Search

Knowledge of the number of people present in a catchment is fundamental for the assessment of spatio-temporal trends in wastewater-based epidemiology (WBE). Accurately estimating the number of people connected to wastewater catchments is challenging however, because populations are dynamic. Methods used to estimate population size can significantly influence the calculation and interpretation of population-normalised wastewater data (PNWD). This paper systematically reviews the reporting of population data in 339 WBE studies. Studies were evaluated based on their reporting of population size, the source of population data, the population calculation methods, and the uncertainties in population estimates. Most papers reported population size (96 %) and the source of population data (60 %). Fewer studies reported the uncertainties in their population data (50 %) and the methods used to calculate these estimates (28 %). This is relevant because different methods have unique strengths and limitations which can affect the accuracy of PNWD. Only 64 studies (19 %) reported all four components of population data. The reporting of population data has remained consistent in the past decade. Based on the findings, we recommend generalised reporting criteria for population data in WBE. As WBE is further mainstreamed and applied, the clear and comprehensive reporting of population data will only become increasingly important., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

The life history of a parasite describes its partitioning of assimilated resources into growth, reproduction, and transmission effort, and its precise timing of developmental events. The life cycle, in contrast, charts the sequence of morphological stages from feeding to the transmission forms. Phenotypic plasticity in life history traits can reveal how parasites confront variable environments within hosts. Within the protist phylum Apicomplexa major clades include the malaria parasites, coccidians, and most diverse, the gregarines (with likely millions of species). Studies on life history variation of gregarines are rare. Therefore, life history traits were examined for the gregarine Monocystis perplexa in its host, the invasive earthworm Amynthas agrestis at three sites in northern Vermont, United States of America. An important value of this system is the short life-span of the hosts, with only seven months from hatching to mass mortality; we were thus able to examine life history variation during the entire life cycle of both host and parasite. Earthworms were collected ( N  = 968 over 33 sample periods during one host season), then parasites of all life stages were counted, and sexual and transmission stages measured, for each earthworm. All traits varied substantially among individual earthworm hosts and across the sites. Across sites, timing of first appearance of infected earthworms, date when transmission stage (oocysts packed within gametocysts) appeared, date when number of both feeding (trophic) cells and gametocysts were at maximum, and date when 100% of earthworms were infected differed from 2-8 weeks, surprising variation for a short season available for parasite development. The maximal size of mating cells varied among hosts and across sites and this is reflected in the number of oocysts produced by the gametocyst. A negative trade-off was observed for the number of oocysts and their size. Several patterns were striking: (1) Prevalence reached 100% at all sites by mid season, only one to three weeks after parasites first appeared in the earthworms. (2) The number of parasites per host was large, reaching 300 × 10 3 cells in some hosts, and such high numbers were present even when parasites first appeared in the host. (3) At one site, few infected earthworms produced any oocysts. (4) The transmission rate to reach such high density of parasites in hosts needed to be very high for a microbe, from >0.33% to >34.3% across the three sites. Monocystis was one of the first protist parasites to have its life cycle described (early 19 th century), but these results suggest the long-accepted life cycle of Monocystis could be incomplete, such that the parasites may be transmitted vertically (within the earthworm's eggs) as well as horizontally (leading to 100% prevalence) and merogony (asexual replication) could be present, not recognized for Monocystis , leading to high parasitemia even very early in the host's season., Competing Interests: The authors declare there are no competing interests., (©2024 Keller and Schall.)

