthesize both environmental and socio-economic data, and to involve a broader stakeholder pool to set the research agenda. To date there have been few studies examining the output from LTSER platforms. In this study we enquire if the socio-ecological research from 25 self-selected LTSER platforms of the International Long-Term Ecological Research (ILTER) network has produced research products which fulfil the aims and ambitions of the paradigm shift from ecological to socio-ecological research envisaged at the turn of the century. In total we assessed 4983 publically available publications, of which 1112 were deemed relevant to the socio-ecological objectives of the platform. A series of 22 questions were scored for each publication, assessing relevance of responses in terms of the disciplinary focus of research, consideration of human health and well-being, degree of stakeholder engagement, and other relevant variables. The results reflected the diverse origins of the individual platforms and revealed a wide range in foci, temporal periods and quantity of output from participating platforms, supporting the premise that there is a growing trend in socio-ecological research at long-term monitoring platforms. Our review highlights the challenges of realizing the top-down goal to harmonize international network activities and objectives and the need for bottom-up, self-definition for research platforms. This provides support for increasing the consistency of LTSER research while preserving the diversity of regional experiences., (Copyright © 2017. Published by Elsevier B.V.)

While numerous papers have investigated the effects of thermal stress on the pigmentary colours of butterfly wings, such studies regarding structural colours are mostly lacking, despite the important role they play in sexual communication. To gain insight into the possible differences between the responses of the two kinds of colouration, we investigated the effects of prolonged cold stress (cooling at 5 °C for up to 62 days) on the pupae of Polyommatus icarus butterflies. The wing surfaces coloured by photonic crystal-type nanoarchitectures (dorsal) and by pigments (ventral) showed markedly different behaviours. The ventral wing surfaces exhibited stress responses proportional in magnitude to the duration of cooling and showed the same trend for all individuals, irrespective of their sex. On the dorsal wing surface of the males, with blue structural colouration, a smaller magnitude response was found with much more pronounced individual variations, possibly revealing hidden genetic variations. Despite the typical, pigmented brown colour of the dorsal wing surface of the females, all cooled females exhibited a certain degree of blue colouration. UV-VIS spectroscopy, optical microscopy, and scanning and transmission electron microscopy were used to evaluate the magnitude and character of the changes induced by the prolonged cold stress.

Structural coloration variability was investigated in two Blue butterfly species that are common in Hungary. The males of Polyommatus icarus (Common Blue) and Plebejus argus (Silver-studded Blue) use their blue wing coloration for conspecific recognition. Despite living in the same type of habitat, these two species display differences in prezygotic mating strategy: the males of P. icarus are patrolling, while P. argus males have sedentary behavior. Therefore, the species-specific photonic nanoarchitecture, which is the source of the structural coloration, may have been subjected to different evolutionary effects. Despite the increasing interest in photonic nanoarchitectures of biological origin, there is a lack of studies focused on the biological variability of structural coloration that examine a statistically relevant number of individuals from the same species. To investigate possible structural color variation within the same species in populations separated by large geographical distances, climatic differences, or applied experimental conditions, one has to be able to compare these variations to the normal biological variability within a single population. The structural coloration of the four wings of 25 male individuals (100 samples for each species) was measured and compared using different light-collecting setups: perpendicular and with an integrating sphere. Significant differences were found in the near UV wavelength region that are perceptible by these polyommatine butterflies but are invisible to human observers. The differences are attributed to the differences in the photonic nanoarchitecture in the scales of these butterflies. Differences in the intensity of structural coloration were also observed and were tentatively attributed to the different prezygotic mating strategies of these insects. Despite the optical complexity of the scale covered butterfly wings, for sufficiently large sample batches, the averaged normal incidence measurements and the averaged measurements using an integrating sphere are in agreement., Competing Interests: The authors have declared that no competing interests exist.

Photonic nanoarchitectures occurring in the scales of Blue butterflies are responsible for their vivid blue wing coloration. These nanoarchitectures are quasi-ordered nanocomposites which are constituted from a chitin matrix with embedded air holes. Therefore, they can act as chemically selective sensors due to their color changes when mixing volatile vapors in the surrounding atmosphere which condensate into the nanoarchitecture through capillary condensation. Using a home-built vapor-mixing setup, the spectral changes caused by the different air + vapor mixtures were efficiently characterized. It was found that the spectral shift is vapor-specific and proportional with the vapor concentration. We showed that the conformal modification of the scale surface by atomic layer deposition and by ethanol pretreatment can significantly alter the optical response and chemical selectivity, which points the way to the efficient production of sensor arrays based on the knowledge obtained through the investigation of modified butterfly wings., Competing Interests: The authors declare no conflict of interest.

The role of dreaming in childhood and in adulthood are still equally enigmatic fields yet to be fully explored. However, while there is a consensus at least about the typical content and formal characteristics of adult dream reports, these features are still a matter of debate in the case of young children. Longitudinal developmental laboratory studies concluded that preschoolers' dreams usually depict static images about mostly animals and body states of the dreamer but they basically lack the active representation of the self, human characters, social interactions, dream emotions and motion imagery. Due to methodological arguments these results became the reference points in the literature of developmental dream research, in spite of the significantly different results of numerous recent and relevant studies using extra-laboratory settings. This study aims to establish a methodologically well-controlled and valid way to collect children's dreams for a representative period of time in a familiar home setting to serve as a comparison to the laboratory method. Pre trained parents acted as interviewers in the course of a 6 week-period of dream collection upon morning awakenings. Our results suggest that even preschoolers are likely to represent their own self in an active role (70%) in their mostly kinematic (82%) dream narratives. Their dream reports contain more human, than animal characters (70 and 7% of all dream characters respectively), and social interactions, self-initiated actions, and emotions are usual part of these dreams. These results are rather similar to those of recent extra-laboratory studies, suggesting that methodological issues may strongly interfere with research outcomes especially in the case of preschoolers' dream narratives. We suggest that nighttime awakenings in the laboratory setting could be crucial in understanding the contradictory results of dream studies in case of young children.