Search

Esthetic concerns may appear on implant-supported prostheses after peri-implantitis treatment, such as implantoplasty procedures that includes the thread removal and surface smoothening. A technique for restoring implants that have been treated for peri-implantitis using an implantoplasty procedure combined with the detoxification of the implant surfaces is described. The technique involves the fabrication of an implant-supported prosthesis following the biologically oriented preparation technique (BOPT) and aims to solve esthetic complications after this peri-implantitis treatment approach., (Copyright © 2024 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Purpose: To determine the relationship between bone loss that occurs during the peri-implantitis process and variations in implant stability using resonance frequency analysis (RFA) measurement methods., Materials and Methods: Forty selftapping implants were placed in cow ribs, and study scenarios were established according to the affected implant side and bone loss depth (n = 10 implants per group): Case 1 = bone loss on one side (vestibular); Case 2 = bone loss on two opposite sides (buccal and lingual); Case 3 = bone loss on two adjacent sides (buccal and mesial); and Case 4 = foursided bone loss (circumferential). For each group of 10 implants, first a bone loss of 0 mm was evaluated, then 4-mm defects (simulating 1/3 of bone loss) were created and evaluated, and finally 8-mm defects (simulating 2/3 of bone loss) were created and evaluated. Osteotomy measurements were made with a periodontal probe. For each implant, RFA was measured by the same operator using the Beacon system (Osstell)., Results: The initial implant stability quotient (ISQ) values of the 40 implants exceeded 70, reflecting an average of 73 in the buccolingual (VL) and 74.8 in the mesiodistal (MD) directions. ISQ measurements in the 10 implants in which bone dehiscence was performed on the vestibular aspect reflected a decrease in ISQ values as bone loss increased. When generating bone loss in two opposite sides (buccal and lingual), a greater decrease in ISQ values was observed when 2/3 of the implant were affected. The average VL ISQ measurement was less than 70 when at sites with 2/3 of bone loss., Conclusions: When bone loss occurs on only one side of the implant, the ISQ values decrease, but the implant maintains good stability. The same occurs when two opposite sides of the implant are affected, as the unaffected side has the least decrease in ISQ value.

Intraoral scanner software programs allow the clinician to draw the tooth preparation finish lines. However, this information may be lost when importing the digital file into different computer-aided design (CAD) dental software programs. A technique for transferring the marked tooth preparation finish line into an intraoral digital scan is described. The intraoral digital scan of the tooth preparation is duplicated and used to draw the finish line. Subsequently, the tooth preparation geometry is erased while maintaining the finish line border, which will be used as a reference when designing the definitive restoration in the CAD software program., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

This report describes a prosthetically-driven implant planning method, guided by the alignment procedures between the cone beam computed tomography, intraoral digital scans, and digitized maxillary and mandibular interim complete dentures using intraoral composite resin markers as a common reference. The markers were attached to the keratinized oral mucosa of the edentulous ridges using cyanoacrylate and kept in place during the digitizing procedures. The technique provides a simpler and more economical alternative to conventional prosthetically-driven static implant planning methods., (© 2021 by the American College of Prosthodontists.)

Statement of Problem: Implant-supported prostheses may be subject to esthetic, biological, or mechanical complications. Protocols for dealing with these mechanical problems are sparse., Purpose: The purpose of this in vitro study was to compare the efficacy of a mechanical system for extracting fractured implant-prosthesis screws with the conventional method., Material and Methods: A total of 60 screws were divided into 2 groups according to their morphology (flat screws with a smooth shaft and threaded apical area and screws with a completely threaded body) and subjected to fatiguing and static load testing until fracture. The specimens were assigned to 3 operators with varying levels of clinical experience (high, medium, low) in extracting fractured screws by using the conventional method (explorer and ultrasound device) and a mechanical method (extractor kit). The extraction event (whether the screw fragment was extracted or not within 10 minutes) was recorded, and the time taken to perform the extraction was measured for each method in relation to screw type, operator experience, and damage to the threads. The influence of screw morphology, extraction method, operator experience, and fracture type on the time needed to extract a screw fragment was assessed with the Mann-Whitney and Kruskal-Wallis tests. Thread damage was compared by using the Fisher's exact test and the Kruskal-Wallis test (α=.05)., Results: The mechanical method was more effective for screw extraction than the conventional method (P=.032). Screw morphology also had a significant influence on extraction, whereby the screw design with apical thread took less time to extract (P=.022). Coronal fractures had a higher probability of extraction than apical fractures (P=.05)., Conclusions: Mechanical extraction is more effective for extracting fractured implant-prosthetic screws, showing a higher probability of extraction than the conventional method. Prosthetic fixing screws with a smooth shaft and threaded apical area are the easiest to extract., (Copyright © 2019 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

: The Biologically Oriented Preparation Technique (BOPT), developed by Ignacio Loi and published in 2008, is a consolidated concept in the modeling and preservation of pericoronal soft tissues. The present study describes the analogical and digital methods allowing adequate design and preparation of the emergence profile of BOPT crowns in the working model, with a view to comparing the workflow and advantages of each method. At present, not all the digital procedures have been fully optimized to completely replace the traditional analogical methods. Nevertheless, it is only a matter of time until dental digitalization technology totally replaces the analogical clinical methods. The digital workflow for this procedure is quickly implemented and optimized, and represents the most realistic option, with possibilities for further development in the immediate future., Competing Interests: The authors declare no conflict of interest.