Search

Chronic respiratory symptoms are a health concern in the paper industry. This study evaluates the association between personal inhalable paper dust exposure and chronic respiratory symptoms among workers in this industry. In total, 270 workers from the paper industry and 267 from a water bottling factory participated. Chronic respiratory symptoms were assessed using a standardized questionnaire, modified from the American Thoracic Society. A job exposure matrix, based on cross-sectional personal measurements of inhalable paper dust, was used to estimate the exposure-response relationship between cumulative dust exposure and chronic respiratory symptoms. There was a higher prevalence of chronic coughs (27.4% vs. 7.5%), breathlessness (25.6% vs. 11%), coughs with sputum (21.1% vs. 1.1%), and wheezing (25.6% vs. 5%) among paper workers compared to those in the water bottling industry. A Poisson regression analysis revealed that the prevalence ratios for chronic coughs (APR = 3.3 and 95% CI: 2.0-5.4), breathlessness (APR = 2.2 and 95% CI: 1.4-3.4), and wheezing (APR = 4.3 and 95% CI: 2.3-7.7) were significantly higher in paper workers than in water bottling workers. Among paper workers, a significant exposure-response relationship was observed between cumulative dust exposure and chronic coughs after adjusting for age, sex, history of respiratory illnesses, work in other dusty industries, and use of biofuels. As there were only four ever-smokers, smoking was not included in the regression analysis. The results show a significant association between dust exposure and coughing, highlighting the need for control measures to prevent the development of respiratory symptoms among workers.

Electrochemical analysis of glucose monitoring without painful blood collection provides a new noninvasive route for monitoring glucose levels. Thus, in this study, biobased cellulosic papers (methylated and phosphorylated one) based glucose monitoring sensor is developed. To achieve high hydrophilicity, microfibrillated cellulose (MFC) were functionalized using hexokinase mediated phosphorylation (-OH to -[Formula: see text]). The instinctive increased surface charge density from 36.2 ± 3.4 to 118.4 ± 1.2 µmol/g and decrease contact angle (45°-22°) confirms the increased hydrophilicity of paper. Furthermore, functionalized phos-MFC paper increase the capillary flow of sweat, required low quantity (1 µl) of sweat for accurate analysis of glucose level. Additionally, chemically induced methyl groups (-CH 3 ) make the sensor more barrier to other chemicals. In addition, a multilayer patch design combined with sensor miniaturization was used to lead to an increase in the efficiency of the sweat collection and sensing processes. Besides, this paper sensor integrated with artificial transdermal drug delivery unit (agarose gel as skin) for monitoring glucose levels in sweat. The patch monitoring system increase the accuracy of sensing with fluctuation in sweat vol. (1-4 µl), temperature (20-70 °C), and pH (4.0-7.0). In addition, temperature dependency artificial transdermal delivery (within agarose gel) of drug metformin agrees the measurement accuracy of sensor, called "switch system" without any error. As a result, the reported MFC paper based multi-patch disposable sensing system provides a novel closed-loop solution for the noninvasive sweat-based management of diabetes mellitus., (© 2024. The Author(s).)

The ability to detect newly emerging substances is of great importance in reducing harms for people who use drugs. New psychoactive substances including novel benzodiazepines in the illicit drug supply have been linked to high rates of overdose deaths while complicating drug checking as an overdose prevention strategy. Paper-spray mass spectrometry (PS-MS) has emerged as a novel strategy to rapidly detect trace components in street drug samples. While targeted, low-resolution PS-MS methods have proven effective, newly emerging substances are often missed. To address this, a method was applied to low-resolution full-scan PS-MS data to aid in the early detection and identification of novel benzodiazepines in the unregulated drug supply. Using the developed method, true positives rates of 0.89 and 0.75 were achieved for bromazolam and etizolam in street samples obtained in a community drug checking service. The applicability of the method was further demonstrated for a novel benzodiazepine, desalkylgidazepam, that has recently emerged in the illicit drug supply., (© 2023 The Authors. Drug Testing and Analysis published by John Wiley & Sons Ltd.)

