Search

Recent advancements in cultural heritage preservation have increasingly focused on the development and application of new composites, harnessing the diverse properties of their components. This study reviews the current state of research and practical applications of these innovative materials, emphasizing the use of inorganic phosphatic materials (in particular the hydroxyapatite) and various polymers. The compatibility of phosphatic materials with calcareous stones and the protective properties of polymers present a synergistic approach to addressing common deterioration mechanisms, such as salt crystallization, biological colonization, and mechanical weathering. By examining recent case studies and experimental results, this paper highlights the effectiveness, challenges, and future directions for these composites in cultural heritage conservation. The findings underscore the potential of these materials to enhance the durability and aesthetic integrity of heritage stones, promoting sustainable and long-term preservation solutions.

This work aims to evaluate the potential use of natural wastes (in particular, clam shells) to synthesize one of the most well-known and versatile materials from the phosphate mineral group, hydroxyapatite (HAP). The obtained material was characterized in terms of morphology and composition using several analytical methods (scanning electron microscopy-SEM, X-ray diffraction-XRD, X-ray fluorescence-XRF, Fourier transform infrared spectroscopy-FTIR, thermal analysis-TGA, and evaluation of the porosity and specific surface characteristics by the Brunauer-Emmett-Teller-BET method) in order to confirm the successful synthesis of the material and to evaluate the presence of potential secondary phases. The developed material was further doped with iron oxide (HAP-Fe) using a microwave-assisted method, and both materials were evaluated in terms of photocatalytic activity determined by the photodecomposition of methylene blue (MB) which served as a contaminant model. The best results (approx. 33% MB degradation efficiency, after 120 min. of exposure) were obtained for the hydroxyapatite material, superior to the HAP-Fe composite (approx. 27%). The utilization of hydroxyapatite obtained from clam shells underscores the importance of sustainable and eco-friendly practices in materials syntheses. By repurposing waste materials from the seafood industry, we not only reduce environmental impact, but also create a valuable resource with diverse applications, contributing to advancements in both healthcare and environmental protection.

Metal nanoparticle phytosynthesis has become, in recent decades, one of the most promising alternatives for the development of nanomaterials using "green chemistry" methods. The present work describes, for the first time in the literature, the phytosynthesis of silver nanoparticles (AgNPs) using extracts obtained by two methods using the aerial parts of Marrubium vulgare L. The extracts (obtained by classical temperature extraction and microwave-assisted extraction) were characterized in terms of total phenolics content and by HPLC analysis, while the phytosynthesis process was confirmed using X-ray diffraction and transmission electron microscopy, the results suggesting that the classical method led to the obtaining of smaller-dimension AgNPs (average diameter under 15 nm by TEM). In terms of biological properties, the study confirmed that AgNPs as well as the M. vulgare crude extracts reduced the viability of human gingival fibroblasts in a concentration- and time-dependent manner, with microwave-assisted extracts having the more pronounced effects. Additionally, the study unveiled that AgNPs transiently increased nitric oxide levels which then decreased over time, thus offering valuable insights into their potential therapeutic use and safety profile.

Nosocomial infections represent a major threat within healthcare systems worldwide, underscoring the critical need for materials with antimicrobial properties. This study presents the development of polyurethane foam embedded with silver nanoparticles (PUF/AgNPs) using a rapid, eco-friendly, in situ radiochemical synthesis method. The nanocomposites were characterized by UV-vis and FTIR spectroscopy, scanning electron microscopy coupled with energy dispersive X-ray technique (SEM/EDX), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), tensile and compression strengths, antimicrobial activity, and foam toxicity tests. The resulting PUF/AgNPs demonstrated prolonged stability (over 12 months) and good dispersion of AgNPs. Also, the samples presented higher levels of hardness compared to samples without AgNPs (deformation of 1682 µm for V1 vs. 4307 µm for V0, under a 5 N force), tensile and compression strength of 1.80 MPa and 0.34 Mpa, respectively. Importantly, they exhibited potent antimicrobial activity against a broad range of bacteria (including Pseudomonas aeruginosa , Staphylococcus aureus, Escherichia coli , and Enterococcus faecalis ) and a fungal mixture (no fungal growth on the sample surface was observed after 28 days of exposure). Furthermore, these materials were non-toxic to human keratinocytes, which kept their specific morphology after 24 h of incubation, highlighting their potential for safe use in biomedical applications. We envision promising applications for PUF/AgNPs in hospital bed mattresses and antimicrobial mats, offering a practical strategy to reduce nosocomial infections and enhance patient safety within healthcare facilities.

