Search

Reconfigurable intelligent surface (RIS) is one of the promising technologies for sixth generation communications due to its advantages including energy saving, high spectral efficiency, etc. However, the non-convex joint beamforming design is a challenge, especially in the multi-hop RIS-assisted communication system. This paper proposes a deep learning-based joint beamforming (DLBF) design, aiming to maximize the system data rate for multi-hop RIS-aided communication systems. The proposed DLBF design consists of the reflection matrices design of all RISs and the transmit beamforming design at the base station, which has a reduced computational complexity. Numerical results show that the proposed DLBF can achieve 1.8 bit/s/Hz sum rate gain compared to the conventional beamforming method for the two-user scenario, which can be enhanced by large-scale users. The sum rate performance can be improved by increasing the number of RISs due to the reflection gain, and corresponding results provide a guidance of the multi-hop number selection for further investigation. [ABSTRACT FROM AUTHOR]

Abstract Reconfigurable intelligent surface (RIS) is a groundbreaking technology that has a significant potential for sixth generation (6G) networks. Its unique capability to control wireless environments makes it an attractive option. However, the spatial diversity increased by assisting users with all deployed RISs, this investigation has two drawbacks the high complexity design, and the received signals by the far RISs are severely attenuated. Therefore, we propose a RIS selection strategy to select the proper RISs as a pre-stage before the joint beamforming between the base station (BS) and RISs to reduce the high complexity of joint beamforming optimization. Furthermore, the joint active and passive beamforming problem based on the selection is formulated. Hence, achieving spatial diversity by examining cooperation between passive beamforming of multi-hop RIS, leads to a challenging problem. To tackle this issue, we design an algorithm for the RIS selection scheme. Also, to relax the non-convexity of the proposed problem, we decouple the problem into solvable subproblems by utilizing the fractional programming (FP) and quadratic transform (QT) optimization methods. Simulation results have demonstrated through different user locations the effectiveness of the selection strategy in performance enhancement by 30% in the sum rate, besides an obvious reduction in the complexity cost than other techniques.

Abstract The security of vehicle communication becomes increasingly important due to the transmission requirement of large-scale security and privacy data in the Internet of Vehicles (IoV). This paper investigates the physical layer secure transmission with reconfigurable intelligent surface (RIS) assistance in the coexistence of vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V). It establishes a communication model for physical layer secure transmission where the eavesdropping user exists. Based on this model, we propose a V2I physical layer secure transmission rate (PLSTR) maximization problem and solve it by employing an alternating optimization algorithm based on generalized Rayleigh entropy and semi-definite relaxation programming so as to obtain optimal V2I base station precoding and RIS reflection coefficient matrix. Simulation results further validate the superiority of the proposed algorithm and analyze the impact of relevant parameters on system performance.

Reconfigurable intelligent surface (RIS) is a groundbreaking technology that has a significant potential for sixth generation (6G) networks. Its unique capability to control wireless environments makes it an attractive option. However, the spatial diversity increased by assisting users with all deployed RISs, this investigation has two drawbacks the high complexity design, and the received signals by the far RISs are severely attenuated. Therefore, we propose a RIS selection strategy to select the proper RISs as a pre-stage before the joint beamforming between the base station (BS) and RISs to reduce the high complexity of joint beamforming optimization. Furthermore, the joint active and passive beamforming problem based on the selection is formulated. Hence, achieving spatial diversity by examining cooperation between passive beamforming of multi-hop RIS, leads to a challenging problem. To tackle this issue, we design an algorithm for the RIS selection scheme. Also, to relax the non-convexity of the proposed problem, we decouple the problem into solvable subproblems by utilizing the fractional programming (FP) and quadratic transform (QT) optimization methods. Simulation results have demonstrated through different user locations the effectiveness of the selection strategy in performance enhancement by 30% in the sum rate, besides an obvious reduction in the complexity cost than other techniques. [ABSTRACT FROM AUTHOR]

