Search

This study was aimed at producing single-cell (SCP) protein from the carbohydrate hydrolysate of steam-exploded eucalyptus (Eucalyptus urophylla) wood. Two yeast strains including Saccharomyces cerevisiae and Candida utilis 2.587 were used for batch fermentation. Results showed that the total reducing sugars (TRS), glucose and xylose in hydrolysate had concentrations of 17.52, 10.71, and 4.30 g·L-1, respectively.During fermentation, yeast strains of S. cerevisiae and C. utilis 2.587 used monosaccharides sequentially, and secondary growth occurred. The yeast biomass contained 43.59% crude protein and was rich in all essential amino acids such as lysine, leucine, and valine. Total amino acid reached 401.45 g·kg-1, and corresponded with the standard recommended by the Food and Agriculture Organization of theUnited Nations for amino acids, except sulfur-containing amino acids.

To develop effective mitigation policies, a comprehensive understanding of the evolution of the chemical composition, formation mechanisms, and the contribution of sources at different pollution levels is required. PM2.5 samples were collected for 1 year from August 2016 to August 2017 at an urban site in Zibo, then chemical compositions were analyzed. Secondary inorganic aerosols (SNA), anthropogenic minerals (MIN), and organic matter (OM) were the most abundant components of PM2.5, but only the mass fraction of SNA increased as the pollution evolved, implying that PM2.5 pollution was caused by the formation of secondary aerosols, especially nitrate. A more intense secondary transformation was found in the heating season (from November 15, 2016, to March 14, 2017), and a faster secondary conversion of nitrate than sulfate was discovered as the pollution level increased. The formation of sulfate was dominated by heterogeneous reactions. High relative humidity (RH) in polluted periods accelerated the formation of sulfate, and high temperature in the non-heating season also promoted the formation of sulfate. Zibo city was under ammonium-rich conditions during polluted periods in both seasons; therefore, nitrate was mainly formed through homogeneous reactions. The liquid water content increased significantly as the pollution levels increased when the RH was above 80%, indicating that the hygroscopic growth of aerosol aggravated the PM2.5 pollution. Source apportionment showed that PM2.5 was mainly from secondary aerosol formation, road dust, coal combustion, and vehicle emissions, contributing 36.6%, 16.5%, 14.7%, and 13.1% of PM2.5 mass, respectively. The contribution of secondary aerosol formation increased remarkably with the deterioration of air quality, especially in the heating season.

Circular RNAs (circRNAs) have been identified to exert vital biological functions and can be used as new biomarkers in a number of tumors. However, little is known about the functions of circRNAs in myelodysplastic syndrome (MDS). Here, we aimed to investigate circRNA expression profiles and to investigate the functional and clinical value of circRNAs in MDS. Differential expression of circRNAs between MDS and control subjects was analyzed using circRNA arrays, in which we identified 145 upregulated circRNAs and 224 downregulated circRNAs. Validated by real‐time quantitative PCR between 100 MDS patients and 20 controls, three upregulated (hsa_circRNA_100352, hsa_circRNA_104056, and hsa_circRNA_104634) and three downregulated (hsa_circRNA_103846, hsa_circRNA_102817, and hsa_circRNA_102526) circRNAs matched the arrays. The receiver operating characteristic curve analysis of these circRNAs showed that the area under the curve was 0.7266, 0.8676, 0.7349, 0.7091, 0.8806, and 0.7472, respectively. Kaplan‐Meier survival analysis showed that only hsa_circRNA_100352, hsa_circRNA_104056, and hsa_circRNA_102817 were significantly associated with overall survival. Furthermore, we generated a competing endogenous RNA network focused on hsa_circRNA_100352, hsa_circRNA_104056, and hsa_circRNA_102817. Analyses using Gene Ontology and Kyoto Encyclopedia of Genes and Genomes showed that the three circRNAs were linked with some important cancer‐related functions and pathways., We detected the differences in expression levels of circular RNAs (circRNAs) in bone marrow (BM) between patients with myelodysplastic syndrome (MDS) and controls. Receiver operating characteristic and Kaplan‐Meier survival analyses based on quantitative PCR suggest that hsa_circRNA_100352, hsa_circRNA_104056, and hsa_circRNA_102817 in BM are valuable for diagnosis and prognosis of MDS. The circRNA‐microRNA‐mRNA network prediction and bioinformatics analysis provided a comprehensive understanding of these three circRNAs, which might play important roles in the incidence and development of MDS.

