Search

In the current study, we explicitly address the impacts of urban irrigation on the local hydrological cycle by integrating a previously developed irrigation scheme within the coupled framework of the Weather Research and Forecasting-Urban Canopy Models (WRF-UCM) over the semiarid Los Angeles metropolitan area. We focus on the impacts of irrigation on the urban water cycle and atmospheric feedback. Our results demonstrate a significant sensitivity of WRF-UCM simulated surface turbulent fluxes to the incorporation of urban irrigation. Introducing anthropogenic moisture, vegetated pixels show a shift in the energy partitioning toward elevated latent heat fluxes. The cooling effects of irrigation on daily peak air temperatures are evident over all three urban types, with the largest influence over low-intensity residential areas (average cooling of 1.64°C). The evaluation of model performance via comparison against CIMIS (California Irrigation Management Information System) evapotranspiration (ET) estimates indicates that WRF-UCM, after adding irrigation, performs reasonably during the course of the month of July, tracking day-to-day variability of ET with notable consistency. In the nonirrigated case, CIMIS-based ET fluctuations are significantly underestimated by the model. Our analysis shows the importance of accurate representation of urban irrigation in modeling studies, especially over water-scarce regions such as the Los Angeles metropolitan area. We also illustrate that the impacts of irrigation on simulated energy and water cycles are more critical for longer-term simulations due to the interactions between irrigation and soil moisture fluctuations.

While wildfires are a natural occurrence and ecosystems have evolved with fire, a changing climate is extending the wildfire season increasing the number, size and severity of fires in the western United States. In 2018, wildfire consumed 30% more area in the Western United States than the average ten years prior, and 76% more area than the average twenty years ago. These recent wildfires have impacted communities in the southwestern Rocky Mountains. In 2018, the 416 Fire, burned over 21,000 ha of public and private lands in southwestern Colorado. The 416 Fire is uniquely located in a legacy mine region in Colorado. The fire occurred in the Animas River watershed, which was already recovering from impacts of the Gold King Mine release of 2015. Three years of water quality monitoring after the 416 Fire have demonstrated elevated total and dissolved metal concentrations downstream of the burn area in Hermosa Creek and the Animas River. Following high-intensity rainstorm events, concentrations of metals such as aluminum, cadmium, iron, lead, manganese and zinc were significantly higher compared to pre-fire conditions in the burned watershed, and several metals often exceeded water quality standards for aquatic life. Macroinvertebrate monitoring in the Animas River and the main fire-impacted tributary indicate substantially altered insect communities. Macroinvertebrate tissue samples, with high concentrations of aluminum, iron, lead and nickel provide evidence that metals observed in the water column of fire-impacted streams were transferred to the benthic communities. In contrast, algae tissue from below the fire did not have elevated metals. High sediment volumes with absorbed metals from mineral rich and mined hillsides were transported to the streams and their aquatic ecosystems after the fire. Results from this study highlight the post-fire mobilization of naturally occurring metals to streams that already experience elevated metals from legacy mines, and will help in development of mitigation efforts in downstream communities., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Managing river temperature in highly urbanized stream systems is critical for maintaining aquatic ecosystems and associated beneficial uses. In this work, we updated and utilized a mechanistic river temperature model, i-Tree Cool River, to evaluate the cooling impacts of two ecological restoration scenarios: (1) an alternative streambed material limecrete and (2) shading effects of tree planting in riparian areas. The i-Tree Cool River model was modified to account for diurnal fluctuations of streambed temperature, which is relevant in shallow urban streams where lack of natural shading combined with low heat capacity of the water column can make diurnal fluctuations relatively extreme. The model was calibrated and validated on a 4.2 km reach of Compton Creek in the Los Angeles River watershed, California. Two native fish, arroyo chub (Gila orcuttii) and unarmored threespine stickleback (Gasterosteus aculeatus williamsoni), were considered the target species for assessing thermal habitat suitability. Key findings include: (1) model performance was improved when accounting for diurnal fluctuations in bed temperature (R 2 increased from 0.43 to 0.68); and (2) substrate rehabilitation and tree planting can potentially reduce summertime temperatures to within the documented spawning temperature thresholds for the focal fish species. Using limecrete as an alternative material for the concrete bottom decreased the median river temperature metrics: maximum weekly maximum, maximum weekly average, and minimum weekly minimum temperatures by an average of 3 °C (13%) to 20.4 °C, 19.7 °C, and 17.8 °C, respectively. Tree planting in the riparian corridor decreased the average river temperature metrics by an average of 0.9 °C (4%) to 22.7 °C, 22 °C, and 19 °C, respectively. Combining the two scenarios decreased the river temperature metrics by an average of 4 °C (18%) to 