Search

The unmanned aerial vehicle (UAV) technique provides a potential solution to scalable wireless edge networks. This paper uses two UAVs, with accelerated motions and fixed altitudes, to realize a wireless edge network, where one UAV forwards downlink signals to user terminals (UTs) distributed over an area while the other one collects uplink data. The conditional average achievable rates, as well as their lower bounds, of both the uplink and downlink transmission are derived considering the active probability of UTs and the service queues of two UAVs. In addition, a problem aiming to maximize the energy efficiency of the whole system is formulated, which takes into account communication related energy and propulsion energy consumption. Then, we develop a novel multi-agent Q-learning (MA-QL) algorithm to maximize the energy efficiency, through optimizing the trajectory and transmit power of the UAVs. Finally, simulation results are conducted to verify our analysis and examine the impact of different parameters on the downlink and uplink achievable rates, UAV energy consumption, and system energy efficiency. It is demonstrated that the proposed algorithm achieves much higher energy efficiency than other benchmark schemes. [ABSTRACT FROM AUTHOR]

Intelligent reflecting surface (IRS) cooperated with the simultaneous wireless information and power transfer (SWIPT) can reinforce the desired signal and deal with the energy supply problem effectively. By leveraging the on-demand mobility of unmanned aerial vehicles (UAVs), the IRS cooperated SWIPT can be deployed in more flexible and reliable scenarios. In this article, we investigate the UAV-mounted IRS-assisted SWIPT for Internet of Things (IoT) networks. In particular, a UAV-mounted IRS is deployed to assist the information transmission and power transfer from the access point to several IoT devices simultaneously. Taking full advantage of the UAV-mounted IRS in attending multiple IoT devices flexibly, a time division multiple access (TDMA)-based scheduling protocol is proposed to serve different IoT devices alternatively during the UAV flying along an optimized trajectory with the information and power transfer executed. Then, an optimization problem of maximizing the minimum average achievable rate of multiple devices is formulated with the specific energy harvesting requirement guaranteed. To solve the nonconvex problem, we leverage the successive convex approximation and block coordinate descent methods to develop an iterative algorithm. Simulation results demonstrate that with the help of the more flexible and reliable UAV-mounted IRS, the minimum achievable rate of the IoT network can be significantly improved. [ABSTRACT FROM AUTHOR]

Due to their promising applications and intriguing characteristics, Unmanned Aerial Vehicles (UAVs) can be dispatched as flying base stations to serve multiple energy-constrained Internet-of-Things (IoT) sensors. Moreover, to ensure fresh data collection while providing sustainable energy support to a large set of IoT devices, a required number of UAVs should be deployed to carry out these two tasks efficiently and promptly. Indeed, the data collection requires that UAVs first make Wireless Energy Transfer (WET) to supply IoT devices with the necessary energy in the downlink. Then, IoT devices perform Wireless Information Transmission (WIT) to UAVs in the uplink based on the harvested energy. However, it turns out that when the same UAV performs WIT and WET, its energy usage and the data collection time are severely penalized. Worse yet, it is difficult to efficiently coordinate between UAVs to improve the performance in terms of WET and WIT. This work proposes to divide UAVs into two teams to behave as data collectors and energy transmitters, respectively. A Multi-Agent Deep Reinforcement Learning (MADRL) method, called TEAM, is leveraged to jointly optimize both teams’ trajectories, minimize the expected Age of Information (AoI), maximize the throughput of IoT devices, minimize the energy utilization of UAVs, and enhance the energy transfer. Simulation results depict that TEAM can effectively synchronize UAV teams and adapt their trajectories while serving a large-scale dynamic IoT environment. [ABSTRACT FROM AUTHOR]