The Home Literacy model predicts different outcomes depending on formal and informal literacy practices carried out at home. However, this model does not explicitly consider the potential differences that the media (paper vs. tablets) in which these practices are carried out can have on performance. The present study explored this issue. Participants were 136 children aged 6-7 years old and their parents. The different activities performed at home were analysed through reports of the parents, and children were assessed at school for their reading performance (decoding and comprehension). Results showed how formal practices using traditional materials predicted reading comprehension, but informal practices did not predict any performance measure. The digital home literacy environment showed no impact on reading performance, suggesting that two different environments (paper and digital) might exist, each one of them having differential impacts on performance. Implications for research and education are discussed.

In response to growing environmental concerns, the scientific community is increasingly incorporating green chemistry principles into modern analytical techniques. Electrochemical paper-based analytical devices (ePADs) have emerged as a sustainable and efficient alternative to conventional analytical devices, offering robust applications in point-of-care testing, personalized healthcare, environmental monitoring, and food safety. ePADs align with green chemistry by minimizing reagent use, reducing energy consumption, and being disposable, making them ideal for eco-friendly and cost-effective analyses. Their user-friendly interface, alongside sensitive and selective detection capabilities, has driven their popularity in recent years. This review traces the evolution of ePADs from simple designs to complex multilayered structures that optimize analyte flow and improve detection. It also delves into innovative electrode fabrication methods, assessing key advantages, limitations, and modification strategies for enhanced sensitivity. Application-focused sections explore recent advancements in using ePADs for detecting diseases, monitoring environmental hazards like heavy metals and bacterial contamination, and screening contaminants in food. The integration of cutting-edge technologies, such as wearable wireless devices and the Internet of Things (IoT), further positions ePADs at the forefront of point-of-care testing (POCT). Finally, the review identifies key research gaps and proposes future directions for the field.

Background: The microfluidic paper-based analytical devices (μPADs) have been highly regarded as effective tools that offer a cost-effective and portable solution for point-of-care testing (POCT) and on-site detection. Utilizing paper substrates such as cellulose and nitrocellulose membranes, μPADs have proven beneficial for a range of applications from medical diagnostics to environmental monitoring. Despite their advantages, the fabrication of μPADs often requires sophisticated techniques and equipment, posing challenges for widespread adoption, especially in resource-limited settings. This study addresses the need for a simplified, low-cost method for fabricating μPADs that is accessible without specialized training or equipment., Results: This research introduces a novel, efficient method for producing μPADs using 3D-printed slidable chambers and super glue vapor, bypassing traditional, more complex fabrication processes. The method utilizes super glue (ethyl-cyanoacrylate) vapor to create hydrophobic barriers on paper substrates. By optimizing the exposure sequence to super glue and water vapors and the heating conditions, we achieved rapid hydrophobization within 5 min, creating effective hydrophobic barriers and hydrophilic channels on paper substrates. The technique's simplicity allows for use by individuals without specialized training. The practical application of the fabrication method is demonstrated by the fabrication of μPADs that can detect multiple target analytes. We perform the simultaneous detection of glucose, proteins, and also the simultaneous detection of heavy metal ions nickel (Ni 2+ ) and copper (Cu 2+ ), highlighting its potential for broad applications in point-of-care diagnostics., Significance: This study is the first to report a method for selective exposure of ethyl-cyanoacrylate vapor for the fabrication of μPADs. This method significantly reduces the complexity, time, and fabrication cost, making it feasible for use in various settings. It also eliminates the need for specialized equipment and can be executed by individuals without specialized training. We believe that the proposed fabrication method contributes to the wider adoption and deployment of μPADs across various sectors., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Joong Ho Shin reports financial support was provided by National Research Foundation of Korea. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

