Search

Spatiotemporal sculpturing of light pulse with ultimately sophisticated structures represents the holy grail of the human everlasting pursue of ultrafast information transmission and processing as well as ultra-intense energy concentration and extraction. It also holds the key to unlock new extraordinary fundamental physical effects. Traditionally, spatiotemporal light pulses are always treated as spatiotemporally separable wave packet as solution of the Maxwell's equations. In the past decade, however, more generalized forms of spatiotemporally nonseparable solution started to emerge with growing importance for their striking physical effects. This roadmap intends to highlight the recent advances in the creation and control of increasingly complex spatiotemporally sculptured pulses, from spatiotemporally separable to complex nonseparable states, with diverse geometric and topological structures, presenting a bird's eye viewpoint on the zoology of spatiotemporal light fields and the outlook of future trends and open challenges., Comment: This is the version of the article before peer review or editing, as submitted by an author to Journal of Optics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it

Through rational chemical design, and thanks to the hybrid nature of metal-organic frameworks (MOFs), it is possible to prepare molecule-based 2D magnetic materials stable at ambient conditions. Here, we illustrate the versatility of this approach by changing both the metallic nodes and the ligands in a family of layered MOFs that allows the tuning of their magnetic properties. Specifically, the reaction of benzimidazole-type ligands with different metal centres (MII = Fe, Co, Mn, Zn) in a solvent-free synthesis produces a family of crystalline materials, denoted as MUV-1(M), which order antiferromagnetically with critical temperatures that depend on M. Furthermore, the incorporation of additional substituents in the ligand results in a novel system, denoted as MUV-8, formed by covalently bound magnetic double-layers interconnected by van der Waals interactions, a topology that is very rare in the field of 2D materials and unprecedented for 2D magnets. These layered materials are robust enough to be mechanically exfoliated down to a few layers with large lateral dimensions. Finally, the robustness and crystallinity of these layered MOFs allow the fabrication of nanomechanical resonators that can be used to detect -- through laser interferometry -- the magnetic order in thin layers of these 2D molecule-based antiferromagnets., Comment: Main Text + Supplementary Information

We demonstrate a novel dispersion-scan (d-scan) scheme for single-shot temporal characterization of ultrashort laser pulses. The novelty of this method relies on the use of a highly dispersive crystal featuring antiparallel nonlinear domains with a random distribution and size. This crystal, capable of generating a transverse second-harmonic signal, acts simultaneously as the dispersive element and the nonlinear medium of the d-scan device. The resulting in-line architecture makes the technique very simple and robust, allowing the acquisition of single-shot d-scan traces in real time. In addition, the technique can be further simplified by avoiding the need of dispersion pre-compensation. The retrieved pulses are in very good agreement with independent FROG measurements. We also apply the new single-shot d-scan to a TW-class laser equipped with a programmable pulse shaper, obtaining an excellent agreement between the applied and the d-scan retrieved dispersions., Comment: 7 pages, 5 figures

The use of structured ultrashort pulses with coupled spatiotemporal properties is emerging as a key tool for ultrafast manipulation. Ultrafast vector beams are opening exciting opportunities in different fields such as microscopy, time-resolved imaging, nonlinear optics, particle acceleration or attosecond science. Here, we implement a technique for the full characterization of structured time-dependent polarization light waveforms with spatiotemporal resolution, using a compact twofold spectral interferometer, based on in-line bulk interferometry and fibre-optic coupler assisted interferometry. We measure structured infrared femtosecond vector beams, including radially polarized beams and complex-shaped beams exhibiting both temporal and spatial evolving polarization. Our measurements confirm that light waveforms with polarization evolving at the micrometer and femtosecond scales can be achieved through the use of structured waveplates and polarization gates. This new scale of measurement achieved will open the way to predict, check and optimize applications of structured vector beams at the femtosecond and micrometer scales., Comment: Information: 37 pages, 15 figures, final version. This work was partially supported by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action with grant agreement No. 798264, project FastMeasure entitled 'Development and industry transfer of new techniques: full characterization of vector ultrashort pulsed laser beams'