The present work aims to study the possibilities of developing silver nanoparticles using natural extracts of grape pomace wastes originating from the native variety of Fetească Neagră 6 Șt. This study focused on investigating the influence of grape pomace extract obtained by two different extraction methods (classical temperature extraction and microwave-assisted extraction) in the phytosynthesis process of metal nanoparticles. The total phenolic content of the extracts was assessed using the spectrophotometric method with the Folin-Ciocâlteu reagent, while the identification and quantification of specific components were conducted through high-performance liquid chromatography with a diode array detector (HPLC-DAD). The obtained nanoparticles were characterized by UV-Vis absorption spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM), along with assessing their antioxidant and antimicrobial properties against Gram-positive bacteria. The data collected from the experiments indicated that the nanoparticles were formed in a relatively short period of time (96 h) and, for the experimental variant involving the use of a 1:1 ratio ( v / v , grape pomace extract: silver nitrate) for the nanoparticle phytosynthesis, the smallest crystallite sizes (from X-ray diffraction-4.58 nm and 5.14 nm) as well as spherical or semispherical nanoparticles with the lowest average diameters were obtained (19.99-23 nm, from TEM analysis). The phytosynthesis process was shown to enhance the antioxidant properties (determined using the DPPH assay) and the antimicrobial potential (tested against Gram-positive strains) of the nanoparticles, as evidenced by comparing their properties with those of the parent extracts; at the same time, the nanoparticles exhibited a selectivity in action, being active against the Staphylococcus aureus strain while presenting no antimicrobial potential against the Enterococcus faecalis strain.

Hyssop ( Hyssopus officinalis L.) and oregano ( Origanum vulgare L.), traditionally used for their antimicrobial properties, can be considered viable candidates for nanotechnology applications, in particular for the phytosynthesis of metal nanoparticles. The present work aims to evaluate the potential application of hyssop and oregano for the phytosynthesis of silver nanoparticles, as well as to evaluate the biological activities of their extracts and obtained nanoparticles (antioxidant potential, as well as cell viability, inflammation level and cytotoxicity in human fibroblasts HFIB-G cell line studies). In order to obtain natural extracts, two extraction methods were applied (classical temperature extraction and microwave-assisted extraction), with the extraction method having a major influence on their composition, as demonstrated by both the total phenolic compounds (significantly higher for the microwave-assisted extraction; the oregano extracts had consistently higher TPC values, compared with the hyssop extracts) and in terms of individual components identified via HPLC. The obtained nanoparticles ware characterized via X-ray diffraction (XRD) and transmission electron microscopy (TEM), with the lowest dimension nanoparticles being recorded for the nanoparticles obtained using the oregano microwave extract (crystallite size 2.94 nm through XRD, average diameter 10 nm via TEM). The extract composition and particle size also influenced the antioxidant properties (over 60% DPPH inhibition being recorded for the NPs obtained using the oregano microwave extract). Cell viability was not affected at the lowest tested concentrations, which can be correlated with the nitric oxide level. Cell membrane integrity was not affected after exposure to classic temperature hyssop extract-NPs, while the other samples led to a significant LDH increase.

With the technological developments witnessed in recent decades, nanotechnology and nanomaterials have found uses in several common applications and products we encounter daily. On the other hand, polyurethane (PU) foams represent an extremely versatile material, being widely recognized for their extensive application possibilities and possessing a multitude of fundamental attributes that enhance their broad usability across various application fields. By combining the versatility of PU with the antimicrobial properties of nanoparticles, this emerging field holds promise for addressing the urgent need for effective antimicrobial materials in various applications. In this comprehensive review, we explore the synthesis methods, properties and applications of these nanocomposite materials, shedding light on their potential role in safeguarding public health and environmental sustainability. The main focus is on PU foams containing metal and metal oxide nanoparticles, but a brief presentation of the progress documented in the last few years regarding other antimicrobial nanomaterials incorporated into such foams is also given within this review in order to obtain a larger image of the possibilities to develop improved PU foams.

The present work describes, for the first time in the literature, the phytosynthesis of silver nanoparticles using Leonurus cardiaca L. extracts. The influence of the extraction method (classical temperature extraction and microwave extraction), as well as of the extract concentration on the characteristics of the nanoparticles, was studied using analytical methods, such as UV-Vis spectrometry, X-ray diffraction, dynamic light scattering, and transmission electron microscopy. Experimental data suggest that use of lower extract concentration leads to smaller dimensions nanoparticles, the same effect using the extract obtained by microwave-assisted extraction. The smallest recorded crystallite sizes (by X-ray diffraction) were under 3 nm. The antioxidant properties (determined by the DPPH assay) and the antimicrobial potential (determined against Gram-negative and Gram-positive strains) are enhanced by the phytosynthesis process (as demonstrated by the comparison of the nanoparticles' properties with the parent extracts). The present work could also represent an important step in obtaining nanoparticles with enhanced properties and controlled morphologies, but also offers information on the phytosynthesis of metallic nanoparticles using low extract concentrations.

Anthropogenic activities lead to the issue of new classes of pollutants in the environment that are not currently monitored in environmental studies. This category of pollutants (known as emerging contaminants) includes a very wide range of target substances, such as pharmaceuticals, plant protection products, personal care products, dyes, toxins, microplastics and many other industrially important intermediaries. Together with an increasing demand for clean water (both for agricultural necessities and for the increasing population consumption), the need for the removal of emerging pollutants, simultaneously with the current "green chemistry" approach, opens the door for the industrial application of natural polymers in the area of environmental protection. Recent developments in this area are presented in this paper, as well as the application of these particular natural materials for the removal of other contaminants of interest (such as radioisotopes and nanoparticles). The current knowledge regarding the processes' kinetics is briefly presented, as well as the future development perspectives in this area., Competing Interests: The authors declare no conflicts of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript; or in the decision to publish the results.