Long non-coding RNAs (lncRNAs) play important roles in hematological malignancies. We have previously identified several differentially expressed lncRNAs in myelodysplastic syndromes (MDS) by microarray analysis. In the present study, we explored the regulatory circuitry, potential functions, clinical and prognostic relevance of these lncRNAs in MDS by developing a lncRNA regulation network. We identified a novel lncRNA, LOC101928834, which was significantly up-regulated in the bone marrow of patients with MDS and acute myeloid leukemia (AML). We further evaluated the clinical relevance of LOC101928834 in 89 MDS and 110 AML patients and found that higher level of LOC101928834 expression was associated with higher white blood cell count, higher blast percentage, the subtype of refractory cytopenia with excess blasts (RAEB) and shorter overall survival in MDS patients. Receiver operating characteristic (ROC) curve analysis showed that LOC101928834 expression could discriminate MDS-RAEB patients from control with an area under the receiver-operating curve (AUC) of 0.9048. Moreover, functional analysis showed that LOC101928834 promoted cell proliferation and cell cycle progression, and activated Wnt/β-catenin signaling pathway in vitro. In conclusion, LOC101928834 expression is correlated with clinical and biological features of MDS and may serve as a novel diagnostic and prognostic biomarker.

This study is aimed at determining the ability of computed tomography- (CT-) based radiomic analysis to distinguish between grade 0/1 and grade 2/3 macrovesicular steatosis (MaS) in cadaveric donor liver transplantation cases. Preoperative noncontrast-enhanced CT images of 150 patients with biopsy-confirmed MaS were analyzed retrospectively; these patients were classified into the low-grade MaS ( n = 100 , grade 0 or 1) and high-grade MaS ( n = 50 , grade 2 or 3) groups. Three-dimensional spherical regions of interest of 40 pixel (2.5 cm) in diameter were placed in the right anterior and left lateral segments of the liver. Thereafter, 300 regions of interest (ROIs) were segmented and randomly assigned to the training and testing groups at a ratio of 7 : 3. A total of 402 radiomic features were extracted from each ROI. For MaS classification, a radiomic model was established using multivariate logistic regression analysis. Clinical data, including age, sex, and liver function, were collected to establish the clinical model at the patient level. The performances of the radiomic and clinical models, i.e., the diagnostic discrimination, calibration, and clinical utilities, were evaluated. The radiomic model, with seven selected features, depicted a good discrimination with an area under the receiver operating characteristic curve (AUC) of 0.907 (95% confidence interval (CI): 0.869–0.940) in the training cohort and 0.906 (95% CI: 0.843–0.959) in the testing cohort. The calibration curve revealed good agreement between the predicted and observed probabilities in the training and testing cohorts (both P > 0.05 in the H-L test). Decision curve analysis revealed that the radiomic model was more beneficial than the treat-all or treat-none schemes for predicting the MaS grade. Alanine transaminase and gamma-glutamyl transferase were used for building the clinical model, and the AUC was 0.784 in the total cohort. The CT-based radiomic model outperforming the conventional clinical model could provide an important reference for MaS grading in cadaveric liver donors.

The nucleoside analogs decitabine (5-AZA-dC) and azacitidine (5-AZA) have been developed as targeted therapies to reverse DNA methylation in different cancer types, and they significantly improve the survival of patients who are not suitable for traditional intensive chemotherapies or other treatment regimens. However, approximately 50% of patients have a response to hypomethylating agents (HMAs), and many patients have no response originally or in the process of treatment. Even though new combination regimens have been tested to overcome the resistance to 5-AZA-dC or 5-AZA, only a small proportion of patients benefited from these strategies, and the outcome was very poor. However, the mechanisms of the resistance remain unknown. Some studies only partially described management after failure and the mechanisms of resistance. Herein, we will review the clinical and molecular signatures of the HMA response, alternative treatment after failure, and the causes of resistance in hematological malignancies.

