Search

Black carbon (BC), an important component of atmospheric aerosol, plays a significant role in regional climate, hydrological cycle, variation of monsoon rainfall, and human health. The 40-year detailed atmospheric BC over China from 1981 to 2020 is systematically investigated through the MERRA-2 reanalysis dataset. MERRA-2 BC generally showed a good correlation (R = 0.68) compared with 673 monthly samples from ground-based observation at 35 stations around China. The overall annual average of MERRA-2 BC concentration over China is 1.15 μg/m3, with a fast growth rate during 1981–2007 and a relatively slow decrease after that. The winter season has the highest mean concentration of BC, followed by autumn and spring, whereas summer shows relatively weaker values. The order of annual average BC concentrations during 1981–2020 is Beijing-Tianjin-Hebei region (BTH, 4.02 μg/m3) > Sichuan Basin (SB, 3.94 μg/m3) > Yangtze River Delta (YRD, 2.68 μg/m3) > Pearl River Delta (PRD, 1.47 μg/m3). The monthly mean BC concentrations over the BTH, YRD, PRD and SB are estimated to be smallest 3.18 μg/m3 in May, 1.94 μg/m3 in August, 0.82 μg/m3 in July, 3.04 μg/m3 in June, respectively, whilst largest consistently in December with 5.09 μg/m3, 3.83 μg/m3, 2.12 μg/m3, and 5.41 μg/m3, respectively. Our study indicates the primary potential source areas for BC are concentrated in the research city and its surroundings. Beijing and Chengdu are more BC-polluted areas than Shanghai and Guangzhou. Long-distance, regional transfer from south BTH contributes importantly to BC pollution in Beijing under the influence of prevailing southerly winds. The geographical location of Chengdu causes the transport and accumulation of BC inside the SB. [ABSTRACT FROM AUTHOR]

Under the influence of Coronavirus Disease 2019 (COVID-19), China conducted a nationwide lockdown (LD) which significantly reduced anthropogenic emissions. To analyze the different impacts of COVID-19 on black carbon (BC) in the two representative regions in China, one-year continuous online measurements of BC were conducted simultaneously in Beijing and Tibet. The average concentration in the LD period was 20% higher than that in the pre-LD period in Beijing, which could be attributed to the increase of transport from southwestern neighboring areas and enhanced aged BC. In contrast to megacity, the average concentration of BC in Tibet decreased over 70% in the LD period, suggesting high sensitivity of plateau background areas to the anthropogenic emission reduction in South Asia. Our study clearly showed that BC responded very differently in megacity and background areas to the change of anthropogenic emission under the lockdown intervention. Plain Language Summary China has been influenced by Coronavirus Disease 2019 (COVID-19) in 2020 and the nationwide lockdown (LD) caused emission reduction from human activities. As an important component of PM2.5, black carbon (BC) can absorb light and effect the climate. It is essential to analyze the different impacts of COVID-19 on BC in the two representative regions in China. In this study, BC was measured simultaneously in Beijing and Tibet. The average concentration in the LD was 20% higher than that in the pre-LD period in Beijing, which could be attributed to the increase of transport from southwestern neighboring areas and enhanced aged BC. In contrast to megacity, the average concentration of BC in Tibet decreased over 70% in the LD period, which was mainly the result of the anthropogenic emission reduction in South Asia. Our study clearly showed that BC responded very differently in megacity and background areas to the change of anthropogenic emission, which could help to form better and more specific control strategies for BC under representative atmospheric environment in China. [ABSTRACT FROM AUTHOR]

Black carbon (BC) forms an important component of particulate matter globally, due to its impact on climate, the environment and human health. Identifying and quantifying its emission sources are critical for effective policymaking and achieving the desired reduction in air pollution. In this study, we present the first direct measurements of urban BC fluxes using eddy covariance. The measurements were made over Beijing within the UK-China Air Pollution and Human Health (APHH) winter 2016 and summer 2017 campaigns. In both seasons, the mean measured BC mass (winter: 5.49 ng m -2 s -1 , summer: 6.10 ng m -2 s -1) and number fluxes (winter: 261.25 particles cm -2 s -1 , summer: 334.37 particles cm -2 s -1) were similar. Traffic was determined to be the dominant source of the BC fluxes measured during both seasons. The total BC emissions within the 2013 Multi-resolution Emission Inventory for China (MEIC) are on average too high compared to measured fluxes by a factor of 58.8 (winter) and 47.2 (summer). Only a comparison with the MEIC transport sector shows that emissions are also larger (factor of 37.5 in winter and 37.7 in summer) than the measured flux. Emission ratios of BC / NO x and BC / CO are comparable to vehicular emission control standards implemented in January 2017 for gasoline (China 5) and diesel (China V) engines, indicating a reduction of BC emissions within central Beijing, and extending this to a larger area would further reduce total BC concentrations. [ABSTRACT FROM AUTHOR]