A paper-based colorimetric sensor array mediated by a novel nanozyme (CuCo 2 O 4 ) was developed using a screen-printing technology. The aim was to facilitate the identification of different kinds of alkaloids. Typically, three chromogenic substrates (3,3',5,5'-tetramethylbenzidine, 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid), and o-phenylenediamine) were selected as sensing elements, which can be catalyzed by a CuCo 2 O 4 nanozyme with peroxidase-like activity to yield corresponding oxidized products, thereby inducing color changes. Owing to the varying inhibitory ability of different alkaloids on acetylcholinesterase (AChE), a decrease in choline (Ch) concentration occurs and subsequently results in the restoration of color within the units of sensor array. Color data can be transformed into hue information with a smartphone. The above color variations generated a unique "fingerprint" pattern on five alkaloids (berberine, palmatine, jatrorrhizine, eserine, and harmane), which can be successfully discriminated through linear discriminant analysis in the range 0.2 to 20 µM. Furthermore, the sensor arrays allowed successful discrimination of the above five alkaloids in Chinese herbal medicine samples and recognition of 22 blind samples. This work presents a novel nanozyme-based paper sensor array, which is a user-friendly and reliable platform for probing different alkaloids. In addition, the developed sensing strategy enables the identification of AChE-related diseases, positively contributing to the screening available of AD-associated drugs., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

A synergistic photocatalytic system based on Fe-based perovskite with persulfate was constructed for alkali lignin (AL) degradation in pulp and paper wastewater. The degradation performance and mechanism on AL were carried out under ambient temperature and pressure, accompanied by visible light irradiation. The results showed that the synergistic photocatalytic system exhibited much better performance on AL degradation than the single catalytic system. The degradation efficiency reached 73.5% under the optimal conditions and was constant at around 65% over the pH range from 2 to 8. A significant escalation of the AL degradation was observed at pH 10, reaching 80.1%. The photogenerated holes, 1 O 2 and SO 4 - ·, generated by the system were involved in the degradation, and the holes played a dominant role. During the degradation process, the efficient promotion of cleavage events in lignin methoxy, β-O-4 bond, and benzene ring was observed. Consequently, the depolymerization process led to the generation of high-value compounds, namely p-hydroxybenzaldehyde and vanillin. Remarkably, the yields of the high-value compounds in the synergistic photocatalytic system were five times larger than those in the control. This study offered a viable method to activate persulfate for alkali lignin degradation and to achieve a mutually beneficial strategy for wastewater treatment and recycling., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

In this work, shellac and its crosslinking were studied to produce paper straws for the application of liquid products. Commercial paper straws are not durable for liquid foods due to their hygroscopic nature, and thus, they find it challenging to replace single-use plastics. Shellac is a naturally occurring resin utilized as an adhesive and water-resistant coating over the paper straw. Shellac was cured at 125 °C, 150 °C, 175 °C, and 200 °C, and it was crosslinked in about 210 min, 150 min, 60 min, and 30 min respectively and studied for kinetics. The crosslinking of shellac produced a thermally stable material. Compared to commercial paper straws, these paper shellac straws exhibited high bending stiffness (1356.11 Nmm), tensile strength (13,74 MPa), flexural strength (21.72 MPa), and compression strength (24.99 MPa). Moreover, the paper shellac straws didn't bend in wet conditions under load for up to one day, while the commercial paper straw bends in 8 min. Therefore, paper straws with shellac can replace plastic-based straws for a sustainable future., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Arihant Ahuja reports financial support was provided by the Prime Minister Research Fellowship, Ministry of Education, India. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Adsorbents play a significant role in enhancing the analytical sensitivity of target analytes in complex samples by mitigating matrix effects. In our recent report, ZnO stood out among various adsorbents to determine target therapeutic drugs in complex biological matrices when applied for portable paper-based electrospray ionization mass spectrometry (PPESI-MS). However, the influence of the morphology of ZnO on the performance of PPESI-MS is elusive. Herein, different morphologies of ZnO particles were prepared via co-precipitation or ultrasonic methods, and their capability to determine different therapeutic drugs in serum were systemically investigated. The results demonstrated that flower-shaped ZnO gave a superior capacity, and its analysis sensitivity was 2.9-12.8-fold higher than those achieved with other ZnO morphologies. Further characterization revealed that the unique performance of flower-shaped ZnO was closely associated with its favorable desorption behavior to drugs, small spray plume, and few spray emitters at the tip of coated paper substrate. To illustrate the potential of flower-shaped ZnO, its coated paper was used as a substrate for the determination of various drugs in complex matrices such as serum, and a limit of detection as low as 2 pg mL -1 was achieved. The corresponding recoveries ranged from 93.2% to 107.2%. The developed protocol is promising in high-sensitivity analysis of target drugs in complex sample matrices., (© 2024 John Wiley & Sons Ltd.)

