Search

Different models have been used to evaluate the interfacial Dzyaloshinskii–Moriya interaction (DMI) from the asymmetric bubble expansion method using magneto-optics. Here, we investigate the most promising candidates over a range of different magnetic multilayers with perpendicular anisotropy. Models based on the standard creep hypothesis are not able to reproduce the domain wall (DW) velocity profile when the DW roughness is high. Our results demonstrate that the DW roughness and the interface roughness of the sample layers are correlated. Furthermore, we give guidance on how to obtain reliable results for the DMI value with this popular method. A comparison of the results with Brillouin light scattering (BLS) measurements on the same samples shows that the BLS approach often results in higher measured values of DMI. [ABSTRACT FROM AUTHOR]

We report on the electrical transport properties of Nb based Josephson junctions with Pt/Co 68 B 32 /Pt ferromagnetic barriers. The barriers exhibit perpendicular magnetic anisotropy, which has the main advantage for potential applications over magnetisation in-plane systems of not affecting the Fraunhofer response of the junction. In addition, we report that there is no magnetic dead layer at the Pt/Co 68 B 32 interfaces, allowing us to study barriers with ultra-thin Co 68 B 32 . In the junctions, we observe that the magnitude of the critical current oscillates with increasing thickness of the Co 68 B 32 strong ferromagnetic alloy layer. The oscillations are attributed to the ground state phase difference across the junctions being modified from zero to π . The multiple oscillations in the thickness range 0.2 ⩽ d CoB ⩽ 1.4 nm suggests that we have access to the first zero- π and π -zero phase transitions. Our results fuel the development of low-temperature memory devices based on ferromagnetic Josephson junctions. [ABSTRACT FROM AUTHOR]

A method for detecting dc spin current propagation through an epitaxial antiferromagnetic (AFM) NiO layer is presented. Spin current is generated by spin pumping from an adjoining ferromagnetic (FM) layer and detected in a non-magnetic metallic layer by the inverse spin Hall effect. Comparison is made with a YIG/Pt bilayer, where only the Pt layer is electrically conducting, but for which spin Hall magnetoresistance makes an additional contribution to the measured signal. The signal obtained from the multilayered stack containing the AFM NiO layer is found to contain additional contributions due to anisotropic magnetoresistance. By exciting the sample with out-of-plane rf magnetic field and making measurements with a static field applied at different orientations within the plane of the sample, a signal associated with the dc spin current may be identified. [ABSTRACT FROM AUTHOR]

We demonstrate a Josephson junction with a weak link containing two ferromagnets with perpendicular magnetic anisotropy and independent switching fields in which the critical current can be set by the mutual orientation of the two layers. Such pseudospin-valve Josephson junctions are a candidate cryogenic memory in an all superconducting computational scheme. Here, we use Pt/Co/Pt/CoB/Pt as the weak link of the junction with d Co = 0.6 nm , d CoB = 0.3 nm , and d Pt = 5 nm and obtain a 60% change in the critical current for the two magnetization configurations of the pseudospin-valve. Ferromagnets with perpendicular magnetic anisotropy have advantages over magnetization in-plane systems, which have been exclusively considered at this point, as, in principle, the magnetization and magnetic switching of layers in the junction should not affect the in-plane magnetic flux. [ABSTRACT FROM AUTHOR]

Tapered coplanar waveguides with integrated photoconductors were designed, fabricated, and measured, with pulsed transmission results comparing well with High Frequency Structure Simulator simulations which predict increased confinement and electric field concentration in the tapered region. Devices made with titanium/gold metallisation were used to demonstrate transmission and confinement, while the magnetoresistive properties of devices with cobalt/copper multilayers were used to demonstrate the field concentration. In the latter case, a mathematical framework was developed to understand the relationship between tapering effects and the picosecond magnetoresistance response. [ABSTRACT FROM AUTHOR]

Charge transfer at metallo-molecular interfaces may be used to design multifunctional hybrids with an emergent magnetization that may offer an eco-friendly and tunable alternative to conventional magnets and devices. Here, we investigate the origin of the magnetism arising at these interfaces by using different techniques to probe 3d and 5d metal films such as Sc, Mn, Cu, and Pt in contact with fullerenes and rf-sputtered carbon layers. These systems exhibit small anisotropy and coercivity together with a high Curie point. Low-energy muon spin spectroscopy in Cu and Sc-C60 multilayers show a quick spin depolarization and oscillations attributed to nonuniform local magnetic fields close to the metallo-carbon interface. The hybridization state of the carbon layers plays a crucial role, and we observe an increased magnetization as sp3 orbitals are annealed into sp2-π graphitic states in sputtered carbon/copper multilayers. X-ray magnetic circular dichroism (XMCD) measurements at the carbon K edge of C60 layers in contact with Sc films show spin polarization in the lowest unoccupied molecular orbital (LUMO) and higher π*-molecular levels, whereas the dichroism in the σ*-resonances is small or nonexistent. These results support the idea of an interaction mediated via charge transfer from the metal and dz-π hybridization. Thin-film carbon-based magnets may allow for the manipulation of spin ordering at metallic surfaces using electrooptical signals, with potential applications in computing, sensors, and other multifunctional magnetic devices. [ABSTRACT FROM AUTHOR]

