Search

We report on DFT-TDDFT studies of the structural, electronic and vibrational properties of B24N24 nanocapsules and the effect of encapsulation of homonuclear diatomic halogens (Cl2, Br2 and I2) and chalcogens (S2 and Se2) on the interaction of the B24N24 nanocapsules with the divalent magnesium cation. In particular, to foretell whether these BN nanostructures could be proper negative electrodes for magnesium-ion batteries, the structural, vibrational and electronic properties, as well as the interaction energy and the cell voltage, which is important for applications, have been computed for each system, highlighting their differences and similarities. The encapsulation of halogen and chalcogen diatomic molecules increases the cell voltage, with an effect enhanced down groups 16 and 17 of the periodic table, leading to better performing anodes and fulfilling a remarkable cell voltage of 3.61 V for the iodine-encapsulated system.

Graphene is an ideal candidate material for spintronics due to its layered structure and peculiar electronic structure. However, in its pristine state, the production of magnetic moments is not trivial. A very appealing approach is the chemical modification of pristine graphene. The main obstacle is the control of the geometrical features and the selectivity of functional groups. The lack of a periodic functionalization pattern of the graphene sheet prevents, therefore, the achievement of long-range magnetic order, thus limiting its use in spintronic devices. In such regards, the stability and the magnitude of the instilled magnetic moment depending on the size and shape of in silico designed graphane islands and ribbons embedded in graphene matrix will be computed and analysed. Our findings thus suggest that a novel and magneto-active graphene derivative nanostructure could become achievable more easily than extended graphone or nanoribbons, with a strong potential for future spintronics applications with a variable spin-current density., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Using first-principles calculations based on density functional theory, we investigated the effects of surface functionalization on the energetic and electronic properties of hydrogenated and chlorinated silicon nanowires oriented along the <112> direction. We show that the band structure is strongly influenced by the diameter of the nanowire, while substantial variations in the formation energy are observed by changing the passivation species. We modeled an octane moiety absorption on the (111) and (110) surface of the silicon nanowire to address the effects on the electronic structure of the chlorinated and hydrogenated systems. We found that the moiety does not substantially affect the electronic properties of the investigated systems. Indeed, the states localized on the molecules are embedded into the valence and conduction bands, with no generation of intragap energy levels and moderated change in the band gap. Therefore, Si-C bonds can enhance protection of the hydrogenated and chlorinated nanowire surfaces against oxidation without substantial modification of the electronic properties. However, we calculated a significant charge transfer from the silicon nanowires to the octane moiety.

With the continued digitization of the energy sector, the problem of sunken scholarly data investments and forgone opportunities of harvesting existing data is exacerbating. It compounds the problem that the reproduction of knowledge is incomplete, impeding the transparency of science-based targets for the choices made in the energy transition. The FAIR data guiding principles are widely acknowledged as a way forward, but their operationalization is yet to be agreed upon within different research domains. We comprehensively test FAIR data practices in the low carbon energy research domain. 80 databases representative for data needed to support the low carbon energy transition are screened. Automated and manual tests are used to document the state-of-the art and provide insights on bottlenecks from the human and machine perspectives. We propose action items for overcoming the problem with FAIR energy data and suggest how to prioritize activities., (© 2022. The Author(s).)

The surface of nanowires is a source of interest mainly for electrical prospects. Thus, different surface chemical treatments were carried out to develop recipes to control the surface effect. In this work, we succeed in shifting and tuning the semiconductivity of a Si nanowire-based device from n- to p-type. This was accomplished by generating a hole transport layer at the surface by using an electrochemical reaction-based nonequilibrium position to enhance the impact of the surface charge transfer. This was completed by applying different annealing pulses at low temperature (below 400 °C) to reserve the hydrogen bonds at the surface. After each annealing pulse, the surface was characterized by XPS, Kelvin probe measurements, and conductivity measured by FET based on a single Si NW. The mechanism and conclusion were supported experimentally and theoretically. To this end, this strategy has been demonstrated as an essential tool which could pave a new road for regulating semiconductivity and for other low-dimensional nanomaterials.

