Search

We present a new semi-analytical formalism for modelling metal absorption lines that emerge from a clumpy galactic environment, ALPACA. We predict the "down-the-barrel" (DTB) metal absorption line profiles and the equivalent width (EW) of absorption at different impact parameters (b) as a function of the clump properties, including clump kinematics, clump volume filling factor, clump number density profile, and clump ion column densities. With ALPACA , we jointly model the stacked DTB C  ii  λ1334 spectrum of a sample of z ∼ 3 Lyman break galaxies and the EW versus b profile of a sample of z ∼ 2 star-forming galaxy–galaxy pairs. ALPACA successfully reproduced two data sets simultaneously, and the best fit prefers a low clump volume filling factor (∼3 × 10−3). The radial velocities of the clumps are a superposition of a rapidly accelerated outflow with a maximum velocity of |$\sim 400 \, {\mathrm{km}\, \mathrm{s}^{-1}}$| and a velocity dispersion of |$\sigma \sim 120 \, {\mathrm{km}\, \mathrm{s}^{-1}}$|⁠. The joint modelling reveals a physical scenario where the absorption observed at a particular velocity is contributed by the clumps distributed over a fairly broad range of radii. We also find that the commonly adopted Sobolev approximation is at best only applicable within a narrow range of radii where the clumps are undergoing rapid acceleration in a non-volume-filling clumpy medium. Lastly, we find that the clump radial velocity profile may not be fully constrained by the joint modelling and spatially resolved Ly α emission modelling may help break the degeneracy. [ABSTRACT FROM AUTHOR]

The stretching of the lithosphere leading to back-arc basins formation generally develops behind arc-trench systems and is considered the consequence of slab retreat relative to the upper plate. Here, we examine the deformation regime evolution within the overriding plate due to subduction processes, using thermo-mechanical numerical simulations. We explore the north-eastern Eurasia plate boundary and the mechanisms of subducting Pacific plate since 57 Ma. During this time interval, several extensional basins formed along the Eurasia margin, such as the East China Sea, the Japan Sea, and the Kuril basin. Here, we increased the simulation complexity, with the inclusion of (i) the kinematic variability of the Pacific plate over the geological past with respect to a fixed Eurasia, incorporating time-dependent (i.e., temporally evolving) velocities computed from plate motion reconstructions; (ii) a Low-Velocity Zone within the asthenosphere, and (iii) a horizontal eastward mantle flow. Our results show a crucial role of the mantle flow for the development of lithospheric extension and back-arc basin opening, and a main kinematic control of the subduction trench position, which advances and retreats, into distance intervals in the order of ∼ 100 km, and providing stages of compression and extension in a back-arc basin. [ABSTRACT FROM AUTHOR]

BACKGROUND: Lower limb peri-knee muscle strength training and neuromuscular electrical stimulation are generally safe and effective rehabilitation methods for patellofemoral joint pain, but the mechanism of their intervention is still unclear. OBJECTIVE: To determine the effect of muscle strength training combined with neuromuscular electrical stimulation on pain, lower extremity function and biomechanical characteristics in patients with patellofemoral pain. METHODS: Thirty-seven patients with patellofemoral pain were randomly divided into muscle strength training combined with electrical stimulation group (trial group, n=19) and muscle strength training group (control group, n=18). Both groups underwent intervention training for 6 weeks, three times a week. The visual analog scale and anterior knee pain scale were used to evaluate the pain level and functional level of the knee. Kinematic and kinetics data during running were collected by using an infrared motion capture system and a three-dimensional force platform simultaneously. A two-way analysis of variance with repeated measures (group*time) was applied to analyze the data. RESULTS AND CONCLUSION: (1) After the intervention, the visual analog scale scores of the trial group and the control group were significantly decreased (P < 0.001), and the anterior knee pain scale scores were significantly increased (Ptrial group < 0.001, Pcontrol group=0.001) in the trial group and control group. The anterior knee pain scale scores of the trial group were significantly higher compared to the control group after the intervention (P=0.001). (2) The peak knee flexion angle (P=0.011), peak knee extension moment (P < 0.001), the peak knee internal rotation moment (P=0.008), the peak patellofemoral stress (P < 0.001) and the peak patellofemoral contact force (P < 0.001) were significantly decreased in the trial and control groups during running after the intervention compared with those before the intervention. (3) In conclusion, both muscle strength training and muscle strength training combined with electrical stimulation training are helpful to improve the subjective pain and lower limb function of patellofemoral pain patients, enhance the movement pattern during running and reduce the stress of the patellofemoral joint. Compared with muscle strength training alone, muscle strength training combined with electrical stimulation can improve lower limb function more significantly. [ABSTRACT FROM AUTHOR]

Introduction: Patient satisfaction is an important outcome of total knee arthroplasty (TKA). However, we cannot predict how and why patients are satisfied or dissatisfied with TKA. The hypothesis of this study was that patient-reported outcomes (PROs) correlate with in vivo kinematics after TKA. Materials and methods: One hundred knees were analyzed after TKA. The in vivo kinematics of deep knee bending motion were estimated from single-plane fluoroscopy using a two-to-three-dimensional registration technique. Active knee flexion, femoral rotation and rollback were evaluated. The PROs were obtained after surgery using the 2011 Knee Society Scoring System (KSS), and their relationship with in vivo kinematics was determined. Results: The average minimum and maximum flexion were −2.4 ± 7.3° and 113.2 ± 13.6°, respectively. The average femoral rotation was 7.4 ± 3.4°, and the average medial and lateral rollback were 2.4 ± 4.8 mm and 7.2 ± 5.6 mm, respectively. The multiple regression analysis revealed that the maximum flexion angle significantly contributed to symptoms and satisfaction. In addition, lateral rollback was also a significant factor affecting patient satisfaction. Lateral rollback and lateral Anterior-Posterior (AP) position at maximum flexion were correlated with the maximum flexion angle, whereas femoral rotation did not correlate with flexion angles. Conclusions: Maximum flexion and lateral rollback are important for better patient satisfaction after TKA. To obtain the maximum flexion angle, it was necessary to perform the normal kinematic pattern with a large amount of lateral rollback. [ABSTRACT FROM AUTHOR]

Surface roughness has a significant influence on the mechanical properties and service life of a component. During face milling, surface roughness greatly varies in the tool step direction and can be controlled by using a surface roughness prediction model. However, the issues of accuracy and efficiency of surface roughness prediction models have not been adequately addressed. This study aims to address these research constraints. An improved surface roughness prediction model is proposed, taking into consideration the influences of insert back cutting and stepover ratio. First, the profile-forming mechanism is analyzed based on geometry and kinematics. Subsequently, an improved surface roughness prediction model is established. Thereafter, the influence of feed per tooth, stepover ratio, corner radius, and minor cutting edge angle on surface roughness are analyzed through numerical simulation. Finally, the experiment of face milling aerospace aluminum alloy 7075 is suggested to verify the improved model, and the Z-Map model is introduced for comparison. Results show that the surface roughness is nonlinear with a feed per tooth and stepover ratio, a monotonic variation with corner radius, and a minor cutting edge angle. The predicted values of the improved model and the Z-Map model for the Rsm are equal to the experimental values. However, the improved model reduces the prediction error of Ra from 11.2 to 4.2% in the non-overlapping compared with the Z-Map model and from 62.58 to 13.34% in the overlapping. In addition, the improved model performs better than the Z-Map model in predicting the shape parameters. This work serves as a significant reference for selecting and optimizing the milling parameters to enable machining quality control. [ABSTRACT FROM AUTHOR]

To assess the skiing economy (SE) and kinematics during double poling (DP) roller skiing between two groups of skiers in a field setting. Five experienced and five novice male skiers performed a SEDP test at 16 km∙h−1 on an outdoor athletics track. Gas exchange parameters were measured to determine SEDP. A two-dimensional video was filmed to measure the kinematics variables. Experienced skiers exhibited a 21% lower oxygen cost than novice skiers (p = 0.016) in DP, indicating a strong association between SEDP, cycle length and cycle rate (p < 0.001). Additionally, before the poling phase, experienced skiers manifested significantly greater maximum hip and knee extension angles than novice skiers (p < 0.001). During the poling phase, experienced skiers with a greater pole plant angle (p = 0.001), longer flexion time (p < 0.001) and higher flexion angular velocity in the elbow joint (p < 0.05) demonstrated better SEDP. There was an interaction effect of the one-repetition maximum bench press × group in SEDP (b = − 0.656, SE = 0.097, t = − 6.78, p = 0.001). Therefore, experienced skiers with better SEDP demonstrated more efficient cycles, potentially accomplished using dynamic full-body DP motion to ascertain effective propulsion. Combined upper body strength and ski-specific skill training may enhance SEDP in novice skiers. [ABSTRACT FROM AUTHOR]