The continuous degradation of cultural heritage artifacts (due to different factors, including the rising air pollution, climate change or excessive biological activity, among others) requires the continuous development of protection strategies, technologies and materials. In this regard, polyelectrolytes have offered effective ways to fight against degradation but also to conserve the cultural heritage objects. In this review, we highlight the key developments in the creation and use of polyelectrolytes for the preservation, consolidation and cleaning of the cultural heritage artifacts (with particular focus on stone, metal and artifacts of organic nature, such as paper, leather, wood or textile). The state of the art in this area is presented, as well as future development perspectives.

In the last decade, researchers have focused on the recycling of agro-food wastes for the production of value-added products. This eco-friendly trend is also observed in nanotechnology, where recycled raw materials may be processed into valuable nanomaterials with practical applications. Regarding environmental safety, replacing hazardous chemical substances with natural products obtained from plant wastes is an excellent opportunity for the "green synthesis" of nanomaterials. This paper aims to critically discuss plant waste, with particular emphasis on grape waste, methods of recovery of active compounds, and nanomaterials obtained from by-products, along with their versatile applications, including healthcare uses. Moreover, the challenges that may appear in this field, as well as future perspectives, are also included.

Starting from the well-known antimicrobial properties of silver nanoparticles, the goal of this study is to evaluate the influence of two "green" recipes, namely an alcoholic extract of Dryopteris filix-mas (L.) Schott and a dispersion of silver nanoparticles phytosynthesized using the extract on grapevine pathogens. The influence of some grapevine parameters (pith/wood rapport, soluble sugars, starch, total sugars, total water content, length of young shoots, number of grapes) in field experiments was also studied. The study was conducted on four clones (Feteasca alba 97 St., Feteasca neagra 6 St., Feteasca regala 72 St., and Cabernet Sauvignon 131 St.) located in vegetation pots inside a greenhouse. For the phytosynthesis of the silver nanoparticles (AgNPs) we used a scaled-up technology, allowing us to obtain large quantities of nanoparticles-containing solution. The AgNPs analysis by X-ray diffraction and transmission electron microscopy confirmed the synthesis of spherical and quasi-spherical nanoparticles of 17 nm average diameter and 6.72 nm crystallite size. The field experiments registered different responses of the four clones to the treatment, using both the natural extracts and phytosynthesized nanoparticles solution. Both recipes exhibited a protective effect against the Uncinula necator pathogen. For the treatment using phytosynthesized nanoparticles, significant increases in the pith/wood ratio for white wine clones (Feteasca alba 97 St. and Feteasca regala 72 St.) were observed. The biochemical analyses revealed other significant increases of soluble sugars (red wine clones-Feteasca neagra and Cabernet Sauvignon/second year), starch (Feteasca alba and Cabernet Sauvignon in 2021 for both clones), total sugars (Feteasca alba and Feteasca neagra in 2021 for both clones), and of total water content (Feteasca alba and Feteasca neagra in 2021 for both clones), respectively. The applied treatments also led to an increase of young shoots length and grape numbers for all clones as compared to the control (chemical pesticide), which would suggest a potential biostimulant effect of the recipes.

With their phytoconstituents acting as reducing and capping agents, natural extracts can be considered a viable alternative for the obtaining of metallic nanoparticles. The properties of phytosynthesized nanoparticles are dependent upon size and morphology, which, in turn, can be tailored by adjusting different parameters of the phytosynthesis process (such as the extracts' composition). In the present study, we aimed to evaluate, for the first time in the literature, the influence of the extraction method and extract concentration on the morphological and biological properties (antioxidant and antibacterial activity) of silver nanoparticles phytosynthesized using Echinacea pupurea L. extracts. The obtained results revealed that the use of the low-concentration Echinacea hydro-alcoholic extract obtained via classical temperature extraction led to the development of nanoparticles with the smallest dimensions (less than 10 nm), compared with the use of extracts obtained with higher concentrations and the extract obtained via the microwave method. The developed nanomaterials exhibited enhanced antioxidant effects (determined via the DPPH assay) and antimicrobial properties (against Escherichia coli and Candida albicans ), compared with the parent extracts.

Stones are ones of the most ancient natural materials exploited by humans, with different uses, from tools to buildings, that have endured over time in better conditions than other objects belonging to cultural heritage. Given the importance of those silent witnesses of our past, as well as our duty to preserve all parts of cultural heritage for future generations, much effort was put into the development of materials for their consolidation, protection, self-cleaning, or restoration. Protection of ancient stone monuments and objects has gained the interest of researchers in the last decades in the field of conservation of cultural heritage. In this respect, the present paper aims to be a critical discussion regarding potential polymeric materials, which can be used in restorative and conservative approaches for stone materials of cultural heritage importance, against physical degradation phenomena. Recent advances in this area are presented, as well as the current bottle-necks and future development perspectives.