During CO2 displacement of CH4 in shale, competitive adsorption results in reduced pore space used for gas flow in shale, which is closely associated with the production capacity of shale-gas reservoirs. Thus, the present work investigates the effects of CO2–CH4 competitive adsorption on production capacity. Herein, a slit–pore model is developed in terms of gas storage (CO2 and CH4) and graphene pores using molecular dynamics and implemented via large-scale atomic/molecular massively parallel simulator. The effects of CO2 injection pressure, temperature, and velocity and of pore size on CO2–CH4 displacement and competitive adsorption properties are simulated and examined. Hence, the displacement efficiency of CH4 and the adsorption layer thickness of the CO2–CH4 binary mixture are determined. Moreover, based on a basic seepage model of planar linear flooding, the effect of CO2–CH4 competitive adsorption on production capacity is analytically investigated. Results demonstrate that the production capacity with consideration of adsorption layer thickness is less than that without consideration of adsorption layer thickness, illustrating that CO2–CH4 competitive adsorption behaviors are closely connected with permeability, flow rate, and production capacity of shale-gas reservoirs, especially for shale-gas reservoirs containing large numbers of pores and slits.

To develop effective mitigation policies, a comprehensive understanding of the evolution of the chemical composition, formation mechanisms, and the contribution of sources at different pollution levels is required. PM

Timber genus identification based on the anatomical features of wood is well established in botany. However, species-level wood identification is not always possible based on traditional wood morphology techniques alone. To compensate for the deficiencies of traditional methods, direct analysis in real time coupled to Fourier transform ion cyclotron resonance mass spectrometry (DART-FTICR-MS) was used to obtain the mass spectral fingerprints of different timber species. Using heartwood samples of two morphologically similar species, Pterocarpus santalinus and Pterocarpus tinctorius, subjected to different treatments, i.e. solvent extractions and powdered samples as well as air-dried samples and samples dried at low and high temperatures, we observed distinct chemical signatures for the wood samples from the two species, enabling rapid species-level identification when multivariate statistical analysis was adopted. The supervised orthogonal partial least squares discriminant analysis (OPLS-DA) models for samples subjected to different treatments all exhibited accurate differentiation performance of the explained fraction of variance of classes (R2Y = 0.936–0.987) and the cross-validated fraction of variance of classes (Q2 = 0.857–0.949). Compared with solvent types and the physical form of the sample, the drying treatment method had a greater impact on the chemical fingerprint from DART-FTICR-MS. Air-dried wood chips were the optimal samples for the DART-FTICR-MS method coupled with statistical analysis.

The characterization of the pore structure and shale gas content provides useful information for shale gas reservoir assessment and evaluation and guides the exploration and development of shale ga...

The oil palm tree is a monocotyledon, and the chemical composition varies relative to the part of its trunk. Therefore, the purpose of this study was to investigate the relationship between the chemical composition in different parts of an oil palm trunk and the rate of liquefaction. PEG#400/glycerol (4:1, w/w) was the liquefying reagent with 2% sulfuric acid as a catalyst. Liquefaction was done at the optimum conditions of liquor ratio, temperature (130 to 180 °C), and reaction time (30 to 120 min). The results revealed that the rate of liquefying was dependent on the part of the trunk. The inner zone in the top parts of the trunk had the least amount of lignin and lowest crystallinity. Thus, these parts could be liquefied faster than the other parts of the trunk. According to FTIR, XRD, and 13C NMR analyses, the amorphous polymer content (comprised of lignin, hemicellulose, and disordered zones of cellulose and starch) mostly degraded at the low temperature of 140 °C for 30 min, while the crystalline regions required higher temperature (180 °C). Increasing the temperature had stronger effects than extending reaction time or the liquor ratio. Furthermore, excess in these reaction parameters caused re-condensation of the degraded liquefied products.

Phenolation can effectively improve the reactivity of lignin by directly increasing the phenolic hydroxyl groups and reactive sites for adhesive applications. Wheat straw residue isolated from an autohydrolysis/refining/enzymatic hydrolysis process was phenolated to improve the reactivity of lignin. The optimum phenolation conditions were determined to be a lignin/phenol (L/P) ratio of 1/3 with a 10% acid charge at 120 °C for 2 hours. Phenolated lignin resulted in 32 wt% of phenol incorporated onto lignin and a significant decrease in molecular weight. A comprehensive characterization indicated that all lignin substructures (β-O-4′, β-5′/α-O-4′, β-β′, ferulate, p-coumarate and p-benzoate) were reacted along with a hydrolysis of over 50% of polysaccharides during phenolation, resulting in a decrease in aliphatic hydroxyl groups and an increase in the phenolic hydroxyl groups. Phenol was incorporated onto both the sidechains and aromatic nuclei. These improvements in lignin reactivity will enable it to be used in adhesives with higher substitution rates.

