Search

Multi-resonant plasmonic simple geometries like nanocylinders and nanorods are highly interesting for two-photon photoluminescence and second harmonic generation applications, due to their easy fabrication and reproducibility in comparison with complex multi-resonant systems like dimers or nanoclusters. We demonstrate experimentally that by using a simple gold nanocylinder we can achieve a double resonantly enhanced two-photon photoluminescence of quantum dots, by matching the excitation wavelength of the quantum dots with a dipolar plasmon mode, while the emission is coupled with a radiative quadrupolar mode. We establish a method to separate experimentally the enhancement factor at the excitation and at the emission wavelengths for this double resonant system. The sensitivity of the spectral positions of the dipolar and quadrupolar plasmon resonances to the ellipticity of the nanocylinders and its impact on the two-photon photoluminescence enhancement are discussed.

The purpose of this study was to evaluate the effects of a simple motivational treatment (consisting of immediate feedback, goal setting, and positive reinforcement) on the reading performance of an 11-year-old boy with learning difficulties. We applied an ABAB reversal design to test the impact of our approach. The dependent measure was the number of correctly read words from a children's book within 5 minutes. Results indicate that whenever the intervention was in place, the student showed greater achievements than during baseline conditions. The implications of employing simple motivational techniques to increase reading performance are outlined, and the limitations of the study are discussed. [Note: The issue number (2) shown on the pdf is incorrect. The correct issue number is 1.]

Abstract Background Most German hospitals do not offer a trial of labour after two caesarean sections (TOLA2C). TOLA2C is claimed to be associated with too many complications, above all the high risk of uterine rupture. The objective of this study is to review our experience with TOLA2C, with special attention paid to the risk and probability of uterine ruptures. Secondary outcomes include comparing neonatal and maternal outcomes in the group of TOLA2C with the group of elective repeat caesarean section (ERCS) and to assess the success rate for vaginal birth after two caesarean sections (VBAC-2). Methods The retrospective cohort study was conducted in a community hospital in North Rhine-Westphalia. Inclusion criteria were all pregnant women with two caesarean sections in their medical history, with a current vertex singleton pregnancy and the absence of morphological abnormalities of the foetus, who gave birth in our facility between January 2015 and June 2021. Descriptive statistics were calculated and Kolmogorov-Smirnov tests, Mann-Whitney U tests, Fishers exact tests, Chi2 –tests and t-tests for independent samples were performed. Results A total of 91 cases were included in the TOLA2C-group. These were compared to 99 cases that, within the same time frame, had an elective repeat caesarean section (ERCS-group). There was no statistically significant difference found in the neonatal outcome between the two groups (except for the neonatal pH-value: p 0.024). The hospital stay was significantly shorter in the TOLA2C-group, while maternal complication rates were almost similar (13.2% in the TOLA2C-Group, vs. 16.2% in the ERCS-Group). The success rate for TOLA2C was 55%. No complete uterine rupture was found, but in three cases an incomplete rupture (3.3% rate for incomplete uterine ruptures) occurred, but had no influence on the neonatal outcome. Conclusion TOLA2C is not associated with a worse maternal or neonatal outcome compared to ERCS, and especially the risk of complete uterine ruptures seems to be low. TOLA2C should be more widely offered to suitable patients who are motivated for it.

Jenni Neubert,1 Susanne Wagner,2 Jürgen Kiwit,3 Anja U Bräuer,1,* Jana Glumm1,3,* 1Institute of Cell Biology and Neurobiology, Center for Anatomy, 2Institute for Radiology, Charité-Universitaetsmedizin Berlin, 3Clinic for Neurosurgery, HELIOS Klinikum Berlin-Buch, Berlin, Germany *These authors contributed equally to this work Abstract: The physicochemical properties of superparamagnetic iron oxide nanoparticles (SPIOs) enable their application in the diagnostics and therapy of central nervous system diseases. However, since crucial information regarding side effects of particle–cell interactions within the central nervous system is still lacking, we investigated the influence of novel very small iron oxide particles or the clinically approved ferucarbotran or ferumoxytol on the vitality and morphology of brain cells. We exposed primary cell cultures of microglia and hippocampal neurons, as well as neuron–glia cocultures to varying concentrations of SPIOs for 6 and/or 24 hours, respectively. Here, we show that SPIO accumulation by microglia and subsequent morphological alterations strongly depend on the respective nanoparticle type. Microglial viability was severely compromised by high SPIO concentrations, except in the case of ferumoxytol. While ferumoxytol did not cause immediate microglial death, it induced severe morphological alterations and increased degeneration of primary neurons. Additionally, primary neurons clearly degenerated after very small iron oxide particle and ferucarbotran exposure. In neuron–glia cocultures, SPIOs rather stimulated the outgrowth of neuronal processes in a concentration- and particle-dependent manner. We conclude that the influence of SPIOs on brain cells not only depends on the particle type but also on the physiological system they are applied to. Keywords: microglia, hippocampal neurons, degeneration, morphology, nanoparticles

