Search

A novel fiber sensor which can detect the concentration of copper ions indirectly was proposed and demonstrated by coating the knotted-shaped fiber with chitosan. The diameter of the knotted-shaped fiber was determined to be 10 mm. The Mach-Zehnder Interference generated due to bending deformation that excited some core-modes into higher order cladding-modes and two modes interfered. Chitosan was selected as the identification material for coating the fiber. In order to enhance the chelation between chitosan and copper ions, and improve the sensitivity of copper ions, glutaraldehyde was used to chemically modify chitosan. The original fiber sensor was annealed to obtain a stable structure, and then it was immersed in the modified chitosan solution and deionized water to form an available chitosan coating on the surface of the sensor. In the detection experiment with copper ions concentration of 0-330 ppm, the results show that interference spectra uniformly red-shift with the increase of the copper ions concentration and the sensitivity of the copper ion was 24.6 pm/10ppm. At the same time, ideal spectral fluctuations were demonstrated in the stability inquiry experiments.

A novel high-sensitive fiber-optic Fabry-Perot sensor with parallel polymer-air cavities based on Vernier effect was proposed and demonstrated for simultaneous measurement of pressure and temperature. The sensor is composed of two parallel Fabry-Perot cavities both are fabricated by splicing a section of silica tube to the single-mode fiber. One cavity is filled with polydimethylsiloxane, and the other cavity is filled with a thin layer of ultraviolet glue at the end-face of silica tube, ensuring that the free spectrum ranges of two Fabry-Perot cavities are similar and generate the Vernier effect. The Fabry-Perot interferometer filled with polydimethylsiloxane was found to be sensitive to pressure as well as temperature, whereas the Fabry-Perot interferometer filled with a thin layer of ultraviolet glue was sensitive to pressure only. Owing to the different features of two Fabry-Perot interferometers, the sensor achieved simultaneous measurement of pressure and temperature. Combined with Vernier effect, the sensor provided a pressure sensitivity of −36.93 nm/MPa and a temperature sensitivity of 10.29 nm/°C, respectively. The sensor has exhibited potential applications in fields of medical diagnostics, environmental monitoring, and biological sensing.

A novel high sensitivity all-fiber Fabry-Perot interferometer (FPI) gas refractive index (RI) sensor based on hole-assisted one-core fiber (HAOCF) and Vernier effect was proposed and demonstrated. The sensor is fabricated by splicing a section of HAOCF to a section of silica tube (ST) fused with the lead-in single-mode fiber (SMF), ensuring that the sensor is composed of an air-cavity FPI and a silica-cavity FPI. The cascaded dual-cavities generate the Vernier effect due to a similar free spectrum range (FSR), which significantly improve the sensitivity of the sensor. Owing to the air hole in the cladding of the HAOCF, gases with different RI can enter or leave the in-fiber air cavity, which makes the device usable as a gas RI sensor. The sensor was used to monitor the RI changes of air with different pressures and provided a high sensitivity of −9462.4 nm/RIU. The proposed sensor has a potential to find further applications in the fields of gas composition detection, medical diagnostics and environmental monitoring.

A novel high sensitivity temperature sensor based on polydimethylsiloxane (PDMS) coated the Multi-Thin-Multi mode Fiber was presented. The reliable material PDMS with higher negative thermal optical coefficient and thermal expansion coefficient was selected to improve the sensitivity of the optical fiber’s temperature sensing. A section of thin-mode fiber was connected in the middle of two multi-mode fibers, so as to form the Multi-Thin-Multi mode Fiber structure, which can make the light in the cladding better interact with the external PDMS. For the two dips of the interference spectra, the temperature sensitivities of the original fiber sensor were 47.14 pm/°C and 0.093 dB/°C. After the sensing part of the fiber was coated, its temperature sensitivities were become as 75.04 pm/°C and 0.231 dB/°C, which 1.6 and 2.5 times improved, respectively. In the temperature stability experiment, a standard deviation of the wavelength variation was established to demonstrate the good stability of the sensor.