Nowadays, special importance is given to quality control and food safety. Food quality currently creates significant problems for the industry and implicitly for consumers and society. The effects materialize in economic losses, alterations of the quality and organoleptic properties of the commercial products, and, last but not least, they constitute risk factors for the consumer's health. In this context, the development of analytical systems for the rapid determination of the sanitary quality of food products by detecting possible pathogenic microorganisms (such as Escherichia coli or Salmonella due to the important digestive disorders that they can cause in many consumers) is of major importance. Using efficient and environmentally friendly detection systems for identification of various pathogens that modify food matrices and turn them into food waste faster will also improve agri-food quality throughout the food chain. This paper reviews the use of metal nanoparticles used to obtain bio nanosensors for the purpose mentioned above. Metallic nanoparticles (Au, Ag, etc.) and their oxides can be synthesized by several methods, such as chemical, physical, physico-chemical, and biological, each bringing advantages and disadvantages in their use for developing nanosensors. In the "green chemistry" approach, a particular importance is given to the metal nanoparticles obtained by phytosynthesis. This method can lead to the development of good quality nanoparticles, at the same time being able to use secondary metabolites from vegetal wastes, as such providing a circular economy character. Considering these aspects, the use of phytosynthesized nanoparticles in other biosensing applications is also presented as a glimpse of their potential, which should be further explored.

This paper aimed to develop two types of support materials with a mesoporous structure of mobile crystalline matter (known in the literature as MCM, namely MCM-41 and MCM-48) and to load them with gallic acid. Soft templating methodology was chosen for the preparation of the mesoporous structures-the cylindrical micelles with certain structural characteristics being formed due to the hydrophilic and hydrophobic intermolecular forces which occur between the molecules of the surfactants (cetyltrimethylammonium bromide-CTAB) when a minimal micellar ionic concentration is reached. These mesoporous supports were loaded with gallic acid using three different types of MCM-gallic acid ratios (1:0.41; 1:0.82 and 1:1.21)-and their characterizations by FTIR, SEM, XRD, BET and drug release were performed. It is worth mentioning that the loading was carried out using a vacuum-assisted methodology: the mesoporous materials are firstly kept under vacuum at ~0.1 barr for 30 min followed by the addition of the polyphenol solutions. The concentration of the solutions was adapted such that the final volume covered the wet mesoporous support and-in this case-upon reaching normal atmospheric pressure, the solution was pushed inside the pores, and thus the polyphenols were mainly loaded inside the pores. Based on the S BET data, it can be seen that the specific surface area decreased considerably with the increasing ratio of gallic acid; the specific surface area decreased 3.07 and 4.25 times for MCM-41 and MCM-48, respectively. The sample with the highest polyphenol content was further evaluated from a biological point of view, alone or in association with amoxicillin administration. As expected, the MCM-41 and MCM-48 were not protective against infections-but, due to the loading of the gallic acid, a potentiated inhibition was recorded for the tested gram-negative bacterial strains. Moreover, it is important to mention that these systems can be efficient solutions for the recovery of the gut microbiota after exposure to antibiotics, for instance.

The toxic action of the Actara 25 WG insecticide (it contains 25% thiamethoxam as an active substance) in non-lethal doses was studied in two species of aquatic organisms-the Prussian carp ( Carassius gibelio ) and the marsh frog ( Pelophylax ridibundus )-at two thermal levels, 6-8 °C (low temperature) and 18-20 °C (room temperature), respectively. In the Prussian carp, we recorded decreases in oxygen consumption and stimulation of the respiratory rhythm, changes that were more pronounced in the case of intoxicated fish and when the species were kept at room temperature. The histopathology of the lung in the frog illustrated the thickening of the conjunctival septum, an increase in the number of mucous cells, and an increase in the ratio between the diameter of the nucleus and the diameter of the pneumocyte. All of these changes were more pronounced in the animals kept at higher temperature. Our study looks at the extent to which temperature changes can influence the ability of poikilothermic organisms to withstand the presence of toxic substances in the environment as a result of the impact of the use of insecticides in agriculture. The two tested organisms are a common presence for the study area, which was affected in the last decade by climate change.

Wine production is one of the most critical agro-industrial sectors worldwide, generating large amounts of waste with negative environmental impacts, but also with high economic value and several potential applications. From wine shoots to grape pomace or seeds, all of the wastes are rich sources of bioactive compounds with beneficial effects for human health, with these compounds being raw materials for other industries such as the pharmaceutical, cosmetic or food industries. Furthermore, these compounds present health benefits such as being antioxidants, supporting the immune system, anti-tumoral, or preventing cardiovascular and neural diseases. The present work aims to be a critical discussion of the extraction methods used for bioactive compounds from grapevine waste and their beneficial effects on human health.

Analgesics and nonsteroidal anti-inflammatory drugs (NSAIDs) such as paracetamol, diclofenac, and ibuprofen are frequently encountered in surface and ground water, thereby posing a significant risk to aquatic ecosystems. Our study reports the catalytic performances of nanosystems TiO 2 -Me x O y (Me = Ce, Sn) prepared by the sol-gel method and deposited onto glass slides by a dip-coating approach in the removal of paracetamol from aqueous solutions by catalytic ozonation. The effect of catalyst type and operation parameters on oxidation efficiency was assessed. In addition to improving this process, the present work simplifies it by avoiding the difficult step of catalyst separation. It was found that the thin films were capable of removing all pollutants from target compounds to the oxidation products.