The lower-extremity kinematics associated with forward jump landing after an ankle injury is known to differ for patients with Chronic Ankle Instability (CAI), copers (injured but asymptomatic patients), and healthy individuals. However, the differences in the lower extremity kinematics of these groups associated with a Single-leg Lateral Drop Landing (SLDL) are unknown. The purpose of this study is to characterize the lower limb and foot kinematics during SLDL in CAI patients and to compare these characteristics with those of the copers and healthy individuals. This was a cross-sectional observational study. Nineteen participants, each, were selected from the CAI, Coper, and control groups. The lower-extremity kinematics during SLDL was measured using three-dimensional motion analysis over an interval progressing from 200 ms before landing to 200 ms after landing. Either one-way ANOVA or the Kruskal–Wallis test was used to compare the attributes of the respective groups, with each parameter measured every 10 ms. The maximum values and excursions of the parameters were established over time intervals progressing from 200 ms before landing to 200 ms after landing. Significant observations were subjected to post hoc analysis. Compared to the Coper group, the CAI group exhibited significantly smaller hip adduction angles at 160 ms, ankle dorsiflexion angles in the 110–150 ms interval, and maximum ankle dorsiflexion angles after landing. Compared to the control group, the CAI group exhibited significantly smaller excursions of MH inversion/eversion after landing. Our findings confirm the necessity of focusing on the kinematics of hip adduction/abduction and plantar/dorsiflexion during SLDL in evaluating patients with ankle injuries. [ABSTRACT FROM AUTHOR]

Background: The importance of several scapulothoracic muscles, including trapezius and serratus anterior, in maintaining physiological scapula kinematics has been highlighted in the past. However, the relationship between the scapula and the latissimus dorsi muscle remains unclear. Our clinical surgical observation is that the latissimus dorsi does not directly attach but rather runs superficial to the inferior angle of the scapula. Based on this observation, we hypothesise that the latissimus dorsi creates a dynamic track on which the scapula glides under the muscle belly during elevation of the arm, creating the latissimus-scapula overlap (LSO). Methods: All consecutive patients who had a whole-body computed tomography scan (CT) in case of polytrauma evaluation between 2018 and 2021, with complete depiction of the scapula and latissimus dorsi muscle, were analysed. 150 shoulders in 90 patients with arms up were matched according to their age (within five years), gender, and affected side with 150 shoulders in 88 patients with arms down. Patients with pathologies of the upper extremities or thorax that potentially could alter LSO measurements were excluded. LSO was calculated as a ratio of the measured area of the latissimus dorsi projection on the scapula and the total scapula area. Results: The mean age of the 178 patients (48 females; 13 males) was 60 years. The arms-up group showed a significantly higher LSO than the arms-down group (19.9 ± 6.3% vs. 2.7 ± 2.2%; p < 0.0001). In the arms-up group, approximately one fifth of the scapula was overlapped inferiorly by the muscle belly of the latissimus dorsi, contrary to the almost non-existing LSO in the arms-down group. Conclusion: With arms up, humans show a significantly higher LSO in comparison to arms down indicating that the latissimus dorsi indeed creates a dynamic track on which the scapula is forced to travel during abduction of the arm. This finding of increased LSO during the elevation of the arm warrants further consideration of the role of the latissimus dorsi in scapula kinematics and potentially scapular dyskinesis. Level of evidence: Level two diagnostic study. [ABSTRACT FROM AUTHOR]

The structural connectivity and kinematic relationship between the Altyn Tagh sinistral strike‐slip fault (ATF) and Qilian Shan fold‐and‐thrust belt along the north Tibetan margin east of 96°E is an important question for tectonicists interested in the evolving active deformation field of Central Asia and associated earthquake hazards of China's Hexi Corridor region. New results from a detailed 130‐km‐long N‐S magnetotelluric (MT) survey from the Qilian Shan to Beishan elucidates the locations and down‐dip orientations of major faults. Importantly, the results indicate that the Heishan‐Jinta'Nanshan fault system roots steeply into the lower crust, is unconnected to the Qilian Shan thrust wedge, and has reactivated the margin of the North China Craton and an older, regional ductile shear belt. The structurally linked ATF‐Heishan‐Jinta'Nanshan system defines a fundamental kinematic boundary in central Asia between the NE directed Qilian Shan thrust belt to the south and the eastwardly extruding Beishan‐Alxa Block to the north. Plain Language Summary: In this study, we present results of a comprehensive electrical resistivity survey conducted in the western Hexi Corridor region of China. The survey reveals significant sub‐surface faults and crustal boundaries, providing insights into the crustal structure between northernmost Tibet (Qilian Shan) and the Beishan. We document how the strike‐slip crustal boundary known as the Altyn Tagh Fault (ATF)‐Heishan‐Jinta'Nanshan system is steep and spatially unconnected to the Qilian Shan east of 98°E. It separates crustal blocks with contrasting motion histories; the southern block experiences compressional deformation, whereas the northern block accommodates extensional and transtensional deformation. Furthermore, the northeast trending ATF bends and converges into the more east‐west‐oriented Heishan‐Jinta'Nanshan system. We propose that this is a result of the Heishan‐Jinta'Nanshan system reactivating an older ductile shear belt and a mechanically weak boundary along the northwestern margin of the Precambrian North China Craton. Our study confirms the significance of inherited crustal structures in localizing continental interior reactivation and associated earthquake hazards. Key Points: A new detailed 3D resistivity model from Northern Tibet to the Southern Beishan clarifies the crustal structure in the NW Hexi CorridorThe Heishan fault system penetrates steeply to the lower crust and is unconnected to the Qilian Shan thrust wedgeCrustal thickening and mountain uplift in Qilian Shan is kinematically separated from eastward Beishan‐Alxa Block extrusion further north [ABSTRACT FROM AUTHOR]

Background: Conflicting evidence has been reported regarding the biomechanical relevance of ramp lesions (RLs) on knee kinematics. Furthermore, the influence of the defect size of the RLs on anterior tibial translation (ATT) and external rotation (ER) is currently unknown. Purpose: To evaluate the influence of RL defect size on knee kinematics in anterior cruciate ligament (ACL) deficiency and after simulated ACL reconstruction (sACLR). Study Design: Controlled laboratory study. Methods: Eight cadaveric knee specimens were tested in a 6 degrees of freedom robotic test setup. Force-controlled clinical laxity tests were performed with 200 N of axial compression in 0°, 30°, 60°, and 90° of flexion: 5 N·m internal rotation (IR)/ER torque, 134 N ATT force, and an anteromedial drawer test consisting of 134 N ATT force under 5 N·m ER torque. After determining the native knee kinematics, the ACL was cut at the tibial insertion, followed by a transosseous refixation to simulate a surgical repair or reconstruction (simulated ACL reconstruction; sACLR). An RL was sequentially created with a length of 1, 2, and 3 cm. Each state of the RL was evaluated in the ACL-deficient state and after sACLR. Results: In the ACL-deficient state, only an RL of 3 cm length resulted in a significant increase of ATT in 30° of flexion (mean difference 0.73 mm; 95% CI, 0.36-1.1 mm). After sACLR, an RL had no significant effect. When looking at ER, an RL significantly increased ER in full extension in the ACL-deficient state in 2 cm (mean difference 0.9°; 95% CI, 0.08°-1.74°) and 3 cm length (mean difference 1.9°; 95% CI, 0.57-3.25). Furthermore, a 3-cm RL significantly increased IR in 0° of flexion in the ACL-deficient state (mean difference 1.9°; 95% CI, 0.2°-3.6°). No effect of ramp lesions on rotation was found after sACLR. Conclusion: RLs result in a small increase in ATT, ER, and IR in ACL-deficient knees at early flexion angles, but not after sACLR. Clinical Relevance: Small RLs did not change time-zero knee kinematics and may, therefore, be left untreated, especially when the ACL is reconstructed. [ABSTRACT FROM AUTHOR]

The potential application of flapping wings in micro-aerial vehicles is gaining interest due to their ability to generate high lift even in confined spaces. Most studies in the past have investigated hovering wings as well as those flapping near solid surfaces. However, the presence of surface tension at the water-air interface and the ability of the water surface to move might differentiate its response to the proximity of wings, compared to that of solid surfaces. Motivated by underwater, amphibian robots and several underwater experimental studies on flapping wings, our study investigated the effects of the proximity of flapping wings to the water surface at low Reynolds numbers (Re = 3400). Experiments were performed on a rectangular wing in a water tank with prescribed flapping kinematics and the aerodynamic forces were measured. The effects of surface proximity on the wing in its both upright and inverted orientations were studied. Broadly, the mean lift and drag coefficients in both orientations decreased significantly (by up to 60%) as the distance from the water surface was increased. In the case of the upright orientation, the mean lift coefficient was slightly decreased very close to the water surface with its peak being observed at the normalized clearance of h/c¯=0.07. Overall, the study revealed an enhancement in the aerodynamic forces closer to the water surface. [ABSTRACT FROM AUTHOR]