Plasticity-related gene (PRG) 5 is a vertebrate specific membrane protein, that belongs to the family of lipid-phosphate phosphatases (LPPs). It is prominently expressed in neurons and is involved in cellular processes such as growth-cone guidance and spine formation. At a functional level, PRG5 induces filopodia in non-neuronal cell lines, as well as the formation of plasma membrane protrusions in primary cortical and hippocampal neurons. Overexpression of PRG5 in immature neurons leads to the induction of spine-like structures, and regulates spine density and morphology in mature neurons. Understanding spine formation is pivotal, as spine abnormalities are associated with numerous neurological disorders. Although the importance of PRG5 in neuronal function is evident, the precise mechanisms as to how exactly it induces membrane protrusions and orchestrates cellular processes remain unresolved. Here we used in vitro biochemical assays to demonstrate that in HEK293T cells a large fraction of PRG5 can be found in homo dimers and lager multimers. By using Fluorescence Lifetime Imaging (FLIM) to quantify Förster Resonance Energy Transfer (FRET), we were able to visualize and quantify the specific localization of PRG5 multimers in living HEK293T cells and in fixed immature primary hippocampal neurons. Here, we provide the first evidence that PRG5 multimers are specifically localized in non-neuronal filopodia, as well as in neuronal spine-like structures. Our findings indicate a potential functional role for PRG5 multimerization, which might be required for interaction with extracellular matrix molecules or for maintaining the stability of membrane protrusions.

Abstract Accurate measurement of core temperature is of utmost importance during on-pump cardiac surgery, for detection of hypothermia before cardiopulmonary bypass (CPB), guidance of temperature management on CPB, active rewarming on CPB and guidance of warming therapy after CPB. Most temperature measurement methods are known to become inaccurate during rapid changes in core temperature and suffer from delayed detection of temperature changes. Zero-heat-flux temperature (ZHF) measurement from the lateral forehead may be an alternative, non-invasive method quantifying the core temperature. A prospective, observational, multicentre study was conducted in one hundred patients scheduled for on-pump coronary artery bypass grafting. Core temperatures were measured every minute by two zero-heat-flux thermometer (SpotOn™) and a bladder thermometer and a pulmonary artery catheter (PAC) in the period after induction of anesthesia until CPB. Accuracy and precision of both methods were compared against core temperature measured in the pulmonary artery using the method of Bland and Altman. A high accuracy (around 0.1 °C) and a very good precision (Limits of agreement (LoA) − 0.6; 0.4 °C) were found between zero-heat-flux thermometer and core temperature measured by PAC. Among the two ZHF thermometers the bias was negligible (− 0.003 °C) with narrow LoA of − 0.42 °C and 0.41 °C. In contrast, bias between bladder temperature and PAC temperature was large (0.51 °C) with corresponding LoA of − 0.06 °C and 1.1 °C. ZHF thermometers are in contrast to bladder temperature a reliable core temperature monitor in cardiac surgery during the period after induction of anestesia until CPB. The zero-heat-flux method can provide clinicians reliably with continuous and non-invasive measurements of core temperature in normothermic and mild hypothermic temperature ranges and therefore can be helpful to guide temperature management.

This exploratory study examines the complex dynamics of human–dog relationships and their impact on interspecies communication. Twelve human–dog dyads were studied using narrative interviews to explore how people perceive their relationships with their dogs. In addition, the dyads engaged in a cooperative task to observe interaction dynamics during everyday activities. This study shows that individual expectations frame interactions and that traditional notions of dog ownership are evolving into more family-like relationships. Effective communication relies on a nuanced mix of verbal and non-verbal cues, with empathy emerging as a fundamental element guiding these interactions. Our findings underline the profound influence of human expectations, knowledge and empathy on communication with dogs. They also highlight the critical role of compatibility between human and dog dyads, and emphasize that such compatibility is a key determinant of satisfaction in interspecies relationships. These findings contribute to a deeper understanding of how human factors modulate communication and satisfaction in human–animal interactions.

Hands-on courses utilizing preserved human tissues for educational training offer an important pathway to acquire basic anatomical knowledge. Owing to the reevaluation of formaldehyde limits by the European Commission, a joint approach was chosen by the German-speaking anatomies in Europe (Germany, Austria, Switzerland) to find commonalities among embalming protocols and infrastructure. A survey comprising 537 items was circulated to all anatomies in German-speaking Europe. Clusters were established for "ethanol"-, formaldehyde-based ("FA"), and "other" embalming procedures, depending on the chemicals considered the most relevant for each protocol. The logistical framework, volumes of chemicals, and infrastructure were found to be highly diverse between the groups and protocols. Formaldehyde quantities deployed per annum were three-fold higher in the "FA" (223 L/a) compared to the "ethanol" (71.0 L/a) group, but not for "other" (97.8 L/a), though the volumes injected per body were similar. "FA" was strongly related to table-borne air ventilation and total fixative volumes =1000 L. "Ethanol" was strongly related to total fixative volumes >1000 L, ceiling- and floor-borne air ventilation, and explosion-proof facilities. Air ventilation was found to be installed symmetrically in the mortuary and dissection facilities. Certain predictors exist for the interplay between the embalming used in a given infrastructure and technical measures. The here-established cluster analysis may serve as decision supportive tool when considering altering embalming protocols or establishing joint protocols between institutions, following a best practice approach to cater toward best-suited tissue characteristics for educational purposes, while simultaneously addressing future demands on exposure limits.