Cultural heritage (CH) represents human identity and evidence of the existence and activities that people have left over time. In response to the action of aggressive degrading factors, different materials have been developed and used to protect cultural heritage artifacts. The discovery of optimal materials for this purpose also raises several problems, mainly related to their compatibility with the support material, the most important aspect being that they must preserve their aesthetic characteristics. In this context, the present review paper aims to provide a critical discussion about the possibilities of using different inorganic nanomaterials and recipes for the conservation of cultural heritage objects of organic nature (such as paper, wood, and other support materials). In addition, also are covered different aspect concerning protection mechanisms and application methods as well as future perspectives in this area.

Wastewater treatment remains a critical issue globally, despite various technological advancements and breakthroughs. The study of different materials and technologies gained new valences in the last years, in order to obtain cheap and efficient processes, to obtain a cleaner environment for future generations. In this context, the present review paper presents the new achievements in the materials domain with highlights on apatitic materials used for decontamination of water loaded with heavy metals. The main goal of this review is to present the adsorptive removal of heavy metals using hydroxyapatite-based adsorbents, offering a general overview regarding the recent progress in this particular area. Developing the current review, an attempt has been made to give appropriate recognition to the most recent data regarding the synthesis methods and targeted pollutants, including important information regarding the synthesis methods and precursors, morphological characteristics of the adsorbent materials and effectiveness of processes.

The area of phytosynthesized nanomaterials is rapidly developing, with numerous studies being published yearly. The use of plant extracts is an alternative method to reduce the toxic potential of the nanomaterials and the interest in obtaining phytosynthesized nanoparticles is usually directed towards accessible and common plant species, ferns not being explored to their real potential in this field. The developed nanoparticles could benefit from their superior antimicrobial and antioxidant properties (compared with the nanoparticles obtained by other routes), thus proposing an important alternative against health care-associated and drug-resistant infections, as well as in other types of applications. The present review aims to summarize the explored application of ferns in nanotechnology and related areas, as well as the current bottlenecks and future perspectives, as emerging from the literature data.

The aim of the current paper is the development of phytosynthesized silver nanoparticles mediated by Raphanus sativus L. extracts obtained through two extraction methods (temperature and microwave) and to test their potential application for controlling apple crops pathogens. The phytosynthesized materials were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. All the materials were evaluated in terms of antioxidant and in vitro antimicrobial activity (against bacteria, molds, and yeast: Escherichia coli ATCC 8738, Staphylococcus aureus ATTC 25923, Pseudomonas aeruginosa ATCC 9027, Salmonella typhimurium ATCC 14028, Candida albicans ATCC 10231, Venturia inaequalis , Podosphaera leucotricha , Fusarium oxysporum ATCC 48112, Penicillium hirsutum ATCC 52323, and Aspergillus niger ATCC 15475). Considering the results obtained in the in vitro assays, formulations based on nanoparticles phytosynthesized using Raphanus sativus L. waste extracts (RS1N) were evaluated as potential antifungal agents for horticultural crops protection, against Venturia inaequalis and Podosphaera leucotricha through in vivo assays. For the DPPH assay, the inhibition (%) varied between 37.06% (for RS1N at 0.8 mg/mL concentration) and 83.72% (for RS1N at 7.2 mg/mL concentration) compared to 19.97% (for RS2N at 0.8 mg/mL) and only 28.91% (for RS2N at 7.2 mg/mL). Similar results were obtained for RS3N (85.42% inhibition at 7.2 mg/mL) compared with RS4N (21.76% inhibition at 7.2 mg/mL). Regarding the ABTS assay, the highest scavenger activity values were recorded for samples RS1N (91.43% at 1.6 mg/mL) and RS3N (96.62% at 1.6 mg/mL).

Natural compounds obtained from different medicinal and aromatic plants have gained respect as alternative treatments to synthetic drugs, as well as raw materials for different applications (cosmetic, food and feed industries, environment protection, and many others). Based on a literature survey on dedicated databases, the aim of the present work is to be a critical discussion of aspects regarding classical extraction versus modern extraction techniques; possibilities to scale up (advantages and disadvantages of different extraction methods usually applied and the influence of extraction parameters); and different medicinal and aromatic plants' different applications (medical and industrial applications, as well as the potential use in nanotechnology). As nowadays, research studies are directed toward the development of modern, innovative applications of the medicinal and aromatic plants, aspects regarding future perspectives are also discussed.

The search of valuable natural compounds should be directed towards alternative vegetal resources, and to the re-discovery of underutilized plants. Belonging to the Plantaginaceae family, the hoary plantain ( Plantago media L.) represents one of the lesser studied species from the Plantago genus. The literature study revealed the under-utilization of the hoary plantain, a surprising aspect, considering its widespread. If the composition of Plantago media L. is rather well established, its applications are not nearly studied as for other Plantago species. The goal of the present paper is to summarize the findings regarding the applications of P. media, and, having as starting point the applications of related species, to propose new emerging areas of research, such as the biomedical applications validation through in vivo assays, and the evaluation of its potential towards industrial applications (i.e., development of food or personal care products), pisciculture or zootechny, phytoremediation and other environmental protection applications, or in the nanotechnology area (materials phytosynthesis). The present work constitutes not only a brief presentation of this plant's present and potential applications, but also an invitation to research groups world-wide to explore the available vegetal resources.