The security of vehicle communication becomes increasingly important due to the transmission requirement of large-scale security and privacy data in the Internet of Vehicles (IoV). This paper investigates the physical layer secure transmission with reconfigurable intelligent surface (RIS) assistance in the coexistence of vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V). It establishes a communication model for physical layer secure transmission where the eavesdropping user exists. Based on this model, we propose a V2I physical layer secure transmission rate (PLSTR) maximization problem and solve it by employing an alternating optimization algorithm based on generalized Rayleigh entropy and semi-definite relaxation programming so as to obtain optimal V2I base station precoding and RIS reflection coefficient matrix. Simulation results further validate the superiority of the proposed algorithm and analyze the impact of relevant parameters on system performance. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Signal Processing is the property of Journal of Signal Processing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Signal Processing is the property of Journal of Signal Processing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Telecommunication Engineering is the property of Telecommunication Engineering and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) communication systems relying on hybrid beamforming structures are capable of achieving high spectral efficiency at a low hardware complexity and with low power consumption. Tensor-based joint beamforming with low-cost ultrasonic and RIS-assisted Dual-Hop Hybrid free space optical (FSO) mm Wave massive Multiple Input Multiple Output (MIMO) of vehicle-to-everything (V2X) is proposed. To address the occlusion problem for high-speed mobility of the vehicle, an RIS-assisted mixed FSO-MIMO V2X system is proposed. The low-cost ultrasonic array signal model is developed to solve the accurate direction-of-arrival (DOA) estimation. The ultrasonic-assisted RIS phase shift matrix based on subspace self-organizing iterations is designed to track the beam direction between RIS and vehicle. Specifically, the associated bandwidth-efficiency maximization problem is transformed into a series of subproblems, where the subarray of phase shifters and RIS elements is jointly optimized to maximize each subarray's rate. The vehicle motion state is transformed into a two-dimensional model for prior distribution to calculate the particle weights of the RIS phase. Multi-vehicle Tucker tensor decomposition is used to describe the high-dimensional beam space. We conceive a multi-vehicle joint optimization method for designing the hybrid beamforming matrix of the base station (BS) and the passive beamforming matrix of the RIS. A cascaded channel decomposition method based on Singular Value Decomposition (SVD) is used to obtain the combined matrix beamforming of BS and vehicle. Our simulation results demonstrate the superiority of the proposed method compared to its traditional counterparts. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) is regarded as one of the main enablers in the context of 6G wireless communications. It converts the conventionally uncontrolled wireless channel into a programmed channel. The current interest in these surfaces is extended from just exploring the capabilities of single RIS to further exploring opportunities of employing multiple RIS cooperatively for enhancing network coverage and capacity. Unfortunately, almost all current work of multiple RIS-assisted networks are limited to either cascade or parallel topologies without regarding the most proper distribution according to the corresponding channel qualities and mutual orientations. So, in this paper, we are aiming to gain both benefits of cascaded and parallel topologies through a hybrid RIS networking structure. While cascade topology minimizes path loss and enhances multiplicative gain, the parallel topology is exploited for enriching scattering signatures in the interested region (cluster). First, cascaded grouping is resolved based on consecutive channel qualities through optimal routing technique. Then, a joint active and passive beamforming (JAPBF) problem is assumed over the grouped parallel routes. The spatial diversity problem is formulated as fractional programming (FP) optimization problem. The superiority of the proposed hybrid network is demonstrated through the performed simulation results represented in maximizing the overall achievable sum rate and exploring the sensitivity to location shift due to receiver mobility.

Abstract Integrated sensing and communication (ISAC) has been envisioned as a key enabler in the next-generation wireless networks. In this paper, we consider the joint information and sensing beamforming design in a multi-user and multi-target multi-input multi-output ISAC system, where a transmit BS and a sensing BS collaborate to sense targets, and the transmit BS sends information streams to communication users at the same time. To optimize the sensing performance and guarantee the communication throughput, we formulate a joint beamforming design problem to minimize the trace of the weighted Cramer–Rao bound of target parameters subject to the sum-rate constraint. The problem is challenging to solve due to the intricate non-convex objective function and constraints. We firstly exploit the weighted mean square error minimization (WMMSE) and semidefinite relaxation (SDR) techniques to devise a WMMSE–SDR algorithm that can achieve a KKT point of the problem. The SDR can be shown to be tight for a subproblem in the WMMSE–SDR algorithm, which implies zero duality for the subproblem. Based on this property and fractional programming techniques, we further reformulate the beamforming problem as a min–max form with simple constraints which then can be efficiently solved by first-order min–max optimization algorithms. Finally, the proposed algorithms are evaluated extensively in simulations. Numerical results show that both proposed algorithms can achieve promising performance in sensing and communication, and the low-complexity algorithm has a significantly reduced computation time.