Monocystis perplexa n. sp., a parasite of an important invasive Japanese earthworm in North America, Amynthas agrestis, is described from a site in Vermont. An improved standard for Monocystis species descriptions is proposed including a standard nomenclature to reduce synonymies, a standard set of biometrics and shape descriptions for living cells, and a DNA genomic sequence for the 18S rRNA (∼1,700 base pairs). Comparing morphologies of Monocystis parasites in sympatric earthworm species indicates that M. perplexa is specific to A. agrestis in the study region. Also, polymerase chain reaction primers specific to M. perplexa amplified samples of A. agrestis earthworms taken from several sites in Japan. This suggests the parasite entered North America from Japan, the origin of the invasive Amynthas earthworm, and thus M. perplexa would be the first Monocystis described from the diverse Japanese Amynthas earthworms and the first from East Asia. Monocystis perplexa was found in every population of A. agrestis surveyed in Vermont, always reaching 100% prevalence by late summer (the host has an annual life cycle in Vermont). The 18S gene sequence differed from that of Monocystis agilis from the sympatric earthworm Lumbricus terrestris (the only other sequence available for Monocystis), and a genetic similarity tree places them closest among other gregarines. Many of the 95 described species of Monocystis are very similar in morphology (based on species descriptions), so the 18S gene can act as a barcode for Monocystis species and thus will help to eliminate both synonymies and reveal cryptic species., (© American Society of Parasitologists 2020.)

Ecosystem responses to invasion are strongly influenced by interactions between invaders and native species. If native species provide biotic resistance by consuming or competing with an invader, the invasion may be slowed, and/or invasive populations may be limited. If local herbivores recognize an invasive plant as being similar to native species, they may graze it more readily. Biotic resistance is thus generally predicted to increase if the invader is phylogenetically related to natives. However, if the native species were unpalatable, then grazers may be predisposed to avoid the invader, thus reducing biotic resistance from consumption. In the marine realm, invertebrate grazers often avoid feeding on invasive algae. However, tests comparing macroalgal invaders to phylogenetically related natives have been rare. Here we present data for invertebrate grazing and habitat use of (i) invasive Agarophyton vermiculophyllum (Rhodophyta: Gracilariales: Gracilarieae), (ii) the native contribal species Gracilaria tikvahiae , and (iii) an unrelated native, Ulva sp., the most common native alga in the system. We find that grazers prefer Ulva over both Gracilarieae, both for feeding and for habitat use. These data suggest that biotic resistance from consumption is low and not enhanced by the presence of a closely related native alga.

The syntheses, properties, and broad utility of noble metal plasmonic nanomaterials are now well-established. To capitalize on this exceptional utility, mitigate its cost, and potentially expand it, non-noble metal plasmonic materials have become a topic of widespread interest. As new plasmonic materials come online, it is important to understand and assess their ability to generate comparable or complementary plasmonic properties to their noble metal counterparts, including as both sensing and photoredox materials. Here, we study plasmon-driven chemistry on degenerately doped copper selenide (Cu 2- x Se) nanoparticles. In particular, we observe plasmon-driven dimerization of 4-nitrobenzenethiol to 4,4'-dimercaptoazobenzene on Cu 2- x Se surfaces with yields comparable to those observed from noble metal nanoparticles. Overall, our results indicate that doped semiconductor nanoparticles are promising for light-driven chemistry technologies.

Plasmonic materials show great potential for selective photocatalysis under relatively mild reaction conditions. However, the catalytic activity of these plasmonic catalysts can also depend upon the support material that stabilizes the catalysts, where the composition of the catalytic support may change the overall photocatalytic efficiency and yield. It is unknown how changes in the support material may change the plasmon-driven photocatalysis, which may be initiated by plasmon-derived hot carriers, localized heating, or enhanced electromagnetic fields. Herein, we probe the effects of catalytic supports on heating in plasmon-driven catalysis by examining various gold nanoparticle oxide systems. We use ultrafast surface-enhanced Raman thermometry to measure the effective temperature, equivalent to the vibrational kinetic energy, of reporter molecules located between plasmonic gold nanostructures and local environments ranging from ligands to mesoporous silica shells to silica shells. Upon photoexcitation, the transient effective temperature, equivalent to the energy deposited into a vibrational mode, of adsorbed molecules on the silica-coated samples increases, and the energy quickly dissipates within 3 ps. However, the baseline effective temperature that arises from the surface-enhanced Raman spectroscopy probing process depends upon the encapsulant, where the energy deposition differs by 200-300 K between the ligand-coated (citrate or CTAB) and the silica-coated samples. Adsorbates surrounded by a silica shell experience significantly higher effective temperatures than the adsorbates surrounded by ligands or solvent, likely because of the differing effective heat capacities of these media. Taken together, this work shows that a silica support impacts the localized heating of molecular adsorbates on the gold surface and may play a role in enhanced plasmonic photocatalysis because of increased thermal contributions.