The solubilization mechanism of lipid membranes in the presence of Triton X-100 (TX-100) is investigated at molecular resolution using molecular dynamics (MD) simulations. Thanks to the large time and length scales accessible by the hybrid particle-field formulation of the models employed here, the complex process of membrane solubilization has been studied, with the goal of verifying the three stage model reported in the literature. DPPC lipid bilayers and vesicles have been studied at different concentrations of the TX-100 detergent employing coarse grained (CG) models. Systems up to ∼600.000 beads, corresponding to more than 2 millions heavy atoms, have been simulated. Moreover, in order to clarify several experimental pieces of evidence, both slow and fast detergent partition scenarios have been investigated. Flat and curved (vesicles) lipid bilayer surfaces, interacting with TX-100, have been considered to study the curvature effects on the detergent partition rate in the membrane. Shape and conformational changes of mixed DPPC/TX-100 vesicles, as a function of TX-100 content, have also been studied. In particular, high curvature surfaces, corresponding to a higher local TX-100 content, promote a membrane rupture. In flat lipid surfaces, on the time scale simulated the detergent partition is almost absent, following a different pathway of the solubilization membrane mechanism.

The low-density (LDA) to high-density (HDA) transformation in amorphous Ge at high pressure is studied by first-principles molecular dynamics simulations in the framework of density functional theory. Previous experiments are accurately reproduced, including the presence of a well-defined LDA-HDA transition above 8 GPa. The LDA-HDA density increase is found to be about 14%. Pair and bond-angle distributions are obtained in the 0-16 GPa pressure range and allowed us a detailed analysis of the transition. The local fourfold coordination is transformed in an average HDA sixfold coordination associated with different local geometries as confirmed by coordination number analysis and shape of the bond-angle distributions.

A multiscale scheme is proposed and validated for Triton X-100 (TX-100), which is a detergent widely employed in biology. The hybrid particle field formulation of the model allows simulations of large-scale systems. The coarse-grained (CG) model, accurately validated in a wide range of concentrations, shows a critical micelle concentration, shape transition in isotropic micellar phase, and appearance of hexagonal ordered phase in the experimental ranges reported in the literature. The fine resolution of the proposed CG model allows one to obtain, by a suitable reverse mapping procedure, atomistic models of micellar assemblies and of the hexagonal phase. In particular, atomistic models of the micelles give structures in good agreement with experimental pair distance distribution functions and hydrodynamic measurements. The picture emerging by detailed analysis of simulated systems is quite complex. Polydisperse mixtures of spherical-, oblate-, and prolate-shaped aggregates have been found. The shape and the micelle behavior are mainly dictated by the aggregation number (Nagg). Micelles with low Nagg values (∼40) are spherical, while those with high Nagg values (∼140 or larger) are characterized by prolate ellipsoidal shapes. For intermediate Nagg values (∼70), fluxional micelles alternating between oblate and prolate shapes are found. The proposed model opens the way to investigations of several mechanisms involving TX-100 assembly in protein and membrane biophysics.

The interface of biological molecules with inorganic surfaces has been the subject of several recent studies. Experimentally some amino acids are evidenced to play a critical role in the adhesion and selectivity on oxide surfaces; however, detailed information on how the water molecules on the hydrated surface are able to mediate the adsorption is still missing. Accurate total energy ab initio calculations based on dispersion-corrected density functional theory have been performed to investigate the adsorption of selected amino acids on the hydrated ZnO(101̅0) surface, and the results are presented and discussed in this paper. We have also investigated the role played by water in the determination of the most energetically favorable adsorption configurations of the selected amino acids. We have found that for some amino acids the most energetically favorable configurations involve the deprotonation of the molecule if the water screening is not effective.