Integrated sensing and communication (ISAC) has been envisioned as a key enabler in the next-generation wireless networks. In this paper, we consider the joint information and sensing beamforming design in a multi-user and multi-target multi-input multi-output ISAC system, where a transmit BS and a sensing BS collaborate to sense targets, and the transmit BS sends information streams to communication users at the same time. To optimize the sensing performance and guarantee the communication throughput, we formulate a joint beamforming design problem to minimize the trace of the weighted Cramer–Rao bound of target parameters subject to the sum-rate constraint. The problem is challenging to solve due to the intricate non-convex objective function and constraints. We firstly exploit the weighted mean square error minimization (WMMSE) and semidefinite relaxation (SDR) techniques to devise a WMMSE–SDR algorithm that can achieve a KKT point of the problem. The SDR can be shown to be tight for a subproblem in the WMMSE–SDR algorithm, which implies zero duality for the subproblem. Based on this property and fractional programming techniques, we further reformulate the beamforming problem as a min–max form with simple constraints which then can be efficiently solved by first-order min–max optimization algorithms. Finally, the proposed algorithms are evaluated extensively in simulations. Numerical results show that both proposed algorithms can achieve promising performance in sensing and communication, and the low-complexity algorithm has a significantly reduced computation time. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) communication systems relying on hybrid beamforming structures are capable of achieving high spectral efficiency at a low hardware complexity and with low power consumption. Tensor-based joint beamforming with low-cost ultrasonic and RIS-assisted Dual-Hop Hybrid free space optical (FSO) mm Wave massive Multiple Input Multiple Output (MIMO) of vehicle-to-everything (V2X) is proposed. To address the occlusion problem for high-speed mobility of the vehicle, an RIS-assisted mixed FSO-MIMO V2X system is proposed. The low-cost ultrasonic array signal model is developed to solve the accurate direction-of-arrival (DOA) estimation. The ultrasonic-assisted RIS phase shift matrix based on subspace self-organizing iterations is designed to track the beam direction between RIS and vehicle. Specifically, the associated bandwidth-efficiency maximization problem is transformed into a series of subproblems, where the subarray of phase shifters and RIS elements is jointly optimized to maximize each subarray’s rate. The vehicle motion state is transformed into a two-dimensional model for prior distribution to calculate the particle weights of the RIS phase. Multi-vehicle Tucker tensor decomposition is used to describe the high-dimensional beam space. We conceive a multi-vehicle joint optimization method for designing the hybrid beamforming matrix of the base station (BS) and the passive beamforming matrix of the RIS. A cascaded channel decomposition method based on Singular Value Decomposition (SVD) is used to obtain the combined matrix beamforming of BS and vehicle. Our simulation results demonstrate the superiority of the proposed method compared to its traditional counterparts.

Reconfigurable intelligent surface (RIS) has been viewed as a promising solution in constructing reconfigurable radio environment of the propagation channel and boosting the received signal power by smartly coordinating the passive elements’ phase shifts at the RIS. Inspired by this emerging technique, this article focuses on joint beamforming design and optimization for RIS-aided hybrid satellite-terrestrial relay networks, where the links from the satellite and base station (BS) to multiple users are blocked. Specifically, a refracting RIS cooperates with a BS, where the latter operates as a half-duplex decode-and-forward relay, in order to strengthen the desired satellite signals at the blocked users. Considering the limited onboard power resource, the design objective is to minimize the total transmit power of both the satellite and BS while guaranteeing the rate requirements of users. Since the optimized beamforming weight vectors at the satellite and BS, and phase shifters at the RIS are coupled, leading to a mathematically intractable optimization problem, we propose an alternating optimization scheme by utilizing singular value decomposition and uplink–downlink duality to optimize beamforming weight vectors, and using Taylor expansion and penalty function methods to optimize phase shifters iteratively. Finally, simulation results are provided to verify the superiority of the proposed scheme compared to the benchmark schemes. [ABSTRACT FROM AUTHOR]