In this manuscript, the advancement of one‐dimensional shock waves propagating through a non‐ideal reacting gas is examined. Considering the shock wave as a propagating discontinuity surface, a pair of evolution equations describing the strength of the shock and the first‐order discontinuity for variable initial data are obtained. The truncation approximations are used to obtain the exponent of shock velocity for the case of strong shock with constant initial data and compared with those exponents obtained from Guderley's scheme and Chisnell–Chester–Whitham (CCW) rule. The effects of non‐ideal and reaction parameters on the shock evolution in the case of arbitrary shock strength are examined and compared with those obtained from the CCW rule. Furthermore, the global behaviors of shock strength and induced discontinuity for different values of non‐ideal and reaction parameters are analyzed. [ABSTRACT FROM AUTHOR]

This study compared performance strategies and sub-technique selection in cross-country skate skiing sprint races, specifically individual time-trial (ITT) and head-to-head (H2H) formats. Fourteen male cross-country skiers from the Chinese national team participated in the FIS-sanctioned sprint race day. GNSS and heart rate sensors recorded positioning, skiing speeds, heart rate, sub-technique usage, and skiing kinematics. Statistical parametric mapping (SPM) was used to determine the course positions (clusters) where instantaneous skiing speed was significantly associated with section time. One-way analyses of variance were used to examine differences between the ITT and H2H. H2H race speeds were 2.4 ± 0.2% faster than the ITT race (p < 0.05).Variations in sub-technique and skiing kinematics were observed between race formats, indicating different strategies and tactics employed by athletes. SPM identified specific clusters (primarily uphill) where the fastest athlete gained significant time over the slowest. The greatest time gains were associated with higher G3 sub-technique usage and longer G3 cycle length on steep uphill terrain (9–13% gradients). Integrating SPM analyses and sub-technique assessments can help optimise performance and tactics in sprint races. This study enhances our understanding of cross-country skiing dynamics and performance variations among elite competitors. [ABSTRACT FROM AUTHOR]

BackgroundAimsMethods & ProceduresOutcomes & ResultsConclusionsPrimary progressive aphasia (PPA) is a neurodegenerative syndrome characterized by progressive language deficits. The main variants of PPA – semantic (svPPA), logopenic (lvPPA), and nonfluent (nfvPPA) – can be challenging to distinguish. Limb apraxia often co-occurs with PPA, but it is unclear whether PPA variants are associated with different gesture deficits. Prior evidence from stroke indicates that temporal lobe lesions are associated with reduced benefit from meaning in gesture performance. Temporal lesions are also associated with greater deficits in hand postures compared to arm kinematics in gesture imitation.We tested the hypothesis that svPPA, who primarily exhibit temporal lobe atrophy, would differentially show this pattern. In addition, we predicted that as a group, individuals with PPA would more accurately produce meaningful than meaningless gestures and kinematic components than hand postures, as found in neurotypical adults and individuals with stroke.Participants with PPA completed meaningful and meaningless gesture imitation tasks. Performance was scored for hand posture and arm kinematic components. Bayesian mixed-effect models examined trial-level gesture imitation accuracy, while controlling for dementia severity and random effects of subjects and items. Fixed effects included an interaction between PPA variant, task condition/meaning, and gesture component.We found a critical interaction between PPA variant, meaning, and gesture component. In particular, unlike lvPPA and nfvPPA, svPPA subjects’ hand postures failed to benefit from gesture meaning. This preliminary research extends prior findings on the role of the temporal lobe in action representations associated with manipulable objects, and is among the first to demonstrate distinct gesture imitation patterns between PPA variants.Characterizing gesture deficits in PPA may help inform diagnostics, compensatory communication strategies, and models of praxis. [ABSTRACT FROM AUTHOR]

We estimate the mass of the Large Magellanic Cloud (LMC) using the kinematics of 30 LMC globular clusters (GCs). We combine proper motions measured with the Hubble Space Telescope, Gaia, or a combination of the two, from a recent study by Bennet et al. with literature line-of-sight velocities (LOSVs) to give three components of motion. With these, we derive a 3D velocity dispersion anisotropy β = − 0.72 − 1.07 + 0.62 , consistent with the GCs forming a flattened system with significant azimuthal motion. We then apply a tracer mass estimator and measure an enclosed mass M (< 13.2 kpc) = 2.66 − 0.36 + 0.42 × 10 10 M ⊙. This is broadly consistent with results from previous studies of the LOSVs of GCs and other luminous tracers. Assuming a cosmologically constrained Navarro–Frenk–White distribution for the dark matter, this implies a virial mass M virial = 1.80 − 0.54 + 1.05 × 10 11 M ⊙. Despite being an extrapolation by almost an order of magnitude in radius, this result is consistent with published estimates from other methods that are directly sensitive to the LMC's total mass. Our results support the conclusion that the LMC is approximately 17 − 6 + 10 % of the Milky Way's mass, making it a significant contributor to the Local Group potential. [ABSTRACT FROM AUTHOR]

Wearable resistance (WR) and weighted vests (WV) can be used in almost all training conditions to enhance sprint performance; however, positioning and additional mass are different in WV and WR strategies, affecting performance and kinematics differently. We aimed to systematically review the literature, searching for intervention studies that reported the acute or chronic kinematic and performance impact of WV and WR and comparing them. We analyzed Pubmed, Embase, Scopus, and SPORTDiscuss databases for longitudinal and cross-over studies investigating sprint performance or kinematics using an inverse-variance with a random-effect method for meta-analysis. After the eligibility assessment, 25 studies were included in the meta-analysis. Cross-over WR and WV studies found significantly higher sprint times and higher ground contact times (CT) compared to unloaded (UL) conditions. However, WR presented a lower step frequency (SF) compared to UL, whereas WV presented a lower step length (SL). Only one study investigated the chronic adaptations for WR, indicating a superiority of the WR group on sprint time compared to the control group. However, no difference was found chronically for WV regarding sprint time, CT, and flight time (FT). Our findings suggest that using WV and WR in field sports demonstrates overload sprint gesture through kinematic changes, however, WR can be more suitable for SF-reliant athletes and WV for SL-reliant athletes. Although promising for chronic performance improvement, coaches and athletes should carefully consider WV and WR use since there is no supporting evidence that WV or WR will impact sprint performance, CT, and FT. [ABSTRACT FROM AUTHOR]

The Lancang metamorphic complex is a key component of the Three River Tethys Orogen in the SE Tibetan Plateau, with typical rock assemblages and deformation fabrics recording the subduction of the Paleo-Tethys Ocean and subsequent continental collision. In this study, we present new petrographic and structural observations, together with zircon U-Pb and mica 40Ar/39Ar geochronologic data, to reveal the deformation and kinematics of the Lancang metamorphic complex, thus providing insights into the Permian-Triassic evolution of the eastern Paleo-Tethys domain. The subduction of the Paleo-Tethys Ocean and subsequent collision resulted in a range of structural features, including penetrative regional foliations, thrusts, asymmetric folds at various scales, and ductile deformation fabrics such as asymmetric boudins and porphyroclasts. Zircon U-Pb dating of foliated gabbro and 40Ar/39Ar dating of mica schist and mylonite, which preserve shortening fabrics, suggest that the Paleo-Tethys Ocean was subducted during the Late Carboniferous to Permian-Early Triassic, and the collision of the Baoshan and Simao blocks mainly occurred during ca. 237-230 Ma in the SE Tibetan Plateau. Regional deformation likely shifted from shortening to extension ca. 230 Ma, as reflected by post-collision high-K calc-alkaline magmatism. Our results document regional structural patterns and place timing constraints on the evolution of the Paleo-Tethys Ocean. [ABSTRACT FROM AUTHOR]

Purpose: Tourniquet use during total knee arthroplasty (TKA) remains controversial. There are limited data demonstrating the effect of tourniquet use on flexion and extension gaps. The use of a tourniquet can theoretically affect the kinematics of the knee joint, specifically the extension and flexion gaps and the laxity, by mechanically compressing the soft tissues including the muscles above the knee joint. Therefore, this study was designed to prospectively evaluate changes in flexion and extension gaps with and without the use of a tourniquet. Methods: The following prospective study included 50 consecutive patients who underwent TKA using a surgical robot. The inclusion criteria were advanced osteoarthritis (OA) and varus‐alignment or valgus‐alignment <3° (hip‐knee‐ankle angle, standing long‐leg X‐ray), and the exclusion criteria were BMI >35 kg/m2 and mechanical axis in >3° valgus. A CR‐TKA was performed, and the medial and lateral gaps (in mm) throughout the full range of motion in 10° increments were recorded. The procedure was conducted both with and without an applied tourniquet (350 mmHg). Results: No significant differences were observed in the medial joint space. By contrast, the lateral gap showed significant differences in 10–20° of flexion (with a tourniquet 1.9 mm vs. without a tourniquet 2.1 mm, p = 0.018), 20–30° (1.6 vs. 1.8 mm, p = 0.02), 100–110° (0.9 vs. 1.1 mm, p = 0.021), and 110–120° (0.8 vs. 1 mm, p = 0.038). Thus, at the above degrees of flexion on the lateral side, there was a decrease in the mean of 0.2 mm with the use of a tourniquet. Conclusion: Although the use of a tourniquet showed a detectable change in the lateral gap in four 10° segments of flexion, clinical relevance with an average difference of 0.2 mm is not achieved. Thus, the use of a tourniquet in TKA can still be advocated based on the presented data. Level of Evidence: Level I. [ABSTRACT FROM AUTHOR]