The overuse of synthetic pesticide, a consequence of the rush to increase crop production, led to tremendous adverse effects, as they constitute a major pollutant for both soils and water, with a high toxicity towards humans and animals and, at the same time, led to development of pest resistance. In the last period, the researches were directed towards finding new solutions with a lower toxicity, less damaging behaviour towards the environment, and a better specificity of action. In this context, the use of essential oils, a complex and unique mixture of compounds, can be considered for the next-generation pesticides. This review aims to present the main applications of the essential oils as insecticides, herbicides, acaricides, and nematicides, as they emerged from the scientific literature published in the last 5 years (2015 to present). From the identified articles within the time period, only those dealing with essential oils obtained by the authors (not commercially available) were selected to be inserted in the review, characterized using established analytical techniques and employed for the envisaged applications. The review is concluded with a chapter containing the main conclusions of the literature study and the future perspectives, regarding the application of essential oils as next-generation pesticides.

The aim of this study was to investigate the changes caused by the administration of ketoprofen to albino NMRI mice on some hematological, biochemical, and structural parameters. For this purpose, the mice were divided into two lots: a control batch and an experimental batch to which ketoprofen was administered subcutaneously at a dose of 10 mg/kg body weight per day for 7 days. A decrease in erythrocyte number and hemoglobin was observed altogether with the increase in white blood cells. Blood biochemistry indicates increased blood glucose, cholesterol, and triglyceride levels. Enzyme values (AST, ALT, and ALP) show a significant increase. Hepatic pathology reveals the enlargement of sinusoidal capillaries, the presence of leukocyte infiltrates associated with necrosis zones.

The growing demand for more sustainable, alternative processes leading to production of plant-derived preparations imposes the use of plants waste generated mainly by agri-food and pharmaceutical industries. These mostly unexploited but large quantities of plants waste also increase the interest in developing alternative approaches for sustainable production of therapeutic molecules. In order to reduce the amount of plant waste by further processing, different novel extraction techniques can be applied. Fruits and their industrial by-products are rich sources of different classes of compounds with therapeutic properties. The processed fruits waste can be reused and lead to novel pharmaceuticals, food supplements or functional foods. This review intends to briefly summarize recent aspects regarding the production of different active compounds from fruit by-products, and their therapeutic properties. The potential use of fruits by-products in different industries will be also discussed., (Copyright © 2020 Fierascu, Sieniawska, Ortan, Fierascu and Xiao.)

Phytosynthesized nanoparticles represent a continuously increasing field of research, with numerous studies published each year. However, with the emerging interest in this area, the quality of the published works is also continuously increasing, switching from routine antioxidant or antimicrobial studies on trivial microbial lines to antibiotic-resistant strains or antitumoral studies. However, this increasing interest has not been not reflected in the studies regarding the toxicological effects of nanoparticles (NPs); this should be a subject of greatest interest, as the increasing administration of NPs in general (and phytosynthesized NPs in particular) could lead to their accumulation in the environment (soil, water and living organisms). The present review aims to present the most recent findings in the application of phytosynthesized NPs as antimicrobial and antitumoral agents, as well as the results regarding their toxicological potential., Competing Interests: The authors declare no conflict of interest.

The strawberries represent in our days one of the main fresh fruits consumed globally, inevitably leading to large amounts of by-products and wastes. Usually appreciated because of their specific flavor, the strawberries also possess biological properties, including antioxidant, antimicrobial, or anti-inflammatory effects. In spite of the wide spread of the Fragaria genus, few species represent the subject of the last decade scientific research. The main components identified in the Fragaria species are presented, as well as several biological properties, as emerging from the scientific papers published in the last decade., Competing Interests: The authors declare no conflict of interest.

Continuously growing demand for plant derived therapeutic molecules obtained in a sustainable and eco-friendly manner favors biotechnological production and development of innovative extraction techniques to obtain phytoconstituents. What is more, improving and optimization of alternative techniques for the isolation of high value natural compounds are issues having both social and economic importance. In this critical review, the aspects regarding plant biotechnology and green downstream processing, leading to the production and extraction of increased levels of fine chemicals from both plant cell, tissue, and organ culture or fresh plant materials and the remaining by-products, are discussed.

Large amounts of agro-industrial waste are being generated each year, leading to pollution and economic loss. At the same time, these side streams are rich source of active compounds including antioxidants. Recovered compounds can be re-utilized as food additives, functional foods, nutra-/pharmaceuticals, cosmeceuticals, beauty products, and bio-packaging. Advanced extraction techniques are promising tools to recover target compounds such as antioxidants from agro-industrial side streams. Due to the disadvantages of classical extraction techniques (such as large amounts of solvents, increased time of extraction, large amounts of remaining waste after the extraction procedure, etc.), and advanced techniques emerged, in order to obtain more efficient and sustainable processes. In this review paper aspects regarding different modern extraction techniques related to recovery of antioxidant compounds from wastes generated in different industries and their applications are briefly discussed.