We design a high-sensitivity optical-fiber sensor for measurements of displacement and refractive index based on dual-coating-stripped loop-shaped single-mode fibers. For this, we produced two unrelated interference dips as a consequence of different radii of two loop-shaped fibers. Since loop-shaped optical fibers are assigned different tasks at the same time, the two dips present their own characteristics; thus, the parameters of displacement and refractive index can be measured by these two loop-shaped fibers. In order to ensure the accuracy of experimental data, we carried experiments with increasing and decreasing displacement and refractive index. The experimental results show that the refractive index and displacement sensitivities of the sensor are 290.35 nm/RIU,† 321.35 nm/RIU, and – 554.40 pm/μm, respectively.

In order to choose the related sampling ratio in the information-poor and information-rich spectral fragments, this paper attempts to recover the spectral reflectance by compressed sensing technology based on maximum entropy criterion. The maximum entropy threshold method is the criterion that the optimal threshold is determined to segment the information content of spectral curves. The spectral reflectance in each sub-spectral fragment is reconstructed by compressed sensing. The wavelet orthogonal matrix performs a sparse representation of each segmented spectral curve. Undersampling spectral curve be collected by random gaussian measurement matrix. The orthogonal matching pursuit algorithm recovers sparse original signals from undersampling observed signals. In this paper, the four standard color blocks of Munsell and the spectral curves of five types of ground objects in the hyperspectral data set are used as the exper-imental objects. The reconstructed results are evaluated by spectral curve reconstruction, root mean square error and information entropy difference. The experimental results show that our approach improves the reconstruction accuracy of spectral reflectance effectively, compared with the traditional method.

A high sensitivity fiber-optic pressure sensor based on Fabry-Perot interferometer filled with ultraviolet (UV) glue film and Vernier effect was proposed and demonstrated. The sensor is composed of a sensing Fabry-Perot (FP) cavity and a reference FP cavity in parallel. The sensing cavity is fabricated by splicing a section of silica tube (ST) to the lead-in single-mode fiber (SMF), and filling a thin layer of UV glue at the end-face of the ST. The reference cavity is made by sandwiching a section of ST between two SMF. The parallel cavities generate the Vernier effect due to a similar free spectrum range, which significantly improves the sensitivity of the sensor. The proposed sensor with good repeatability and reliability was used to monitor the change of air pressure, and provided a high sensitivity of −38.3 nm/MPa. The sensor exhibited the potential applications in the fields of aerospace industry, biological diagnostics and environmental monitoring.

A high sensitivity micro/nano-fiber sensor with asymmetric double tapered structure based on Mach-Zehnder interferometer (MZI) was designed for refractive index (RI) and humidity measurements. The sensor is composed of two different lengths tapered region fabricated in a single-mode fiber, which demonstrated higher sensitivity and better integration with material compared to conventional double tapered fiber sensor. The results showed that the RI sensitivity of the fabricated sensor was 68.6 nm/RIU with the RI ranged from 1.348 to 1.403. Furthermore, the sensing region was deposited with graphene for humidity detection, and the graphene has exhibited great enhancement in terms of sensing performance. The obtained humidity sensitivity of the fabricated sensor was 68.7 pm/%RH with the environment humidity ranged from 50 to 90 %. This work provides a new strategy for designing optical fiber sensor by double tapered fiber sensor, which exhibited the immense potential of tapered optical fiber sensor for future advancements.

A novel composite structured all-fiber sensor was designed and experimentally demonstrated for simultaneous measurement of displacement and temperature. The sensor consists of a knotted shape core cladding optical fiber. The interferometer notch of a knotted shape fiber was found to be highly sensitive to the micro-displacement as well as environmental temperature, while the core-offset fiber was sensitive to temperature only. Thus the different features of these interferometer notchs of two parts can be used to measure the displacement and temperature. The experimental results showed that the sensor exhibited a high displacement sensitivity of −528.57 pm/μm ranges from 0 mm to 0.012 mm. And the temperature sensitivities of the knotted shape core cladding optical fiber were −114.86 pm/℃ and 31.66 pm/℃ ranges from 35 ℃ to 60℃, respectively. Due to the compact size and dual-parameters measurability, the sensor had a great potential in diverse sensing application.

We presented a passively Q-switched (PQS) diode-pumped c-cut Tm, Ho:LuVO4 laser with a black phosphorus saturable absorber for the first time. Under PQS mode, an average output power of 0.86 W and a peak power of 2.32 W were acquired from the Tm, Ho:LuVO4 laser with the pump power of 14.55 W, corresponding to a pulse width of 2.89 μ s , a pulse repetition rate of 71.84 kHz, and a pulse energy of about 6.70 μ J .