According to the World Health Organization, one-third of elderly people aged 65 or over fall annually, and this number increases after 70. Several gait biomechanical parameters were associated with a history of falls. This study aimed to conduct a systematic review to identify and describe the gait biomechanical parameters related to falls in the elderly. MEDLINE Complete, Cochrane, Web of Science, and CINAHL Complete were searched for articles on 22 November 2023, using the following search sentence: (gait) AND (fall*) AND ((elder*) OR (old*) OR (senior*)) AND ((kinematic*) OR (kinetic*) OR (biomechanic*) OR (electromyogram*) OR (emg) OR (motion analysis*) OR (plantar pressure)). This search identified 13,988 studies. From these, 96 were selected. Gait speed, stride/step length, and double support phase are gait biomechanical parameters that differentiate fallers from non-fallers. Fallers also tended to exhibit higher variability in gait biomechanical parameters, namely the minimum foot/toe clearance variability. Although the studies were scarce, differences between fallers and non-fallers were found regarding lower limb muscular activity and joint biomechanics. Due to the scarce literature and contradictory results among studies, it is complex to draw clear conclusions for parameters related to postural stability. Minimum foot/toe clearance, step width, and knee kinematics did not differentiate fallers from non-fallers. [ABSTRACT FROM AUTHOR]

Specific aesthetic features of the object and observer's expertise seem to be related to the perception of motion aesthetics. How differing kinematic motion characteristics and their manifestation are related to the perception of motion aesthetics and how this relates to the observer's expertise is still investigated. It is hypothesized that different manifestations of the kinematic motion characteristics amplitude, fluency, and complexity are related to perceived motion aesthetics of dance skills and observer's expertise. Dancers' and non-dancers' perception of motion aesthetics was assessed when watching stick-figure video sequences of semi-standardized dance jumps, classified relating to three kinematic motion characteristics and their semantic differentials. Large, fluent, and complex dance jumps were perceived as more aesthetic than small, jerky, and simple jumps. There was no general effect on the observer's expertise. Nevertheless, non-dancers gave higher aesthetic ratings for complex dance jumps than dancers. Findings indicate that expertise does not relate to the perception of motion aesthetics per se. In contrast, specific kinematic motion characteristics of dance jumps do. Amplitude and fluency seem to be remarkable objective aesthetic qualities when perceiving motion aesthetics of dance skills. The observed dance skills' complexity appears to be a critical parameter when addressing observers with different expertise. [ABSTRACT FROM AUTHOR]

In this study, structural characteristics and response characteristics of a base isolated building are evaluated in Time-Frequency domain. Structure story responses and earthquake data set were recorded by the accelerometer network during the 1994 Northridge earthquake. Timefrequency domain continuous wavelet transform is used to monitor the variations of structural frequencies in time. In accordance with the efficiency of the base isolation, reduction of significant energy transmission to upper structure in the higher frequency range is traced instantaneously. The seismic base isolation performance of the observed structure can be identified and understood clearly in the time-frequency domain also. It has been observed that the time-frequency analysis is a very efficient method in terms of showing the variations of the earthquake effect and the behavior kinematics and design forces in the superstructure in time and frequency domain. [ABSTRACT FROM AUTHOR]

Hallux Rigidus is the result of degeneration of the 1st metatarsophalangeal joint (1st MTPJ). In end-stage hallux rigidus, treatment is mainly surgical with arthrodesis being a favourable option. Although the biomechanical effects of arthrodesis have been examined, a detailed comparison of pre- and post-operative biomechanics has yet to be conducted. Does 1st MTPJ arthrodesis positively affect foot kinematics and plantar pressure distribution? Twelve 1st MTPJ arthrodesis were performed in patients with a mean age of 53.5 ± 5.4 years and follow up time of 6.9 ± 1.0 months. Pre- and post-operative data were collected at a CMAS (Clinical Movement Analysis Society) accredited gait laboratory using a BTS motion capture system and pedobarographic pressure plates. Patient outcome measures were also assessed using the MOXFQ. Statistical analysis was conducted using a two-way repeated measures ANOVA. Significant changes in stride length, cycle duration, cadence and velocity were identified following 1st MTPJ arthrodesis. A significant reduction in forefoot-hallux dorsiflexion at toe-off was identified for the operated foot from the pre-operative (20.23 ± 5.98°) to post-operative (7.56 ± 2.96°) assessment. Post-operative sagittal and transverse plane changes in the operated foot were also identified. Peak pressure and PTI results indicated significant lateralisation of load for the operated foot, but importantly this was not influenced following arthrodesis. Finally, there was a significant improvement in MOXFQ score. Following 1st MTPJ fusion there is an improvement in overall gait mechanics which accompanied by the improved MOXFQ score indicates a reduction in pain and improved confidence during gait. The lack of post-operative dorsiflexion at forefoot-hallux caused load to remain lateralised and compensatory mechanisms to occur at the more proximal joints within the foot. These results provide valuable information for clinicians and will enable more accurate counselling to be provided to patients with end-stage hallux rigidus. • Stride length, cycle duration and cadence significantly increased. • There was an improvement in the patient reported outcome. • Forefoot-hallux dorsiflexion for the operated foot significantly reduced at toe-off for the operated foot. • Load remains weighed on the lateral aspect of the foot. • Compensatory kinematic mechanics occur at more proximal joints within the foot. [ABSTRACT FROM AUTHOR]

To study the body posture characteristics when walking with trolley case, and to explore the effects of different usage methods and weights of trolley case on body posture characteristics. Fifteen subjects pushed and pulled(Condition 1 and 2) the case with three load weights of 10 %, 20 % and 30 % of their own body weight with 0 % no load as baseline for both conditions. The basic gait parameters, kinematic and kinetic data were collected using the VICON infrared motion capture system and a 3D force platform. Two repeated measures factor (condition×weight) analysis of variance was used for statistical analysis of the gait temporal and spatial parameters, as well as trunk angle, kinetic ground reaction force, shoulder joint force, and trunk moment. Significant condition*weight interactions were detected in DLST (Double Limb Stance Time) (F=5.341，P = 0.006), GRF (Ground Reaction Force) in frontal plane (F=10.507, p < 0.001) and vertical plane (F=3.751, p = 0.021), shoulder joint force in sagittal plane (F=21.129, p < 0.001), and flexion-extension angle of the trunk in the sagittal plane (F=4.888, p < 0.010). Significant main effects were detected in walking speed (F=35.842, p < 0.001), right support time (F=12.156, p < 0.001), left swing time (F=8.506, p < 0.001), left support time (F=1.122, p < 0.001), right step length (F=33.900, p < 0.001), and left step length (F=14.960, p < 0.001) under different weights. A significant main effect was detected in sagittal GRF (F=11.77, p < 0.001), trunk rotation angle (F=4.124, p = 0.016), amplitude of COM (F=2.993, p = 0.046), under different weights. When the weight of the case exceeds 20 % of the body weight, from the perspective of energy efficiency, the push method is more advantageous than the pull method. When walking with luggage, people tend to maintain the stability of their trunk posture by adjusting the force on their arms more often. • To explore the effects of Trolley Case on body posture characteristics. • Adopt two methods and three kinds of weight control trolley. • VICON and three-dimensional dynamometer measure the basic parameters. • Changes in body posture parameters vary across different Trolley Case usage methods. • It is recommended to use the side push mode and 20 % body weight control trolley. [ABSTRACT FROM AUTHOR]

Perinatal running participation has increased recently; however, pregnancy related symptoms can limit activity. Perinatal running biomechanics could inform interventions to help perinatal individuals maintain an active lifestyle. Are perinatal running biomaechanics and muscle activation different compared to nulligravida females? Sixteen pregnant participants completed self-selected velocity running during second trimester (2 T), third trimester (3 T), and postpartum (PP) and 16 matched controls completed these procedures once in this case control study. Kinematic, kinetic, and electromyography (EMG) data were collected using a motion capture system, force plates, and EMG electrodes. Peak trunk, pelvis, hip, knee, and ankle kinematics and hip, knee, and ankle moments during stance phase, and average and peak erector spinae (ES), gluteus maximus (GMax), and gluteus medius (GMed) EMG amplitude and duration of activation during stance and swing phases were calculated. Independent t-tests were used to compare 2 T, 3 T, and PP to control participants (α < 0.05). Running velocity was slower during 3 T compared to control participants. At all pregnancy timepoints compared to the control group, peak trunk contralateral rotation was smaller. During 2 T and 3 T peak hip flexor moments were smaller. At 3 T pelvis contralateral rotation was smaller, ES average amplitude was greater during swing, GMax percent duration during stance and GMed percent duration during swing were smaller. At PP trunk flexion was smaller and knee abduction was greater (all p < 0.05). Decreased running velocity may help offset increased demand during pregnancy. During 3 T, greater ES activation, smaller trunk and pelvis motion, and altered gluteal activation could indicate trunk rigidity combined with modified hip stabilizer muscle utilization. During PP, the rigid trunk combined with greater knee abduction may indicate hip and trunk strength deficits. Altered trunk and hip motion and activation could be relevant to pathologies such as perinatal low back, pelvic girdle, or knee pain. • Decreased trunk rotation was observed during and after pregnancy with running. • Increased trunk activity and decreased gluteal muscle duration were observed during pregnancy. • During third trimester slower running may decrease joint and muscle demand. • Postpartum runners demonstrated an upright trunk and increased knee abduction. [ABSTRACT FROM AUTHOR]

