Search

This paper provides an in-depth review of the natural colourants covering their classifications, sources, extraction techniques, application techniques in relation to different textile fibres and their advantages and challenges. The academic readers will find here an overview of the latest developments in extraction and application techniques of a variety of natural colourants. Almost all commercially produced natural fibres and the major synthetic fibres are found to be dyeable and printable with natural colourants. Although the production of natural colourants offers a lot of environmental benefits, their application techniques in textile colouration are not always sound for environment due to the need of synthetic mordants in colouration process. Advances in modern agriculture and biotechnology can play a key role in sorting the limitations of natural colourants and at the same time more and more investigations are still required to establish their cleaner application on textiles.

The extensive use of dyes in numerous industries results in massive dye discharge in the wastewater, which is a major cause of water pollution. Globally, the consumption of dyes is near seven hundred thousand tons across different sectors, of which around 10–15% goes into the wastewater. Among the dye kinds, anionic dyes make up the main proportion, having a 32–90% share in the wastewater. Different plant-derived wastes, which are sustainable given their natural abundance, effectiveness, and low cost, are frequently proposed for dye separation. However, these adsorbents are inherently more suitable for cationic dyes than anionic dyes. In recent years, the modification of these wastes has been progressively considered to suit them to anionic dye removal. These modifications involve mechanical, thermal, or chemical treatments, or combinations. These attempts propose two-way benefits, as one abundant waste is being used to cure another severe problem, and eventually both could be diminished. This review has a key focus on the evaluation of plant-derived adsorbents and their modifications, and particularly for anionic dye adsorption. Overall, the mechanism of adsorption and the suitability of the current methods are discussed, and their future potential is explored.

Lignin is a natural source of UV-shielding materials, though its recalcitrant and heterogeneous structure makes the extraction and purification processes complex. However, lignin’s functionality can be directly utilised when it stays as native with cellulose and hemicellulose in plant biomass, rather than being separated. The fabrication process of this native lignin is sustainable, as it consumes less energy and chemicals compared to purified lignin; thus, it is an economic and more straightforward approach. In this study, the properties of native and purified lignin–cellulose nanocrystals (L–CNCs) sourced from hemp hurd waste were compared to explore the differences in their morphology, UV-shielding properties and chemical structure affected by their distinct fabrication process. These two kinds of L–CNCs were further added into polyvinyl alcohol (PVA) to evaluate their reinforcement characteristics. The resulting native L–CNCs/PVA film showed stronger UV-shielding ability than purified L–CNCs. Moreover, the native L–CNCs showed better compatibility with PVA, while the purified L–CNCs/PVA interfaces showed phase separation. The phase separation in purified L–CNCs/PVA films reduced the films’ tensile strength and Young’s modulus and increased the water vapour transmission. The laboratory-scale cost of native L–CNCs production (~AUD 80/kg) was only 10% of purified L–CNCs (~AUD 850/kg), resulting in a comparatively lower cost for preparing native L–CNCs/PVA composite films. Overall, this study shows that the proposed method of production and use of native L–CNCs can be an economic approach to deliver UV-shielding properties for potential applications, such as food packaging.

The extensive use of dyes in numerous industries results in massive dye discharge in the wastewater, which is a major cause of water pollution. Globally, the consumption of dyes is near seven hundred thousand tons across different sectors, of which around 10–15% goes into the wastewater. Among the dye kinds, anionic dyes make up the main proportion, having a 32–90% share in the wastewater. Different plant-derived wastes, which are sustainable given their natural abundance, effectiveness, and low cost, are frequently proposed for dye separation. However, these adsorbents are inherently more suitable for cationic dyes than anionic dyes. In recent years, the modification of these wastes has been progressively considered to suit them to anionic dye removal. These modifications involve mechanical, thermal, or chemical treatments, or combinations. These attempts propose two-way benefits, as one abundant waste is being used to cure another severe problem, and eventually both could be diminished. This review has a key focus on the evaluation of plant-derived adsorbents and their modifications, and particularly for anionic dye adsorption. Overall, the mechanism of adsorption and the suitability of the current methods are discussed, and their future potential is explored.