In this paper, paper microfluidic channel fabricated by directly screen-printing of polydimethylsiloxane (PDMS) is proposed for paper spray mass spectrometry analysis of therapeutic drugs in the blood samples. Compared with traditional paper spray, PDMS-printed paper spray (PP-PS) allows fluid to flow to the tip of paper with less sample loss which significantly improved the signal intensity of target compounds in blood samples. As paper can reduce the matrix effect, PP-PS also has a greater advantage than electro-spray Ionization (ESI) when directly analyzing complex biological sample in terms of the detection efficiency. Linearity and limits of detection (LOD) were evaluated for five psychotropic drugs: olanzapine, quetiapine, 9-hydroxyrisperidone, clozapine, risperidone. As a result, PP-PS improved the signal intensity of the psychotropic drugs at a concentration of 250 ng/ml in blood samples by a factor of 2-5 times and lowered the relative standard deviation (RSD) by a factor of 2-5.6 times compared with traditional paper spray. And PP-PS also improved signal intensity by a factor of 9-33 times compared with ESI. Quantitative experiments of PP-PS mass spectrometry indicated that the linear range was 5-500 ng/ml and the LOD were improved by a factor of 5-71 times for all these drugs compared with traditional paper spray. In addition, PP-PS was applied to the home-made miniaturized mass spectrometer and the precursor ions of all five psychotropic drugs (250 ng/ml) in the mass spectrometry results were obtained as well. These could prove that PP-PS has the potential to analyze complex biological samples in application on the miniaturized mass spectrometer which can be used outside the laboratory., Competing Interests: Declaration of competing interest The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to publish the results., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Sonography is a highly specialized diagnostic imaging profession facing significant workforce challenges due to increased service delivery demands and a shortage of clinical training opportunities. Developing sustainable solutions is crucial for workforce growth. Using examples from the Australian workforce and education context, this paper explores the current sonography training pathways available and the benefits and challenges of each, highlighting the importance of work-integrated learning (WIL) in facilitating the development of professional identity, clinical competence and the quality of sonographer education. Conclusions are drawn that WIL is integral to the future of the sonography profession to improve patient outcomes and address workforce shortages. However, effective implementation requires careful planning and consideration of many factors, including regulatory requirements, industry partnerships, student and supervisor/tutor support, and issues related to equitable access and participation in WIL. Key recommendations are provided to encourage ethical student learning, university-industry collaboration, effective resource allocation, and WIL-specific research.

The rapid spread of SARS-CoV-2 caused the COVID-19 pandemic and accelerated vaccine development to prevent the spread of the virus and control the disease. Given the sustained high infectivity and evolution of SARS-CoV-2, there is an ongoing interest in developing COVID-19 serology tests to monitor population-level immunity. To address this critical need, we designed a paper-based multiplexed vertical flow assay (xVFA) using five structural proteins of SARS-CoV-2, detecting IgG and IgM antibodies to monitor changes in COVID-19 immunity levels. Our platform not only tracked longitudinal immunity levels but also categorized COVID-19 immunity into three groups: protected, unprotected, and infected, based on the levels of IgG and IgM antibodies. We operated two xVFAs in parallel to detect IgG and IgM antibodies using a total of 40 μL of human serum sample in

The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom.