Exploring the use of minimum marker sets is important for balancing the technical quality of motion capture with challenging data collection environments and protocols. While minimum marker sets have been demonstrated to be appropriate for evaluation of some motion patterns, there is limited evidence to support model choices for abrupt, asymmetrical, non-cyclic motion such as balance disturbance during a bathtub exit task. How effective are six models of reduced complexity for the estimation of centre of mass (COM) displacement and velocity, relative to a full-body model. Eight participants completed a bathtub exit task. Participants received a balance perturbation as they crossed the bathtub rim, stepping from a soapy wet bathtub to a dry floor. Six reduced models were developed from the full, 72-marker, 12 segment 3D kinematic data set. Peak displacement and velocity of the body COM, and RMSE (relative to the full-body model) for displacement and velocity of the body COM were determined for each model. Main effects were observed for peak right, left, anterior, posterior, upwards and downwards motion, and peak left, anterior, posterior, upwards and downwards velocity. Time-varying (RMSE) was smaller for models including the thighs than models not containing the thighs. In contrast, inclusion of upper arm, forearm, and hand segments did not improve model performance. The model containing the sacrum marker only consistently performed the worst across peak and RMSE metrics. Findings suggest a simplified centre of mass model may adequately capture abrupt, asymmetrical, non-cyclic tasks, such as balance disturbance recovery during obstacle crossing. A reduced kinematic model should include the thighs, trunk and pelvis segments, although models that are more complex are recommended, depending on the metrics of interest. • Participants were perturbed as they stepped from a soapy wet bathtub to a dry floor. • Six reduced models were compared against a 12-segment full-body model. • A simplified centre of mass model may capture abrupt, asymmetrical, non-cyclic tasks. • A reduced kinematic model should include the thighs, trunk and pelvis segments. [ABSTRACT FROM AUTHOR]

It has been suggested that sitting posture affects clavicular, scapular and spinal kinematics, however its effects in people with neck pain and scapular dysfunction remain unknown. The study aimed to determine the clavicular and scapular kinematics in different sitting postures in patients with neck pain and scapular dysfunction. Thirty-four participants with neck pain and scapular dysfunction were recruited into the study. Kinematics of the clavicle and scapula were recorded using motion analysis at rest and during arm elevation (at 30, 60, 90, and 120 degrees) in a slouched and upright sitting posture. Compared to the upright sitting posture, the slouched sitting posture had increased clavicular protraction and elevation as well as scapular internal rotation and anterior tilt at rest and during the arm raising and lowering phases (at 30, 60, 90, and 120 degrees) (p < 0.05). The slouched sitting also had increased scapular upward rotation in the lowering phase at all angles (p < 0.05). The slouched sitting posture has a significant influence on clavicular and scapular kinematics. Awareness of good sitting posture should be encouraged in patients with neck pain and scapular dysfunction. • Slouched sitting alters the clavicular and scapular orientations and movements. • Patients with neck pain tend to protract shoulder girdle in slouched sitting. • Side of neck pain has no influence on clavicular and scapular positions in sitting. [ABSTRACT FROM AUTHOR]

Longer distance water delivery culverts pose obstacles such as deposited silt, stones, and dead trees. In this paper, a crawling robot is designed to mimic the joint structure of a turtle using bionic design principles. The mechanism and gait of the robot are analyzed. The kinematics model of the robot is established using the D-H method and analytical approach, while the dynamics model is established using Lagrange's method. Based on kinematics and dynamics analysis theory, compound cycloid and cubic polynomial motion trajectories for the robot foot are planned along with a crawling gait resembling that of a turtle's abdomen. Simulation experiments and scale prototype experiments confirm that when gait parameters are identical, the energy consumption of compound cycloid trajectory exceeds that of cubic polynomial foot trajectory. When planning these two types of foot trajectories, it was observed that energy consumption ratio decreases with increasing step length but increases with increasing step height. [ABSTRACT FROM AUTHOR]

The thermodynamic non-equilibrium (TNE) effects and the relationships between various TNE effects and entropy production rate, morphology, kinematics, and dynamics during two initially static droplet coalescences are studied in detail via the discrete Boltzmann method. Temporal evolutions of the total TNE strength D ¯ * and the total entropy production rate can both provide concise, effective, and consistent physical criteria to distinguish different stages of droplet coalescence. Specifically, when the total TNE strength D ¯ * and the total entropy production rate reach their maxima, it corresponds to the time when the liquid–vapor interface length changes the fastest; when the total TNE strength D ¯ * and the total entropy production rate reach their valleys, it corresponds to the moment of the droplet being the longest elliptical shape. Throughout the merging process, the force contributed by surface tension in the coalescence direction acts as the primary driving force for droplet coalescence and reaches its maximum simultaneously with coalescent acceleration. In contrast, the force arising from non-organized momentum fluxes (NOMFs) in the coalescing direction inhibits the merging process and reaches its maximum at the same time as the total TNE strength D ¯ * . In the coalescence of two unequal-sized droplets, contrary to the larger droplet, the smaller droplet exhibits higher values for total TNE strength D ¯ * , merging velocity, driving force contributed by surface tension, and resistance contributed by the NOMFs. Moreover, these values gradually increase with the initial radius ratio of the large and small droplets due to the stronger non-equilibrium driving forces stemming from larger curvature. However, non-equilibrium components and forces related to shear velocity in the small droplet are consistently smaller than those in the larger droplet and diminish with the radius ratio. This study offers kinetic insights into the complexity of thermodynamic non-equilibrium effects during the process of droplet coalescence, advancing our comprehension of the underlying physical processes in both engineering applications and the natural world. [ABSTRACT FROM AUTHOR]

This study investigates the free-turning flight of butterflies (Idea leuconoe) and analyze the influence of body posture and asymmetric motions of left and right wings on aerodynamics and the asymmetric flow field structure. Three high-speed cameras were used in the biological experiment to observe the turning flight motions, and varied motion angles were calculated. The results showed that the body started to tilt to the right at 0.3 cycles and the flapping amplitude of the inner wing increased by 20.31% relative to the outer wing during a cycle. The outer wing showed a forward-then-backward deviation, whereas the inner wing exhibited the opposite trend. A three-dimensional numerical model with six degrees of freedom and prescribed motion functions was constructed to simulate the flight of butterflies. The results revealed that the roll angle was the primary factor influencing the direction of aerodynamic forces and had a similar mechanism as the banked turn of a fixed wing. During the downstroke, the outer wing provided the normal force while the inner wing contributed to the vertical force, and both wings generated horizontal thrust during the upstroke. The asymmetric wing motions and the lateral inflow velocity were the two major factors affecting the flow field structure. The difference in flapping amplitudes caused the inner wing to generate greater vertical-normal resultant force first. The asymmetric forewing-deviation angle and the lateral flow influenced the direction of the spanwise flow to enhance the strength of the leading-edge vortex and stabilize the attached flow for the outer wing. [ABSTRACT FROM AUTHOR]

Mosquitoes exhibit a distinctive and remarkable flight pattern, flapping their wings at a high frequency with relatively small stroke amplitude. However, until recently, the underlying aerodynamic mechanisms have remained unclear. Furthermore, there is a lack of understanding about their flight behaviors after blood-feeding and the corresponding aerodynamic characteristics. This study aims to explore this uncharted area, conducts experiments to acquire kinematic and morphological data and numerical simulations to obtain three-dimensional flow characteristic. Further analysis uncovers several key findings. Both before and after blood-feeding hovering exhibit a similar flapping wing pattern, characterized by downstroke and upstroke with three stages of each half stroke. After blood-feeding, there are significant increases in stroke amplitude, mid-downstroke duration, velocity, and flip angles. Additionally, body pitch, stroke plane tilt, and Reynolds number experience increments. In hovering, mosquitoes balance vertical force with weight, with substantial peaks observed in each stage, particularly during the mid-stroke. After blood-feeding, the vertical force experiences a 3.3-fold increase, with the majority of the increase occurring during the mid-downstroke. The study identifies three unsteady mechanisms for aerodynamic force generation without blood-feeding hovering, namely, added-mass force, delayed stall, and fast-pitching-up rotation. These mechanisms persist after blood-feeding, with a greater reliance on delayed stall to support increased weight. [ABSTRACT FROM AUTHOR]

