Search

The firmware developed for the readout and trigger processing of the information emerging from the BIS78-RPC Muon Spectrometer chambers in the ATLAS experiment at CERN is presented here, together with data processing techniques, data acquisition software, and tests of the readout chain system, which represent efforts to make these chambers operational in the ATLAS experiment. This work is performed in the context of the BIS78-RPC project, which deals with the pilot deployment of a new generation of sMDT+RPCs in the experiment. Such chambers are planned to be fully deployed in the whole barrel inner layer of the Muon Spectrometer during the Phase II upgrade of the ATLAS experiment. On-chamber front-ends include an amplifier, a discriminator ASIC, and an LVDS transmitter. The signal is digitized by CERN HPTDC chips and then processed by an FPGA, which is the heart of the readout and trigger processing, using various techniques. [ABSTRACT FROM AUTHOR]

The upgrade of the A Toroidal LHC ApparatuS (ATLAS) hadronic Tile Calorimeter (TileCal) Low-Voltage Power Supply (LVPS) forms a part of the Phase-II Upgrade preparations undertaken by the ATLAS experiment for the data taking during the High-Luminosity Large Hadron Collider era. This paper serves to provide a detailed overview of the development of a Burn-in test station for an upgraded LVPS component known as a Brick. The production, quality assurance testing, and all associated apparatus are being jointly undertaken by the University of the Witwatersrand (Wits) and the University of Texas at Arlington (UTA). These Bricks are radiation-hard transformer-coupled buck converters that function to step-down bulk 200 VDC power to the 10 VDC required by the on-detector electronics. To ensure the high reliability of the Bricks, once installed within the TileCal, a Burn-in test station has been designed and built. The Burn-in station functions to implement a Burn-in procedure on eight Bricks simultaneously. This procedure subjects the Bricks to sub-optimal operating conditions, which function to accelerate their ageing, as well as to stimulate failure mechanisms. This results in elements of the Brick that would fail prematurely within the TileCal failing within the Burn-in station or experience performance degradation that can be detected by follow-up testing effectively screening out the non-performative sub-population. The Burn-in station is of fully custom design in both its hardware and software. The development of the test station will be explored in detail; the preliminary Burn-in procedure to be employed will be provided; the preliminary and final commissioning of the test station will be presented. The paper will culminate in the presentation and discussion of the Burn-in of a V8.4.2 Brick and the future outlook of the project. [ABSTRACT FROM AUTHOR]

Since the beginning of the third millennium, significant growth in the usage of conventional air conditioning systems was observed. This increase caused an enhancement in building electricity consumption. Therefore, the development of solar air conditioning systems applied to buildings is of great interest. However, it is essential to understand and assess this alternative solution. In this regard, this study focuses on solar cooling technology as an alternative to conventional air conditioning systems, which consume a significant amount of electricity. A mathematical model of a single-effect absorption chiller was developed using TRNSYS software to analyze the dynamic behavior of the system. The energy performance of the solar cooling system was evaluated by analyzing the solar fraction, coefficient of performance, and thermal efficiency. The optimal size of the solar panel surface and storage reservoir capacity were determined for Oujda, Morocco's climatic conditions. Simulation results showed that a 600 m2 flat plate collectors (FPC) with a 2.5 m3 storage tank could sustain a peak load of 108 kW while ensuring continuous performance. The system's efficiency was improved by maximizing useful energy and minimizing supplementary energy consumption, achieving a significant monthly average solar fraction in July to meet cooling demand. The coefficient of performance of the absorption chiller was found to be 0.53, maintaining a chilled temperature of 6.67°C. These findings demonstrate the potential of solar cooling technology as an effective and sustainable alternative for building air conditioning. [ABSTRACT FROM AUTHOR]

The electrical power consumption of refrigeration equipment leads to a significant influence on the supply network, especially on the hottest days during the cooling season (and this is besides the conventional electricity problem in Iraq). The aim of this work is to investigate the energy performance of a solar-driven air-conditioning system utilizing absorption technology under climate in Baghdad, Iraq. The solar fraction and the thermal performance of the solar air-conditioning system were analyzed for various months in the cooling season. It was found that the system operating in August shows the best monthly average solar fraction (of 59.4%) and coefficient of performance (COP) (of 0.52) due to the high solar potential in this month. Moreover, the seasonal integrated collector efficiency was 54%, providing a seasonal solar fraction of 58%, and the COP of the absorption chiller was 0.44, which was in limit, as reported in the literature for similar systems. A detailed parametric analysis was carried out to evaluate the thermal performance of the system and analyses, and the effect of design variables on the solar fraction of the system during the cooling season. [ABSTRACT FROM AUTHOR]