Using the comparative approach, researchers draw inferences about the evolution of cognition. Psychologists have postulated several hypotheses to explain why certain species are cognitively more flexible than others, and these hypotheses assume that certain cognitive skills are linked together to create a generally "smart" species. However, empirical findings suggest that several animal species are highly specialized, showing exceptional skills in single cognitive domains while performing poorly in others. Although some cognitive skills may indeed overlap, we cannot a priori assume that they do across species. We argue that the term "cognition" has often been used by applying an anthropocentric viewpoint rather than a biocentric one. As a result, researchers tend to overrate cognitive skills that are human-like and assume that certain skills cluster together in other animals as they do in our own species. In this paper, we emphasize that specific physical and social environments create selection pressures that lead to the evolution of certain cognitive adaptations. Skills such as following the pointing gesture, tool-use, perspective-taking, or the ability to cooperate evolve "independently" from each other as a concrete result of specific selection pressures, and thus have appeared in distantly related species. Thus, there is not "one cognition". Our argument is founded upon traditional Darwinian thinking, which--although always at the forefront of biology--has sometimes been neglected in animal cognition research. In accordance with the biocentric approach, we advocate a broader empirical perspective as we are convinced that to better understand animal minds, comparative researchers should focus much more on questions and experiments that are ecologically valid. We should investigate nonhuman cognition for its own sake, not only in comparison to the human model.

The concept of the metaorganism describes a multicellular host and its diverse microbial community, which form one biological unit with a combined genetic repertoire that significantly influences health and survival of the host. The present study delved into the emerging field of bacteriophage research within metaorganisms, focusing on the moon jellyfish Aurelia aurita as a model organism. The previously isolated Pseudomonas phage BSwM KMM1 and Citrobacter phages BSwM KMM2 – KMM4 demonstrated potent infectivity on bacteria present in the A. aurita-associated microbiota. In a host-fitness experiment, Baltic Sea subpopulation polyps were exposed to individual phages and a phage cocktail, monitoring polyp survival and morphology, as well as microbiome changes. The following effects were obtained. First, phage exposure in general led to recoverable malformations in polyps without affecting their survival. Second, analyses of the community structure, using 16S rRNA amplicon sequencing, revealed alterations in the associated microbial community in response to phage exposure. Third, the native microbiota is dominated by an uncultured likely novel Mycoplasma species, potentially specific to A. aurita. Notably, this main colonizer showed resilience through the recovery after initial declines, which aligned with abundance changes in Bacteroidota and Proteobacteria, suggesting a dynamic and adaptable microbial community. Overall, this study demonstrates the resilience of the A. aurita metaorganism facing phage-induced perturbations, emphasizing the importance of understanding host-phage interactions in metaorganism biology. These findings have implications for ecological adaptation and conservation in the rapidly changing marine environment, particularly regarding the regulation of blooming species and the health of marine ecosystems during ongoing environmental changes.

Purpose: The aim of this study is to develop a test bench, which integrates different complexity levels and enables in that way a flexible and dynamic testing for mid and long term intervals as well as testing of maximum loads till implant failure of different osteosynthesis systems on the mandible.Material and Methods: For this purpose, an analysis of the state of the art regarding existing test benches was combined with interviews of clinical experts to acquire a list of requirements. Based on these requirements a design for a modular test bench was developed. During the implementation of the test stand, functional tests were continuously carried out and improvements made. Depending on the level of complexity, the test bench can be used either as an incorporated variant or as a standalone solution. In order to verify the performance and the degree of fulfilment of the requirements of these two variants of the test bench, preliminary studies were carried out for all levels of complexity. In these preliminary studies, commercially available osteosynthesis and reconstruction plates were investigated for their biomechanical behaviour and compared with data from the literature.Results: In total, fourteen test runs were performed for the different levels of complexity. Firstly, five test runs were executed to test the simplified load scenario in the incorporated variant of the test bench. High forces could be transmitted without failure of the miniplates. Secondly a quasi-static test scenario was examined using the incorporated variant with simplified load insertion. Five experiments with a number of cycles between 40,896 and 100,000 cycles were carried out. In one case the quasi-static testing resulted in a fracture of the tested reconstruction plate with a failure mode similar to the clinical observations of failure. The last four test runs were carried out using the standalone variant of the test bench simulating complex load patterns via the insertion of forces through imitated muscles. During the test runs joint forces were measured and the amplitude and vector of the resulting joint forces were calculated for both temporomandibular joints. Differences in the force transmission depending on the implant system in comparison to the zero sample could be observed.Conclusion: The presented modular test bench showed to be applicable for examination of the biomechanical behavior of the mandible. It is characterized by the adjustability of the complexity regarding the load patterns and enables the subsequent integration of further sensor technologies. Follow-up studies are necessary to further qualify and optimize the test bench.