The ability to estimate lower-extremity mechanics in real-world scenarios may untether biomechanics research from a laboratory environment. This is particularly important for military populations where outdoor ruck marches over variable terrain and the addition of external load are cited as leading causes of musculoskeletal injury As such, this study aimed to examine (1) the validity of a minimal IMU sensor system for quantifying lower-extremity kinematics during treadmill walking and running compared with optical motion capture (OMC) and (2) the sensitivity of this IMU system to kinematic changes induced by load, grade, or a combination of the two. The IMU system was able to estimate hip and knee range of motion (ROM) with moderate accuracy during walking but not running. However, SPM analyses revealed IMU and OMC kinematic waveforms were significantly different at most gait phases. The IMU system was capable of detecting kinematic differences in knee kinematic waveforms that occur with added load but was not sensitive to changes in grade that influence lower-extremity kinematics when measured with OMC. While IMUs may be able to identify hip and knee ROM during gait, they are not suitable for replicating lab-level kinematic waveforms. [ABSTRACT FROM AUTHOR]

Children aged 3–8 are in a critical period for motor development and postural control. Running is a basic motor skill that children need to master in early childhood. While running, children are prone to dangerous events such as falls. This study investigates the kinematic characteristics of running by children associated with different interference tasks, i.e., normalized running, cognitive dual-tasks, and obstacle crossing tasks, and provides a theoretical foundation for the interference mechanism of children's dynamic postural control and for screening of motor disorders. Two hundred children aged 3–8 were recruited. The BTS Bioengineering infrared motion capture system was used to collect spatiotemporal and kinematic running data under three tasks. Repeated measures of variance analysis were used to compare the effects of different interference tasks and ages on children's running signs. The main and interaction effect tests were compared by the Bonferroni method. The results and conclusions are as follows: (1) Running characteristics of early childhood are influenced by interference tasks and age. With interference tasks, the overall characteristics of running by children aged 3–8 showed an increasing trend in running cycle time and a decreasing trend in stride length, step length, cadence, and speed. (2) Both cognitive and obstacle crossing tasks had costs, and cognitive task costs were greater than obstacle crossing costs. Children adopted a "task first" running strategy with different interference tasks. When facing cognitive tasks, their overall joint motion decreased, and they reduced joint motions to promote task completion. When facing obstacle crossing tasks, because of the characteristics of the task itself, children increased joint motions to cope with interference. (3) In terms of age, the running characteristics showed a nonlinear development trend in various indicators, with a degree of recurrence and high variability in adjacent age groups. (4) The dual-task interference paradigm of "postural-cognition" can be used as a motor intervention tool to promote the development of basic motor skills in early childhood. [ABSTRACT FROM AUTHOR]

In women, the laxity of the plantar fascia increases during the ovulation phase of the menstrual cycle. Although it is possible that this increased laxity results in a decreased height of the foot in the medial longitudinal arch and exacerbates symptoms of several overuse injuries of the lower extremity, the influence of the menstrual cycle on static and dynamic kinematics of the medial longitudinal arch is unclear. The purpose of this study was to confirm that the medial longitudinal arch height during static standing, gait, and landing decrease during the menstrual cycle ovulation phase. Participants in this study were 16 female college students with normal menstrual cycles and 16 male college students. Navicular height in the static standing position was measured using a three-dimensional foot scanner. Kinematics of the medial longitudinal arch during gait and landing were measured using a three-dimensional motion capture system to determine the navicular height at initial contact, minimal navicular height, and dynamic navicular drop. In all measurements, female participants were tested twice during the course of one complete menstrual cycle: once during the follicular phase and once during the ovulation phase. Male participants were tested twice with an interval of ≥1 week and <2 weeks. In women, navicular height in the static standing position significantly decreased during the ovulation phase compared with follicular phase (mean difference [95% confidence interval] = 2.1 [0.9–3.4] mm; p = 0.002), whereas men showed no statistical difference between the first and second measurements. In both men and women, no statistical differences were identified for the dynamic medial longitudinal arch kinematics measured during gait and landing. Navicular height in the static standing position slightly decreased during the ovulation phase. [ABSTRACT FROM AUTHOR]

Background: In young patients with irreparable subscapularis deficiency (SSC-D) and absence of severe osteoarthritis, anterior latissimus dorsi transfer (aLDT) has been proposed as a treatment option to restore the anteroposterior muscular force couple to regain sufficient shoulder function. However, evidence regarding the biomechanical effect of an aLDT on glenohumeral kinematics remains sparse. Purpose/Hypothesis: The purpose of this study was to investigate the effects of an aLDT on range of glenohumeral abduction motion, superior migration of the humeral head (SM), and cumulative deltoid force (cDF) in a simulated SSC-D model using a dynamic shoulder model. It was hypothesized that an aLDT would restore native shoulder kinematics by reestablishing the insufficient anteroposterior force couple. Study Design: Controlled laboratory study. Methods: Eight fresh-frozen cadaveric shoulders were tested using a validated shoulder simulator. Glenohumeral abduction angle (gAA), SM, and cDF were compared across 3 conditions: (1) native, (2) SSC-D, and (3) aLDT. gAA and SM were measured using 3-dimensional motion tracking, while cDF was recorded in real time during dynamic abduction motion by load cells connected to actuators. Results: The SSC-D significantly decreased gAA (Δ–9.8°; 95% CI, –14.1° to −5.5°; P <.001) and showed a significant increase in SM (Δ2.0 mm; 95% CI, 0.9 to 3.1 mm; P =.003), while cDF was similar (Δ7.8 N; 95% CI, –9.2 to 24.7 N; P =.586) when compared with the native state. Performing an aLDT resulted in a significantly increased gAA (Δ3.8°; 95% CI, 1.8° to 5.7°; P <.001), while cDF (Δ–36.1 N; 95% CI, –48.7 to −23.7 N; P <.001) was significantly reduced compared with the SSC-D. For the aLDT, no anterior subluxation was observed. However, the aLDT was not able to restore native gAA (Δ–6.1°; 95% CI, –8.9° to −3.2°; P <.001). Conclusion: In this cadaveric study, performing an aLDT for an irreparable subscapularis insufficiency restored the anteroposterior force couple and prevented superior and anterior humeral head migration, thus improving glenohumeral kinematics. Furthermore, compensatory deltoid forces were reduced by performing an aLDT. Clinical Relevance: Given the favorable effect of the aLDT on shoulder kinematics in this dynamic shoulder model, performing an aLDT may be considered as a treatment option in patients with irreparable SSC-D. [ABSTRACT FROM AUTHOR]

Just as vocalization proceeds in a continuous stream in speech, so too do movements of the hands, face, and body in sign languages. Here, we use motion-capture technology to distinguish lexical signs in sign language from other common types of expression in the signing stream. One type of expression is constructed action, the enactment of (aspects of) referents and events by (parts of) the body. Another is classifier constructions, the manual representation of analogue and gradient motions and locations simultaneously with specified referent morphemes. The term signing is commonly used for all of these, but we show that not all visual signals in sign languages are of the same type. In this study of Israeli Sign Language, we use motion capture to show that the motion of lexical signs differs significantly along several kinematic parameters from that of the two other modes of expression: constructed action and the classifier forms. In so doing, we show how motion-capture technology can help to define the universal linguistic category "word," and to distinguish it from the expressive gestural elements that are commonly found across sign languages. [ABSTRACT FROM AUTHOR]

Glossolalia can be regarded as an instance of speech production in which practitioners produce syllables in seemingly random sequences. However, a closer inspection of glossalalia's statistical properties reveals that sequences show a Zipfian pattern similar to natural languages, with some syllables being more probable than others. It is well established that statistical properties of sequences are implicitly learned, and that these statistical properties correlate with changes in kinematic and speech behavior. For speech, this means that more predictable items are phonetically shorter. Accordingly, we hypothesized for glossolalia that if practitioners have learned a serial pattern in glossolalia in the same manner as in natural languages, its statistical properties should correlate with its phonetic characteristics. Our hypothesis was supported. We find significantly shorter syllables associated with higher syllable probabilities in glossolalia. We discuss this finding in relation to theories about the sources of probability-related changes in the speech signal. [ABSTRACT FROM AUTHOR]