Catalysis represents the cornerstone of chemistry, since catalytic processes are ubiquitous in almost all chemical processes developed for obtaining consumer goods. Nanocatalysis represents nowadays an innovative approach to obtain better properties for the catalysts: stable activity, good selectivity, easy to recover, and the possibility to be reused. Over the last few years, for the obtaining of new catalysts, classical methods-based on potential hazardous reagents-have been replaced with new methods emerged by replacing those reagents with plant extracts obtained in different conditions. Due to being diversified in morphology and chemical composition, these materials have different properties and applications, representing a promising area of research. In this context, the present review focuses on the metallic nanocatalysts' importance, different methods of synthesis with emphasis to the natural compounds used as support, characterization techniques, parameters involved in tailoring the composition, size and shape of nanoparticles and applications in catalysis. This review presents some examples of green nanocatalysts, grouped considering their nature (mono- and bi-metallic nanoparticles, metallic oxides, sulfides, chlorides, and other complex catalysts).

Leonurus cardiaca L. (motherwort) is a perennial herb, native to Asia and southeastern Europe, with widespread global occurrence in present days. The plant was historically used as cardiotonic and for treating gynaecological afflictions (such as amenorrhea, dysmenorrhea, menopausal anxiety, or postpartum depression). Although its use in oriental and occidental medicine is relatively well documented, the recent progress registered raises the need for an update of the Medicines Agency assessment report on Leonurus cardiaca L., herba (2010). The current study presents the progress made within the 2010-2018 timeframe regarding the potential applications and scientific evidences supporting the traditional use of motherwort, in the same time suggesting future research opportunities.

Extracts obtained from different plant species proved to be a valuable tool in various biomedical applications. In the same time, the phytosynthesis of noble metal nanoparticles represents an already well-established route for obtaining nanoparticles with biological activity. The present paper studies the antioxidant activity and the cytogenetic effects of the alcoholic extracts from rhizomes of Aconitum toxicum Rchb., before and after the phytosynthesis of gold and silver nanoparticles, on the meristematic root cells of Allium cepa L., and on the general mitotic index and the progression rate through the mitotic phases, respectively, as well as on the genetic material organized in chromosomes. The extracts were characterized in terms of total polyphenolics content (1.49% and, respectively, 2.29%) and aconitine content (by HPLC - 4.891 mg/L and, respectively, 18.211 mg/L), while the phytosynthesis of metallic nanoparticles was monitored by UV-Vis spectrometry, X-ray diffraction, X-ray fluorescence and electron microscopy. Both the extracts and the obtained nanoparticles were evaluated for antioxidant potential (the antioxidant activity ranging between 78% and 84.32%) and cytogenetic effects. The obtained results prove the phytosynthesis of AgNPs and AuNPs with dimensions ranging from 9 nm to 15 nm for AuNPs, respectively from 53 nm to 67 nm for AgNPs. The extracts obtained from rhizomes of A. toxicum Rchb. induced mitotic stress, as well as a series of nuclear and mitotic aberrations. The biosynthesis of AgNPs and AuNPs intensified the antioxidant and mitostimulatory activity of the extracts., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Satureja hortensis L. (summer savory) is an annual herbaceous crop, native to Europe and in our days spread and used all over the world. Although its use as spice and medicinal plant is known since ancient times, peer-reviewed studies presenting the scientific data are scarce. The natural products obtained from summer savory (extracts and essential oil) are dominated by polyphenols and flavonoids, responsible for their antioxidant, antimicrobial, antiparasitic, pesticidal, anti-inflammatory, analgesic, hepatoprotective and anticancer properties, among others. The current study presents the progress made in the last decade regarding the potential applications of summer savory, being the first review study focused on S. hortensis, in the same time suggesting future research opportunities, as they appear from the properties of other Satureja species. The available data presenting the properties of summer savory represents a scientific support for application in industry, for developing "clean label" food products., Competing Interests: The authors declare no conflict of interest.

The objective of the study is to screen for morphological, biochemical and histological changes induced by six widely used pesticides (Reldan 40EC, Actara 25WG, Tilt 250EC, Champion 50WG, Fusilade Forte, Dual Gold 960EC) in the amphibian species Pelophylax ridibundus (Pallas, 1771). Highly degenerative changes were observed in animals cultured at 22-24°C, compared to those cultured at 4-6°C. The hepatosomatic index increased upon exposure to almost all of the pesticides, the erythrocyte number decreased upon exposure to all pesticides except Reldan 40EC, while leucopenia was observed only for Reldan 40EC and Actara 25WG. Hyperglycemia was observed upon administration of pesticides (except Champion 50WG and Fusilade Forte, for which hypoglycemia is registered), while a decrease in cholesterol levels was induced by nearly all pesticides. Triglycerides varied only slightly. The results suggest that chronic pesticides exposure can lead to alteration of various indices, as well as to hepatic lesions in amphibians.