Focusing control of ultrashort pulsed beams is an important research topic, due to its impact to subsequent interaction with matter. In this work, we study the propagation near the focus of ultrashort laser pulses of ~25 fs duration under diffractive focusing. We perform the spatio-spectral and spatio-temporal measurements of their amplitude and phase, complemented by the corresponding simulations. With them, we demonstrate that pulse shaping allows modifying in a controlled way not only the spatio-temporal distribution of the light irradiance in the focal region, but also the way it propagates as well as the frequency distribution within the pulse (temporal chirp). To gain a further intuitive insight, the role of diverse added spectral phase components is analyzed, showing the symmetries that arise for each case. In particular, we compare the effects, similarities and differences of the second and third order dispersion cases., Comment: Information: 11 pages, 6 figures. Date of Publication: 12 April 2018. This work was partially supported by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action with grant agreement No. 798264, project FastMeasure entitled 'Development and industry transfer of new techniques: full characterization of vector ultrashort pulsed laser beams'

The growing use of ultrashort laser pulses exhibiting time-varying polarization (vector pulses) demands simple and robust characterization techniques capable to perform measurements in a broad range of experimental and environmental conditions. Here we present in-line, single-channel setup based on spectral interferometry to characterize ultrashort vector pulses. The use of a bulk interferometer based on birefringence is key for the stability and sensitivity of the technique, thus being simple and highly robust. The technique is used to measure vector pulses corresponding to polarization gates, which are used in many applications. Those results are validated by simulations. The technique here presented has a number of potential applications in nonlinear effects (e.g. transient birefringence and nonlinear phenomena with vector pulses)., Comment: Information: 11 pages, 5 figures. Date of Publication: 27 March 2019. This work was partially supported by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action with grant agreement No. 798264, project FastMeasure entitled 'Development and industry transfer of new techniques: full characterization of vector ultrashort pulsed laser beams'

Soliton self-compression is demonstrated during the propagation of high spatial modes in hollow core fibers in the near-infrared spectral region, taking advantage of their negative dispersion response. We have found that there is always an optimum spatial mode to observe this phenomenon, compressing the pulses down to the single-cycle regime without needing any external compression device and with a consequent increase in the output peak power. Our result is relevant for any ultrashort laser application in which few- or single-cycle pulses are crucial., Comment: 8 pages, 4 figures

In most applications of ultrashort pulse lasers, temporal compressors are used to achieve a desired pulse duration in a target or sample, and precise temporal characterization is important. The dispersion-scan (d-scan) pulse characterization technique usually involves using glass wedges to impart variable, well-defined amounts of dispersion to the pulses, while measuring the spectrum of a nonlinear signal produced by those pulses. This works very well for broadband few-cycle pulses, but longer, narrower bandwidth pulses are much more difficult to measure this way. Here we demonstrate the concept of self-calibrating d-scan, which extends the applicability of the d-scan technique to pulses of arbitrary duration, enabling their complete measurement without prior knowledge of the introduced dispersion. In particular, we show that the pulse compressors already employed in chirped pulse amplification (CPA) systems can be used to simultaneously compress and measure the temporal profile of the output pulses on-target in a simple way, without the need of additional diagnostics or calibrations, while at the same time calibrating the often-unknown differential dispersion of the compressor itself. We demonstrate the technique through simulations and experiments under known conditions. Finally, we apply it to the measurement and compression of 27.5 fs pulses from a CPA laser., Comment: 11 pages, 5 figures, Scientific Reports, in press

In this work we study the impact of chromatic focusing of few-cycle laser pulses on high-order harmonic generation (HHG) through analysis of the emitted extreme ultraviolet (XUV) radiation. Chromatic focusing is usually avoided in the few-cycle regime, as the pulse spatio-temporal structure may be highly distorted by the spatiotemporal aberrations. Here, however, we demonstrate it as an additional control parameter to modify the generated XUV radiation. We present experiments where few-cycle pulses are focused by a singlet lens in a Kr gas jet. The chromatic distribution of focal lengths allows us to tune HHG spectra by changing the relative singlet-target distance. Interestingly, we also show that the degree of chromatic aberration needed to this control does not degrade substantially the harmonic conversion efficiency, still allowing for the generation of supercontinua with the chirped-pulse scheme, demonstrated previously for achromatic focussing. We back up our experiments with theoretical simulations reproducing the experimental HHG results depending on diverse parameters (input pulse spectral phase, pulse duration, focus position) and proving that, under the considered parameters, the attosecond pulse train remains very similar to the achromatic case, even showing cases of isolated attosecond pulse generation for near single-cycle driving pulses., Comment: 8 pages, 7 figures