As more challenging demands and potential applications increase in the sixth generation (6G) wireless networks, the future of mobile communications is exciting. Recently proposed intelligent reflecting surface (IRS) is a promising technology for improving the communication performance and building a programmable wireless propagation environment. However, high-precision configuration or perfect phase estimation of the IRS is unfeasible. In this paper, we study the IRS-aided millimeter wave (mmWave) multi-user multi-input multi-output (MIMO) systems with phase errors. Our objective is to maximize the achievable sum rate by joint optimizing the finited-resolution passive beamforming at the IRS, combiner, precoder, and power allocation. We first propose an iteratively sequential update (ISU) algorithm which can significantly reduce the complexity compared with the traditional exhaustive search algorithm (ESA) and cross-entropy (CE) method. Then we propose to use the genetic algorithm (GA) to further enhance the performance. The proposed algorithms can meet the requirements of low complexity and high performance respectively. Simulation results show that the IRS-aided systems can improve communication performance and coverage significantly compared with the conventional system. In addition, we observe that the system performance will not increase continuously with the number of the IRS elements when the total area of the IRS is fixed. [ABSTRACT FROM AUTHOR]

Integrated sensing and communication (ISAC) has been regarded as one of the most promising technologies for future wireless communications. However, the mutual interference in the communication radar coexistence system cannot be ignored. Inspired by the studies of reconfigurable intelligent surface (RIS), we propose a double-RIS-assisted coexistence system where two RISs are deployed for enhancing communication signals and suppressing mutual interference. We aim to jointly optimize the beamforming of RISs and radar to maximize communication performance while maintaining radar detection performance. The investigated problem is challenging, and thus we transform it into an equivalent but more tractable form by introducing auxiliary variables. Then, we propose a penalty dual decomposition (PDD)-based algorithm to solve the resultant problem. Moreover, we consider two special cases: the large radar transmit power scenario and the low radar transmit power scenario. For the former, we prove that the beamforming design is only determined by the communication channel and the corresponding optimal joint beamforming strategy can be obtained in closed-form. For the latter, we minimize the mutual interference via the block coordinate descent (BCD) method. By combining the solutions of these two cases, a low-complexity algorithm is also developed. Finally, simulation results show that both the PDD-based and low-complexity algorithms outperform benchmark algorithms. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surfaces (RIS) have been actively researched as a potential technique for future wireless communications, which intelligently ameliorate the signal propagation environment. In the conventional design, each RIS element configures and reflects its received signal independently of all other RIS elements, which results in a diagonal phase shift matrix. By contrast, we propose a novel RIS architecture, where the incident signal impinging on one element can be reflected from another element after an appropriate phase shift adjustment, which increases the flexibility in the design of RIS phase shifts, hence, potentially improving the system performance. The resultant RIS phase shift matrix also has off-diagonal elements, as opposed to the pure diagonal structure of the conventional design. Compared to the state-of-art fully-connected/group-connected RIS structures, our proposed RIS architecture has lower complexity, while attaining a higher channel gain than the group-connected RIS structure, and approaching that of the fully-connected RIS structure. We formulate and solve the problem of maximizing the achievable rate of our proposed RIS architecture by jointly optimizing the transmit beamforming and the non-diagonal phase shift matrix based on alternating optimization and semi-define relaxation (SDR) methods. Moreover, the closed-form expressions of the channel gain, the outage probability and bit error ratio (BER) are derived. Simulation results demonstrate that our proposed RIS architecture results in an improved performance in terms of the achievable rate compared to the conventional architecture, both in single-user as well as in multi-user scenarios. [ABSTRACT FROM AUTHOR]

Cell-free massive multiple-input multiple-output (MIMO) and intelligent reflecting surface (IRS) are considered as the prospective multiple antenna technologies for beyond the fifth-generation (5G) networks. Cell-free MIMO systems powered by IRSs, combining both technologies, can further improve the performance of cell-free MIMO systems at low cost and energy consumption. Prior works focused on instantaneous performance metrics and relied on alternating optimization algorithms, which impose huge computational complexity and signaling overhead. To address these challenges, we propose a novel two-step algorithm that provides the long-term passive beamformers at the IRSs using statistical channel state information (S-CSI) and short-term active precoders and long-term power allocation at the access points (APs) to maximize the minimum achievable rate. Simulation results verify that the proposed scheme outperforms benchmark schemes and brings a significant performance gain to the cell-free MIMO systems powered by IRSs. [ABSTRACT FROM AUTHOR]