Background: Juniperus communis L. represents a multi-purpose crop used in the pharmaceutical, food, and cosmetic industry. Several studies present the possible medicinal properties of different Juniperus taxa native to specific geographical area. The present study aims to evaluate the genoprotective, antioxidant, antifungal and anti-inflammatory potential of hydroalcoholic extract of wild-growing Juniperus communis L. (Cupressaceae) native to Romanian southern sub-Carpathian hills., Methods: The prepared hydroethanolic extract of Juniperus communis L. was characterized by GC-MS, HPLC, UV-Vis spectrometry and phytochemical assays. The antioxidant potential was evaluated using the DPPH assay, the antifungal effect was studied on Aspergillus niger ATCC 15475 and Penicillium hirsutum ATCC 52323, while the genoprotective effect was evaluated using the Allium cepa assay. The anti-inflammatory effect was evaluated in two inflammation experimental models (dextran and kaolin) by plethysmometry. Male Wistar rats were treated by gavage with distilled water (negative control), the microemulsion (positive control), diclofenac sodium aqueous solution (reference) and microemulsions containing juniper extract (experimental group). The initial paw volume and the paw volumes at 1, 2, 3, 4, 5 and 24 h were measured., Results: Total terpenoids, phenolics and flavonoids were estimated to be 13.44 ± 0.14 mg linalool equivalent, 19.23 ± 1.32 mg gallic acid equivalent, and 5109.6 ± 21.47 mg rutin equivalent per 100 g of extract, respectively. GC-MS characterization of the juniper extract identified 57 volatile compounds in the sample, while the HPLC analysis revealed the presence of the selected compounds (α-pinene, chlorogenic acid, rutin, apigenin, quercitin). The antioxidant potential of the crude extract was found to be 81.63 ± 0.38% (measured by the DPPH method). The results of the antifungal activity assay (for Aspergillus niger and Penicillium hirsutum) were 21.6 mm, respectively 17.2 mm as inhibition zone. Test results demonstrated the genoprotective potential of J. communis undiluted extract, inhibiting the mitodepressive effect of ethanol. The anti-inflammatory action of the juniper extract, administered as microemulsion in acute-dextran model was increased when compared to kaolin subacute inflammation induced model., Conclusion: The hydroalcoholic extract obtained from wild-growing Juniperus communis native to Romanian southern sub-Carpathian hills has genoprotective, antioxidant, antifungal and anti-inflammatory properties.

The present study aims to evaluate the potential uses of hydroalcoholic extracts obtained from Romanian native wild-growing plants. The hydroalcoholic extracts were obtained from the burdock roots and respectively the aerial parts of birdeye speedwell. The extracts were characterised by HPLC (quantifying 13 compounds in the V. persica extract, 6 compounds in the A. lappa extract and confirming the presence of arctiin and arctigenin in the burdock extract). The antioxidant potential of the crude extracts was evaluated using two methods: the DPPH assay (79.91% for speedwell extract, 76.23% for burdock extract) and the phosphomolybdate method (296.5 mg/g ascorbic acid equivalents for burdock, 324.4 mg/g for speedwell). The crude extracts were found to be active against both fungal lines used (Aspergillus niger and Penicillium hirsutum), inhibition zones - 17.1 mm and 13.1 mm against P. hirsutum, respectively ca. 22 mm for both extracts against A. niger. The cytogenetic effects (assessed using the Allium cepa assay) revealed a series of chromosomal aberrations and nuclear aberrations induced in the meristematic root cells. The anti-inflammatory effect, estimated in two inflammation experimental models, showed a significant effect, especially for the speedwell extract. The results recommend the evaluated extracts as promising sources of biologically-active compounds., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The development of methods for obtaining new materials with antimicrobial properties, based on green chemistry principles has been a target of research over the past few years. The present paper describes the phyto-mediated synthesis of metallic nano-architectures (gold and silver) via an ethanolic extract of Melissa officinalis L. (obtained by accelerated solvent extraction). Different analytic methods were applied for the evaluation of the extract composition, as well as for the characterization of the phyto-synthesized materials. The cytogenotoxicity of the synthesized materials was evaluated by Allium cepa assay, while the antimicrobial activity was examined by applying both qualitative and quantitative methods. The results demonstrate the synthesis of silver nanoparticles (average diameter 13 nm) and gold nanoparticles (diameter of ca. 10 nm); the bi-metallic nanoparticles proved to have a core-shell flower-like structure, composed of smaller particles (ca. 8 nm). The Ag nanoparticles were found not active on nuclear DNA damage. The Au nanoparticles appeared nucleoprotective, but were aggressive in generating clastogenic aberrations in A. cepa root meristematic cells. Results of the antimicrobial assays show that silver nanoparticles were active against most of the tested strains, as the lowest MIC value being obtained against B. cereus (approx. 0.0015 mM).

The aim of the study was to investigate the protective role of thiourea on the physiological, hematological, biochemical and histopathological parameters of Leuciscus cephalus exposed to sublethal concentration of Pendigan 330 EC herbicide. The animals were divided in four experimental groups (control, animals subjected to 1 ‰ thiourea, animals subjected to 4 × 10(-4) mL/L herbicide and, respectively, animals subjected to 4 × 10(-4) mL/L herbicide and 1 ‰ thiourea). Exposure of European chub to herbicide administered in water for 2 weeks determined installation of pathological changes in the liver and gills tissues. Also, were observed a decrease in the number of white blood cells and oxygen consumption, breathing frequency, and an increase in the number of red blood cells and glycaemia values. Thiourea counteracts the toxic action, describing itself as normal liver parenchyma and normal gills in animals intoxicated with herbicide, without lesion, and a return to normal values of the studied markers.