Paper-based microfluidic analytical devices (μPADs) have become promising alternatives to clinical laboratory-based methods for point-of-care testing (POCT) of biomarkers in family care and resource-limited communities. Here, Co-doped carbon dots (Co-CDs) nanozyme with outstanding oxidase-mimicking catalytic activity and red fluorescent emission were prepared, and combined adhered-3D μPAD (A-3D μPAD) to monitor facilely alkaline phosphatase (ALP) level in whole blood samples. Co-CDs catalyzed the oxidization of nonfluorescent o-phenylenediamine (OPD) into 2,3-diaminophenazine (oxOPD) with yellow fluorescent emission due to the generation of tremendous O 2 •- species. With addition of ALP, ALP hydrolyzed l-ascorbic acid 2-phosphate into ascorbic acid, and the latter was oxidized by Co-CDs, then reacted with OPD to form blue fluorescent emission 3-(dihydroxyethyl)furo [3,4-b]quinoxaline-1-one (DFQ). Both DFQ and oxOPD quenched the fluorescence intensity of Co-CDs via inner-filter effect. The cascade reaction of ALP/Co-CDs was incorporated into A-3D μPAD based on above sensing principles. A-3D μPAD enabled sample pretreatment, cascade reaction and signal output, and integrated portable minimized device and smartphone for visual ALP detection. The linear range and limit of detection for ALP were 0.5-150 U L -1 and 0.1 U L -1 , respectively, and the color varied from red, yellow to blue. The detection results for whole blood samples were consistent with biochemical detector. The efficiency, disposability, practicality and low-cost of A-3D μPAD can be extended to determine various biomarkers, and provided technical support for nanozyme applications in POCT environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Simple, fast and low-cost paper-based analytical devices (PADs) have a good application prospect for point-of-care detection of GSH. However, effective immobilization of functional nanomaterials onto cellulose, as a critical factor in the construction of PADs, presents numerous difficulties and challenges., Results: In this study, we have developed an exceptionally straightforward and environmentally friendly synthetic approach by using ovalbumin (OVA) as a bio-mineralization template for the preparation of MnO 2 nanosheets. The MnO 2 nanosheets produced in the solution phase exhibited excellent intrinsic nano-enzyme activity and biodegradability. The OVA-MnO 2 nanosheets can effectively oxidize Amplex red in the absence of H 2 O 2 , enabling sensitive detection of GSH with a linear range of 5 nM-10 μM and a detection limit as low as 2.8 nM. Furthermore, we utilized this method to facilitate in situ synthesis of OVA-MnO 2 nanosheets directly on paper substrates. This approach eliminates the need for conventional stirring and centrifugation steps, greatly simplifying the fabrication process while reducing material usage and time expenditure. Characterization of the chemical composition and morphology confirmed the intimate growth of the 2D nano-enzymes on the cellulose fibers. Utilizing smartphone capabilities, the OVA-MnO 2 nanosheet-modified PAD enabled instrument-free detection of GSH, demonstrating high sensitivity (0.74 μM) and a wide linear response range (1-1000 μM)., Significance: The synthesis of MnO 2 nanosheets directly on cellulose substrates substantially streamlines the modification workflow of PADs and reduces detection costs, offering new avenues for clinical diagnostics of relevant diseases., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Pulp and paper wastewater sludges are waste streams produced in major quantities across the world. The recycling of these organic sludges, for example to soil amendments, is desired in the circular economy but carries the risk of potential pollutants to be also introduced into the environment. Pulp and paper wastewater sludges have been scarcely studied matrices in the microplastic research due to their complex composition. In this study, we optimized an extraction process for microplastics from pulp and paper wastewater sludges, and quantified and characterized microplastics down to 20 μm in primary sludge and biosludge generated at the wastewater treatment plant of a multi-product pulp and paper mill in Finland. The occurrence of microplastics was high in primary sludge, 900-1600 microplastics g -1 dry weight, while the maximum number of detected microplastics in biosludge samples remained at 210 g -1 dry weight. Biosludge samples suffered from larger amounts of remaining solids after the extraction process, thus compromising the detection of smaller microplastics (<100 μm) and increasing the uncertainty related to the interpretation of the results. The most prevalent microplastic shape in all samples was fragment, and the most recurring polymer types were polyethylene and polypropylene, while a polystyrene-based copolymer represented approximately 10% of identified microplastics in primary sludge. The present study advances the development of microplastic analysis of the challenging pulp and paper wastewater sludges and brings novel information to the progressing discussion of their circulation potential., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The production of micro- and nano-fibrillated cellulose (MNFC) from paper mill sludge (PS) using simple enzymatic and mechanical treatments has been evaluated for their performance as value-added materials in packaging and other applications. Sludge from a US paper mill was analyzed for the viability of this conversion process. The enzymatic treatment was conducted at variable concentrations using an enzyme cocktail of exoglucanase and endoglucanase, followed by mechanical dual asymmetric centrifugation (DAC) treatment. The presence of inorganics and lignin facilitated the mechanical defibrillation of the fibers, making the MNFC production more energy-efficient. The prepared MNFC was characterized for fibrillation, charge, crystallinity, and surface morphology. Scanning electron microscopic (SEM) images show the highly fibrillated MNFC and the distribution of inorganic nanoparticles on the fiber surface. The X-ray diffractometric (XRD) analysis shows 44-65 % crystallinity. Furthermore, MNFC-based films derived from PS demonstrated excellent strength and flexibility, making them suitable for packaging and other applications. Overall, this conversion approach can save the paper industry millions of dollars in disposal costs while upcycling waste and reducing greenhouse gas (GHG) emissions associated with waste streams., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