In our previous study, the 4-aminobutyrate aminotransferase (ABAT) gene was screened and selected as a target gene that may affect the prognosis of myelo-dysplastic syndrome (MDS). The present study aimed to determine the prognostic value of ABAT in 152 patients with MDS, 29 patients with acute myeloid leukemia (AML) and 40 controls, by detecting the expression and methylation levels of the ABAT gene. In patients with MDS, the expression levels of ABAT were significantly reduced compared with in the controls (P

To develop more valuable application, oil palm trunk was successfully converted into activated carbon fibers (ACFs). An effective process of chemical treatment with dilute sulfuric acid was conducted to improve the thermal stability of primary fibers for further heating treatment. Carbon dioxide (CO2) was used as activator to produce much porous structure with various pore diameter. The specific surface area (SBET) and total pore volume (Vtotal) of resultant ACFs showed increasing trend as rise of activation temperature and time. The ACFs obtained under the temperature of 900 &deg, C and time of 90 min exhibited highest SBET and Vtotal, which were more than 1800 m2/g and 0.7 mL/g, respectively. Meanwhile, more graphic carbon on the surface of ACFs were destroyed with prolonging activation time, resulting in the oxygen-containing functional groups formed during activation process with CO2. Due to the abundant pores and surface functional groups, the ACFs exhibited excellent adsorption capacity of chromium and would be an alternative material for industrial adsorption utilization.

Hematopoietic stem cells (HSCs) require highly regulated rates of protein synthesis, but it is unclear if they or lineage-committed progenitors preferentially recruit transcripts to translating ribosomes. We utilized polysome profiling, RNA sequencing, and whole-proteomic approaches to examine the translatome in LSK (Lin-Sca-1+c-Kit+) and myeloid progenitor (MP; Lin-Sca-1-c-Kit+) cells. Our studies show that LSKs exhibit low global translation but high translational efficiencies (TEs) of mRNAs required for HSC maintenance. In contrast, MPs activate translation in an mTOR-independent manner due, at least in part, to proteasomal degradation of mTOR by the E3 ubiquitin ligase c-Cbl. In the near absence of mTOR, CDK1 activates eIF4E-dependent translation in MPs through phosphorylation of 4E-BP1. Aberrant activation of mTOR expression and signaling in c-Cbl-deficient MPs results in increased mature myeloid lineage output. Overall, our data demonstrate that hematopoietic stem and progenitor cells (HSPCs) undergo translational reprogramming mediated by previously uncharacterized mechanisms of translational regulation.

Soda lignin-based activated carbons (AC) were successfully prepared through chemical curing with hexamethylenetetramine (HMTA), followed by carbonization and steam activation. The pore structure, surface chemical structure, and adsorption properties of the ACs were investigated. The obtained ACs exhibited a high specific surface area (SBET) and total pore volume (Vtotal), which first increased and then decreased with an increasing HMTA concentration. The highest values were approximately 1800 m2/g and 1.0 mL/g, respectively. The SBET and Vtotal were comparable or superior to those of ACs prepared with various activation methods reported in the literature. By increasing the HMTA concentration, the amount of graphitic carbon, which was the main compound on the surface of the ACs, decreased and then slightly increased, while the functional groups containing C-O showed the opposite tendency. Additionally, the great adsorption capacities of the ACs for methylene blue and iodine were mainly related to the carbonyl group chemical structure and pore structure.

Acute megakaryocytic leukemia (AMKL) is a rare subtype of acute myeloid leukemia (AML), which is challenging to diagnose due to frequent myelofibrosis (MF) and a low percentage of blast cells. In the present study, clinical characteristics and experimental observations in 9 adult patients diagnosed with AMKL, who were recruited by the Sino-U.S. Shanghai Leukemia Co-operative Group, were analyzed in order to summarize the diagnostic experience and provide recommendations on diagnosing AMKL. All the patients were diagnosed according to the 2008 World Health Organization diagnostic criteria. The mean age of the patients with AMKL was 59 years (range, 53–68 years). A total of 8 patients had different degrees of anemia, and 2 patients had 20%, as demonstrated by flow cytometry. A total of 6 patients were positive for platelet-specific antigens, as indicated by immunocytochemistry. Furthermore, 7 patients presented with moderate or marked MF, as demonstrated by a bone marrow biopsy. Karyotypic analysis indicated that 6 patients had abnormal karyotypes. Only 1 patient exhibited the Janus kinase 2V617F mutation. Treatment efficiency was notably poor, with a median survival time of 6.0 months (range, 1.1–24.0 months). In conclusion, the diagnosis of AMKL requires a combination of the results of bone marrow smears and bone marrow biopsy, immunophenotype or immunohistochemistry. We recommend that routine immunophenotypic analysis should include the CD41 and CD61 markers for diagnosing acute leukemia when bone marrow morphology does not indicate the diagnosis.