We use ferromagnetic resonance to study the current-induced torques in YIG/heavy metal bilayers. YIG samples with thickness varying from 14.8 nm to 80 nm, with the Pt or Ta thin film on top, are measured by applying a microwave current into the heavy metals and measuring the longitudinal DC voltage generated by both spin rectification and spin pumping. From a symmetry analysis of the FMR lineshape and its dependence on YIG thickness, we deduce that the Oersted field dominates over spin-transfer torque in driving magnetization dynamics. [ABSTRACT FROM AUTHOR]

The temperature dependence of the spin diffusion length typically reflects the scattering mechanism responsible for spin relaxation. Within nonmagnetic metals it is reasonable to expect the Elliot-Yafet mechanism to play a role and thus the temperature dependence of the spin diffusion length might be inversely proportional to resistivity. In lateral spin valves, measurements have found that at low temperatures the spin diffusion length unexpectedly decreases. By measuring the transport properties of lateral Py/Cu/Py spin valves, fabricated from Cu with magnetic impurities of <1 ppm and ~ 4 ppm, we extract a spin diffusion length which shows this suppression below 30 K only in the presence of the Kondo effect. We have calculated the spin-relaxation rate and isolated the contribution from magnetic impurities. We find the spin-flip probability of a magnetic impurity to be 34%. Our analysis demonstrates the dominant role of Kondo scattering in spin relaxation, even in low concentrations of order 1 ppm, and hence illustrates its importance to the reduction in spin diffusion length observed by ourselves and others. [ABSTRACT FROM AUTHOR]

Using scanning thermal microscopy, we have mapped the spatial distribution of temperatures in an operating nanoscale device formed from a magnetic injector, an Ag connecting wire, and a magnetic detector. An analytical model explained the thermal diffusion over the measured temperature range (2-300 K) and injector-detector separation (400-3000 nm). The characteristic diffusion lengths of the Peltier and Joule heat differ remarkably below 60 K, a fact that can be explained by the onset of ballistic phonon heat transfer in the substrate. [ABSTRACT FROM AUTHOR]

The response of Y3Fe5O12/Cu/Ni81Fe19 trilayer structures to excitation by a femtosecond laser pulse has been studied in optical pump-probe experiments and compared with the response of Y3Fe5O12 (YIG) and Ni81Fe19 reference samples. The optical pump induces a partial demagnetization of the Ni81Fe19, a large thermal gradient within the YIG, and temperature differences across the interfaces within the sample stack. When a moderate magnetic field is applied close to normal to the sample plane, so as to quasialign the YIG magnetization with the field and cant the Ni81Fe19 magnetization from the plane, ultrafast demagnetization initiates precession of the Ni81Fe19 magnetization. The transient temperature profile within the samples has been modeled using a one-dimensional finite-element computational model of heat conduction, while the magnetization dynamics are well described by a macrospin solution of the Landau-Lifshitz-Gilbert equation. The precessional response of the Ni81Fe19 layers within the trilayers and the Ni81Fe19 reference sample are very similar for pump fluences of up to 1.5mJ/cm², beyond which irreversible changes to the magnetic properties of the films are observed. These results suggest that the spin Seebeck effect is ineffective in modifying the precessional dynamics of the present YIG/Cu/Ni81Fe19 samples when subject to ultrafast optical excitation. [ABSTRACT FROM AUTHOR]

We report measurements on yttrium iron garnet (YIG) thin films grown on both gadolinium gallium garnet (GGG) and yttrium aluminum garnet (YAG) substrates, with and without thin Pt top layers. We provide three principal results: the observation of an interfacial region at the Pt/YIG interface, we place a limit on the induced magnetism of the Pt layer, and confirm the existence of an interfacial layer at the GGG/YIG interface. Polarized neutron reflectometry (PNR) was used to give depth dependence of both the structure and magnetism of these structures. We find that a thin film of YIG on GGG is best described by three distinct layers: an interfacial layer near the GGG, around 5 nm thick and nonmagnetic, a magnetic "bulk" phase, and a nonmagnetic and compositionally distinct thin layer near the surface. We theorize that the bottom layer, which is independent of the film thickness, is caused by Gd diffusion. The top layer is likely to be extremely important in inverse spin Hall effect measurements, and is most likely Y2O3 or very similar. Magnetic sensitivity in the PNR to any induced moment in the Pt is increased by the existence of the Y2O3 layer; any moment is found to be less than 0.02μB/atom. [ABSTRACT FROM AUTHOR]

We report spin wave propagation experiments in thin yttrium iron garnet (YIG) films. Using time-resolved scanning Kerr microscopy we extract the mode structure of the spin waves. For quasi-single-mode excitation, the spin wave decay can be fitted with a damped harmonic oscillator function providing us with information about the attenuation length. We measure values of about 2.7 and 3.6 μm for the spin wave decay length of 38- and 49-nm-thick YIG samples, respectively. Micromagnetic simulations are performed to compare experimental and simulated modes. The data are in very good agreement with these simulations. [ABSTRACT FROM AUTHOR]