Search

Your search keyword '"Choi, Duck-Kyun"' showing total 38 results
Start Over Author "Choi, Duck-Kyun" Publication Year Range Last 10 years
38 results on '"Choi, Duck-Kyun"'

36. Highly Bendable and Durable Transparent Electromagnetic Interference Shielding Film Prepared by Wet Sintering of Silver Nanowires

Author

Kim, Dong Gyu, Choi, Jong Han, Choi, Duck-Kyun, and Kim, Sang Woo

Abstract

Electromagnetic (EM) wave emissions from wearable or flexible smart display devices can cause product malfunction and have a detrimental effect on human health. Therefore, EM shielding strategies are becoming increasingly necessary. Consequently, herein, we prepared a transparent acrylic polymer-coated/reduced graphene oxide/silver nanowire (Ag NW) (A/RGO/SANW) EM interference (EMI) shielding film via liquid-to-vapor pressure-assisted wet sintering. The film exhibited enhanced Ag NW network formation and antireflection (AR) effects. The wet-sintered Ag NW shielding film had a threshold radius of curvature (ROC) of 0.31 mm at a film thickness of 100 μm, demonstrating its high flexibility, whereas the conventional indium tin oxide (ITO) shielding film had a threshold ROC of ∼5 mm. The EMI shielding effectiveness (SE) of the A/RGO/SANW multilayer film was approximately twice that of the ITO film at a similar relative transmittance (84–85%). The optical relative reflectance of the Ag NW layer was reduced due to the AR effect, and the visible-light transmittance was considerably improved owing to the different refractive indices in the multilayer shielding film. Because the acrylic coating layer had a high contact angle, the multilayer film exhibited high temperature and humidity durability with little change in the SE over 500 h at 85 °C and 85% relative humidity. The multilayer film comprising wet-sintered Ag NW exhibited high flexibility and humidity durability, high shielding performance (more than 24 dB at a relative transmittance of 85% or more), and high mass productivity, making it highly applicable for use as a transparent shielding material for future flexible devices.

Published
2018
Full Text
View/download PDF

37. Synthesis of one-dimensional SnO2lines by using electrohydrodynamic jet printing for a NO gas sensor

Author

Kim, Chang-Yeoul, Jung, Hyunsung, Choi, Hannah, and Choi, Duck-kyun

Abstract

One-dimensional (1-D) SnO2lines as a representative semiconducting oxide were formed by using electrohydrodynamic (EHD) jet-printing of a tin chloride pentahydrate and polyvinylpyrrolidone (PVP, 1,200k, Aldrich) solution ink. The 1-D polymer lines, including Sn precursors, were created by controlling the viscosity, that is, the polymer/tin precursor ratio, and by adjusting printing conditions such as the tip-to-substrate distance, the applied voltage, the flow rate of ink and its velocity. The printed lines were dried at 200 °C to get rid of solvent and were finally heat-treated at 600 °C to burn out PVP and form a tin oxide line. We found that the linearity and the shape of the aligned 1-D SnO2could be controlled by adjusting various parameters such as the viscosity of the precursor solution, the ratio of Sn to the PVP polymer in the solution, the shape of the cone, the size of a droplet, the applied voltage, the working distance, and the flow rate on glass slides and Si wafers with a SiO2layer. We found that the heat treatment for removal of the polymers should be tailored to produce continuous 1-D SnO2lines due to the drastic volume reduction (> 90%) of the aligned fibers during the annealing process. The electrical and the NO-gas-sensing properties of the 1-D SnO2aligned on Si wafers with Au electrode patterns were evaluated.

Published
2016
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results