A novel way to prepare mesoporous activated carbon fibers (ACFs-P) has been developed, while the ACFs-P with high surface area were obtained from liquefied wood by combining polyvinyl butyral (PVB) blending and steam activation. The porosity properties of the new material was investigated by N2adsorption and the Brunauer–Emmett–Teller (BET) surface area was found to be 2710 m2g−1and a pore volume of 1.540 cm3g−1, of which 58.2% was mesoporous with diameters between 3 and 6 nm. ACFs-P had a higher methylene blue (MB) adsorption capacity (962 mg/g) than the PVB-added carbon fibers (CFs-P) and ACFs-P without PVB (ACFs-C). Flexible all-carbon yarn supercapacitors can be produced from ACFs-P as powder or fiber. The fiber approach led to yarn supercapacitors with a less favorable electrochemical performance than the powder based production owing to the poor strength of the fibers. A 10 cm long yarn supercapacitor from the powdered ACFs exhibited a high specific length capacitance of 43 mF cm−1at 2 mV s−1. Yarn supercapacitors showed an excellent mechanical flexibility and its capacitor properties were not diminished after bending or crumpling.

The high-precision calculation method suitable for the viscosity of supercritical CO2 is reported. The modified LBC model, modified DS model and Ehsan empirical formula are selected to calculate viscosity. The error analysis result shows that the average absolute error of the modified DS model is the lowest, which can be applied to the engineering calculation. The LBC model is suitable at 7.5–25MPa and the Ehsan empirical formula has high accuracy at 25–60MPa. Then the viscosity plate is drawn at temperature range of 310–800K and pressure range of 7.5–60MPa, which can be applied in carbon dioxide resources recovery and utilization of technology.

The accumulation of tailings from gold mining and smelting may result in PTE pollution. We investigated PTE contamination from a large amalgamated gold mine tailings pond in Pinggu County, Beijing. In November 2017, 30 soil samples were collected around the tailings pond. The concentrations and pollution degree of PTEs in the samples and the sources of Sb, As, Cd, Cu, Pb, Zn and Hg were analyzed. The average concentration of these elements in soil samples near the tailings pond (16.24, 28.29, 0.99, 171.04, 263.25, 99.73, 0.72 mg/kg, respectively) were higher than their corresponding standard values and background values of the study area. The geoaccumulation index showed that the pollution degree of As, Pb and Hg was moderate, while Sb and Cu present non-pollution to moderate pollution. The average EF values of the elements were Sb (38.31), As (4.23), Cd (0.71), Cu (3.68), Pb (21.24), Zn (0.82) and Hg (5.29), respectively. The environmental risk assessment developed throughout the PERI method indicated that Sb, As, Hg and Pb were the main pollutants in the study area. The three quantitative risk indicators (RI, Igeo and EF) were positively correlated, and all of them indicated that PTEs had significant pollution to the local area. Thus, Sb, As, Pb, Cu, and Hg pollution should be highly concerning. Multivariate statistical analysis shows that the pollution of PTEs was mainly caused by the accumulation of tailings ponds after gold mining and smelting. The research result is of great significance for the prevention and control of soil pollution of PTEs near the tailings pond.

Shanxi Province in the north west of China is one of the centres of ancient Chinese civilization. Archaeological records from this region are a valuable legacy of ancient culture in China. Many historical buildings have been preserved up to the present time. Forty-one archaeological wood samples were taken from twelve timber structures that are in the northern, central, southern and south-eastern regions of Shanxi Province, China. The AMS 14C dates were calibrated and compared to the dates in the historical records to establish accurate calendar dating of the timbers using radiocarbon analyses, when it came to the construction of the buildings and the times when maintenance work was carried out on them. The reusing of certain timbers was investigated. All the samples were identified using a microscope; they were identified as eleven timber-tree genera. The most common species used for the ancient buildings concerned was Ulmus, followed by Larix, Populus and Quercus. While guaranteeing quality and utility, these taxa were mostly used in the columns, flower arms, cap blocks, bracket sets etc. The principle and trend of the wood selection involved were pointedly restricted by means of transportation, because the ancient timbers used in the buildings were mostly gathered from the local wild wood resources in the areas nearby.

