Search

To face the climate change and carbon neutrality, reductions of energy-uses and carbon emissions are imminent. Pipe-encapsulated phase change material (PenPCM) wall is a novel envelope system with renewable energy utilizations in buildings. It combines the PCMs, nocturnal radiant cooler and gravity heat-pipe with the wall to achieve the automatic heat insulation and removal without the mechanical energy. Parameters may have influences on system performances and the parametric analysis is understudied. In this study, the influences of parameters including phase-change temperature, PCM thickness, pipe-spacings, cooler areas and orientations are investigated. The system applicability for different climate regions is also studied. Results show that, when the phase-change temperature is 27–29 °C, the ratio of the cooling load reduction to the cooling load of the conventional wall reaches largest with 17.4%. Appropriately increasing the PCM quantity can improve the thermal-storage capacity and decrease the wall temperature fluctuation. Enlarging the cooler area can increase the energy-saving effect of the PenPCM wall system. For different climate regions, the PenPCM wall system is applicable. Compared with conventional wall, the ratio of the cooling load reduction from June to September can reach 11.7%, 16.1%, 21.1%, 28.6%, 44.2% respectively for Hong Kong, Wuhan, Beijing, Harbin and Kunming. [ABSTRACT FROM AUTHOR]

[Display omitted] Energy efficiency in residential buildings can be improved considerably by optimizing the allocation of thermal resistance (R) and capacitance (C) of external walls. However, it is difficult to identify which RC allocation yields the minimum heat loss or heat gain for a given climate region, due to a lack of understanding of how regional climate affects optimal RC allocation. In this study, we determine the effect of the climate characteristics on the development of optimal RC allocation by combining the RC network model and the particle swarm optimization algorithm, taking five representative climates in different Chinese cities as examples. The energy efficiency potential and the ratio of heating to cooling load are introduced to comparatively analyse the energy savings after optimization for the five cities. The results indicate that the energy efficiency potential of residential buildings in Harbin is the largest, ranging from 6.2% to almost 20.6% for different total building capacitance. In Harbin, Beijing and Kunming, the energy efficiency potential is larger than those in Guangzhou and Shanghai, which is attributed to the larger heating to cooling load ratio of the former than that of the latter. An approximately linear relationship between the energy efficiency potential and the ratio of heating to cooling load is also built to fast predict the maximum energy savings for any given climate regions. This study could serve as useful references for the optimal design of thermal resistance and capacitance in different climate regions to save energy of residential buildings. [ABSTRACT FROM AUTHOR]

Roof receives heat directly from the solar radiation and outdoor air, and the heat transfer of the roof is often greater than that of any external wall. The building roof is usually overheated in summer, causing a great increase in the air conditioning load and negative effects on indoor thermal comfort. Thus improving the thermal insulation performance of the roof is essential for reducing air conditioning energy consumption and improving indoor thermal comfort. In this paper, an innovative pipe-embedded ventilation roof with outer-layer shape-stabilized PCM (named VRSP for short) was proposed. The heat gain is stored in the PCM to migrate excessive heat during the day and released through air ventilation at night. A three-dimensional transient-state heat transfer model of the VRSP system was built by CFD. The effects of phase transition temperature range of PCM, thickness of PCM layer and airflow rate in the ventilation duct on the thermal performance of the structure in five representative climate regions of China were evaluated. Results show that the optimum phase transition temperature ranges of PCM in severe cold region, cold region, hot summer and cold winter region, hot summer and warm winter region and mild region are 31–33 °C, 34–36 °C, 36–38 °C, 34–36 °C and 29–31 °C, respectively. The optimum thicknesses of the PCM layer are 25–30 mm, 25–30 mm, 30–35 mm, 25–30 mm and 20–25 mm, respectively. The suitable airflow rates are 1.5–1.9 m/s, 1.6–2.0 m/s, 2.1–2.5 m/s, 1.9–2.3 m/s and 1.4–1.8 m/s, respectively. The conclusion provides valuable guides for the application of VRSP under various climate conditions. • A pipe-embedded ventilation roof with shape-stabilized PCM is proposed. • Effects of physical properties of PCM and airflow rates are investigated. • The new system is optimized for its applications in different climate zones. • Considerable energy-saving effects are observed in Kunming, Harbin and Beijing. [ABSTRACT FROM AUTHOR]