We consider a mobile edge computing scenario where a number of devices want to perform a linear inference ${W}{x} $ on some local data $ {x}$ given a network-side matrix $ {W}$. The computation is performed at the network edge over a number of edge servers. We propose a coding scheme that provides information-theoretic privacy against $z$ colluding (honest-but-curious) edge servers, while minimizing the overall latency—comprising upload, computation, download, and decoding latency—in the presence of straggling servers. The proposed scheme exploits Shamir’s secret sharing to yield data privacy and straggler mitigation, combined with replication to provide spatial diversity for the download. We also propose two variants of the scheme that further reduce latency. For a considered scenario with 9 edge servers, the proposed scheme reduces the latency by 8% compared to the nonprivate scheme recently introduced by Zhang and Simeone, while providing privacy against an honest-but-curious edge server. [ABSTRACT FROM AUTHOR]

In this paper, we propose multi-input multi-output (MIMO) beamforming designs towards joint radar sensing and multi-user communications. We employ the Cramér-Rao bound (CRB) as a performance metric of target estimation, under both point and extended target scenarios. We then propose minimizing the CRB of radar sensing while guaranteeing a pre-defined level of signal-to-interference-plus-noise ratio (SINR) for each communication user. For the single-user scenario, we derive a closed form for the optimal solution for both cases of point and extended targets. For the multi-user scenario, we show that both problems can be relaxed into semidefinite programming by using the semidefinite relaxation approach, and prove that the global optimum can be generally obtained. Finally, we demonstrate numerically that the globally optimal solutions are reachable via the proposed methods, which provide significant gains in target estimation performance over state-of-the-art benchmarks. [ABSTRACT FROM AUTHOR]

Abstract In multi-antenna simultaneous wireless information and power transfer (SWIPT) system, beamforming strategy has been widely analyzed due to the increasing signal strength. It can not only increase the signal strength in the direction of the antenna array but also reduce the interference strength, which is a good option for SWIPT system to achieve directional transmission of information and energy. However, the traditional beamforming strategy only uses single beamforming vector, and it does not consider the differences between information and energy in SWIPT system. Actually, interference can also be collected as energy. Based on the traditional beamforming strategy, the resources in SWIPT system are not properly utilized. Therefore, this paper proposes a joint beamforming strategy in multi-input and single-output (MISO) SWIPT system. We extend the traditional single beamforming vector into two beamforming vectors to realize independent control of information and energy based on time switching (TS) receiving mode. In information receiving phase, information beamforming vector is used to carry specific user’s information for information alignment. Since there is an orthogonal relationship between information beamforming vector and channel gain vector, we can achieve to eliminate interference and realize error-free information transmission. In energy receiving phase, energy beamforming vector is used to carry user’s energy. Energy beamforming vector and channel gain vector do not require the orthogonality so that the interference can also be collected as energy. In this paper, we model it as a transmission power optimization (TPO) problem, which is a complex non-convex problem. We firstly transform it into a convex problem, and then, it can be solved using CVX toolbox. Simulation results show that the proposed strategy could increase the energy collection at the same transmission power and also decrease the transmission power at the same energy collection.

In cellular networks, global channel state information (CSI) shall be shared among neighboring cells to mitigate various inter-cell interference (ICI). In this paper, we propose that comparable ICI is mitigated while weak ICI is treated as noise. The amount of shared CSI is highly reduced, because of that only the CSI corresponding to comparable ICI is shared among neighboring cells. In the case of single user equipment in each cell, a joint singular value decomposition and interference alignment method is proposed along with the analysis of its approximate sum rate. Some nodes select singular value decomposition method, while others choose interference alignment method. The method at each node is determined by global selection principle or user classification principle. In the case of multiple UEs in each cell, all nodes utilize minimum mean square error method, but ICI is neglected at cell center users. Copyright © 2014 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

A MIMO two-hop relay network with power-splitting-based relaying is considered. Using a minimum mean-square-error criterion, the joint source-relay optimization problem with transmit power constraint and relay energy harvesting constraint is formulated. In order to address this non-convex problem, an iterative algorithm is proposed which converges to a local optimum. The Lagrangian dual function and successive convex approximation are used for solution. To reduce the computational complexity, a diagonalizing beamforming scheme is employed using singular value decomposition, water-filling and successive convex approximation. Results for MSE versus iterations and bit-error-rate versus signal-to-noise ratio demonstrate the good performance of the proposed schemes. [ABSTRACT FROM PUBLISHER]