// Nianyi Li 1 , Qinfen Chen 1 , Jingwen Gu 1 , Shuang Li 1 , Guangjie Zhao 1 , Wei Wang 1 , Zhicheng Wang 1 and Xiaoqin Wang 1 1 Department of Haematology, Huashan Hospital, Fudan University, Shanghai, China Correspondence to: Xiaoqin Wang, email: wangxiaoqin@shmu.edu.cn Qinfen Chen, email: chenqinfen@126.com Keywords: synergistic effect, deferasirox, decitabine, iron chelation therapy, demethylation Received: June 19, 2016 Accepted: March 14, 2017 Published: March 27, 2017 ABSTRACT A multi-center study from the French Myelodysplastic Syndrome (MDS) Group confirmed that iron chelation therapy is an independent prognostic factor that can increase the survival rate of patients who are suffering from transfusion-dependent low-risk MDS. In this study, we aimed to explore this clinical phenomena in vitro , by exploring the synergistic effect of the iron chelator Deferasirox (DFX) and the DNA methyl transferase inhibitor Decitabine (DAC) in the leukemia cell lines SKM-1, THP-1, and K-562. Treatment with both DFX or DAC promoted apoptosis, induced cell cycle arrest, and inhibited proliferation in all three of these cell lines. The combination of DFX and DAC was much greater than the effect of using either drug alone. DFX showed a synergistic effect with DAC on cell apoptosis in all three cell lines and on cell cycle arrest at the G0/G1 phase in K-562 cells. DFX decreased the ROS levels to varying degrees. In contrast, DAC increased ROS levels and an increase in ROS was also noted when the two drugs were used in combination. Treatment of cells with DAC induced re-expression of ABAT, APAF-1, FADD, HJV, and SMPD3, presumably through demethylation. However the combination of DAC and DFX just had strong synergistic effect on the re-expression of HJV.

The changes of porosity, chemical composition and cellulose crystalline structure of Spruce (Picea abies Karst.) wood cell walls due to compression combined with steam treatment (CS-treatment) were investigated by nitrogen adsorption, confocal Raman microscopy (CRM) and X-ray diffraction (XRD), respectively. A number of slit-shaped mesopores with a diameter of 3.7 nm was formed for the CS-treated wood, and more mesopores were found in the steam-treated wood. CRM results revealed cellulose structure was affected by treatment and β-aryl-ether links associated to guaiacyl units of lignin was depolymerized followed by re-condensation reactions. The crystallinity index (CrI) and crystallite thickness (D200) of cellulose for CS-treated wood were largely increased due to crystallization in the semicrystalline region. Higher degree of increase in both CrI and D200 was observed in both the earlywood and latewood of steam-treated wood, ascribing to the greater amount of mesopores in steam-treated wood than CS-treated wood.

IncRNAs play an important role in the regulation of gene expression. The present study profiled differentially expressed lncRNAs (DELs) and mRNAs (DEMs) in myelodysplastic syndrome (MDS) to construct a 4‑aminobutyrate aminotransferase (ABAT)‑DEL‑DEM co‑expression network in MDS development using the Agilent human BeadChips and Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway and network analyses. Compared with controls, there were 543 DELs and 2,705 DEMs in MDS patients, among which 285 (52.5%) DELs were downregulated and 258 (47.5%) DELs were upregulated, whereas 1,521 (56.2%) DEMs were downregulated and 1,184 (43.70%) DEMs were upregulated in MDS patients. The ABAT‑DEL‑DEM co‑expression network contained six DELs that were co‑expressed with ABAT in MDS. The GO analysis revealed that the co‑expression network mainly participated in response to organic cyclic compound, cell proliferation, cell part morphogenesis, regulation of cell proliferation and enzyme‑linked receptor protein signaling pathways, while the KEGG database showed that the co‑expression network was involved in various pathways, such as phagosome and metabolic pathways. Furthermore, the expression of a selected DEL (lncENST00000444102) and ABAT was shown to be significantly downregulated in MDS patients, and in SKM‑1 and THP‑1 cells. The selected lncENST00000444102 was then overexpressed and ABAT expression was knocked down in the MDS cell lines using lentiviral transfection. In addition, lncENST00000444102 overexpression reduced the viability and increased the apoptosis of MDS cells, ABAT expression was upregulated by lncENST00000444102.