This paper studies the three-dimensional (3D) trajectory optimization problem for unmanned aerial vehicle (UAV) aided wireless communication. Existing works mainly rely on the kinematic equations for UAV’s mobility modeling, while its dynamic equations are usually missing. As a result, the planned UAV trajectories are piece-wise line segments in general, which may be difficult to implement in practice. By leveraging the concept of state-space model, a control-based UAV trajectory design is proposed in this paper, which takes into account both of the UAV’s kinematic equations and the dynamic equations. Consequently, smooth trajectories that are amenable to practical implementation can be obtained. Moreover, the UAV’s controller design is achieved along with the trajectory optimization, where practical roll angle and pitch angle constraints are considered. Furthermore, a new energy consumption model is derived for quad-rotor UAVs, which is based on the voltage and current flows of the electric motors and thus captures both the consumed energy for motion and the energy conversion efficiency of the motors. Numerical results are provided to validate the derived energy consumption model and show the effectiveness of our proposed algorithms. [ABSTRACT FROM AUTHOR]

We investigate a transmission mechanism aiming to improve the data rate between a base station (BS) and a user equipment (UE) through deploying multiple relaying UAVs. We consider the effect of interference incurred by another established communication network, which makes our problem challenging and different from the state of the art. We aim to design the 3D trajectories and power allocation for the UAVs to maximize the data flow of the network while keeping the interference on the existing communication network below a threshold. We utilize the mobility feature of the UAVs to evade the (un)-intended interference caused by (un)-intentional interferers. To this end, we propose an alternating-maximization approach to jointly obtain the 3D trajectories and the UAVs transmission powers. We handle the 3D trajectory design by resorting to spectral graph theory and subsequently address the power allocation through convex optimization techniques. We also approach the problem from the intentional interferer’s perspective where smart jammers chase the UAVs to effectively degrade the data flow of the network. We also extend our work to the case for multiple UEs. Finally, we demonstrate the efficacy of our proposed method through extensive simulations. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicle (UAV)-aided two-way relay networks with multiple terrestrial user pairs is investigated, where a fix-wing UAV is served as a two-way relay to assist information transmission. We aim to maximize the total rate of the two-way relay networks while the quality of service (QoS) being guaranteed. A novel relay strategy, namely time-slots pairing, is proposed by exploiting physical-layer network coding (PNC) protocol. Specifically, the UAV receives and buffers the signals from the scheduled user pair when the UAV approaches one of them, then forwards the modulated signal when the UAV is close to the other. As a result, a non-convex total rate maximization problem is formulated by joint trajectory design and resource optimization. To solve this problem, we first decompose it into three sub-problems, and then a three-step iterative algorithm that can effectively handle the non-convex problem with no worse than a polynomial complexity is developed leveraging the block coordinate descent (BCD) technique and successive convex approximation (SCA) method. Simulation results finally illustrate that: 1) Compared with amplify-and-forward (AF) or decode-and-forward (DF) protocols, the proposed design based on PNC protocol can significantly improve the total rate of the two-way relay networks; 2) the time-slots pairing relay strategy always achieves a significant enhancement on performance than the traditional non-time-slots pairing relay strategy; 3) the time-slots pairing relay strategy is more favorable for the mobile PNC relay networks since it can well resist the degradation of the entire networks caused by users’ increased service quality requirements. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicles (UAVs) have attacted much attention in the field of wireless communication due to its agility and altitude. UAVs can be used as low-altitude aerial base stations (UAV-BSs) to provide communication services for ground devices (GDs) in various scenarios, such as emergency communication and traffic offloading in hotspots. However, due to the limited communication ranges and high prices of commercial UAV-BSs, covering a target area all the time with sufficient UAVs is quite challenging, especially under dynamic environment. We need to design the trajectory of the UAV-BSs to optimize system performance. Most existing works focus on the energy-efficient coverage and throughput maximization but ignore the fairness of communication service, especially the fairness at user-level. Besides, reinforcement learning is suitable for solving decision problems in dynamic environments. However, most existing works use centralized deep reinforcement learning (DRL) approaches. Due to the scalability and low time complexity, a distributed DRL approach is more suitable for multiple UAV-BSs communication system in dynamic environment. Unlike previous works, we characterize the fairness at user-level based on proportional fairness scheduling and formulate a weighted-throughput maximization problem via designing UAV-BSs’ trajectory. Then we model the dynamic deploymentproblem of UAV-BSs as a Markov game and propose a multi-agent deep reinforcement learning-based distributed UAV-BSs control approach named MAUC. MAUC approach adopts the framework of centralized training with distributed execution. Simulation results show that the MAUC can improve fairness of communication service by sacrificing a small amount of throughput. [ABSTRACT FROM AUTHOR]

