Search

Introduction: Diagnostic reference levels (DRLs) are typical dose levels for medical imaging examinations for groups of standard‐sized patients or standard phantoms for broadly defined types of equipment used as a tool to aid optimisation of protection for medical exposures. Currently, there are no paediatric DRLs for conventional radiography (i.e. general X‐rays) published in Australia. The aim of this study was to establish typical radiation doses and risks that are representative of those delivered for commonly performed X‐ray projections for a 5‐year‐old/20 kg child using a 5‐year‐old anthropomorphic 'bone fracture' phantom in three dedicated paediatric radiology departments in Victoria. Methods: A total of 20 projection images were acquired for a standard 5‐year‐old/20 kg phantom using digital radiography X‐ray equipment. The air kerma‐area product (KAP) measured at each centre by a KAP metre, which was calibrated to a national primary standard, was considered to represent the median value for that centre for each X‐ray projection. Organ doses and effective dose were estimated using PCXMC software, and risks of radiation‐induced cancer and radiation‐induced death were calculated based on the BEIR VII report. Results: The typical doses for the individual X‐ray projections ranged from 3 mGy•cm2 to 86 mGy•cm2, whilst the effective doses ranged from 0.00004 to 0.07 mSv. The radiation risks were 'minimal' to 'negligible'. Conclusion: The estimation of typical radiation doses and associated risks for a 5‐year‐old/20 kg phantom study provides reference values for guidance and is a first step in assisting optimisation at other institutions until national DRLs, based on patient data from the clinical setting, are published. [ABSTRACT FROM AUTHOR]

Dental comparison is internationally accepted as one of the primary scientific methods of identification of a deceased person or persons. With advances in modern technology, the use of Post-Mortem Computed tomography to aid forensic medicine and forensic odontology is on the increase. In this study, we explore if odontologists with varying levels of experience in forensic odontology, and more specifically with charting from a Multi-Planar Reformation, can confidently extrapolate data of equivalent value from computer tomographic images as traditional radiographs. Australian odontologists were asked to complete a questionnaire which required dental charting from a variety of radiographic images and explored the practitioner's confidence in the records produced. Experience level was shown to have very little impact upon the confidence of charting from Computed Tomography images alone especially in the presence of metallic restorations. The results of the survey indicate that currently practitioners are not confident in charting from a Multi-Planar Reformation alone and that traditional physical and radiographic examinations are still indicated. [ABSTRACT FROM AUTHOR]

Since the beginning of this century, the use of postmortem computed tomography (PMCT) in forensic autopsies has increased. In this study we examined how similar dental charts created using PMCT as a solitary examination mode were to dental charts created using the conventional method of a clinical inspection including intraoral radiographs. A total of 100 previously performed dental identification cases were retrospectively included in the study. For each case, a dental chart was created solely based upon PMCT. The PMCT based dental chart was subsequently compared with the chart created from the previous conventional identification examination. Based upon the accuracy, sensitivity and specificity values PMCT performed very well compared to the conventional method in the identification concerning presence or absence of teeth, the presence of crowns, bridges and endodontic treatments as well as the presence and types of fillings. PMCT performed poorly concerning the extension of fillings and identification of small, tooth-colored fillings. The use of PMCT is a valuable supplement to the conventional methods available for forensic odontologists and may be of great value for initial screening in mass fatalities. [ABSTRACT FROM AUTHOR]

Purpose: This paper presents a proposed guideline for the use of post-mortem computed tomography (PMCT) during forensic dental identification. Currently, whole-body PMCT is widely used prior to autopsies for the diagnosis of fractures, organ changes, hemorrhages, and for the localization of foreign bodies, but it may also facilitate the odontological identification process in single cases and in cases involving multiple fatalities. Several studies have described the use of PMCT in forensic odontological work, but we have not found any comprehensive set of guidelines on how to perform a forensic odontological examination using PMCT. The aim was to develop guidelines for creating post-mortem dental charts during forensic odontological identification examinations using the standard functions of PMCT. Methods: A proposed guideline was developed from 15 selected cases examined at the Section of Forensic Pathology, Department of Forensic Medicine at the University of Copenhagen in Denmark from October 2011 to May 2012. Using the functionalities and three-dimensional (3D) reconstructions of OsiriX DICOM-viewer software (Pixmeo Sarl, Bernex, Geneva, Switzerland) we adjusted the contrast and brightness settings and developed a proposed guideline for creating PMCT-based dental charts. A four-step guideline was produced. Conclusion: In our casework, we are currently using the guidelines proposed herein. The use of PMCT has allowed us to target our clinical examinations, greatly improving their efficiency. Furthermore, PMCT allows the storage of data for later documentation and research. Further research is needed to validate the proposed guideline. [ABSTRACT FROM AUTHOR]