18.2 °C. Therefore, water temperature would not be a limiting factor in potential reintroduction of the focal fish species to Compton Creek if restoration were implemented. Implications of this work could be used by urban forest and water managers for restoring thermally polluted rivers in other urban areas., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A new Green Infrastructure Placement Tool coupled with Storm Water Management Model (GIP-SWMM) is developed for selection and strategic placement of Green Infrastructure (GI) practices. The tool supports GI placement at multiple scales - from a few city blocks to large watersheds. GI is a multi-benefit option for stormwater management and can revitalize communities while reducing sewage overflows and improving runoff quality. However, cost-effective planning and placement of GI to achieve management goals remains a challenge and requires an integrated watershed approach. An optimization approach was developed coupled with the SWMM to find optimal combination and placement of GI to meet target flow and pollutant load reduction while minimizing cost at a watershed scale. The tool includes 13 GI types and selection and placement of GI within a watershed is based on their capital cost and effectiveness. The tool generates cost-effectiveness curves (cost vs size of GIs) for discharge and pollutants. GIP-SWMM provides a means for objective analysis of managing alternatives among multiple interacting and competing options. The desired outcome from the system application is a thorough, practical, and informative assessment considering economic, and engineering factors. The performance of the tool was evaluated in the Meade-Hawthorne drainage basin in Rapid City, South Dakota. GI placement options were assessed for multiple target levels for discharge, TSS, E coli, and Fecal coliform. Cost-effectiveness curves were developed for discharge, TSS, E coli, and Fecal coliform. Total GI cost increased as the target discharge, TSS, E coli, and Fecal coliform concentration at the outlet of the watershed was reduced. The tool placed a larger percentage of the GIs at the locations where most of the discharge and pollutant loads originated. This case study demonstrates that GIP-SWMM is a planning level decision support framework that allows for optimization of GIs and is adaptable for use in addressing regulatory compliance and practices across the U.S., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Urbanization can dramatically alter stormwater, both the quantity and quality, by engendering larger peak flows and through the introduction of contaminants into runoff. The current study builds on previous research that developed relationships between a suite of nonpoint source contaminants, known as trace organic contaminants (TOrCs), and hydrologic measurements for a series of storms (one site had 15 storms and the other had 19 storms) in Madison, WI, by creating statistical and deterministic models. Correlations and regressions were calculated between TOrC loads and hydrologic measurements for a series of storms for both a commercial site and a high-density residential site. From the regressions, it became evident that loading responses to precipitation were not the same between the two land covers for some TOrCs, indicating varying load responses for TOrCs depending on land cover. The regressions were utilized in the Source Loading and Management Model for Windows (WinSLAMM), an event-based hydrologic and water-quality model, to demonstrate that it can be used to model novel contaminants. The regressions were also used to estimate mean annual loads of TOrCs from all commercial and high-density residential areas in Madison, WI, for the watersheds to which Madison discharges its stormwater. The mean annual loads varied between grams per year to tens of thousands of grams per year depending on the TOrC and watershed. This work will ultimately allow managers to simulate the presence of, establish total maximum daily loads for, and mitigate the loads of TOrCs through stormwater best management practices., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Urban-use pesticides are of increasing concern as they are widely used and have been linked to toxicity of aquatic organisms. To assess the occurrence and treatment of these pesticides in stormwater runoff, an approach combining field sampling and watershed-scale modeling was employed. Stormwater samples were collected at four locations in the lower San Diego River watershed during a storm event and analyzed for fipronil, three of its degradation products, and eight pyrethroids. All 12 compounds were detected with frequency ranging from 50 to 100%. Field results indicate pesticide pollution is ubiquitous at levels above toxicity benchmarks and that runoff may be a major pollutant source to urban surface waters. A watershed-scale stormwater model was developed, calibrated using collected data, and evaluated for pesticide storm load and concentrations under several management scenarios. Modeling results show that enhanced stormwater control measures, such as biochar-amended biofilters, reduce both pesticide storm load and toxicity benchmark exceedances, while conventional biofilters reduce the storm load but provide minimal toxicity benchmark exceedance reduction. Consequently, biochar amendment has the potential to broadly improve water quality at the watershed scale, particularly when meeting concentration-based metrics such as toxicity benchmarks. This research motivates future work to demonstrate the reliability of full-scale enhanced stormwater control measures to treat pollutants of emerging concern.