With the high altitude and flexible mobility, unmanned aerial vehicle (UAV) assisted mobile edge computing (MEC) is becoming a promising technology to cope with the computation-intensive and latency-critical task in prospective Internet of Things. In this paper, we propose a novel MEC system with several ground servers at access points and one aerial server carried by UAV. To balance the vital metrics of the MEC system, computation bits and energy consumption, we aim to maximize the weighted computation efficiency of the system, subject to the constraints on communication and computation resources, minimum computation requirement and UAV’s mobility. To this end, a joint optimization problem with the goal of weighted computation efficiency maximization is formulated. First, we analyze the problem and transform it into an equivalent tractable form. Then, we solve the challenging non-convex problem by jointly optimizing the computation task assignment, time slot partition, transmission bandwidth and CPU frequency allocation, transmit power allocation, and UAV’s trajectory, based on the Dinkelbach’s method, Lagrange duality and successive convex approximation technique. Furthermore, we propose an alternative computation efficiency maximization algorithm, followed by the convergence and complexity analysis. Finally, numerical simulations show that our proposed algorithm significantly improves the computation efficiency compared to benchmark schemes. It is also validated that the proposed algorithm effectively obtains a good tradeoff between the computation task bits and energy consumption of the system. [ABSTRACT FROM AUTHOR]

In this letter, we investigate an unmanned aerial vehicle (UAV) enabled wireless powered communication network (WPCN), in which the UAV first employs the radio frequency (RF) signal to power ground users, and then the users communicate with the UAV by using the harvested energy. The sum rate maximization problem in WPCN suffers doubly near-far effect caused by the double signal propagation loss in both the energy harvesting and communication stage. It is generally believed that this effect can be alleviated by integrating UAV into WPCN, thanks to its flexible deployment. However, due to the lack of analytical solution in state-of-art research, it is still unclear how to quantify the advantage that the mobility of UAV brings to migrating the doubly near-far effect. To address this issue, by showing that the optimal UAV trajectory has a multi-location hovering structure, we first derive the closed-form optimal solution of resource allocation, as a function of the UAV hovering location for downlink wireless power transfer (WPT). We then prove that the UAV in our case only needs to hover at a single location for WPT. More importantly, it is explicitly shown that the doubly near far effect can be alleviated into near-far effect. Simulation results validate our analysis. [ABSTRACT FROM AUTHOR]

Due to the small size, low cost, and autonomous nature, unmanned aerial vehicles (UAVs) have attracted growing attention in improving traditional networks’ performance. This paper considers a multi-UAV enabled large-scale wireless recharge networks, where a group of UAVs is dispatched as mobile wireless power transfer, and information collection systems to serve a set of ground low-power sensor nodes. Specifically, the UAVs employ radio frequency (RF) wireless power transfer (WPT) to supply energy towards the sensor nodes, and the communication services are available via wireless information transfer (WIT) systems. To achieve balanced energy consumption among UAVs, we maximize the energy utilization efficiency of UAVs, and minimize the communication delay by optimizing the trajectory jointly with constraints of the energy capacity, and the area of the target region. The formulated problem is a mixed-integer programming problem that is a variation of multiple traveling salesman problem. Thus we present a heuristic algorithm that combines the evolutionary algorithm, and variable neighborhood search to achieve the optimal visited sequence of the sensor nodes. Finally, extensive numerical results are provided to evaluate the performance of the proposed algorithm. It draws new insights on the estimation of the feasibility of the given UAVs whose energy capacity is limited. [ABSTRACT FROM AUTHOR]