Black carbon (BC) is one of the most important climate pollutants due to its strong positive radiative forcing on the climate system. However, long-term observation of BC is inadequate, and its trend remains unknown at both regional and global scales. In this study, using quality-controlled ground-based black carbon observations at 34 stations, the climatology of BC mass concentration during 2006–2017 in China was evaluated for the first time. The national annual average BC concentration was 3534 ng/m3, and the concentration exhibited large spatial variation, from a minimum of 272 ng/m3 to a maximum of 10,228 ng/m3. Significant seasonal variations were also observed. The peak BC concentration (4763 ± 3380 ng/m3) occurred during winter, followed by autumn (3752 ± 2623 ng/m3) and spring (3022 ± 2121 ng/m3). The lowest BC concentration occurred in summer (2583 ± 1780 ng/m3) due to decreased emissions, wet removal by precipitation, and diffusion induced by strong turbulent mixing. Additionally, the diurnal variability at about 80% of the stations in China showed a bimodal pattern. Daily maximum BC concentration during 0000–0600, 0600–1200, 1200–1800, and 1800–2400 local solar time accounted for 0, 41, 12, and 47% of the total, respectively. In particular, the diurnal and monthly variations in BC were explicitly analyzed at seven baseline stations. Surface BC has exhibited a significant declining trend across China, which is partly corroborated by the increase in single scattering albedo during the same period in Beijing. Also, the BC radiative forcing at the top of the atmosphere has declined at the rate of − 0.9 ± 0.1 W/m2/10 years over China, which differs from with the trend in the simulation using the CMIP6 emission. The decreasing BC has led to a larger reduction rate in atmospheric heating (− 3.7 ± 0.4 W/m2/10 years), implying a less stable atmosphere that facilitates the dispersion of air pollutants. The declining BC burden implies for both the air quality in China and regional climate change. [ABSTRACT FROM AUTHOR]

Worldwide epidemiological studies have demonstrated that short-term associations of particulate matter (PM), might be further complicated by ambient temperatures, and increase human mortality. In China, among various PM indices, the health effects of black carbon (BC) are less understood due to the lack of data availability. Additionally, it is unclear how temperature modifies simultaneous and adverse effects of BC, and fine (PM size <2.5 μm; PM 2.5), and coarse particles (PM 2.5-10), on mortality outcomes. We adopted time-series Poisson generalized additive models to investigate temperature modifying effects on the association between three different PMs (BC, PM 2.5 , and PM 2.5-10) and mortality (non-accidental, respiratory and cardiovascular mortality) in Beijing, China, from 2010 to 2016. Average daily BC, PM 2.5 , and PM 2.5-10 concentrations were 4.95, 72.3, and 52.1 μg/m3, respectively, which were all significantly associated with daily mortality. High temperature strongly amplified effects of BC, PM 2.5 , and PM 2.5-10 on human mortality, especially BC effects that were most pronounced at >28 °C. Harmful effects were estimated for increases in non-accidental, respiratory, and cardiovascular mortality per interquartile increments in BC (4.11 μg/m3), PM 2.5 (62.37 μg/m3), and PM 2.5-10 (46.71 μg/m3) concentrations from the moving average of current and previous day (lag01) under high temperature (>28 °C). Mortality increases in non-accidental, respiratory, and cardiovascular categories were 5.12% (95% confidence interval [CI]: 4.79, 5.45), 7.41% (95%CI: 6.42, 8.40), and 6.36% (95%CI: 2.45, 10.3) for BC; 3.85% (95%CI: 3.27, 4.43), 6.64% (95%CI: 5.63, 7.65), and 4.54% (95%CI: 3.31, 5.78) for PM 2.5 ; and 2.56% (95%CI: 1.45, 3.67), 3.41% (95%CI: 1.53, 5.29), and 3.19% (95%CI: 2.44, 3.94), for PM 2.5-10 , respectively. These findings suggest that controlling the emission of ambient particles, especially BC, and improving air quality during summer would substantially benefit population health. Furthermore, BC should be considered as a crucial air quality indicator to reflect PM health risk. Image 1 • To test the synergistic effects of temperature and black carbon (BC) on mortality. • High temperature amplified the harmful effects of BC and PM on mortality. • The modifying effects of temperature on BC were different from that on PMs. [ABSTRACT FROM AUTHOR]