Search

The nano-metal-treated PET films with anti-virus and anti-fogging ability were developed using sparking nano-metal particles of Ag, Zn, and Ti wires on polyethylene terephthalate (PET) films. Ag nanoparticles were detected on the PET surface, while a continuous aggregate morphology was observed with Zn and Ti sparking. The color of the Ag-PET films changed to brown with increasing repeat sparking times, but not with the Zn-PET and Ti-PET films. The water contact angle of the nano-metal-treated PET films decreased with increasing repeat sparking times. The RT-PCR anti-virus test confirmed the high anti-virus efficiency of the nano-metal-treated PET films due to the fine particle distribution, high polarity, and binding of the nano-metal ions to the coronavirus, which was destroyed by heat after UV irradiation. A highly transparent, anti-fogging, and anti-virus face shield was prepared using the Zn-PET film. Sparking was an effective technique to prepare the alternative anti-virus and anti-fogging films for medical biomaterial applications because of their low cost, convenience, and fast processing.

A blend of cassava starch (CS), carboxymethyl cellulose (CMC), and paraffin was prepared as a coating material to maintain the quality of eggs during 4 wk of storage at different temperatures. The efficacy of the CS/CMC/paraffin (6/1/0.5% w/v) coating was investigated in terms of the Haugh unit (HU), weight loss, pH, and microbial load at the end of storage. The best egg storage temperature was 4°C, which maintained an HU of grade AA in coated and uncoated eggs for 4 wk. Lower weight loss (2.14%) was observed in coated eggs at 4°C storage than at 30°C storage (3.26%). The pH in the albumen of coated and uncoated eggs at 4°C increased from 6.84 to 6.88 and 7.01 to 7.03, respectively, after 4 wk of storage. No microbes were detected in the coated and uncoated eggs at 4°C. The maximum microbial count was 728 ± 35 cfu/mL in uncoated eggs at 30°C storage. Egg coating prevented microbial contamination of eggs stored at 30°C for 4 wk. The freshness of the eggs did not affect the nutrient content. The egg-coating material effectively maintained egg quality, prevented microbial contamination of eggs, and increased the shelf life of eggs at storage temperatures of 25 and 30°C., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

An egg-coating material was developed to extend the shelf-life and freshness of eggs by blending cassava starch (CS) with gelling agents and waxes. The effects of the properties of this egg coating on egg quality were investigated. Hydroxypropyl methylcellulose (HPMC), carboxymethyl cellulose (CMC), beeswax, and paraffin wax were used. CS blended with low-molecular-weight paraffin (Paraffin(L)) and CMC coating material displayed a tensile strength of 4 MPa, 34% elongation at break, 0.0039 g day -1 m -2 water vapor permeability, and a water contact angle of 89° at 3 min. Eggs coated with CS/CMC/Paraffin(L) solutions had a Haugh unit value of 72 (AA grade) and exhibited a weight loss of 2.4% in 4 weeks. CMC improved the compatibility of CS and Paraffin(L). This improvement and the hydrophobicity of Paraffin(L) provided suitable mechanical and water-resistance properties to the coating material that helped to maintain the quality of the coated AA-grade eggs with low weight loss for 4 weeks.

Antimicrobial resistance (AMR) has emerged as a major public health concern, around which the international leadership has come together to form strategic partnerships and action plans. The main driving force behind the emergence of AMR is selection pressure created due to consumption of antibiotics. Consumption of antibiotics in human as well as animal sectors are driven by a complex interplay of determinants, many of which are typical to the local settings. Several sensitive and essential realities are tied with antibiotic consumption - food security, livelihoods, poverty alleviation, healthcare access and national economies, to name a few. That makes one-size-fits-all policies, framed with the developed country context in mind, inappropriate for developing countries. Many countries in the South East Asian Region have some policy structures in place to deal with AMR, but most of them lack detailed implementation plans or monitoring structures. In this current debates piece, the authors argue that the principles driving the AMR agenda in the South East Asian countries need to be dealt with using locally relevant policy structures. Strategies, which have successfully reduced the burden of AMR in the developed countries, should be evaluated in the developing country contexts instead of ad hoc implementation. The Global Action Plan on AMR encourages member states to develop locally relevant National Action Plans on AMR. This policy position should be leveraged to develop and deploy locally relevant strategies, which are based on a situation analysis of the local systems, and are likely to meet the needs of the individual member states.