With the exponential growth of data traffic, caching is regarded as a promising solution to combine with unmanned aerial vehicle (UAV)-assisted networks, which can offload cellular traffic and improve the system performance. Moreover, the cache capacity at user side can be leveraged, e.g., through local data storage or device-to-device (D2D) sharing. In this paper, we focus on the performance analysis and trajectory optimization of cache-enabled UAV-assisted networks with underlaid D2D communications. We consider both static and dynamic UAV deployments. For static UAV deployment, we first formulate an optimization problem to design the cache placement in order to maximize the cache hit probability. Then, the successful transfer probability (STP) and sum-rate are analyzed by using stochastic geometry, and their closed-form expressions are derived. For dynamic UAV deployment, the UAV moves over the cell and stops at several path points to serve users. To shorten the time required for the UAV to cover all users, a spiral algorithm is proposed to optimize the UAV trajectory, aiming at minimizing the number of UAV path points. Moreover, since at different locations, the UAV communication will incur different interference on D2D users, we derive the outage probability for the D2D users. Simulation results show the significant performance gain of our proposed probabilistic cache placement over existing strategies. For a given user density, we show that the optimal values for the UAV height which lead to the maximum UAV-STP and sum-rate exist. [ABSTRACT FROM AUTHOR]

This paper considers a rotary-wing unmanned aerial vehicle (UAV)-enabled wireless power transfer system, where a UAV is dispatched as an energy transmitter (ET), transferring radio frequency (RF) signals to a set of energy receivers (ERs) periodically. We aim to maximize the energy harvested at all ERs by jointly optimizing the UAV's three-dimensional (3D) placement, beam pattern and charging time. However, the considered optimization problem taking into account the drone flight altitude and the wireless coverage performance is formulated as a non-convex problem. To tackle this problem, we propose a low-complexity iterative algorithm to decompose the original problem into four sub-problems in order to optimize the variables sequentially. In particular, we first use the sequential unconstrained convex minimization based algorithm to find the globally optimal UAV two-dimensional (2D) position. Subsequently, we can directly obtain the optimal UAV altitude as the objective function of problem is monotonic decreasing with respect to UAV altitude. Then, we propose the multiobjective evolutionary algorithm based on decomposition (MOEA/D) based algorithm to control the phase of antenna array elements, in order to achieve high steering performance of multi-beams. Finally, with the above solved variables, the original problem is reformulated as a single-variable optimization problem where charging time is the optimization variable, and can be solved using the standard convex optimization techniques. Furthermore, we use the branch and bound method to design the UAV trajectory which can be constructed as traveling salesman problem (TSP) to minimize flight distance. Numerical results validate the theoretical findings and demonstrate that significant performance gain in terms of sum received power of ERs can be achieved by the proposed algorithm in UAV-enabled wireless power transfer networks. [ABSTRACT FROM AUTHOR]

In the past several years, unmanned aerial vehicle (UAV) have been employed to provide enhanced coverage or relay service to mobile users in a scenario with limited or even no infrastructure since they can be deployed to almost everywhere and can be manipulated at anytime. This paper studies UAV as aerial base station (BS) enabled wireless communication system, where a UAV is dispatched to provide wireless communication service to a set of ground users with difference quality-of-experience (QoE) requirements. In real world, user requirements are randomly and unevenly distributed. In addition, UAV communication coverage and on-board energy are limited and system resources are also limited (e.g., transmission power, spectrum). In order to meet the QoE of all users with limited system resources and limited UAV energy, we jointly optimize user communication scheduling, UAV trajectory, transmit power and bandwidth allocation to maximize energy-efficiency and satisfy user QoE requirement. The formulated problem is mixes integer non-convex and non-concave so it is difficult to solve. In this paper, we solvevv the problem with two steps as follows. Firstly, we transform the objective function into a tractable form. Secondly, we divide the optimal problem into four sub-optimal problems, and then use a powerful iterative algorithm with the Dinkelbach and block coordinate descent to solve the optimal problem. That is to say, the user scheduling, UAV trajectory, transmission power and bandwidth allocation are alternately optimized in each iteration. Extensive simulation results present that our proposed method can obtain higher energy efficiency than that of baselines. Specifically, the energy efficiency obtained by our proposed method is 12.5% higher than the approach that only maximizes throughput. [ABSTRACT FROM AUTHOR]