Self-propelled oscillating foils provide an effective model system to explore the intricacies of oscillatory and undulatory bio-locomotion, particularly the coupled thrust and drag mechanism that enable self-propulsion. Here, we explain the design, construction, and working of an experimental apparatus that can achieve self-propulsion. Our apparatus utilizes a long, freely rotating arm pivoted on one end and houses the airfoil on the other. The novelty of the apparatus is a spiral-spring-based crank rocker mechanism employed to provide the necessary sinusoidal actuation to the airfoil. We discuss the kinematics of a four-bar crank-rocker mechanism and identify the conditions under which the rocker motion can be approximated as sinusoidal. We describe the mechanism's design and construction with these kinematic constraints, test it under various loading conditions, and observe that it can produce sinusoidal actuation up to 20°. As a characterization, we use the apparatus to record the self-propulsion speed in two airfoil models – rigid (NACA0015) and hybrid (NACA0015 with flexible flap). Our results demonstrate high repeatability and less than a 2% error in all cases. The apparatus can attain self-propelling speeds ranging from 1 cm/s to almost 45 cm/s. Additionally, we explore potential applications for the mechanism, such as in large robotic fishes. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the utility and applicability of electrooculography (EOG) when studying ocular activity during complex motor behavior. Due to its lower spatial resolution relative to eye tracking (ET), it is unclear whether EOG can provide valid and accurate temporal measurements such as the duration of the Quiet Eye (QE), that is the uninterrupted dwell time on the visual target prior to and during action. However, because of its greater temporal resolution, EOG is better suited for temporal‐spectral decomposition, a technique that allows us to distinguish between lower and higher frequency activity as a function of time. Sixteen golfers of varying expertise (novices to experts) putted 60 balls to a 4‐m distant target on a flat surface while we recorded EOG, ET, performance accuracy, and putter kinematics. Correlational and discrepancy analyses confirmed that EOG yielded valid and accurate QE measurements, but only when using certain processing parameters. Nested cross‐validation indicated that, among a set of ET and EOG temporal and spectral oculomotor features, EOG power was the most useful when predicting performance accuracy through robust regression. Follow‐up cross‐validation and correlational analyses revealed that more accurate performance was preceded by diminished lower‐frequency activity immediately before movement initiation and elevated higher‐frequency activity during movement recorded from the horizontal channel. This higher‐frequency activity was also found to accompany a smoother movement execution. This study validates EOG algorithms (code provided) for measuring temporal parameters and presents a novel approach to extracting temporal and spectral oculomotor features during complex motor behavior. This study validates electrooculography for computing temporal indices of oculomotor activity typically obtained through mobile eye tracking. It also indicates that using EOG indices that embed both temporal and spectral features can improve predictions of movement accuracy compared to those that rely on temporal features only. [ABSTRACT FROM AUTHOR]

Purpose: Performance is the benchmark to assess the level of an athlete: in this respect, a more precise qualitative and quantitative evaluation of the performance represents an important target to be achieved. Methods: The work presents a possible method, based on the biomechanical evaluation of the motor exercise with an optoelectronic system, to characterise single or multiple repetitions of pull-ups of 12 athletes of sport climbing and sportive healthy subjects, monitoring and scoring the performance and the safety of the executions. The analysis includes the time courses of the segmental kinematics and some newly developed synthetic indices in the form of performance and safety scores. Results: The time courses make it possible to analyse the linear and angular kinematics district-by-district and have a direct overview of the ranges of motion, the patterns of task execution, together with the possible strategies adopted to complete the exercise in terms of compensations. The proposed characterisation provides a condensed summary of the global execution quality and offers the possibility to identify which single biomechanical parameters are modified. Conclusion: The method is intended as a practical tool to enrich the training schedule in terms of the qualitative and quantitative evaluation of the performances and to increase the self-awareness while training. [ABSTRACT FROM AUTHOR]

Purpose: Exercise intensity during walking can be increased by attaching an external load or accelerating the walking speed. However, the combination of these effects on the human body remains unclear. To investigate the influence of different walking speeds and ankle weight loads on metabolic and neuromuscular responses and lower limb kinematics during walking. Methods: Twelve healthy participants walked on a treadmill under eight conditions (speed: 4 and 7 km/h × ankle weight loads: 0, 2, 4, and 6 kg). We recorded V ˙ O 2 , heart rate (HR), lower limb neuromuscular activities, and kinematic data. Results: The interaction effect of speed and ankle weight load on V ˙ O 2 and HR was significant (p < 0.05). V ˙ O 2 and HR were higher during walking at 7 than 4 km/h (p < 0.05). V ˙ O 2 rapidly rose with an increase in ankle weight loading from 4 to 6 kg during walking at 7 km/h compared with that at 4 km/h (p < 0.05). Rectus femoris proximal activity with 6 kg ankle weight loading was higher than that under the no-loading condition during walking at 7 km/h (p < 0.05). During walking at 4 km/h, medial gastrocnemius muscle activity with 4- and 6 kg ankle weight loading was significantly higher than under the no-loading condition (p < 0.05). All targeted lower limb muscle activity and the maximum hip flexion angle were greater during walking at 7 than 4 km/h. Conclusion: Our results suggest that the effect of ankle weight loading on metabolic and neuromuscular responses is potentiated by a faster walking speed. [ABSTRACT FROM AUTHOR]

Purpose: Increasing access to marker-less technology has enabled practitioners to obtain kinematic data more quickly. However, the validation of many of these methods is lacking. Therefore, the validity of pre-trained neural networks was explored in this study compared to reflective marker tracking from sagittal plane cycling motion. Methods: Twenty-six cyclists were assessed during stationary cycling at self-selected cadence and moderate intensity exercise. Standard video from their sagittal plane was obtained to extract joint kinematics. Hip, knee, and ankle angles were calculated from marker digitisation and from two deep learning-based approaches (TransPose and MediaPipe). Results: Typical errors ranged between 1 and 10° for TransPose and 3–9° for MediaPipe. Correlations between joint angles calculated from TransPose and marker digitalization were stronger (0.47–0.98) than those from MediaPipe (0.25–0.96). Conclusion: TransPose seemed to perform better than MediaPipe but both methods presented poor performance when tracking the foot and ankle. This seems to be associated with the low frame rate and image resolution when using standard video mode. [ABSTRACT FROM AUTHOR]

This systematic review aimed to investigate the effect of focal vibration (FV) on muscle tone, kinematic parameters and motor functions in individuals with stroke, Parkinson' disease and multiple sclerosis. It also determined the influence of vibration parameters such as frequency and amplitude, stimulation session duration, and the total number of intervention sessions on the outcome measures. PubMed, Scopus, Cochrane, Web of Science, and EBSCO were searched, yielding 21 qualifying articles. Within a week post-treatment, FV effectively reduced elbow spasticity (P = 0.04), improved upper limb kinematic parameters (SMD = -0.75, 95% CI: -1.50 to -0.01), and enhanced upper limb motor function (P = 0.05) in stroke patients. FV significantly improved lower limb kinematic parameters of Parkinson's disease patients (P = 0.03). Over a week post-treatment, the effect of FV was not significant in reducing spasticity for upper limb in stroke (P = 0.25) and improving kinematic parameters for lower limb in Parkinson's disease (SMD = 0.38, 95% CI: -0.58 to 1.35). The total therapy sessions significantly associated with the effect size (p = 0.042) for upper limb motor function outcome measure. Conclusion, integrating FV into rehabilitation may benefit patients with neurological disorders such as stroke, Parkinson's disease, and multiple sclerosis. [ABSTRACT FROM AUTHOR]

Differences in running biomechanics have been reported in adult long-distance runners when running in motion control or neutral shoes. The influence of growth and coordination refinement during puberty limits the generalisability of adult research to adolescents and it is unknown if biomechanics differ between adolescent who run in different types of shoes. The purpose of our study was to compare lower extremity kinematics and ground reaction forces between adolescents running in motion control or neutral shoes. We matched 18 adolescent long-distance runners who ran in motion control shoes with 18 adolescent long-distance runners who ran in neutral shoes according to running speed, sex, and physical maturation. We collected three-dimensional kinematic and ground reaction force data during overground running and performed statistical parametric mapping to compare joint angle and ground reaction force waveforms between the motion control and neutral shoe groups. We found no significant differences for hip, knee, or ankle joint angles (average differences <2°) or ground reaction forces (average differences <0.05 N/kg) between runners who ran in motion control or neutral shoes. Lower extremity kinematics and ground reaction forces were similar between adolescents who ran in motion control or neutral shoes. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to evaluate patellar tendon loading profiles (loading index, based on loading peak, loading impulse, and loading rate) of rehabilitation exercises to develop clinical guidelines to incrementally increase the rate and magnitude of patellar tendon loading during rehabilitation. Methods: Twenty healthy adults (10 females/10 males, 25.9 ± 5.7 yr) performed 35 rehabilitation exercises, including different variations of squats, lunge, jumps, hops, landings, running, and sports specific tasks. Kinematic and kinetic data were collected, and a patellar tendon loading index was determined for each exercise using a weighted sum of loading peak, loading rate, and cumulative loading impulse. Then the exercises were ranked, according to the loading index, into tier 1 (loading index ≤0.33), tier 2 (0.33 < loading index <0.66), and tier 3 (loading index ≥0.66). Results: The single-leg decline squat showed the highest loading index (0.747). Other tier 3 exercises included single-leg forward hop (0.666), single-leg countermovement jump (0.711), and running cut (0.725). The Spanish squat was categorized as a tier 2 exercise (0.563), as was running (0.612), double-leg countermovement jump (0.610), single-leg drop vertical jump (0.599), single-leg full squat (0.580), double-leg drop vertical jump (0.563), lunge (0.471), double-leg full squat (0.428), single-leg 60° squat (0.411), and Bulgarian squat (0.406). Tier 1 exercises included 20 cm step up (0.187), 20 cm step down (0.288), 30 cm step up (0.321), and double-leg 60° squat (0.224). Conclusions: Three patellar tendon loading tiers were established based on a combination of loading peak, loading impulse, and loading rate. Clinicians may use these loading tiers as a guide to progressively increase patellar tendon loading during the rehabilitation of patients with patellar tendon disorders and after anterior cruciate ligament reconstruction using the bone–patellar tendon–bone graft. [ABSTRACT FROM AUTHOR]