Pterocarpus santalinus and Pterocarpus tincorius are commonly used traded timber species of the genus Pterocarpus. P. santalinus has been listed in Appendix II of the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). As a non-CITES species, P. tincorius is also indiscriminately labeled as P. santalinus due to the similar macroscopic and microscopic features with P. santalinus. In order to understand the molecular discrimination between these easily confused species, xylarium heartwoods of these two species were extracted by three different kinds of solvents and analyzed using gas chromatography&ndash, mass spectrometry (GC-MS). Multivariate analyses were also applied for the selection of marker compounds that are distinctive between P. santalinus and P. tincorius. A total of twenty volatile compounds were detected and tentatively identified in three kinds of extracts, and these compounds included alcohols, stilbenoids, esters, aromatic hydrocarbons, ketones, miscellaneous, phenols, and flavonoids. GC-MS analyses also revealed that extraction solvents including ethanol and water (EW), ethyl acetate (EA), and benzene&ndash, ethanol (BE) gave the best chemotaxonomical discrimination in the chemical components and relative contents of the two Pterocarpus species. After chemometric analyses, EW displayed higher predictive accuracy (100%) than those of EA extract (83.33%) and BE extract (83.33%). Furthermore, spathulenol (17.58 min) and pterostilbene (23.65 min) were elucidated as the critical compounds for the separation of the EW extracts of P. santalinus and P. tinctorius. Thus, a protocol of GC-MS and multivariate analyses was developed to use for successfully distinguishing P. santalinus from P. tinctorius.

This study was to detect expression levels of circular RNA (circRNA) in bone marrow (BM) and peripheral blood (PB) of patients with refractory cytopenia with multilineage dysplasia (RCMD). The objective was to identify circRNAs with potential diagnostic value and investigate the correlation between these circRNAs in BM and PB of RCMD patients.We first analyzed circRNAs in the BM of 5 RCMD patients and 4 control subjects using circRNA arrays. We found 369 circRNAs were differentially expressed between these two groups; 145 were upregulated and 224 were down regulated. Using a set of stringent criteria, we selected 10 circRNAs as potential biomarkers and verified their expression levels in 115 RCMD patients and 20 control subjects. 6 circRNAs were increased in RCMD patients while 3 were decreased and 1 showed no difference. ROC analysis using the same cohort confirmed 8 of these 9 circRNAs could be potential diagnostic biomarkers. We then tested the expression levels of these 10 circRNAs in PB samples from same 115 RCMD patients. There was no correlation between expression levels of these 10 circRNAs in BM and PB samples. This suggested that 10 circRNAs identified in BM samples could not be insteaded by circRNAs in PB samples. Funding: This work was supported in part by grants from the National Natural Science Foundation of China (#81500099) and Shanghai Municipal Science and Technology Commission (#16ZR1404400). Declaration of Interest: The authors declare no conflict of interest. Ethical Approval: The study was approved by the institutional review board at Huashan Hospital of Fudan University and informed consents were obtained from each study participant.

In this study, ZnCl2 activation of phenol liquefied wood fibers at different temperatures was conducted to investigate the reaction mechanisms during the activation process. By combining Fourier transform infrared (FTIR) spectroscopy, thermogravimetric-FTIR-mass spectrometry (TG-FTIR-MS) and elemental analysis, the reaction mechanisms during the ZnCl2 activation were deduced. Below 327 °C, dehydration of the hydroxyl groups and fracturing of molecular chains occurred inside the fiber. At 327–700 °C was the main stage of activation, where molecular structure was rearranged due to intramolecular condensation, crosslinking reactions and scission of molecular chains. A carbon net-like structure was preliminarily formed at 402 °C. Due to the removal of pyrolysis products such as H2, H2O, CO, CO2, benzene and phenol, surface defects were filled in molten ZnCl2. Pores would be left on the fiber surface after activation, cooling and cleaning. Above 700 °C, the aromatization degree and the degree of aromatic ring gradually improved.