This paper studies an unmanned aerial vehicle (UAV)-enabled two-user interference channel for wireless powered communication networks (WPCNs). In this system, two UAVs wirelessly charge two low-power Internet-of-things (IoT)-devices on the ground and collect information from them. We consider two scenarios when both UAVs cooperate in energy transmission and/or information reception via interference coordination and coordinated multi-point (CoMP), respectively. For both scenarios, the UAVs’ trajectories are designed to not only enhance the wireless power transfer (WPT) efficiency in the downlink, but also mitigate the co-channel interference for wireless information transfer (WIT) in the uplink. In particular, the objective is to maximize the uplink common (minimum) throughput of the two IoT-devices over a finite UAV mission period, by jointly optimizing the trajectories of both UAVs and the downlink/uplink wireless resource allocation, subject to the maximum flying speed and collision avoidance constraints for UAVs, as well as the individual energy neutrality constraints at IoT-devices. Under both scenarios with interference coordination and CoMP, we first obtain the optimal solutions to the two common-rate maximization problems for the special case with sufficiently long UAV mission duration. Next, we obtain high-quality solutions for the practical case with finite UAV mission duration by using the alternating optimization and successive convex approximation (SCA). Numerical results show that the proposed designs significantly outperform benchmark schemes, and the utilization of CoMP achieves much higher uplink throughput than interference coordination. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) have found numerous applications and are expected to bring fertile business opportunities in the next decade. Among various enabling technologies for UAVs, wireless communication is essential and has drawn significantly growing attention in recent years. Compared to the conventional terrestrial communications, UAVs’ communications face new challenges due to their high altitude above the ground and great flexibility of movement in the 3-D space. Several critical issues arise, including the line-of-sight (LoS) dominant UAV-ground channels and induced strong aerial-terrestrial network interference, the distinct communication quality-of-service (QoS) requirements for UAV control messages versus payload data, the stringent constraints imposed by the size, weight, and power (SWAP) limitations of UAVs, as well as the exploitation of the new design degree of freedom (DoF) brought by the highly controllable 3-D UAV mobility. In this article, we give a tutorial overview of the recent advances in UAV communications to address the above issues, with an emphasis on how to integrate UAVs into the forthcoming fifth-generation (5G) and future cellular networks. In particular, we partition our discussion into two promising research and application frameworks of UAV communications, namely UAV-assisted wireless communications and cellular-connected UAVs, where UAVs are integrated into the network as new aerial communication platforms and users, respectively. Furthermore, we point out promising directions for future research. [ABSTRACT FROM AUTHOR]

Energy consumption is one of the important design aspect for data collection in wireless sensor networks (WSNs). This paper studies data collection from a set of sensor nodes (SNs) in WSNs enabled by multiple unmanned aerial vehicles (UAVs). We aim to minimize the maximum mission completion time among all UAVs by jointly optimizing the UAV trajectory, as well as the wake-up scheduling and association for SNs, while ensuring that each SN can successfully upload the targeting amount of data with a given energy budget. The formulated problem is a non-convex problem which is difficult to be solved directly. To tackle this problem, we first propose a simple scheme that each UAV only collects data while hovering, termed as hovering mode (Hmode). For this mode, in order to find the optimized hovering locations for each SN and the serving order among all locations, we propose an efficient algorithm by leveraging the min–max multiple Traveling Salesman Problem (min–max m-TSP) and convex optimization techniques. Furthermore, we propose the more general scheme that enables continuous data collection even while flying, termed as flying mode (Fmode). By leveraging bisection method and time discretization technique, the original problem is transformed into a discretized equivalent with a finite number of optimization variables, based on which a Karush–Kuhn–Tucker (KKT) solution is obtained by applying the successive convex approximation (SCA) technique. The simulation results show that the proposed multi-UAV enabled data collection with joint trajectory and communication design achieves significant performance gains over the benchmark schemes. [ABSTRACT FROM AUTHOR]