Aberrant gait biomechanics in individuals with anterior cruciate ligament reconstruction (ACLR) are linked to posttraumatic osteoarthritis (PTOA) development, indicating a need to normalize gait biomechanics to prevent PTOA. Anterior cruciate ligament reconstruction individuals walk slower than uninjured controls and slower speeds are associated with aberrant gait biomechanics. Yet, it is unclear if increasing walking speed normalizes gait biomechanics post-ACLR. Purpose: To determine the effect of acutely increasing walking speed on gait biomechanics in ACLR individuals compared with their habitual speed and uninjured matched-controls. Methods: Gait biomechanics were collected on 30 ACLR individuals (20 females; age, 22.0 ± 4.2 yr; body mass index, 24.0 ± 3.0 kg·m−2) at their habitual speed and at 1.3 m·s−1, a speed similar to controls, and 30 uninjured matched-controls (age: 21.9 ± 3.8, body mass index: 23.6 ± 2.5) at their habitual speed. Functional waveform analyses compared biomechanics between: i) walking at habitual speed vs 1.3 m·s−1 in ACLR individuals; and ii) ACLR individuals at 1.3 m·s−1 vs controls. Results: In the ACLR group, there were no statistically significant biomechanical differences between walking at habitual speed (1.18 ± 0.12 m·s−1) and 1.3 m·s−1 (1.29 ± 0.05 m·s−1). Compared with controls (habitual speed: 1.34 ± 0.12 m·s−1), the ACLR group while walking at 1.3 m·s−1 exhibited smaller vertical ground reaction force (vGRF) during early and late stance (13–28, 78–90% stance phase), greater midstance vGRF (47–61%), smaller early-to-midstance knee flexion angle (KFA; 1–44%), greater mid-to-late stance KFA (68–73, 96–101%), greater internal knee abduction moment (69–101%), and smaller internal knee extension moment (4–51, 88–96%). Conclusions: Increasing walking speed to a speed similar to uninjured controls did not elicit significant changes to gait biomechanics, and ACLR individuals continued to demonstrate biomechanical profiles that are associated with PTOA development and differ from controls. [ABSTRACT FROM AUTHOR]

Objective: The aim of the study is to assess the effects of leg length discrepancy on paraspinal muscle activity and kinematic variables during gait. Design: Thirty-nine healthy participants aged 5–12 yrs performed the 10-m walk test using the surface electromyography and G-walk sensor for the following conditions: (1) non–leg length discrepancy condition (leg length discrepancy 0 cm) and (2) leg length discrepancy condition with an insole on the right leg at three different heights (leg length discrepancy 0.5 cm, 1.0 cm, and 1.5 cm). The root mean square was normalized using maximal voluntary contraction and reference voluntary contraction methods (RMS_MVC and RMS_ref) and compared between the sides. Results: The mean RMS_MVC of the 12th thoracic erector spinae on the right side was significantly higher at a leg length discrepancy 0.5 cm and 1 cm. Regarding the 3rd lumbar multifidus, the mean RMS_MVC on the right side was significantly higher at a leg length discrepancy 1.5 cm. The mean RMS_ref exhibited similar patterns. Pelvic obliquity and rotation showed asymmetry at a leg length discrepancy 1.5 cm compared with a leg length discrepancy 0 cm. Conclusions: A small leg length discrepancy significantly affected the asymmetric hyperactivation of the 3rd lumbar multifidus and 12th thoracic erector spinae muscles during gait. Considering the action of these muscles, asymmetric hyperactivation might result in rotation and bending of the lumbar spine and the bending of the thoracolumbar spine. [ABSTRACT FROM AUTHOR]

Waves and wave breaking are important to many deep and shallow water processes. We describe the wavedrifter, an in situ water-following inertial measurement unit (IMU)-based drifter that measures wave steepening and overturning kinematics, and the subsequent transition to turbulence. The wavedrifter has 5 cm diameter, 77 g mass, and 0.84 saltwater specific gravity. GPS provides time synchronization. MATLAB's Attitude, Heading, Reference System (AHRS) library provides wavedrifter orientation. Laboratory experiments quantify the wavedrifter vertical oscillation mode, water following properties, and ability to reproduce wave spectra for small, $f = 1.5$ f = 1.5 Hz waves. The wavedrifter observed wave overturning and the transition to turbulence at the Surf Ranch wave basin. Synchronized video observations provide context. The upper-back of the overturn had large ($ \approx 4g$ ≈ 4 g) accelerations and $14g$ 14 g acceleration magnitude occurs with the impact of the overturning jet. Trajectories reveal the Lagrangian structure of the overturn and subsurface vortex. Although it has limitations, the wavedrifter is a powerful in situ tool to probe wave processes. [ABSTRACT FROM AUTHOR]

The computation of master integrals from their differential equations requires boundary values to be supplied by an independent method. These boundary values are often desired at singular kinematical points. We demonstrate how the auxiliary mass flow technique can be extended to compute the expansion coefficients of master integrals in a singular limit in an analytical manner, thereby providing these boundary conditions. To illustrate the application of the method, we re-compute the phase space integrals relevant to initial-final antenna functions at NNLO, now including higher-order terms in their ϵ-expansion in view of their application in third-order QCD corrections. [ABSTRACT FROM AUTHOR]

In this work, we present a complete theoretical framework for analyzing the distribution of polarized hadrons within jets, with and without measuring the transverse momentum relative to the standard jet axis. Using soft-collinear effective theory (SCET), we derive the factorization and provide the theoretical calculation of both semi-inclusive and exclusive fragmenting jet functions (FJFs) under longitudinal and transverse polarization. With the polarized FJFs, one gains access to a variety of new observables that can be used for extracting both collinear and transverse momentum dependent parton distribution functions (PDFs) and fragmentation functions (FFs). As examples, we provide numerical results for the spin asymmetry A TU , T cos ϕ S − ϕ ̂ S h from polarized semi-inclusive hadron-in-jet production in polarized pp collisions at RHIC kinematics, where a transversely polarized quark would lead to the transverse spin of the final-state hadron inside the jet and is thus sensitive to the transversity fragmentation functions. Similarly, another spin asymmetry, A TU , L cos ϕ q − ϕ S from polarized exclusive hadron-in-jet production in polarized ep collisions at EIC kinematics would allow us to access the helicity fragmentation functions. These observables demonstrate promising potential in investigating transverse momentum dependent PDFs and FFs and are worthwhile for further measurements. [ABSTRACT FROM AUTHOR]

Maximal sprinting in humans requires the contribution of various muscle–tendon units (MTUs) and joints to maximize performance. The plantar flexor MTU and ankle joint are of particular importance due to their role in applying force to the ground. This narrative review examines the contribution of the ankle joint and plantar flexor MTUs across the phases of sprinting (start, acceleration, and maximum velocity), alongside the musculotendinous properties that contribute to improved plantar flexor MTU performance. For the sprint start, the rear leg ankle joint appears to be a particularly important contributor to sprint start performance, alongside the stretch–shortening cycle (SSC) action of the plantar flexor MTU. Comparing elite and sub-elite sprinters revealed that elite sprinters had a higher rate of force development (RFD) and normalized average horizontal block power, which was transferred via the ankle joint to the block. For the acceleration phase, the ankle joint and plantar flexor MTU appear to be the most critical of the major lower limb joints/MTUs. The contribution of the ankle joint to power generation and positive work is minimal during the first stance, but an increased contribution is observed during the second stance, mid-acceleration, and late-acceleration. In terms of muscular contributions, the gastrocnemius and soleus have distinct roles. The soleus acts mainly as a supporter, generating large portions of the upward impulse, whereas the gastrocnemius acts as both an accelerator and a supporter, contributing significantly to propulsive and upward impulses. During maximum velocity sprinting the ankle joint is a net dissipater of energy, potentially due to the greater vertical loading placed on the plantar flexors. However, the ankle joint is critical for energy transfer from proximal joints to ground force application to maintain velocity. In terms of the contribution of musculoskeletal factors to ankle joint and plantar flexor performance, an optimal plantar flexor MTU profile potentially exists, which is possibly a combination of several musculoskeletal factors, alongside factors such as footwear and technique. [ABSTRACT FROM AUTHOR]