Plasmonic materials efficiently convert light to various forms of energies for many applications, including photocatalysis, photovoltaics, and photothermal therapies. In particular, plasmonic photocatalysts hold incredible promise for highly selective sunlight-driven catalysis through the generation of highly energetic holes and electrons used to drive chemical reactions. However, plasmons are also known to generate heat, and the partitioning of photoexcitation energy into hot carriers and heat on molecularly relevant time scales is not well understood, yet plays a crucial role in designing and understanding these photocatalysts. Using an ultrafast surface-enhanced Raman thermometry technique, we probe the effective temperature, equivalent to the mode-specific increase of vibrational kinetic energy, of molecules adsorbed to gold nanoparticle aggregates in the most active hot spots on the picosecond time scale of chemical reactivity. This represents the first measurement of vibrational energy deposition for coupled molecular-plasmonic systems on the picosecond time scale of molecular motion. We find that upon plasmon excitation, the adsorbates in the hot spots undergo an initial energy transfer within several picoseconds that changes the effective temperature of the system by less than 100 K, even at peak flux values 10 8 times stronger than focused sunlight. The energy quickly dissipates from the adsorbates into the surroundings in less than 5 ps, even at the highest values of photoexcitation. This surprisingly modest energy transfer of the most active regions of the plasmonic materials on the ultrafast time scale decisively proves that most plasmonic photocatalysis is not primarily thermally driven.

Hot electrons generated through plasmonic excitations in metal nanostructures show great promise for efficiently driving chemical reactions with light. However, the lifetime, yield, and mechanism of action of plasmon-generated hot electrons involved in a given photocatalytic process are not well understood. Here, we develop ultrafast surface-enhanced Raman scattering (SERS) as a direct probe of plasmon-molecule interactions in the plasmon-catalyzed dimerization of 4-nitrobenzenethiol to p,p'-dimercaptoazobenzene. Ultrafast SERS probing of these molecular reporters in plasmonic hot spots reveals transient Fano resonances, which we attribute to near-field coupling of Stokes-shifted photons to hot electron-driven metal photoluminescence. Surprisingly, we find that hot spots that yield more photoluminescence are much more likely to drive the reaction, which indirectly proves that plasmon-generated hot electrons induce the photochemistry. These ultrafast SERS results provide insight into the relative reactivity of different plasmonic hot spot environments and quantify the ultrafast lifetime of hot electrons involved in plasmon-driven chemistry.

Ultrafast surface-enhanced Raman spectroscopy (SERS) with pico- and femtosecond time resolution has the ability to elucidate the mechanisms by which plasmons mediate chemical reactions. Here we review three important technological advances in these new methodologies, and discuss their prospects for applications in areas including plasmon-induced chemistry and sensing at very low limits of detection. Surface enhancement, arising from plasmonic materials, has been successfully incorporated with stimulated Raman techniques such as femtosecond stimulated Raman spectroscopy (FSRS) and coherent anti-Stokes Raman spectroscopy (CARS). These techniques are capable of time-resolved measurement on the femtosecond and picosecond time scale and can be used to follow the dynamics of molecules reacting near plasmonic surfaces. We discuss the potential application of ultrafast SERS techniques to probe plasmon-mediated processes, such as H2 dissociation and solar steam production. Additionally, we discuss the possibilities for high sensitivity SERS sensing using these stimulated Raman spectroscopies.