This paper studies unmanned aerial vehicle (UAV)-enabled wireless communication, where a rotary-wing UAV is dispatched to communicate with multiple ground nodes (GNs). We aim to minimize the total UAV energy consumption, including both propulsion energy and communication related energy, while satisfying the communication throughput requirement of each GN. To this end, we first derive a closed-form propulsion power consumption model for rotary-wing UAVs, and then formulate the energy minimization problem by jointly optimizing the UAV trajectory and communication time allocation among GNs, as well as the total mission completion time. The problem is difficult to be optimally solved, as it is non-convex and involves infinitely many variables over time. To tackle this problem, we first consider the simple fly-hover-communicate design, where the UAV successively visits a set of hovering locations and communicates with one corresponding GN while hovering at each location. For this design, we propose an efficient algorithm to optimize the hovering locations and durations, as well as the flying trajectory connecting these hovering locations, by leveraging the travelling salesman problem with neighborhood and convex optimization techniques. Next, we consider the general case, where the UAV also communicates while flying. We propose a new path discretization method to transform the original problem into a discretized equivalent with a finite number of optimization variables, for which we obtain a high-quality suboptimal solution by applying the successive convex approximation technique. The numerical results show that the proposed designs significantly outperform the benchmark schemes. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAVs) are anticipated to be widely deployed in future wireless communications, due to their advantages of high mobility and easy deployment. However, the broadcast nature of air-to-ground line-of-sight wireless channels brings a new challenge to the information security of UAV-ground communication. This paper tackles such a challenge in the physical layer by exploiting the mobility of UAV via its trajectory design. We consider a UAV-ground communication system with multiple potential eavesdroppers on the ground, where the information on the locations of the eavesdroppers is imperfect. We formulate an optimization problem, which maximizes the average worst case secrecy rate of the system by jointly designing the robust trajectory and transmit power of the UAV over a given flight duration. The nonconvexity of the optimization problem and the imperfect location information of the eavesdroppers make the problem difficult to be solved optimally. We propose an iterative suboptimal algorithm to solve this problem efficiently by applying the block coordinate descent method, $\mathcal {S}$ -procedure, and successive convex optimization method. Simulation results show that the proposed algorithm can improve the average worst case secrecy rate significantly, as compared to two other benchmark algorithms without robust design. [ABSTRACT FROM AUTHOR]

This paper studies an unmanned aerial vehicle (UAV)-enabled multicasting system, where a UAV is dispatched to disseminate a common file to a set of ground terminals (GTs). We aim to design the UAV trajectory to minimize its mission completion time, while ensuring that each GT successfully recovers the file with a desired high probability. The formulated problem is nonconvex and difficult to be solved in its original form. Therefore, we first derive an effective lower bound for the success file recovery probability of each GT. The problem is then reformulated in a more tractable form, where the UAV trajectory only needs to be designed to ensure the minimum connection time constraint with each GT, during which their distance is below a certain threshold. We show that without loss of optimality, the UAV trajectory consists of connected line segments only, which can be obtained by determining the optimal set of waypoints as well as the UAV speed along the path connecting the waypoints. We propose efficient schemes for the waypoint design based on a novel concept of virtual base station placement and by applying convex optimization. Furthermore, for fixed waypoints, the optimal UAV speed is efficiently obtained by solving a linear programming problem. Numerical results show that the proposed UAV-enabled multicasting with optimized trajectory design achieves significant performance gains over other benchmark schemes. [ABSTRACT FROM PUBLISHER]