Acute water shortages for large metropolitan regions are likely to become more frequent as climate changes impact historic precipitation levels and urban population grows. California and Los Angeles County have just experienced a severe four year drought followed by a year of high precipitation, and likely drought conditions again in Southern California. We show how the embedded preferences for distant sources, and their local manifestations, have created and/or exacerbated fluctuations in local water availability and suboptimal management. As a socio technical system, water management in the Los Angeles metropolitan region has created a kind of scarcity lock-in in years of low rainfall. We come to this through a decade of coupled research examining landscapes and water use, the development of the complex institutional water management infrastructure, hydrology and a systems network model. Such integrated research is a model for other regions to unpack and understand the actual water resources of a metropolitan region, how it is managed and potential ability to become more water self reliant if the institutions collaborate and manage the resource both parsimoniously, but also in an integrated and conjunctive manner. The Los Angeles County metropolitan region, we find, could transition to a nearly water self sufficient system.

The Colorado Water Plan estimates as much as 0.8 million irrigated acres may dry up statewide from agricultural to municipal and industrial transfers. To help mitigate this loss, new sources of water are being explored in Colorado. One such source may be produced water. Oil and gas production in 2016 alone produced over 300 million barrels of produced water. Currently, the most common method of disposal of produced water is deep well injection, which is costly and has been shown to cause induced seismicity. Treating this water to agricultural standards eliminates the need to dispose of this water and provides a new source of water. This research explores which counties in Colorado may be best suited to reusing produced water for agriculture based on a combined index of need, quality of produced water, and quantity of produced water. The volumetric impact of using produced water for agricultural needs is determined for the top six counties. Irrigation demand is obtained using evapotranspiration estimates from a range of methods, including remote sensing products and ground-based observations. The economic feasibility of treating produced water to irrigation standards is also determined using an integrated decision selection tool (iDST). We find that produced water can make a substantial volumetric impact on irrigation demand in some counties. Results from the iDST indicate that while costs of treating produced water are higher than the cost of injection into private disposal wells, the costs are much less than disposal into commercial wells. The results of this research may aid in the transition between viewing produced water as a waste product and using it as a tool to help secure water for the arid west., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Stormwater best management practices (BMPs) are implemented to reduce microbial pollution in runoff, but their removal efficiencies differ. Enhanced BMPs, such as those with media amendments, can increase removal of fecal indicator bacteria (FIB) in runoff from 0.25-log 10 to above 3-log 10 ; however, their implications for watershed-scale management are poorly understood. In this work, a computational model was developed to simulate watershed-scale bacteria loading and BMP performance using the Ballona Creek Watershed (Los Angeles County, CA) as a case study. Over 1400 scenarios with varying BMP performance, percent watershed area treated, BMP treatment volume, and infiltrative capabilities were simulated. Incremental improvement of BMP performance by 0.25-log 10 , while keeping other scenario variables constant, reduces annual bacterial load at the outlet by a range of 0-29%. In addition, various simulated scenarios provide the same FIB load reduction; for example, 75% load reduction is achieved by diverting runoff from either 95% of the watershed area to 25 000 infiltrating BMPs with 0.5-log 10 removal or 75% of the watershed area to 75 000 infiltrating BMPs with 1.5-log 10 removal. Lastly, simulated infiltrating BMPs provide greater FIB reduction than noninfiltrating BMPs at the watershed scale. Results provide new insight on the trade-offs between BMP treatment volume, performance, and distribution.