A rapid user-friendly paper-based test strip using zinc microparticles in conjugation with Griess reagent was developed for nitrite and nitrate detection. Test strips were fabricated using a simple and fast method of step-by-step immersion into reagents so that each strip contained a single detection pad for nitrite detection and another separate pad for nitrate detection. To reduce nitrate to nitrite, zinc microparticles suspended in ethanolic solution of polyvinylpyrrolidone (PVP) were uniformly immobilized on the paper strips that were previously impregnated in the Griess reagent and dried. The Griess reagent components were optimized to reach the highest color intensity. The optimized test strip was able to determine both nitrite and nitrate with respective detection limits of 0.43 and 9.43 mg/kg and a detection time of 60 s. The performance of the new test strips was evaluated for the simultaneous colorimetric detection of nitrite and nitrate in water and different food samples., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Rapid and precise detection of harmful substances in food products is essential for ensuring public health and safety. This study introduces a novel surface-enhanced Raman spectroscopy (SERS) substrate, composed of a molybdenum disulfide‑silver nanocomposite, applied to flexible, water-resistant filter paper for detecting melamine and bisphenol A (BPA) in milk. Optimized molybdenum disulfide (NMS) nanoflowers (NFs) were synthesized through hydrothermal methods and high-temperature annealing, then modified with silver (Ag) nanoparticles to form the NMS-Ag nanocomposite (NMSA 6 ). This substrate greatly enhances the Raman signal, achieving an enhancement factor of approximately 1.49 × 10 7 and a detection limit as low as 10 -11  M for simultaneous multi-component analysis. Finite-difference time-domain (FDTD) simulations confirm the enhancement mechanism. The NMSA 6 substrate demonstrates remarkably low detection limits for BPA and melamine, facilitating the analysis of various hazardous substances. These findings highlight the substrate's potential for highly sensitive, label-free detection, presenting a viable tool for food safety monitoring., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)